diff mbox

[3/3,v2] lirc driver for SoundGraph iMON IR receivers and displays

Message ID 200910201000.57536.jarod@redhat.com (mailing list archive)
State RFC
Delegated to: Mauro Carvalho Chehab
Headers show

Commit Message

Jarod Wilson Oct. 20, 2009, 2 p.m. UTC
None
diff mbox

Patch

Index: b/drivers/input/lirc/Kconfig
===================================================================
--- a/drivers/input/lirc/Kconfig
+++ b/drivers/input/lirc/Kconfig
@@ -11,6 +11,12 @@  menuconfig INPUT_LIRC
 
 if INPUT_LIRC
 
+config LIRC_IMON
+	tristate "SoundGraph iMON Receiver and Display"
+	depends on LIRC_DEV
+	help
+	  Driver for the SoundGraph iMON IR Receiver and Display
+
 config LIRC_MCEUSB
 	tristate "Windows Media Center Ed. USB IR Transceiver"
 	depends on LIRC_DEV && USB
Index: b/drivers/input/lirc/Makefile
===================================================================
--- a/drivers/input/lirc/Makefile
+++ b/drivers/input/lirc/Makefile
@@ -4,4 +4,5 @@ 
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_INPUT_LIRC)	+= lirc_dev.o
+obj-$(CONFIG_LIRC_IMON)		+= lirc_imon.o
 obj-$(CONFIG_LIRC_MCEUSB)	+= lirc_mceusb.o
Index: b/drivers/input/lirc/lirc_imon.c
===================================================================
--- /dev/null
+++ b/drivers/input/lirc/lirc_imon.c
@@ -0,0 +1,2471 @@ 
+/*
+ *   lirc_imon.c:  LIRC/VFD/LCD driver for SoundGraph iMON IR/VFD/LCD
+ *		   including the iMON PAD model
+ *
+ *   Copyright(C) 2004  Venky Raju(dev@venky.ws)
+ *   Copyright(C) 2009  Jarod Wilson <jarod@wilsonet.com>
+ *
+ *   lirc_imon is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+#include <linux/usb/input.h>
+#include <linux/time.h>
+#include <linux/timer.h>
+
+#include "lirc.h"
+#include "lirc_dev.h"
+#include "lirc_imon.h"
+
+
+#define MOD_AUTHOR	"Venky Raju <dev@venky.ws>"
+#define MOD_AUTHOR2	"Jarod Wilson <jarod@wilsonet.com>"
+#define MOD_DESC	"Driver for SoundGraph iMON MultiMedia IR/Display"
+#define MOD_NAME	"lirc_imon"
+#define MOD_VERSION	"0.7"
+
+#define DISPLAY_MINOR_BASE	144
+#define DEVICE_NAME	"lcd%d"
+
+#define BUF_CHUNK_SIZE	4
+#define BUF_SIZE	128
+
+#define BIT_DURATION	250	/* each bit received is 250us */
+
+#define IMON_CLOCK_ENABLE_PACKETS	2
+
+/*** P R O T O T Y P E S ***/
+
+/* USB Callback prototypes */
+static int imon_probe(struct usb_interface *interface,
+		      const struct usb_device_id *id);
+static void imon_disconnect(struct usb_interface *interface);
+static void usb_rx_callback_intf0(struct urb *urb);
+static void usb_rx_callback_intf1(struct urb *urb);
+static void usb_tx_callback(struct urb *urb);
+
+/* suspend/resume support */
+static int imon_resume(struct usb_interface *intf);
+static int imon_suspend(struct usb_interface *intf, pm_message_t message);
+
+/* Display file_operations function prototypes */
+static int display_open(struct inode *inode, struct file *file);
+static int display_close(struct inode *inode, struct file *file);
+
+/* VFD write operation */
+static ssize_t vfd_write(struct file *file, const char *buf,
