@@ -60,23 +60,29 @@ MODULE_LICENSE("GPL");
#define SQ905_PING 0x07 /* when reading an "idling" command */
#define SQ905_READ_DONE 0xc0 /* ack bulk read completed */
+/* Any non-zero value in the bottom 2 bits of the 2nd byte of
+ * the ID appears to indicate the camera can do 640*480. If the
+ * LSB of that byte is set the image is just upside down, otherwise
+ * it is rotated 180 degrees. */
+#define SQ905_HIRES_MASK 0x00000300
+#define SQ905_ORIENTATION_MASK 0x00000100
+
/* Some command codes. These go in the "index" slot. */
#define SQ905_ID 0xf0 /* asks for model string */
#define SQ905_CONFIG 0x20 /* gets photo alloc. table, not used here */
#define SQ905_DATA 0x30 /* accesses photo data, not used here */
#define SQ905_CLEAR 0xa0 /* clear everything */
-#define SQ905_CAPTURE_LOW 0x60 /* Starts capture at 160x120 */
-#define SQ905_CAPTURE_MED 0x61 /* Starts capture at 320x240 */
+#define SQ905_CAPTURE_LOW 0x60 /* Starts capture at 160x120 */
+#define SQ905_CAPTURE_MED 0x61 /* Starts capture at 320x240 */
+#define SQ905_CAPTURE_HIGH 0x62 /* Starts capture at 640x480 (some cams only) */
/* note that the capture command also controls the output dimensions */
-/* 0x60 -> 160x120, 0x61 -> 320x240 0x62 -> 640x480 depends on camera */
-/* 0x62 is not correct, at least for some cams. Should be 0x63 ? */
/* Structure to hold all of our device specific stuff */
struct sd {
struct gspca_dev gspca_dev; /* !! must be the first item */
- u8 cam_type;
+ const struct v4l2_pix_format *cap_mode;
/*
* Driver stuff
@@ -85,31 +91,22 @@ struct sd {
struct workqueue_struct *work_thread;
};
-/* The driver only supports 320x240 so far. */
-static struct v4l2_pix_format sq905_mode[1] = {
+static struct v4l2_pix_format sq905_mode[] = {
+ { 160, 120, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+ .bytesperline = 160,
+ .sizeimage = 160 * 120,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 0},
{ 320, 240, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
.bytesperline = 320,
.sizeimage = 320 * 240,
.colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 0},
+ { 640, 480, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+ .bytesperline = 640,
+ .sizeimage = 640 * 480,
+ .colorspace = V4L2_COLORSPACE_SRGB,
.priv = 0}
-};
-
-struct cam_type {
- u32 ident_word;
- char *name;
- struct v4l2_pix_format *min_mode;
- u8 num_modes;
- u8 sensor_flags;
-};
-
-#define SQ905_FLIP_HORIZ (1 << 0)
-#define SQ905_FLIP_VERT (1 << 1)
-
-/* Last entry is default if nothing else matches */
-static struct cam_type cam_types[] = {
- { 0x19010509, "PocketCam", &sq905_mode[0], 1, SQ905_FLIP_HORIZ },
- { 0x32010509, "Magpix", &sq905_mode[0], 1, SQ905_FLIP_HORIZ },
- { 0, "Default", &sq905_mode[0], 1, SQ905_FLIP_HORIZ | SQ905_FLIP_VERT }
};
/*
@@ -240,7 +237,7 @@ static void sq905_dostream(struct work_s
/* request some data and then read it until we have
* a complete frame. */
- bytes_left = sq905_mode[0].sizeimage + FRAME_HEADER_LEN;
+ bytes_left = dev->cap_mode->sizeimage + FRAME_HEADER_LEN;
header_read = 0;
discarding = 0;
@@ -272,11 +269,18 @@ static void sq905_dostream(struct work_s
packet_type = INTER_PACKET;
}
frame = gspca_get_i_frame(gspca_dev);
- if (frame && !discarding)
+ if (frame && !discarding) {
gspca_frame_add(gspca_dev, packet_type,
