Message ID | 1600693440-3015-2-git-send-email-dikshita@codeaurora.org (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | Add new controls for QP and layer bitrate | expand |
On 21/09/2020 15:03, Dikshita Agarwal wrote: > - Adds min/max qp controls for B frame for h264. > - Adds min/max qp controls for I/P/B frames for hevc similar to h264. > - Update valid range of mim/max qp for hevc to accommodate 10 bit. > > Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org> > --- > .../userspace-api/media/v4l/ext-ctrls-codec.rst | 54 +++++++++++++++++++++- > drivers/media/v4l2-core/v4l2-ctrls.c | 8 ++++ > include/uapi/linux/v4l2-controls.h | 9 ++++ > 3 files changed, 69 insertions(+), 2 deletions(-) > > diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst > index ce728c75..26f8220 100644 > --- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst > +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst > @@ -1182,6 +1182,18 @@ enum v4l2_mpeg_video_h264_entropy_mode - > V4L2_CID_MPEG_VIDEO_H264_MAX_QP is also set, the quantization parameter > should be chosen to meet both requirements. > > +``V4L2_CID_MPEG_VIDEO_H264_B_FRAME_MIN_QP (integer)`` > + Minimum quantization parameter for the H264 B frame to limit B frame > + quality to a range. Valid range: from 0 to 51. If > + V4L2_CID_MPEG_VIDEO_H264_MIN_QP is also set, the quantization parameter > + should be chosen to meet both requirements. > + > +``V4L2_CID_MPEG_VIDEO_H264_B_FRAME_MAX_QP (integer)`` > + Maximum quantization parameter for the H264 B frame to limit B frame > + quality to a range. Valid range: from 0 to 51. If > + V4L2_CID_MPEG_VIDEO_H264_MAX_QP is also set, the quantization parameter > + should be chosen to meet both requirements. > + > ``V4L2_CID_MPEG_VIDEO_MPEG4_I_FRAME_QP (integer)`` > Quantization parameter for an I frame for MPEG4. Valid range: from 1 > to 31. > @@ -3441,11 +3453,13 @@ HEVC/H.265 Control IDs > > ``V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP (integer)`` > Minimum quantization parameter for HEVC. > - Valid range: from 0 to 51. > + Valid range: from 0 - 51 for 8 bit and > + 0 - 63 for 10 bit. This can be on one line. > > ``V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP (integer)`` > Maximum quantization parameter for HEVC. > - Valid range: from 0 to 51. > + Valid range: from 0 - 51 for 8 bit and > + 0 - 63 for 10 bit Same here, but this is also missing a period at the end. > > ``V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_QP (integer)`` > Quantization parameter for an I frame for HEVC. > @@ -3462,6 +3476,42 @@ HEVC/H.265 Control IDs > Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP, > V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP]. > > +``V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_MIN_QP (integer)`` > + Minimum quantization parameter for the HEVC I frame to limit I frame > + quality to a range. Valid range: from 0 to 51 for 8 bit, 0 - 63 for 10 bit. > + If V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP is also set, the quantization parameter > + should be chosen to meet both requirements. > + > +``V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_MAX_QP (integer)`` > + Maximum quantization parameter for the HEVC I frame to limit I frame > + quality to a range. Valid range: from 0 to 51 for 8 bit, 0 - 63 for 10 bit. > + If V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP is also set, the quantization parameter > + should