| Message ID | 1602081798-17548-2-git-send-email-hugues.fruchet@st.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | media: ov5640: fix MIPI power sequence | expand |
Hi Hugues, On Wed, Oct 07, 2020 at 04:43:18PM +0200, Hugues Fruchet wrote: > fixes: b1751ae652fb ("media: i2c: ov5640: Separate out mipi configuration from s_power") Fixes: ... And preferrably before Sob line. > > Fix ov5640_write_reg()return value unchecked at power off. > Reformat code to keep register access below the register description. If there's an error, I wouldn't stop turning things off, but just proceed. The caller will ignore the error in that case anyway. This changes with the patch. > > Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> > Change-Id: I12db67c416c3d63eadee400a3c89aaf48c5b1469 This was probably not intended to be here. > --- > drivers/media/i2c/ov5640.c | 17 ++++++----------- > 1 file changed, 6 insertions(+), 11 deletions(-) > > diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c > index 8d0254d..f34e62e 100644 > --- a/drivers/media/i2c/ov5640.c > +++ b/drivers/media/i2c/ov5640.c > @@ -1940,14 +1940,6 @@ static int ov5640_set_power_mipi(struct ov5640_dev *sensor, bool on) > { > int ret; > > - if (!on) { > - /* Reset MIPI bus settings to their default values. */ > - ov5640_write_reg(sensor, OV5640_REG_IO_MIPI_CTRL00, 0x58); > - ov5640_write_reg(sensor, OV5640_REG_MIPI_CTRL00, 0x04); > - ov5640_write_reg(sensor, OV5640_REG_PAD_OUTPUT00, 0x00); > - return 0; > - } > - > /* > * Power up MIPI HS Tx and LS Rx; 2 data lanes mode > * > @@ -1958,7 +1950,8 @@ static int ov5640_set_power_mipi(struct ov5640_dev *sensor, bool on) > * [3] = 0 : Power up MIPI LS Rx > * [2] = 0 : MIPI interface disabled > */ > - ret = ov5640_write_reg(sensor, OV5640_REG_IO_MIPI_CTRL00, 0x40); > + ret = ov5640_write_reg(sensor, OV5640_REG_IO_MIPI_CTRL00, > + on ? 0x40 : 0x58); > if (ret) > return ret; > > @@ -1969,7 +1962,8 @@ static int ov5640_set_power_mipi(struct ov5640_dev *sensor, bool on) > * [5] = 1 : Gate clock when 'no packets' > * [2] = 1 : MIPI bus in LP11 when 'no packets' > */ > - ret = ov5640_write_reg(sensor, OV5640_REG_MIPI_CTRL00, 0x24); > + ret = ov5640_write_reg(sensor, OV5640_REG_MIPI_CTRL00, > + on ? 0x24 : 0x04); > if (ret) > return ret; > > @@ -1981,7 +1975,8 @@ static int ov5640_set_power_mipi(struct ov5640_dev *sensor, bool on) > * [5] = 1 : MIPI data lane 1 in LP11 when 'sleeping' > * [4] = 1 : MIPI clock lane in LP11 when 'sleeping' > */ > - ret = ov5640_write_reg(sensor, OV5640_REG_PAD_OUTPUT00, 0x70); > + ret = ov5640_write_reg(sensor, OV5640_REG_PAD_OUTPUT00, > + on ? 0x70 : 0x00); > if (ret) > return ret; >
Hi Hugues, Sakari, On Wed, Oct 07, 2020 at 06:01:03PM +0300, Sakari Ailus wrote: > Hi Hugues, > > On Wed, Oct 07, 2020 at 04:43:18PM +0200, Hugues Fruchet wrote: > > fixes: b1751ae652fb ("media: i2c: ov5640: Separate out mipi configuration from s_power") > > Fixes: ... > > And preferrably before Sob line. > > > > > Fix ov5640_write_reg()return value unchecked at power off. > > Reformat code to keep register access below the register description. > > If there's an error, I wouldn't stop turning things off, but just proceed. > The caller will ignore the error in that case anyway. This changes with the > patch. Agreed, I think it's best to continue instead of bailing out as we're in a power-off path > > > > > Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> > > Change-Id: I12db67c416c3d63eadee400a3c89aaf48c5b1469 > > This was probably not