frame, data, data_len);
- else
+ /* If entire frame fits in one packet we still
+ need to add a LAST_PACKET */
+ if ((packet_type == FIRST_PACKET) &&
+ (bytes_left == 0))
+ gspca_frame_add(gspca_dev, LAST_PACKET,
+ frame, data, 0);
+ } else {
discarding = 1;
+ }
}
/* acknowledge the frame */
mutex_lock(&gspca_dev->usb_lock);
@@ -301,8 +305,6 @@ static int sd_config(struct gspca_dev *g
struct cam *cam = &gspca_dev->cam;
struct sd *dev = (struct sd *) gspca_dev;
- cam->cam_mode = sq905_mode;
- cam->nmodes = 1;
/* We don't use the buffer gspca allocates so make it small. */
cam->bulk_size = 64;
@@ -328,7 +330,6 @@ static void sd_stop0(struct gspca_dev *g
/* this function is called at probe and resume time */
static int sd_init(struct gspca_dev *gspca_dev)
{
- struct sd *dev = (struct sd *) gspca_dev;
u32 ident;
int ret;
@@ -344,17 +345,18 @@ static int sd_init(struct gspca_dev *gsp
ret = sq905_read_data(gspca_dev, gspca_dev->usb_buf, 4);
if (ret < 0)
return ret;
- /* usb_buf is allocated with kmalloc so is aligned. */
- ident = le32_to_cpup((u32 *)gspca_dev->usb_buf);
+ /* usb_buf is allocated with kmalloc so is aligned.
+ * Camera model number is the right way round if we assume this
+ * reverse engineered ID is supposed to be big endian. */
+ ident = be32_to_cpup((__be32 *)gspca_dev->usb_buf);
ret = sq905_command(gspca_dev, SQ905_CLEAR);
if (ret < 0)
return ret;
- dev->cam_type = 0;
- while (dev->cam_type < ARRAY_SIZE(cam_types) - 1 &&
- ident != cam_types[dev->cam_type].ident_word)
- dev->cam_type++;
- PDEBUG(D_CONF, "SQ905 camera %s, ID %08x detected",
- cam_types[dev->cam_type].name, ident);
+ PDEBUG(D_CONF, "SQ905 camera ID %08x detected", ident);
+ gspca_dev->cam.cam_mode = sq905_mode;
+ gspca_dev->cam.nmodes = ARRAY_SIZE(sq905_mode);
+ if (!(ident & SQ905_HIRES_MASK))
+ gspca_dev->cam.nmodes--;
return 0;
}
@@ -364,13 +366,29 @@ static int sd_start(struct gspca_dev *gs
struct sd *dev = (struct sd *) gspca_dev;
int ret;
+ /* Set capture mode based on selected resolution. */
+ dev->cap_mode = gspca_dev->cam.cam_mode;
/* "Open the shutter" and set size, to start capture */
- ret = sq905_command(&dev->gspca_dev, SQ905_CAPTURE_MED);
+ switch (gspca_dev->width) {
+ case 640:
+ PDEBUG(D_STREAM, "Start streaming at high resolution");
+ dev->cap_mode += 2;
+ ret = sq905_command(&dev->gspca_dev, SQ905_CAPTURE_HIGH);
+ break;
+ case 320:
+ PDEBUG(D_STREAM, "Start streaming at medium resolution");
+ dev->cap_mode++;
+ ret = sq905_command(&dev->gspca_dev, SQ905_CAPTURE_MED);
+ break;
+ default:
+ PDEBUG(D_STREAM, "Start streaming at low resolution");
+ ret = sq905_command(&dev->gspca_dev, SQ905_CAPTURE_LOW);
+ }
+
if (ret < 0) {
PDEBUG(D_ERR, "Start streaming command failed");
return ret;
}
-
/* Start the workqueue function to do the streaming */
dev->work_thread = create_singlethread_workqueue(MODULE_NAME);
queue_work(dev->work_thread, &dev->work_struct);
Add support for the alternate resolutions offered by SQ-905 based cameras. As well as 320x240 all cameras can do 160x120 and some can do 640x480. Signed-off-by: Adam Baker <linux@baker-net.org.uk> --- The patch to detect orientation needs to follow this as that is also simplified by the modified identity check that this introduces. --- -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html