+			 size_t n_bytes, loff_t *pos);
+
+/* LCD file_operations override function prototypes */
+static ssize_t lcd_write(struct file *file, const char *buf,
+			 size_t n_bytes, loff_t *pos);
+
+/* LIRC driver function prototypes */
+static int ir_open(void *data);
+static void ir_close(void *data);
+
+/* Driver init/exit prototypes */
+static int __init imon_init(void);
+static void __exit imon_exit(void);
+
+/*** G L O B A L S ***/
+
+struct imon_context {
+	struct usb_device *usbdev_intf0;
+	/* Newer devices have two interfaces */
+	struct usb_device *usbdev_intf1;
+	int display_supported;		/* not all controllers do */
+	int display_isopen;		/* display port has been opened */
+	int ir_isopen;			/* IR port open	*/
+	int ir_isassociating;		/* IR port open for association */
+	int dev_present_intf0;		/* USB device presence, interface 0 */
+	int dev_present_intf1;		/* USB device presence, interface 1 */
+	struct mutex lock;		/* to lock this object */
+	wait_queue_head_t remove_ok;	/* For unexpected USB disconnects */
+
+	int vfd_proto_6p;		/* some VFD require a 6th packet */
+	int ir_onboard_decode;		/* IR signals decoded onboard */
+
+	struct lirc_driver *driver;
+	struct usb_endpoint_descriptor *rx_endpoint_intf0;
+	struct usb_endpoint_descriptor *rx_endpoint_intf1;
+	struct usb_endpoint_descriptor *tx_endpoint;
+	struct urb *rx_urb_intf0;
+	struct urb *rx_urb_intf1;
+	struct urb *tx_urb;
+	int tx_control;
+	unsigned char usb_rx_buf[8];
+	unsigned char usb_tx_buf[8];
+
+	struct rx_data {
+		int count;		/* length of 0 or 1 sequence */
+		int prev_bit;		/* logic level of sequence */
+		int initial_space;	/* initial space flag */
+	} rx;
+
+	struct tx_t {
+		unsigned char data_buf[35];	/* user data buffer */
+		struct completion finished;	/* wait for write to finish */
+		atomic_t busy;			/* write in progress */
+		int status;			/* status of tx completion */
+	} tx;
+
+	int ffdc_dev;			/* is this the overused ffdc ID? */
+	int ir_protocol;		/* iMON or MCE (RC6) IR protocol? */
+	struct input_dev *idev;		/* input device for remote */
+	struct input_dev *touch;	/* input device for touchscreen */
+	u16 last_keycode;		/* last reported input keycode */
+	u8 last_mce_byte;		/* last mce toggle byte */
+	int display_type;		/* store the display type */
+	int pad_mouse;			/* toggle kbd(0)/mouse(1) mode */
+	int touch_x;			/* x coordinate on touchscreen */
+	int touch_y;			/* y coordinate on touchscreen */
+	char name_idev[128];
+	char phys_idev[64];
+	char name_touch[128];
+	char phys_touch[64];
+	struct timer_list timer;
+};
+
+#define TOUCH_TIMEOUT	(HZ/30)
+
+/* display file operations. Nb: lcd_write will be subbed in as needed later */
+static struct file_operations display_fops = {
+	.owner		= THIS_MODULE,
+	.open		= &display_open,
+	.write		= &vfd_write,
+	.release	= &display_close
+};
+
+enum {
+	IMON_DISPLAY_TYPE_AUTO = 0,
+	IMON_DISPLAY_TYPE_VFD  = 1,
+	IMON_DISPLAY_TYPE_LCD  = 2,
+	IMON_DISPLAY_TYPE_VGA  = 3,
+	IMON_DISPLAY_TYPE_NONE = 4,
+};
+
