diff mbox series

[1/3] dt-bindings: media: renesas-ceu: Refer to video-interfaces.txt

Message ID 1536847191-17175-2-git-send-email-jacopo+renesas@jmondi.org (mailing list archive)
State New, archived
Headers show
Series media: renesas-ceu: Introduce default mbus configuration | expand

Commit Message

Jacopo Mondi Sept. 13, 2018, 1:59 p.m. UTC 
Refer to video-interfaces.txt when describing standard properties.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
 Documentation/devicetree/bindings/media/renesas,ceu.txt | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/media/renesas,ceu.txt b/Documentation/devicetree/bindings/media/renesas,ceu.txt
index 8a7a616..23e91106 100644
--- a/Documentation/devicetree/bindings/media/renesas,ceu.txt
+++ b/Documentation/devicetree/bindings/media/renesas,ceu.txt
@@ -17,15 +17,15 @@  Required properties:
 The CEU supports a single parallel input and should contain a single 'port'
 subnode with a single 'endpoint'. Connection to input devices are modeled
 according to the video interfaces OF bindings specified in:
-Documentation/devicetree/bindings/media/video-interfaces.txt
+[1] Documentation/devicetree/bindings/media/video-interfaces.txt
 
 Optional endpoint properties applicable to parallel input bus described in
 the above mentioned "video-interfaces.txt" file are supported.
 
-- hsync-active: Active state of the HSYNC signal, 0/1 for LOW/HIGH respectively.
-  If property is not present, default is active high.
-- vsync-active: Active state of the VSYNC signal, 0/1 for LOW/HIGH respectively.
-  If property is not present, default is active high.
+- hsync-active: See [1] for description. If property is not present,
+  default is active high.
+- vsync-active: See [1] for description. If property is not present,
+  default is active high.
 
 Example: