@@ -282,6 +282,7 @@
#define SAA7134_BOARD_HAUPPAUGE_HVR1120 155
#define SAA7134_BOARD_HAUPPAUGE_HVR1110R3 156
#define SAA7134_BOARD_AVERMEDIA_STUDIO_507UA 157
+#define SAA7134_BOARD_AVERMEDIA_CARDBUS_501 158
#define SAA7134_MAXBOARDS 32
#define SAA7134_INPUT_MAX 8
@@ -1669,6 +1669,39 @@
.amux = LINE1,
},
},
+ [SAA7134_BOARD_AVERMEDIA_CARDBUS_501] = {
+ /* Oldrich Jedlicka <oldium.pro@seznam.cz> */
+ .name = "AVerMedia Cardbus TV/Radio (E501R)",
+ .audio_clock = 0x187de7,
+ .tuner_type = TUNER_ALPS_TSBE5_PAL,
+ .radio_type = TUNER_TEA5767,
+ .tuner_addr = 0x61,
+ .radio_addr = 0x60,
+ .tda9887_conf = TDA9887_PRESENT,
+ .gpiomask = 0x08000000,
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 1,
+ .amux = TV,
+ .tv = 1,
+ .gpio = 0x08000000,
+ },{
+ .name = name_comp1,
+ .vmux = 3,
+ .amux = LINE1,
+ .gpio = 0x08000000,
+ },{
+ .name = name_svideo,
+ .vmux = 8,
+ .amux = LINE1,
+ .gpio = 0x08000000,
+ }},
+ .radio = {
+ .name = name_radio,
+ .amux = LINE2,
+ .gpio = 0x00000000,
+ },
+ },
[SAA7134_BOARD_CINERGY400_CARDBUS] = {
.name = "Terratec Cinergy 400 mobile",
.audio_clock = 0x187de7,
@@ -5104,6 +5137,13 @@
.subdevice = 0xd6ee,
.driver_data = SAA7134_BOARD_AVERMEDIA_CARDBUS,
},{
+ /* AVerMedia CardBus */
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7134,
+ .subvendor = 0x1461, /* Avermedia Technologies Inc */
+ .subdevice = 0xb7e9,
+ .driver_data = SAA7134_BOARD_AVERMEDIA_CARDBUS_501,
+ },{
/* TransGear 3000TV */
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7130,
@@ -6341,6 +6381,16 @@
saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0xffffffff, 0xffffffff);
msleep(10);
break;
+ case SAA7134_BOARD_AVERMEDIA_CARDBUS_501:
+ /* power-down tuner chip */
+ saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x08400000, 0x08400000);
+ saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x08400000, 0);
+ msleep(10);
+ saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x08400000, 0x08400000);
+ saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x08400000, 0x08400000);
+ msleep(10);
+ dev->has_remote = SAA7134_REMOTE_I2C;
+ break;
case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
saa7134_set_gpio(dev, 23, 0);
msleep(10);
@@ -6782,6 +6832,7 @@
switch (dev->board) {
case SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM:
+ case SAA7134_BOARD_AVERMEDIA_CARDBUS_501:
{
struct v4l2_priv_tun_config tea5767_cfg;
struct tea5767_ctrl ctl;
Here comes the full support for AVerMedia Cardbus Plus (E501R) - including remote control. TV, Composite and FM radio tested, I don't have S-Video to test. I've figured out that the radio works only with xtal frequency 13MHz. Now without word-wrapping. Signed-off-by: OldÅ™ich JedliÄka <oldium.pro@seznam.cz> --- -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html