+enum {
+	IMON_IR_PROTOCOL_IMON       = 0,
+	IMON_IR_PROTOCOL_MCE        = 1,
+	IMON_IR_PROTOCOL_IMON_NOPAD = 2,
+};
+/*
+ * USB Device ID for iMON USB Control Boards
+ *
+ * The Windows drivers contain 6 different inf files, more or less one for
+ * each new device until the 0x0034-0x0046 devices, which all use the same
+ * driver. Some of the devices in the 34-46 range haven't been definitively
+ * identified yet. Early devices have either a TriGem Computer, Inc. or a
+ * Samsung vendor ID (0x0aa8 and 0x04e8 respectively), while all later
+ * devices use the SoundGraph vendor ID (0x15c2).
+ */
+static struct usb_device_id imon_usb_id_table[] = {
+	/* TriGem iMON (IR only) -- TG_iMON.inf */
+	{ USB_DEVICE(0x0aa8, 0x8001) },
+
+	/* SoundGraph iMON (IR only) -- sg_imon.inf */
+	{ USB_DEVICE(0x04e8, 0xff30) },
+
+	/* SoundGraph iMON VFD (IR & VFD) -- iMON_VFD.inf */
+	{ USB_DEVICE(0x0aa8, 0xffda) },
+
+	/* SoundGraph iMON SS (IR & VFD) -- iMON_SS.inf */
+	{ USB_DEVICE(0x15c2, 0xffda) },
+
+	/*
+	 * Several devices with this same device ID, all use iMON_PAD.inf
+	 * SoundGraph iMON PAD (IR & VFD)
+	 * SoundGraph iMON PAD (IR & LCD)
+	 * SoundGraph iMON Knob (IR only)
+	 */
+	{ USB_DEVICE(0x15c2, 0xffdc) },
+
+	/*
+	 * Newer devices, all driven by the latest iMON Windows driver, full
+	 * list of device IDs extracted via 'strings Setup/data1.hdr |grep 15c2'
+	 * Need user input to fill in details on unknown devices.
+	 */
+	/* SoundGraph iMON OEM Touch LCD (IR & 7" VGA LCD) */
+	{ USB_DEVICE(0x15c2, 0x0034) },
+	/* SoundGraph iMON OEM Touch LCD (IR & 4.3" VGA LCD) */
+	{ USB_DEVICE(0x15c2, 0x0035) },
+	/* SoundGraph iMON OEM VFD (IR & VFD) */
+	{ USB_DEVICE(0x15c2, 0x0036) },
+	/* device specifics unknown */
+	{ USB_DEVICE(0x15c2, 0x0037) },
+	/* SoundGraph iMON OEM LCD (IR & LCD) */
+	{ USB_DEVICE(0x15c2, 0x0038) },
+	/* device specifics unknown */
+	{ USB_DEVICE(0x15c2, 0x0039) },
+	/* device specifics unknown */
+	{ USB_DEVICE(0x15c2, 0x003a) },
+	/* device specifics unknown */
+	{ USB_DEVICE(0x15c2, 0x003b) },
+	/* SoundGraph iMON OEM Inside (IR only) */
+	{ USB_DEVICE(0x15c2, 0x003c) },
+	/* device specifics unknown */
+	{ USB_DEVICE(0x15c2, 0x003d) },
+	/* device specifics unknown */
+	{ USB_DEVICE(0x15c2, 0x003e) },
+	/* device specifics unknown */
+	{ USB_DEVICE(0x15c2, 0x003f) },
+	/* device specifics unknown */
+	{ USB_DEVICE(0x15c2, 0x0040) },
+	/* SoundGraph iMON MINI (IR only) */
+	{ USB_DEVICE(0x15c2, 0x0041) },
+	/* Antec Veris Multimedia Station EZ External (IR only) */
+	{ USB_DEVICE(0x15c2, 0x0042) },
+	/* Antec Veris Multimedia Station Basic Internal (IR only) */
+	{ USB_DEVICE(0x15c2, 0x0043) },
+	/* Antec Veris Multimedia Station Elite (IR & VFD) */
+	{ USB_DEVICE(0x15c2, 0x0044) },
+	/* Antec Veris Multimedia Station Premiere (IR & LCD) */
+	{ USB_DEVICE(0x15c2, 0x0045) },
+	/* device specifics unknown */
+	{ USB_DEVICE(0x15c2, 0x0046) },
+	{}
+};
+
+/* Some iMON VFD models requires a 6th packet for VFD writes */
+static struct usb_device_id vfd_proto_6p_list[] = {