intended to be here. > > > --- > > drivers/media/i2c/ov5640.c | 17 ++++++----------- > > 1 file changed, 6 insertions(+), 11 deletions(-) > > > > diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c > > index 8d0254d..f34e62e 100644 > > --- a/drivers/media/i2c/ov5640.c > > +++ b/drivers/media/i2c/ov5640.c > > @@ -1940,14 +1940,6 @@ static int ov5640_set_power_mipi(struct ov5640_dev *sensor, bool on) > > { > > int ret; > > > > - if (!on) { > > - /* Reset MIPI bus settings to their default values. */ > > - ov5640_write_reg(sensor, OV5640_REG_IO_MIPI_CTRL00, 0x58); > > - ov5640_write_reg(sensor, OV5640_REG_MIPI_CTRL00, 0x04); > > - ov5640_write_reg(sensor, OV5640_REG_PAD_OUTPUT00, 0x00); > > - return 0; > > - } > > - > > /* > > * Power up MIPI HS Tx and LS Rx; 2 data lanes mode > > * > > @@ -1958,7 +1950,8 @@ static int ov5640_set_power_mipi(struct ov5640_dev *sensor, bool on) > > * [3] = 0 : Power up MIPI LS Rx > > * [2] = 0 : MIPI interface disabled > > */ > > - ret = ov5640_write_reg(sensor, OV5640_REG_IO_MIPI_CTRL00, 0x40); > > + ret = ov5640_write_reg(sensor, OV5640_REG_IO_MIPI_CTRL00, > > + on ? 0x40 : 0x58); > > if (ret) > > return ret; > > > > @@ -1969,7 +1962,8 @@ static int ov5640_set_power_mipi(struct ov5640_dev *sensor, bool on) > > * [5] = 1 : Gate clock when 'no packets' > > * [2] = 1 : MIPI bus in LP11 when 'no packets' > > */ > > - ret = ov5640_write_reg(sensor, OV5640_REG_MIPI_CTRL00, 0x24); > > + ret = ov5640_write_reg(sensor, OV5640_REG_MIPI_CTRL00, > > + on ? 0x24 : 0x04); > > if (ret) > > return ret; > > > > @@ -1981,7 +1975,8 @@ static int ov5640_set_power_mipi(struct ov5640_dev *sensor, bool on) > > * [5] = 1 : MIPI data lane 1 in LP11 when 'sleeping' > > * [4] = 1 : MIPI clock lane in LP11 when 'sleeping' > > */ > > - ret = ov5640_write_reg(sensor, OV5640_REG_PAD_OUTPUT00, 0x70); > > + ret = ov5640_write_reg(sensor, OV5640_REG_PAD_OUTPUT00, > > + on ? 0x70 : 0x00); > > if (ret) > > return ret; > > > > -- > Kind regards, > > Sakari Ailus
Hi Jacopo, Sakari, As you want, let's drop this patch. BR, Hugues. On 10/7/20 5:09 PM, Jacopo Mondi wrote: > Hi Hugues, Sakari, > > On Wed, Oct 07, 2020 at 06:01:03PM +0300, Sakari Ailus wrote: >> Hi Hugues, >> >> On Wed, Oct 07, 2020 at 04:43:18PM +0200, Hugues Fruchet wrote: >>> fixes: b1751ae652fb ("media: i2c: ov5640: Separate out mipi configuration from s_power") >> >> Fixes: ... >> >> And preferrably before Sob line. >> >>> >>> Fix ov5640_write_reg()return value unchecked at power off. >>> Reformat code to keep register access below the register description. >> >> If there's an error, I wouldn't stop turning things off, but just proceed. >> The caller will ignore the error in that case anyway. This changes with the >> patch. > > Agreed, I think it's best to continue instead of bailing out as we're > in a power-off path > >> >>> >>> Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> >>> Change-Id: I12db67c416c3d63eadee400a3c89aaf48c5b1469 >> >> This was probably not intended to be here. >> >>> --- >>> drivers/media/i2c/ov5640.c | 17 ++++++----------- >>> 1 file changed, 6 insertions(+), 11 deletions(-) >>> >>> diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c >>> index 8d0254d..f34e62e 100644 >>> --- a/drivers/media/i2c/ov5640.c >>> +++ b/drivers/media/i2c/ov5640.c >>> @@ -1940,14 +1940,6 @@ static int ov5640_set_power_mipi(struct ov5640_dev *sensor, bool on) >>> { >>> int ret; >>> >>> - if (!on) { >>> - /* Reset MIPI bus settings to their default values. */ >>> - ov5640_write_reg(sensor, OV5640_REG_IO_MIPI_CTRL00, 0x58); >>> - ov5640_write_reg(sensor, OV5640_REG_MIPI_CTRL00, 0x04); >>> - ov5640_write_reg(sensor, OV5640_REG_PAD_OUTPUT00, 0x00); >>> - return 0; >>> - } >>> - >>> /* >>> * Power up MIPI HS Tx and LS Rx; 2 data lanes mode >>> * >>> @@ -1958,7 +1950,8 @@ static int ov5640_set_power_mipi(struct ov5640_dev *sensor, bool on) >>> * [3] = 0 : Power up MIPI LS Rx >>> * [2] = 0 : MIPI interface disabled >>> */ >>> - ret = ov5640_write_reg(sensor, OV5640_REG_IO_MIPI_CTRL00, 0x40); >>> + ret = ov5640_write_reg(sensor, OV5640_REG_IO_MIPI_CTRL00, >>> + on ? 0x40 : 0x58); >>> if (ret) >>> return ret; >>> >>> @@ -1969,7 +1962,8 @@ static int ov5640_set_power_mipi(struct ov5640_dev *sensor, bool on) >>> * [5] = 1 : Gate clock when 'no packets' >>> * [2] = 1 : MIPI bus in LP11 when 'no packets' >>> */ >>> - ret = ov5640_write_reg(sensor, OV5640_REG_MIPI_CTRL00, 0x24); >>> + ret = ov5640_write_reg(sensor, OV5640_REG_MIPI_CTRL00, >>> + on ? 0x24 : 0x04); >>> if (ret) >>> return ret; >>> >>> @@ -1981,7 +1975,8 @@ static int ov5640_set_power_mipi(struct ov5640_dev *sensor, bool on) >>> * [5] = 1 : MIPI data lane 1 in LP11 when 'sleeping' >>> * [4] = 1 : MIPI clock lane in LP11 when 'sleeping' >>> */ >>> - ret = ov5640_write_reg(sensor, OV5640_REG_PAD_OUTPUT00, 0x70); >>> + ret = ov5640_write_reg(sensor, OV5640_REG_PAD_OUTPUT00, >>> + on ? 0x70 : 0x00); >>> if (ret) >>> return ret; >>> >> >> -- >> Kind regards, >> >> Sakari Ailus
diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c index 8d0254d..f34e62e 100644 --- a/drivers/media/i2c/ov5640.c +++ b/drivers/media/i2c/ov5640.c @@ -1940,14 +1940,6 @@ static int ov5640_set_power_mipi(struct ov5640_dev *sensor, bool on) { int ret; - if (!on) { - /* Reset MIPI bus settings to their default values. */ - ov5640_write_reg(sensor, OV5640_REG_IO_MIPI_CTRL00, 0x58); - ov5640_write_reg(sensor, OV5640_REG_MIPI_CTRL00, 0x04); - ov5640_write_reg(sensor, OV5640_REG_PAD_OUTPUT00, 0x00); - return 0; - } - /* * Power up MIPI HS Tx and LS Rx; 2 data lanes mode * @@ -1958,7 +1950,8 @@ static int ov5640_set_power_mipi(struct ov5640_dev *sensor, bool on) * [3] = 0 : Power up MIPI LS Rx * [2] = 0 : MIPI interface disabled */ - ret = ov5640_write_reg(sensor, OV5640_REG_IO_MIPI_CTRL00, 0x40); + ret = ov5640_write_reg(sensor, OV5640_REG_IO_MIPI_CTRL00, + on ? 0x40 : 0x58); if (ret) return ret; @@ -1969,7 +1962,8 @@ static int ov5640_set_power_mipi(struct ov5640_dev *sensor, bool on) * [5] = 1 : Gate clock when 'no packets' * [2] = 1 : MIPI bus in LP11 when 'no packets' */ - ret = ov5640_write_reg(sensor, OV5640_REG_MIPI_CTRL00, 0x24); + ret = ov5640_write_reg(sensor, OV5640_REG_MIPI_CTRL00, + on ? 0x24 : 0x04); if (ret) return ret; @@ -1981,7 +1975,8 @@ static int ov5640_set_power_mipi(struct ov5640_dev *sensor, bool on) * [5] = 1 : MIPI data lane 1 in LP11 when 'sleeping' * [4] = 1 : MIPI clock lane in LP11 when 'sleeping' */ - ret = ov5640_write_reg(sensor, OV5640_REG_PAD_OUTPUT00, 0x70); + ret = ov5640_write_reg(sensor, OV5640_REG_PAD_OUTPUT00, + on ? 0x70 : 0x00); if (ret) return ret;
fixes: b1751ae652fb ("media: i2c: ov5640: Separate out mipi configuration from s_power") Fix ov5640_write_reg()return value unchecked at power off. Reformat code to keep register access below the register description. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Change-Id: I12db67c416c3d63eadee400a3c89aaf48c5b1469 --- drivers/media/i2c/ov5640.c | 17 ++++++----------- 1 file changed, 6 insertions(+), 11 deletions(-)