be chosen to meet both requirements. > + > +``V4L2_CID_MPEG_VIDEO_HEVC_P_FRAME_MIN_QP (integer)`` > + Minimum quantization parameter for the HEVC P frame to limit P frame > + quality to a range. Valid range: from 0 to 51 for 8 bit, 0 - 63 for 10 bit. > + If V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP is also set, the quantization parameter > + should be chosen to meet both requirements. > + > +``V4L2_CID_MPEG_VIDEO_HEVC_P_FRAME_MAX_QP (integer)`` > + Maximum quantization parameter for the HEVC P frame to limit P frame > + quality to a range. Valid range: from 0 to 51 for 8 bit, 0 - 63 for 10 bit. > + If V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP is also set, the quantization parameter > + should be chosen to meet both requirements. > + > +``V4L2_CID_MPEG_VIDEO_HEVC_B_FRAME_MIN_QP (integer)`` > + Minimum quantization parameter for the HEVC B frame to limit B frame > + quality to a range. Valid range: from 0 to 51 for 8 bit, 0 - 63 for 10 bit. > + If V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP is also set, the quantization parameter > + should be chosen to meet both requirements. > + > +``V4L2_CID_MPEG_VIDEO_HEVC_B_FRAME_MAX_QP (integer)`` > + Maximum quantization parameter for the HEVC B frame to limit B frame > + quality to a range. Valid range: from 0 to 51 for 8 bit, 0 - 63 for 10 bit. > + If V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP is also set, the quantization parameter > + should be chosen to meet both requirements. > + > ``V4L2_CID_MPEG_VIDEO_HEVC_HIER_QP (boolean)`` > HIERARCHICAL_QP allows the host to specify the quantization parameter > values for each temporal layer through HIERARCHICAL_QP_LAYER. This is > diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c > index bd7f330..abef73e 100644 > --- a/drivers/media/v4l2-core/v4l2-ctrls.c > +++ b/drivers/media/v4l2-core/v4l2-ctrls.c > @@ -920,6 +920,8 @@ const char *v4l2_ctrl_get_name(u32 id) > case V4L2_CID_MPEG_VIDEO_H264_I_FRAME_MAX_QP: return "H264 I-Frame Maximum QP Value"; > case V4L2_CID_MPEG_VIDEO_H264_P_FRAME_MIN_QP: return "H264 P-Frame Minimum QP Value"; > case V4L2_CID_MPEG_VIDEO_H264_P_FRAME_MAX_QP: return "H264 P-Frame Maximum QP Value"; > + case V4L2_CID_MPEG_VIDEO_H264_B_FRAME_MIN_QP: return "H264 B-Frame Minimum QP Value"; > + case V4L2_CID_MPEG_VIDEO_H264_B_FRAME_MAX_QP: return "H264 B-Frame Maximum QP Value"; > case V4L2_CID_MPEG_VIDEO_H264_SPS: return "H264 Sequence Parameter Set"; > case V4L2_CID_MPEG_VIDEO_H264_PPS: return "H264 Picture Parameter Set"; > case V4L2_CID_MPEG_VIDEO_H264_SCALING_MATRIX: return "H264 Scaling Matrix"; > @@ -978,6 +980,12 @@ const char *v4l2_ctrl_get_name(u32 id) > case V4L2_CID_MPEG_VIDEO_HEVC_B_FRAME_QP: return "HEVC B-Frame QP Value"; > case V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP: return "HEVC Minimum QP Value"; > case V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP: return "HEVC Maximum QP Value"; > + case V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_MIN_QP: return "HEVC I-Frame Minimum QP Value"; > + case V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_MAX_QP: return "HEVC I-Frame Maximum QP Value"; > + case V4L2_CID_MPEG_VIDEO_HEVC_P_FRAME_MIN_QP: return "HEVC P-Frame Minimum QP Value"; > + case V4L2_CID_MPEG_VIDEO_HEVC_P_FRAME_MAX_QP: return "HEVC P-Frame Maximum QP Value"; > + case V4L2_CID_MPEG_VIDEO_HEVC_B_FRAME_MIN_QP: return "HEVC B-Frame Minimum QP Value"; > + case