Message ID | 1559815233-24796-3-git-send-email-louis.kuo@mediatek.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | media: support Mediatek sensor interface driver | expand |
On Thu, Jun 06, 2019 at 06:00:31PM +0800, Louis Kuo wrote: > This patch adds KConfig for sensor interface driver. Sensor interface > driver > is a MIPI-CSI2 host driver, namely, a HW camera interface controller. > It support a widely adopted, simple, high-speed protocol primarily > intended > for point-to-point image and video transmission between cameras and host > devices. > > Signed-off-by: Louis Kuo <louis.kuo@mediatek.com> > --- > drivers/media/platform/mtk-isp/Kconfig | 17 +++++++++++++++++ > 1 file changed, 17 insertions(+) > create mode 100644 drivers/media/platform/mtk-isp/Kconfig > > diff --git a/drivers/media/platform/mtk-isp/Kconfig b/drivers/media/platform/mtk-isp/Kconfig > new file mode 100644 > index 0000000..bc7fd01 > --- /dev/null > +++ b/drivers/media/platform/mtk-isp/Kconfig > @@ -0,0 +1,17 @@ > +config MTK_SENINF > + bool "Mediatek mipi csi2 driver" > + depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API > + depends on MEDIA_CAMERA_SUPPORT > + select V4L2_FWNODE > + > + default n > + help > + This driver provides a mipi-csi2 host driver used as a > + interface to connect camera with Mediatek's > + MT8183 SOCs. It is able to handle multiple cameras > + at the same time. > + > + Choose y if you want to use Mediatek SoCs to create image > + capture application such as video recording and still image > + capture. Rather than being a separate patch, this should go in with the driver. The DT bindings should precede the driver, and you'll need a MAINTAINERS entry for the driver, too.
diff --git a/drivers/media/platform/mtk-isp/Kconfig b/drivers/media/platform/mtk-isp/Kconfig new file mode 100644 index 0000000..bc7fd01 --- /dev/null +++ b/drivers/media/platform/mtk-isp/Kconfig @@ -0,0 +1,17 @@ +config MTK_SENINF + bool "Mediatek mipi csi2 driver" + depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + depends on MEDIA_CAMERA_SUPPORT + select V4L2_FWNODE + + default n + help + This driver provides a mipi-csi2 host driver used as a + interface to connect camera with Mediatek's + MT8183 SOCs. It is able to handle multiple cameras + at the same time. + + Choose y if you want to use Mediatek SoCs to create image + capture application such as video recording and still image + capture. +
This patch adds KConfig for sensor interface driver. Sensor interface driver is a MIPI-CSI2 host driver, namely, a HW camera interface controller. It support a widely adopted, simple, high-speed protocol primarily intended for point-to-point image and video transmission between cameras and host devices. Signed-off-by: Louis Kuo <louis.kuo@mediatek.com> --- drivers/media/platform/mtk-isp/Kconfig | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 drivers/media/platform/mtk-isp/Kconfig