| Message ID | 1680589032-26046-4-git-send-email-quic_dikshita@quicinc.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | fix decoder issues with firmware version check | expand |
On 4.04.2023 08:17, Dikshita Agarwal wrote: > Use firmware version based check to assign correct > device address for EOS buffer to fix the EOS handling > with different firmware version. > > Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> > Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com> > Signed-off-by: Viswanath Boma <quic_vboma@quicinc.com> > Tested-by: Nathan Hebert <nhebert@chromium.org> > --- Does it only concern fw 1.0.xx? Konrad > drivers/media/platform/qcom/venus/vdec.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/media/platform/qcom/venus/vdec.c b/drivers/media/platform/qcom/venus/vdec.c > index f0394b9..c59b34f 100644 > --- a/drivers/media/platform/qcom/venus/vdec.c > +++ b/drivers/media/platform/qcom/venus/vdec.c > @@ -545,7 +545,7 @@ vdec_decoder_cmd(struct file *file, void *fh, struct v4l2_decoder_cmd *cmd) > > fdata.buffer_type = HFI_BUFFER_INPUT; > fdata.flags |= HFI_BUFFERFLAG_EOS; > - if (IS_V6(inst->core)) > + if (IS_V6(inst->core) && is_fw_rev_or_older(inst->core, 1, 0, 87)) > fdata.device_addr = 0; > else > fdata.device_addr = 0xdeadb000;
On 4/4/2023 11:54 PM, Konrad Dybcio wrote: > > On 4.04.2023 08:17, Dikshita Agarwal wrote: >> Use firmware version based check to assign correct >> device address for EOS buffer to fix the EOS handling >> with different firmware version. >> >> Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> >> Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com> >> Signed-off-by: Viswanath Boma <quic_vboma@quicinc.com> >> Tested-by: Nathan Hebert <nhebert@chromium.org> >> --- > Does it only concern fw 1.0.xx? > > Konrad that's right. changes were made in later firmware (newer than 1.0.87) to make the behavior generic across all supported SOCs. Thanks, Dikshita >> drivers/media/platform/qcom/venus/vdec.c | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/drivers/media/platform/qcom/venus/vdec.c b/drivers/media/platform/qcom/venus/vdec.c >> index f0394b9..c59b34f 100644 >> --- a/drivers/media/platform/qcom/venus/vdec.c >> +++ b/drivers/media/platform/qcom/venus/vdec.c >> @@ -545,7 +545,7 @@ vdec_decoder_cmd(struct file *file, void *fh, struct v4l2_decoder_cmd *cmd) >> >> fdata.buffer_type = HFI_BUFFER_INPUT; >> fdata.flags |= HFI_BUFFERFLAG_EOS; >> - if (IS_V6(inst->core)) >> + if (IS_V6(inst->core) && is_fw_rev_or_older(inst->core, 1, 0, 87)) >> fdata.device_addr = 0; >> else >> fdata.device_addr = 0xdeadb000;
On 5.04.2023 08:41, Dikshita Agarwal wrote: > > On 4/4/2023 11:54 PM, Konrad Dybcio wrote: >> >> On 4.04.2023 08:17, Dikshita Agarwal wrote: >>> Use firmware version based check to assign correct >>> device address for EOS buffer to fix the EOS handling >>> with different firmware version. >>> >>> Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> >>> Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com> >>> Signed-off-by: Viswanath Boma <quic_vboma@quicinc.com> >>> Tested-by: Nathan Hebert <nhebert@chromium.org> >>> --- >> Does it only concern fw 1.0.xx? >> >> Konrad > > that's right. > > changes were made in later firmware (newer than 1.0.87) to > > make the behavior generic across all supported SOCs. > > Thanks, OK Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad > > Dikshita > >>> drivers/media/platform/qcom/venus/vdec.c | 2 +- >>> 1 file changed, 1 insertion(+), 1 deletion(-) >>> >>> diff --git a/drivers/media/platform/qcom/venus/vdec.c b/drivers/media/platform/qcom/venus/vdec.c >>> index f0394b9..c59b34f 100644 >>> --- a/drivers/media/platform/qcom/venus/vdec.c >>> +++ b/drivers/media/platform/qcom/venus/vdec.c >>> @@ -545,7 +545,7 @@ vdec_decoder_cmd(struct file *file, void *fh, struct v4l2_decoder_cmd *cmd) >>> fdata.buffer_type = HFI_BUFFER_INPUT; >>> fdata.flags |= HFI_BUFFERFLAG_EOS; >>> - if (IS_V6(inst->core)) >>> + if (IS_V6(inst->core) && is_fw_rev_or_older(inst->core, 1, 0, 87)) >>> fdata.device_addr = 0; >>> else >>> fdata.device_addr = 0xdeadb000;
diff --git a/drivers/media/platform/qcom/venus/vdec.c b/drivers/media/platform/qcom/venus/vdec.c index f0394b9..c59b34f 100644 --- a/drivers/media/platform/qcom/venus/vdec.c +++ b/drivers/media/platform/qcom/venus/vdec.c @@ -545,7 +545,7 @@ vdec_decoder_cmd(struct file *file, void *fh, struct v4l2_decoder_cmd *cmd) fdata.buffer_type = HFI_BUFFER_INPUT; fdata.flags |= HFI_BUFFERFLAG_EOS; - if (IS_V6(inst->core)) + if (IS_V6(inst->core) && is_fw_rev_or_older(inst->core, 1, 0, 87)) fdata.device_addr = 0; else fdata.device_addr = 0xdeadb000;