| Message ID | 20090205182320.GA29992@www.tglx.de (mailing list archive) |
|---|---|
| State | RFC |
| Headers | show |
Thanks, Vaibhav Hiremath > -----Original Message----- > From: Sebastian Andrzej Siewior [mailto:bigeasy@linutronix.de] > Sent: Thursday, February 05, 2009 11:53 PM > To: Hiremath, Vaibhav > Cc: linux-media@vger.kernel.org; mchehab@redhat.com; video4linux- > list@redhat.com > Subject: [PATCH v3] v4l/tvp514x: make the module aware of rich > people > > because they might design two of those chips on a single board. > You never know. > > Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> > --- > Sorry for the delay. While I was preparing v2 I lost the > tvp514x_slave > chunk. Now I see a can see a picture error when I plug two codecs > simultaneity but this could be also a bug in my cam driver. > > v3: - addressed review comments > - move tvp514x_slave into decoder struct it is used per device > while > registering / comparing > v2: Make the content of the registers (brightness, \ldots) per > decoder > and not global. > v1: Initial version > > drivers/media/video/tvp514x.c | 104 +++++++++++++++++++++++------- > ----------- > 1 files changed, 58 insertions(+), 46 deletions(-) > > diff --git a/drivers/media/video/tvp514x.c > b/drivers/media/video/tvp514x.c > index 8e23aa5..2167284 100644 > --- a/drivers/media/video/tvp514x.c > +++ b/drivers/media/video/tvp514x.c > @@ -86,9 +86,12 @@ struct tvp514x_std_info { > struct v4l2_standard standard; > }; > > +static struct tvp514x_reg tvp514x_reg_list_default[0x40]; > /** > - * struct tvp514x_decoded - TVP5146/47 decoder object > + * struct tvp514x_decoder - TVP5146/47 decoder object > * @v4l2_int_device: Slave handle > + * @tvp514x_slave: Slave pointer which is used by @v4l2_int_device > + * @tvp514x_regs: copy of hw's regs with preset values. > * @pdata: Board specific > * @client: I2C client data > * @id: Entry from I2C table > @@ -103,7 +106,9 @@ struct tvp514x_std_info { > * @route: input and output routing at chip level > */ > struct tvp514x_decoder { > - struct v4l2_int_device *v4l2_int_device; > + struct v4l2_int_device v4l2_int_device; > + struct v4l2_int_slave tvp514x_slave; > + struct tvp514x_reg > tvp514x_regs[ARRAY_SIZE(tvp514x_reg_list_default)]; > const struct tvp514x_platform_data *pdata; > struct i2c_client *client; > > @@ -124,7 +129,7 @@ struct tvp514x_decoder { > }; > > /* TVP514x default register values */ > -static struct tvp514x_reg tvp514x_reg_list[] = { > +static struct tvp514x_reg tvp514x_reg_list_default[] = { > {TOK_WRITE, REG_INPUT_SEL, 0x05}, /* Composite selected */ > {TOK_WRITE, REG_AFE_GAIN_CTRL, 0x0F}, > {TOK_WRITE, REG_VIDEO_STD, 0x00}, /* Auto mode */ > @@ -422,7 +427,7 @@ static int tvp514x_configure(struct > tvp514x_decoder *decoder) > > /* common register initialization */ > err = > - tvp514x_write_regs(decoder->client, tvp514x_reg_list); > + tvp514x_write_regs(decoder->client, decoder- > >tvp514x_regs); > if (err) > return err; > > @@ -580,7 +585,7 @@ static int ioctl_s_std(struct v4l2_int_device > *s, v4l2_std_id *std_id) > return err; > > decoder->current_std = i; > - tvp514x_reg_list[REG_VIDEO_STD].val = decoder- > >std_list[i].video_std; > + decoder->tvp514x_regs[REG_VIDEO_STD].val = decoder- > >std_list[i].video_std; [Hiremath, Vaibhav] I am getting an checkpatch warning here, the line