V4L2_CID_MPEG_VIDEO_HEVC_B_FRAME_MAX_QP: return "HEVC B-Frame Maximum QP Value"; > case V4L2_CID_MPEG_VIDEO_HEVC_PROFILE: return "HEVC Profile"; > case V4L2_CID_MPEG_VIDEO_HEVC_LEVEL: return "HEVC Level"; > case V4L2_CID_MPEG_VIDEO_HEVC_TIER: return "HEVC Tier"; > diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h > index a184c49..7ba05fe 100644 > --- a/include/uapi/linux/v4l2-controls.h > +++ b/include/uapi/linux/v4l2-controls.h > @@ -578,6 +578,8 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type { > #define V4L2_CID_MPEG_VIDEO_H264_I_FRAME_MAX_QP (V4L2_CID_MPEG_BASE+386) > #define V4L2_CID_MPEG_VIDEO_H264_P_FRAME_MIN_QP (V4L2_CID_MPEG_BASE+387) > #define V4L2_CID_MPEG_VIDEO_H264_P_FRAME_MAX_QP (V4L2_CID_MPEG_BASE+388) > +#define V4L2_CID_MPEG_VIDEO_H264_B_FRAME_MIN_QP (V4L2_CID_MPEG_BASE+389) > +#define V4L2_CID_MPEG_VIDEO_H264_B_FRAME_MAX_QP (V4L2_CID_MPEG_BASE+390) > #define V4L2_CID_MPEG_VIDEO_MPEG4_I_FRAME_QP (V4L2_CID_MPEG_BASE+400) > #define V4L2_CID_MPEG_VIDEO_MPEG4_P_FRAME_QP (V4L2_CID_MPEG_BASE+401) > #define V4L2_CID_MPEG_VIDEO_MPEG4_B_FRAME_QP (V4L2_CID_MPEG_BASE+402) > @@ -762,6 +764,13 @@ enum v4l2_cid_mpeg_video_hevc_size_of_length_field { > #define V4L2_CID_MPEG_VIDEO_PREPEND_SPSPPS_TO_IDR (V4L2_CID_MPEG_BASE + 644) > #define V4L2_CID_MPEG_VIDEO_CONSTANT_QUALITY (V4L2_CID_MPEG_BASE + 645) > #define V4L2_CID_MPEG_VIDEO_FRAME_SKIP_MODE (V4L2_CID_MPEG_BASE + 646) > +#define V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_MIN_QP (V4L2_CID_MPEG_BASE+647) > +#define V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_MAX_QP (V4L2_CID_MPEG_BASE+648) > +#define V4L2_CID_MPEG_VIDEO_HEVC_P_FRAME_MIN_QP (V4L2_CID_MPEG_BASE+649) > +#define V4L2_CID_MPEG_VIDEO_HEVC_P_FRAME_MAX_QP (V4L2_CID_MPEG_BASE+650) > +#define V4L2_CID_MPEG_VIDEO_HEVC_B_FRAME_MIN_QP (V4L2_CID_MPEG_BASE+651) > +#define V4L2_CID_MPEG_VIDEO_HEVC_B_FRAME_MAX_QP (V4L2_CID_MPEG_BASE+652) > + > enum v4l2_mpeg_video_frame_skip_mode { > V4L2_MPEG_VIDEO_FRAME_SKIP_MODE_DISABLED = 0, > V4L2_MPEG_VIDEO_FRAME_SKIP_MODE_LEVEL_LIMIT = 1, > Regards, Hans
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst index ce728c75..26f8220 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst @@ -1182,6 +1182,18 @@ enum v4l2_mpeg_video_h264_entropy_mode - V4L2_CID_MPEG_VIDEO_H264_MAX_QP is also set, the quantization parameter should be chosen to meet both requirements. +``V4L2_CID_MPEG_VIDEO_H264_B_FRAME_MIN_QP (integer)`` + Minimum quantization parameter for the H264 B frame to limit B frame + quality to a range. Valid range: from 0 to 51. If + V4L2_CID_MPEG_VIDEO_H264_MIN_QP is also set, the quantization parameter + should be chosen to meet both requirements. + +``V4L2_CID_MPEG_VIDEO_H264_B_FRAME_MAX_QP (integer)`` + Maximum quantization parameter for the H264 B frame to limit B frame + quality to a range. Valid range: from 0 to 51. If + V4L2_CID_MPEG_VIDEO_H264_MAX_QP is also set, the quantization parameter + should be chosen to meet both requirements. + ``V4L2_CID_MPEG_VIDEO_MPEG4_I_FRAME_QP (integer)`` Quantization parameter for an I frame for MPEG4. Valid range: from 1 to 31. @@ -3441,11 +3453,13 @@ HEVC/H.265 Control IDs ``V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP (integer)`` Minimum quantization parameter for HEVC. - Valid range: from 0 to 51. + Valid range: from 0 - 51 for 8 bit and + 0 - 63 for 10 bit. ``V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP (integer)`` Maximum quantization