@@ -601,7 +601,7 @@ static void pwc_snapshot_button(struct pwc_device *pdev, int down)
#ifdef CONFIG_USB_PWC_INPUT_EVDEV
if (pdev->button_dev) {
- input_report_key(pdev->button_dev, BTN_0, down);
+ input_report_key(pdev->button_dev, KEY_CAMERA, down);
input_sync(pdev->button_dev);
}
#endif
@@ -1847,7 +1847,7 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
usb_to_input_id(pdev->udev, &pdev->button_dev->id);
pdev->button_dev->dev.parent = &pdev->udev->dev;
pdev->button_dev->evbit[0] = BIT_MASK(EV_KEY);
- pdev->button_dev->keybit[BIT_WORD(BTN_0)] = BIT_MASK(BTN_0);
+ pdev->button_dev->keybit[BIT_WORD(KEY_CAMERA)] = BIT_MASK(KEY_CAMERA);
rc = input_register_device(pdev->button_dev);
if (rc) {
@@ -240,7 +240,7 @@ static void konicawc_register_input(struct konicawc *cam, struct usb_device *dev
input_dev->dev.parent = &dev->dev;
input_dev->evbit[0] = BIT_MASK(EV_KEY);
- input_dev->keybit[BIT_WORD(BTN_0)] = BIT_MASK(BTN_0);
+ input_dev->keybit[BIT_WORD(KEY_CAMERA)] = BIT_MASK(KEY_CAMERA);
error = input_register_device(cam->input);
if (error) {
@@ -263,7 +263,7 @@ static void konicawc_unregister_input(struct konicawc *cam)
static void konicawc_report_buttonstat(struct konicawc *cam)
{
if (cam->input) {
- input_report_key(cam->input, BTN_0, cam->buttonsts);
+ input_report_key(cam->input, KEY_CAMERA, cam->buttonsts);
input_sync(cam->input);
}
}
@@ -103,7 +103,7 @@ static void qcm_register_input(struct qcm *cam, struct usb_device *dev)
input_dev->dev.parent = &dev->dev;
input_dev->evbit[0] = BIT_MASK(EV_KEY);
- input_dev->keybit[BIT_WORD(BTN_0)] = BIT_MASK(BTN_0);
+ input_dev->keybit[BIT_WORD(KEY_CAMERA)] = BIT_MASK(KEY_CAMERA);
error = input_register_device(cam->input);
if (error) {
@@ -126,7 +126,7 @@ static void qcm_unregister_input(struct qcm *cam)
static void qcm_report_buttonstat(struct qcm *cam)
{
if (cam->input) {
- input_report_key(cam->input, BTN_0, cam->button_sts);
+ input_report_key(cam->input, KEY_CAMERA, cam->button_sts);
input_sync(cam->input);
}
}
A bunch of V4L drivers generate BTN_0 instead of KEY_CAMERA key presses. X11 is able to handle KEY_CAMERA automatically these days while BTN_0 is not treated at all. Thus it would be of big benefit if the camera drivers would consistently generate KEY_CAMERA. Some drivers (uvc) already do, this patch updates the remaining drivers to do the same. I only possess a limited set of webcams, so this isn't tested with all cameras. The patch is rather trivial and compile tested, so I'd say it's still good enough to get merged. You decide! (Resent 2nd time, due to missing Signed-off-by) Lennart Signed-off-by: Lennart Poettering <mzxreary@0pointer.de> --- drivers/media/video/pwc/pwc-if.c | 4 ++-- drivers/media/video/usbvideo/konicawc.c | 4 ++-- drivers/media/video/usbvideo/quickcam_messenger.c | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-)