is exceeding 80 columns. Since this is not some complex line which will be having problems in readability, I would prefer to fix this. > > v4l_dbg(1, debug, decoder->client, "Standard set to: %s", > decoder->std_list[i].standard.name); > @@ -625,8 +630,8 @@ static int ioctl_s_routing(struct > v4l2_int_device *s, > if (err) > return err; > > - tvp514x_reg_list[REG_INPUT_SEL].val = input_sel; > - tvp514x_reg_list[REG_OUTPUT_FORMATTER1].val = output_sel; > + decoder->tvp514x_regs[REG_INPUT_SEL].val = input_sel; > + decoder->tvp514x_regs[REG_OUTPUT_FORMATTER1].val = output_sel; > > /* Clear status */ > msleep(LOCK_RETRY_DELAY); > @@ -779,16 +784,16 @@ ioctl_g_ctrl(struct v4l2_int_device *s, struct > v4l2_control *ctrl) > > switch (ctrl->id) { > case V4L2_CID_BRIGHTNESS: > - ctrl->value = tvp514x_reg_list[REG_BRIGHTNESS].val; > + ctrl->value = decoder->tvp514x_regs[REG_BRIGHTNESS].val; > break; > case V4L2_CID_CONTRAST: > - ctrl->value = tvp514x_reg_list[REG_CONTRAST].val; > + ctrl->value = decoder->tvp514x_regs[REG_CONTRAST].val; > break; > case V4L2_CID_SATURATION: > - ctrl->value = tvp514x_reg_list[REG_SATURATION].val; > + ctrl->value = decoder->tvp514x_regs[REG_SATURATION].val; > break; > case V4L2_CID_HUE: > - ctrl->value = tvp514x_reg_list[REG_HUE].val; > + ctrl->value = decoder->tvp514x_regs[REG_HUE].val; > if (ctrl->value == 0x7F) > ctrl->value = 180; > else if (ctrl->value == 0x80) > @@ -798,7 +803,7 @@ ioctl_g_ctrl(struct v4l2_int_device *s, struct > v4l2_control *ctrl) > > break; > case V4L2_CID_AUTOGAIN: > - ctrl->value = tvp514x_reg_list[REG_AFE_GAIN_CTRL].val; > + ctrl->value = decoder- > >tvp514x_regs[REG_AFE_GAIN_CTRL].val; > if ((ctrl->value & 0x3) == 3) > ctrl->value = 1; > else > @@ -848,7 +853,7 @@ ioctl_s_ctrl(struct v4l2_int_device *s, struct > v4l2_control *ctrl) > value); > if (err) > return err; > - tvp514x_reg_list[REG_BRIGHTNESS].val = value; > + decoder->tvp514x_regs[REG_BRIGHTNESS].val = value; > break; > case V4L2_CID_CONTRAST: > if (ctrl->value < 0 || ctrl->value > 255) { > @@ -861,7 +866,7 @@ ioctl_s_ctrl(struct v4l2_int_device *s, struct > v4l2_control *ctrl) > value); > if (err) > return err; > - tvp514x_reg_list[REG_CONTRAST].val = value; > + decoder->tvp514x_regs[REG_CONTRAST].val = value; > break; > case V4L2_CID_SATURATION: > if (ctrl->value < 0 || ctrl->value > 255) { > @@ -874,7 +879,7 @@ ioctl_s_ctrl(struct v4l2_int_device *s, struct > v4l2_control *ctrl) > value); > if (err) > return err; > - tvp514x_reg_list[REG_SATURATION].val = value; > + decoder->tvp514x_regs[REG_SATURATION].val = value; > break; > case V4L2_CID_HUE: > if (value == 180) > @@ -893,7 +898,7 @@ ioctl_s_ctrl(struct v4l2_int_device *s, struct > v4l2_control *ctrl) > value); > if (err) > return err; > - tvp514x_reg_list[REG_HUE].val = value; > + decoder->tvp514x_regs[REG_HUE].val = value; > break; > case V4L2_CID_AUTOGAIN: > if (value == 1) > @@ -910,7 +915,7 @@ ioctl_s_ctrl(struct v4l2_int_device *s, struct > v4l2_control *ctrl) > value); > if (err) > return err; > - tvp514x_reg_list[REG_AFE_GAIN_CTRL].val = value; > + decoder->tvp514x_regs[REG_AFE_GAIN_CTRL].val = value; > break; > default: > v4l_err(decoder->client, > @@ -1275,7 +1280,7 @@ static int ioctl_init(struct v4l2_int_device > *s) > struct tvp514x_decoder *decoder = s->priv; > > /* Set default standard to auto */ > - tvp514x_reg_list[REG_VIDEO_STD].val = > + decoder->tvp514x_regs[REG_VIDEO_STD].val = > VIDEO_STD_AUTO_SWITCH_BIT; > > return tvp514x_configure(decoder); > @@ -1344,11 +1349,6 @@ static struct v4l2_int_ioctl_desc > tvp514x_ioctl_desc[] = { > (v4l2_int_ioctl_func *) ioctl_s_routing}, > }; > > -static struct v4l2_int_slave tvp514x_slave = { > - .ioctls = tvp514x_ioctl_desc, > - .num_ioctls = ARRAY_SIZE(tvp514x_ioctl_desc), > -}; > - > static struct tvp514x_decoder tvp514x_dev = { > .state = STATE_NOT_DETECTED, > > @@ -1369,17 +1369,15 @@ static struct tvp514x_decoder tvp514x_dev = > { > .current_std = STD_NTSC_MJ, > .std_list = tvp514x_std_list, > .num_stds = ARRAY_SIZE(tvp514x_std_list), > - > -}; > - > -static struct v4l2_int_device tvp514x_int_device = { > - .module = THIS_MODULE, > - .name = TVP514X_MODULE_NAME, > - .priv = &tvp514x_dev, > - .type = v4l2_int_type_slave, > - .u = { > - .slave = &tvp514x_slave, > - }, > + .v4l2_int_device = { > + .module = THIS_MODULE, > + .name = TVP514X_MODULE_NAME, > + .type = v4l2_int_type_slave, > + }, > + .tvp514x_slave = { > + .ioctls = tvp514x_ioctl_desc, > + .num_ioctls = ARRAY_SIZE(tvp514x_ioctl_desc), > + }, > }; > > /** > @@ -1392,26 +1390,37 @@ static struct v4l2_int_device > tvp514x_int_device = { > static int > tvp514x_probe(struct i2c_client *client, const struct i2c_device_id > *id) > { > - struct tvp514x_decoder *decoder = &tvp514x_dev; > + struct tvp514x_decoder *decoder; > int err; > > /* Check if the adapter supports the needed features */ > if (!i2c_check_functionality(client->adapter, > I2C_FUNC_SMBUS_BYTE_DATA)) > return -EIO; > > - decoder->pdata = client->dev.platform_data; > - if (!decoder->pdata) { > + decoder = kzalloc(sizeof(*decoder), GFP_KERNEL); > + if (!decoder) > + return -ENOMEM; > + > + if (!client->dev.platform_data) { > v4l_err(client, "No platform data!!\n"); > - return -ENODEV; > + err = -ENODEV; > + goto out_free; > } > + > + *decoder = tvp514x_dev; > + decoder->v4l2_int_device.priv = decoder; > + decoder->pdata = client->dev.platform_data; > + decoder->v4l2_int_device.u.slave = &decoder->tvp514x_slave; > + memcpy(decoder->tvp514x_regs, tvp514x_reg_list_default, > + sizeof(tvp514x_reg_list_default)); > /* > * Fetch platform specific data, and configure the > * tvp514x_reg_list[] accordingly. Since this is one > * time configuration, no need to preserve. > */ > - tvp514x_reg_list[REG_OUTPUT_FORMATTER2].val |= > + decoder->tvp514x_regs[REG_OUTPUT_FORMATTER2].val |= > (decoder->pdata->clk_polarity << 1); > - tvp514x_reg_list[REG_SYNC_CONTROL].val |= > + decoder->tvp514x_regs[REG_SYNC_CONTROL].val |= > ((decoder->pdata->hs_polarity << 2) | > (decoder->pdata->vs_polarity << 3)); > /* > @@ -1419,23 +1428,26 @@ tvp514x_probe(struct i2c_client *client, > const struct i2c_device_id *id) > */ > decoder->id = (struct i2c_device_id *)id; > /* Attach to Master */ > - strcpy(tvp514x_int_device.u.slave->attach_to, decoder->pdata- > >master); > - decoder->v4l2_int_device = &tvp514x_int_device; > + strcpy(decoder->v4l2_int_device.u.slave->attach_to, decoder- > >pdata->master); [Hiremath, Vaibhav] Same applies here. > decoder->client = client; > i2c_set_clientdata(client, decoder); > > /* Register with V4L2 layer as slave device */ > - err = v4l2_int_device_register(decoder->v4l2_int_device); > + err = v4l2_int_device_register(&decoder->v4l2_int_device); > if (err) { > i2c_set_clientdata(client, NULL); > v4l_err(client, > "Unable to register to v4l2. Err[%d]\n", err); > + goto out_free; > > } else > v4l_info(client, "Registered to v4l2 master %s!!