parameter for HEVC. - Valid range: from 0 to 51. + Valid range: from 0 - 51 for 8 bit and + 0 - 63 for 10 bit ``V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_QP (integer)`` Quantization parameter for an I frame for HEVC. @@ -3462,6 +3476,42 @@ HEVC/H.265 Control IDs Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP, V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP]. +``V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_MIN_QP (integer)`` + Minimum quantization parameter for the HEVC I frame to limit I frame + quality to a range. Valid range: from 0 to 51 for 8 bit, 0 - 63 for 10 bit. + If V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP is also set, the quantization parameter + should be chosen to meet both requirements. + +``V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_MAX_QP (integer)`` + Maximum quantization parameter for the HEVC I frame to limit I frame + quality to a range. Valid range: from 0 to 51 for 8 bit, 0 - 63 for 10 bit. + If V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP is also set, the quantization parameter + should be chosen to meet both requirements. + +``V4L2_CID_MPEG_VIDEO_HEVC_P_FRAME_MIN_QP (integer)`` + Minimum quantization parameter for the HEVC P frame to limit P frame + quality to a range. Valid range: from 0 to 51 for 8 bit, 0 - 63 for 10 bit. + If V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP is also set, the quantization parameter + should be chosen to meet both requirements. + +``V4L2_CID_MPEG_VIDEO_HEVC_P_FRAME_MAX_QP (integer)`` + Maximum quantization parameter for the HEVC P frame to limit P frame + quality to a range. Valid range: from 0 to 51 for 8 bit, 0 - 63 for 10 bit. + If V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP is also set, the quantization parameter + should be chosen to meet both requirements. + +``V4L2_CID_MPEG_VIDEO_HEVC_B_FRAME_MIN_QP (integer)`` + Minimum quantization parameter for the HEVC B frame to limit B frame + quality to a range. Valid range: from 0 to 51 for 8 bit, 0 - 63 for 10 bit. + If V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP is also set, the quantization parameter + should be chosen to meet both requirements. + +``V4L2_CID_MPEG_VIDEO_HEVC_B_FRAME_MAX_QP (integer)`` + Maximum quantization parameter for the HEVC B frame to limit B frame + quality to a range. Valid range: from 0 to 51 for 8 bit, 0 - 63 for 10 bit. + If V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP is also set, the quantization parameter + should be chosen to meet both requirements. + ``V4L2_CID_MPEG_VIDEO_HEVC_HIER_QP (boolean)`` HIERARCHICAL_QP allows the host to specify the quantization parameter values for each temporal layer through HIERARCHICAL_QP_LAYER. This is diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c index bd7f330..abef73e 100644 --- a/drivers/media/v4l2-core/v4l2-ctrls.c +++ b/drivers/media/v4l2-core/v4l2-ctrls.c @@ -920,6 +920,8 @@ const char *v4l2_ctrl_get_name(u32 id) case V4L2_CID_MPEG_VIDEO_H264_I_FRAME_MAX_QP: return "H264 I-Frame Maximum QP Value"; case V4L2_CID_MPEG_VIDEO_H264_P_FRAME_MIN_QP: return "H264 P-Frame Minimum QP Value"; case V4L2_CID_MPEG_VIDEO_H264_P_FRAME_MAX_QP: return "H264 P-Frame Maximum QP Value"; + case V4L2_CID_MPEG_VIDEO_H264_B_FRAME_MIN_QP: return "H264 B-Frame Minimum QP Value"; + case V4L2_CID_MPEG_VIDEO_H264_B_FRAME_MAX_QP: return "H264 B-Frame Maximum QP Value"; case V4L2_CID_MPEG_VIDEO_H264_SPS: return "H264 Sequence Parameter Set"; case V4L2_CID_MPEG_VIDEO_H264_PPS: return "H264 Picture Parameter Set"; case V4L2_CID_MPEG_VIDEO_H264_SCALING_MATRIX: return "H264 Scaling Matrix"; @@ -978,6 +980,12 @@ const char *v4l2_ctrl_get_name(u32 id) case V4L2_CID_MPEG_VIDEO_HEVC_B_FRAME_QP: return "HEVC B-Frame QP Value"; case V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP: return "HEVC Minimum QP Value"; case V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP: return "HEVC Maximum QP Value"; + case V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_MIN_QP: return "HEVC I-Frame Minimum QP Value"; + case V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_MAX_QP: return "HEVC I-Frame Maximum QP Value"; + case V4L2_CID_MPEG_VIDEO_HEVC_P_FRAME_MIN_QP: return "HEVC P-Frame Minimum QP Value"; + case V4L2_CID_MPEG_VIDEO_HEVC_P_FRAME_MAX_QP: return "HEVC P-Frame Maximum QP Value"; + case V4L2_CID_MPEG_VIDEO_HEVC_B_FRAME_MIN_QP: return "HEVC B-Frame Minimum QP Value"; + case V4L2_CID_MPEG_VIDEO_HEVC_B_FRAME_MAX_QP: return "HEVC B-Frame Maximum QP Value"; case V4L2_CID_MPEG_VIDEO_HEVC_PROFILE: return "HEVC Profile"; case V4L2_CID_MPEG_VIDEO_HEVC_LEVEL: return "HEVC Level"; case V4L2_CID_MPEG_VIDEO_HEVC_TIER: return "HEVC Tier"; diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h index a184c49..7ba05fe 100644 --- a/include/uapi/linux/v4l2-controls.h +++ b/include/uapi/linux/v4l2-controls.h @@ -578,6 +578,8 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type { #define V4L2_CID_MPEG_VIDEO_H264_I_FRAME_MAX_QP (V4L2_CID_MPEG_BASE+386) #define V4L2_CID_MPEG_VIDEO_H264_P_FRAME_MIN_QP (V4L2_CID_MPEG_BASE+387) #define V4L2_CID_MPEG_VIDEO_H264_P_FRAME_MAX_QP (V4L2_CID_MPEG_BASE+388) +#define V4L2_CID_MPEG_VIDEO_H264_B_FRAME_MIN_QP (V4L2_CID_MPEG_BASE+389) +#define V4L2_CID_MPEG_VIDEO_H264_B_FRAME_MAX_QP (V4L2_CID_MPEG_BASE+390) #define V4L2_CID_MPEG_VIDEO_MPEG4_I_FRAME_QP (V4L2_CID_MPEG_BASE+400) #define V4L2_CID_MPEG_VIDEO_MPEG4_P_FRAME_QP (V4L2_CID_MPEG_BASE+401) #define V4L2_CID_MPEG_VIDEO_MPEG4_B_FRAME_QP (V4L2_CID_MPEG_BASE+402) @@ -762,6 +764,13 @@ enum v4l2_cid_mpeg_video_hevc_size_of_length_field { #define V4L2_CID_MPEG_VIDEO_PREPEND_SPSPPS_TO_IDR (V4L2_CID_MPEG_BASE + 644) #define V4L2_CID_MPEG_VIDEO_CONSTANT_QUALITY (V4L2_CID_MPEG_BASE + 645) #define V4L2_CID_MPEG_VIDEO_FRAME_SKIP_MODE (V4L2_CID_MPEG_BASE + 646) +#define V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_MIN_QP (V4L2_CID_MPEG_BASE+647) +#define V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_MAX_QP (V4L2_CID_MPEG_BASE+648) +#define V4L2_CID_MPEG_VIDEO_HEVC_P_FRAME_MIN_QP (V4L2_CID_MPEG_BASE+649) +#define V4L2_CID_MPEG_VIDEO_HEVC_P_FRAME_MAX_QP (V4L2_CID_MPEG_BASE+650) +#define V4L2_CID_MPEG_VIDEO_HEVC_B_FRAME_MIN_QP (V4L2_CID_MPEG_BASE+651) +#define V4L2_CID_MPEG_VIDEO_HEVC_B_FRAME_MAX_QP (V4L2_CID_MPEG_BASE+652) + enum v4l2_mpeg_video_frame_skip_mode { V4L2_MPEG_VIDEO_FRAME_SKIP_MODE_DISABLED = 0, V4L2_MPEG_VIDEO_FRAME_SKIP_MODE_LEVEL_LIMIT = 1,
- Adds min/max qp controls for B frame for h264. - Adds min/max qp controls for I/P/B frames for hevc similar to h264. - Update valid range of mim/max qp for hevc to accommodate 10 bit. Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org> --- .../userspace-api/media/v4l/ext-ctrls-codec.rst | 54 +++++++++++++++++++++- drivers/media/v4l2-core/v4l2-ctrls.c | 8 ++++ include/uapi/linux/v4l2-controls.h | 9 ++++ 3 files changed, 69 insertions(+), 2 deletions(-)