\n", > decoder->pdata->master); > - > return 0; > + > +out_free: > + kfree(decoder); > + return err; > } > > /** > @@ -1452,9 +1464,9 @@ static int __exit tvp514x_remove(struct > i2c_client *client) > if (!client->adapter) > return -ENODEV; /* our client isn't attached */ > > - v4l2_int_device_unregister(decoder->v4l2_int_device); > + v4l2_int_device_unregister(&decoder->v4l2_int_device); > i2c_set_clientdata(client, NULL); > - > + kfree(decoder); > return 0; > } > /* > -- > 1.5.6.5 > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/media/video/tvp514x.c b/drivers/media/video/tvp514x.c index 8e23aa5..2167284 100644 --- a/drivers/media/video/tvp514x.c +++ b/drivers/media/video/tvp514x.c @@ -86,9 +86,12 @@ struct tvp514x_std_info { struct v4l2_standard standard; }; +static struct tvp514x_reg tvp514x_reg_list_default[0x40]; /** - * struct tvp514x_decoded - TVP5146/47 decoder object + * struct tvp514x_decoder - TVP5146/47 decoder object * @v4l2_int_device: Slave handle + * @tvp514x_slave: Slave pointer which is used by @v4l2_int_device + * @tvp514x_regs: copy of hw's regs with preset values. * @pdata: Board specific * @client: I2C client data * @id: Entry from I2C table @@ -103,7 +106,9 @@ struct tvp514x_std_info { * @route: input and output routing at chip level */ struct tvp514x_decoder { - struct v4l2_int_device *v4l2_int_device; + struct v4l2_int_device v4l2_int_device; + struct v4l2_int_slave tvp514x_slave; + struct tvp514x_reg tvp514x_regs[ARRAY_SIZE(tvp514x_reg_list_default)]; const struct tvp514x_platform_data *pdata; struct i2c_client *client; @@ -124,7 +129,7 @@ struct tvp514x_decoder { }; /* TVP514x default register values */ -static struct tvp514x_reg tvp514x_reg_list[] = { +static struct tvp514x_reg tvp514x_reg_list_default[] = { {TOK_WRITE, REG_INPUT_SEL, 0x05}, /* Composite selected */ {TOK_WRITE, REG_AFE_GAIN_CTRL, 0x0F}, {TOK_WRITE, REG_VIDEO_STD, 0x00}, /* Auto mode */ @@ -422,7 +427,7 @@ static int tvp514x_configure(struct tvp514x_decoder *decoder) /* common register initialization */ err = - tvp514x_write_regs(decoder->client, tvp514x_reg_list); + tvp514x_write_regs(decoder->client, decoder->tvp514x_regs); if (err) return err; @@ -580,7 +585,7 @@ static int ioctl_s_std(struct v4l2_int_device *s, v4l2_std_id *std_id) return err; decoder->current_std = i; - tvp514x_reg_list[REG_VIDEO_STD].val = decoder->std_list[i].video_std; + decoder->tvp514x_regs[REG_VIDEO_STD].val = decoder->std_list[i].video_std; v4l_dbg(1, debug, decoder->client, "Standard set to: %s", decoder->std_list[i].standard.name); @@ -625,8 +630,8 @@ static int ioctl_s_routing(struct v4l2_int_device *s, if (err) return err; - tvp514x_reg_list[REG_INPUT_SEL].val = input_sel; - tvp514x_reg_list[REG_OUTPUT_FORMATTER1].val = output_sel; + decoder->tvp514x_regs[REG_INPUT_SEL].val = input_sel; + decoder->tvp514x_regs[REG_OUTPUT_FORMATTER1].val = output_sel; /* Clear status */ msleep(LOCK_RETRY_DELAY); @@ -779,16 +784,16 @@ ioctl_g_ctrl(struct v4l2_int_device *s, struct v4l2_control *ctrl) switch (ctrl->id) { case V4L2_CID_BRIGHTNESS: - ctrl->value = tvp514x_reg_list[REG_BRIGHTNESS].val; + ctrl->value = decoder->tvp514x_regs[REG_BRIGHTNESS].val; break; case V4L2_CID_CONTRAST: - ctrl->value = tvp514x_reg_list[REG_CONTRAST].val; + ctrl->value = decoder->tvp514x_regs[REG_CONTRAST].val; break; case V4L2_CID_SATURATION: - ctrl->value = tvp514x_reg_list[REG_SATURATION].val; + ctrl->value = decoder->tvp514x_regs[REG_SATURATION].val; break; case V4L2_CID_HUE: - ctrl->value = tvp514x_reg_list[REG_HUE].val; + ctrl->value = decoder->tvp514x_regs[REG_HUE].val; if (ctrl->value == 0x7F) ctrl->value = 180; else if (ctrl->value == 0x80) @@ -798,7 +803,7 @@ ioctl_g_ctrl(struct v4l2_int_device *s, struct v4l2_control *ctrl) break; case V4L2_CID_AUTOGAIN: - ctrl->value = tvp514x_reg_list[REG_AFE_GAIN_CTRL].val; + ctrl->value = decoder->tvp514x_regs[REG_AFE_GAIN_CTRL].val; if ((ctrl->value & 0x3) == 3) ctrl->value = 1; else @@ -848,7 +853,7 @@ ioctl_s_ctrl(struct v4l2_int_device *s, struct v4l2_control *ctrl) value); if (err) return err; - tvp514x_reg_list[REG_BRIGHTNESS].val = value; + decoder->tvp514x_regs[REG_BRIGHTNESS].val = value; break; case V4L2_CID_CONTRAST: if (ctrl->value < 0 || ctrl->value > 255) { @@ -861,7 +866,7 @@ ioctl_s_ctrl(struct v4l2_int_device *s, struct v4l2_control *ctrl) value); if (err) return err; - tvp514x_reg_list[REG_CONTRAST].val = value; + decoder->tvp514x_regs[REG_CONTRAST].val = value; break; case V4L2_CID_SATURATION: if (ctrl->value < 0 || ctrl->value > 255) { @@ -874,7 +879,7 @@ ioctl_s_ctrl(struct v4l2_int_device *s, struct v4l2_control *ctrl) value); if (err) return err; - tvp514x_reg_list[REG_SATURATION].val = value; + decoder->tvp514x_regs[REG_SATURATION].val = value; break; case V4L2_CID_HUE: if (value == 180) @@ -893,7 +898,7 @@ ioctl_s_ctrl(struct v4l2_int_device *s, struct v4l2_control *ctrl) value); if (err) return err; - tvp514x_reg_list[REG_HUE].val = value; + decoder->tvp514x_regs[REG_HUE].val = value; break; case V4L2_CID_AUTOGAIN: if (value == 1) @@ -910,7 +915,7 @@ ioctl_s_ctrl(struct v4l2_int_device *s, struct v4l2_control *ctrl) value); if (err) return err; - tvp514x_reg_list[REG_AFE_GAIN_CTRL].val = value; + decoder->tvp514x_regs[REG_AFE_GAIN_CTRL].val = value; break; default: v4l_err(decoder->client, @@ -1275,7 +1280,7 @@ static int ioctl_init(struct v4l2_int_device *s) struct tvp514x_decoder *decoder = s->priv; /* Set default standard to auto */ - tvp514x_reg_list[REG_VIDEO_STD].val = + decoder->tvp514x_regs[REG_VIDEO_STD].val = VIDEO_STD_AUTO_SWITCH_BIT; return tvp514x_configure(decoder); @@ -1344,11 +1349,6 @@ static struct v4l2_int_ioctl_desc tvp514x_ioctl_desc[] = { (v4l2_int_ioctl_func *) ioctl_s_routing}, }; -static struct v4l2_int_slave tvp514x_slave = { - .ioctls = tvp514x_ioctl_desc, - .num_ioctls = ARRAY_SIZE(tvp514x_ioctl_desc), -}; - static struct tvp514x_decoder tvp514x_dev = { .state = STATE_NOT_DETECTED, @@ -1369,17 +1369,15 @@ static struct tvp514x_decoder tvp514x_dev = { .current_std = STD_NTSC_MJ, .std_list = tvp514x_std_list, .num_stds = ARRAY_SIZE(tvp514x_std_list), - -}; - -static struct v4l2_int_device tvp514x_int_device = { - .module = THIS_MODULE, - .name = TVP514X_MODULE_NAME, - .priv = &tvp514x_dev, - .type = v4l2_int_type_slave, - .u = { - .slave = &tvp514x_slave, - }, + .v4l2_int_device = { + .module = THIS_MODULE, + .name = TVP514X_MODULE_NAME, + .type = v4l2_int_type_slave, + }, + .tvp514x_slave = { + .ioctls = tvp514x_ioctl_desc, + .num_ioctls = ARRAY_SIZE(tvp514x_ioctl_desc), + }, }; /** @@ -1392,26 +1390,37 @@ static struct v4l2_int_device tvp514x_int_device = { static int tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id) { - struct tvp514x_decoder *decoder = &tvp514x_dev; + struct tvp514x_decoder *decoder; int err; /* Check if the adapter supports the needed features */ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -EIO; - decoder->pdata = client->dev.platform_data; - if (!decoder->pdata) { + decoder = kzalloc(sizeof(*decoder), GFP_KERNEL); + if (!decoder) + return -ENOMEM; + + if (!client->dev.platform_data) { v4l_err(client, "No platform data!!\n"); - return -ENODEV; + err = -ENODEV; + goto out_free; } + + *decoder = tvp514x_dev; + decoder->v4l2_int_device.priv = decoder; + decoder->pdata = client->dev.platform_data; + decoder->v4l2_int_device.u.slave = &decoder->tvp514x_slave; + memcpy(decoder->tvp514x_regs, tvp514x_reg_list_default, + sizeof(tvp514x_reg_list_default)); /* * Fetch platform specific data, and configure the * tvp514x_reg_list[] accordingly. Since this is one * time configuration, no need to preserve. */ - tvp514x_reg_list[REG_OUTPUT_FORMATTER2].val |= + decoder->tvp514x_regs[REG_OUTPUT_FORMATTER2].val |= (decoder->pdata->clk_polarity << 1); - tvp514x_reg_list[REG_SYNC_CONTROL].val |= + decoder->tvp514x_regs[REG_SYNC_CONTROL].val |= ((decoder->pdata->hs_polarity << 2) | (decoder->pdata->vs_polarity << 3)); /* @@ -1419,23 +1428,26 @@ tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id) */ decoder->id = (struct i2c_device_id *)id; /* Attach to Master */ - strcpy(tvp514x_int_device.u.slave->attach_to, decoder->pdata->master); - decoder->v4l2_int_device = &tvp514x_int_device; + strcpy(decoder->v4l2_int_device.u.slave->attach_to, decoder->pdata->master); decoder->client = client; i2c_set_clientdata(client, decoder); /* Register with V4L2 layer as slave device */ - err = v4l2_int_device_register(decoder->v4l2_int_device); + err = v4l2_int_device_register(&decoder->v4l2_int_device); if (err) { i2c_set_clientdata(client, NULL); v4l_err(client, "Unable to register to v4l2. Err[%d]\n", err); + goto out_free; } else v4l_info(client, "Registered to v4l2 master %s!!\n", decoder->pdata->master); - return 0; + +out_free: + kfree(decoder); + return err; } /** @@ -1452,9 +1464,9 @@ static int __exit tvp514x_remove(struct i2c_client *client) if (!client->adapter) return -ENODEV; /* our client isn't attached */ - v4l2_int_device_unregister(decoder->v4l2_int_device); + v4l2_int_device_unregister(&decoder->v4l2_int_device); i2c_set_clientdata(client, NULL); - + kfree(decoder); return 0; } /*
because they might design two of those chips on a single board. You never know. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> --- Sorry for the delay. While I was preparing v2 I lost the tvp514x_slave chunk. Now I see a can see a picture error when I plug two codecs simultaneity but this could be also a bug in my cam driver. v3: - addressed review comments - move tvp514x_slave into decoder struct it is used per device while registering / comparing v2: Make the content of the registers (brightness, \ldots) per decoder and not global. v1: Initial version drivers/media/video/tvp514x.c | 104 +++++++++++++++++++++++------------------ 1 files changed, 58 insertions(+), 46 deletions(-)