+	{ USB_DEVICE(0x15c2, 0xffda) },
+	{ USB_DEVICE(0x15c2, 0xffdc) },
+	{ USB_DEVICE(0x15c2, 0x0036) },
+	{ USB_DEVICE(0x15c2, 0x0044) },
+	{}
+};
+
+/* newer iMON models use control endpoints */
+static struct usb_device_id ctl_ep_device_list[] = {
+	{ USB_DEVICE(0x15c2, 0x0034) },
+	{ USB_DEVICE(0x15c2, 0x0035) },
+	{ USB_DEVICE(0x15c2, 0x0036) },
+	{ USB_DEVICE(0x15c2, 0x0037) },
+	{ USB_DEVICE(0x15c2, 0x0038) },
+	{ USB_DEVICE(0x15c2, 0x0039) },
+	{ USB_DEVICE(0x15c2, 0x003a) },
+	{ USB_DEVICE(0x15c2, 0x003b) },
+	{ USB_DEVICE(0x15c2, 0x003c) },
+	{ USB_DEVICE(0x15c2, 0x003d) },
+	{ USB_DEVICE(0x15c2, 0x003e) },
+	{ USB_DEVICE(0x15c2, 0x003f) },
+	{ USB_DEVICE(0x15c2, 0x0040) },
+	{ USB_DEVICE(0x15c2, 0x0041) },
+	{ USB_DEVICE(0x15c2, 0x0042) },
+	{ USB_DEVICE(0x15c2, 0x0043) },
+	{ USB_DEVICE(0x15c2, 0x0044) },
+	{ USB_DEVICE(0x15c2, 0x0045) },
+	{ USB_DEVICE(0x15c2, 0x0046) },
+	{}
+};
+
+/* iMON LCD models use a different write op */
+static struct usb_device_id lcd_device_list[] = {
+	{ USB_DEVICE(0x15c2, 0xffdc) },
+	{ USB_DEVICE(0x15c2, 0x0038) },
+	{ USB_DEVICE(0x15c2, 0x0045) },
+	{}
+};
+
+/* iMON devices with front panel buttons or touchscreen need a larger buffer */
+static struct usb_device_id large_buffer_list[] = {
+	{ USB_DEVICE(0x15c2, 0x0034) },
+	{ USB_DEVICE(0x15c2, 0x0035) },
+	{ USB_DEVICE(0x15c2, 0x0038) },
+	{ USB_DEVICE(0x15c2, 0x0045) },
+};
+
+/* Newer iMON models decode the signal onboard */
+static struct usb_device_id ir_onboard_decode_list[] = {
+	{ USB_DEVICE(0x15c2, 0xffdc) },
+	{ USB_DEVICE(0x15c2, 0x0034) },
+	{ USB_DEVICE(0x15c2, 0x0035) },
+	{ USB_DEVICE(0x15c2, 0x0036) },
+	{ USB_DEVICE(0x15c2, 0x0037) },
+	{ USB_DEVICE(0x15c2, 0x0038) },
+	{ USB_DEVICE(0x15c2, 0x0039) },
+	{ USB_DEVICE(0x15c2, 0x003a) },
+	{ USB_DEVICE(0x15c2, 0x003b) },
+	{ USB_DEVICE(0x15c2, 0x003c) },
+	{ USB_DEVICE(0x15c2, 0x003d) },
+	{ USB_DEVICE(0x15c2, 0x003e) },
+	{ USB_DEVICE(0x15c2, 0x003f) },
+	{ USB_DEVICE(0x15c2, 0x0040) },
+	{ USB_DEVICE(0x15c2, 0x0041) },
+	{ USB_DEVICE(0x15c2, 0x0042) },
+	{ USB_DEVICE(0x15c2, 0x0043) },
+	{ USB_DEVICE(0x15c2, 0x0044) },
+	{ USB_DEVICE(0x15c2, 0x0045) },
+	{ USB_DEVICE(0x15c2, 0x0046) },
+	{}
+};
+
+/* Some iMON devices have no lcd/vfd, don't set one up */
+static struct usb_device_id ir_only_list[] = {
+	{ USB_DEVICE(0x0aa8, 0x8001) },
+	{ USB_DEVICE(0x04e8, 0xff30) },
+	/* the first imon lcd and the knob share this device id. :\ */
+	/*{ USB_DEVICE(0x15c2, 0xffdc) },*/
+	{ USB_DEVICE(0x15c2, 0x003c) },
+	{ USB_DEVICE(0x15c2, 0x0041) },
+	{ USB_DEVICE(0x15c2, 0x0042) },
+	{ USB_DEVICE(0x15c2, 0x0043) },
+	{}
+};
+
+/* iMON devices with VGA touchscreens */
+static struct usb_device_id imon_touchscreen_list[] = {
+	{ USB_DEVICE(0x15c2, 0x0034) },
+	{ USB_DEVICE(0x15c2, 0x0035) },
+	{}
+};
+
+/* USB Device data */
+static struct usb_driver imon_driver = {
+	.name		= MOD_NAME,
+	.probe		= imon_probe,
+	.disconnect	= imon_disconnect,
+	.suspend	= imon_suspend,
+	.resume		= imon_resume,
+	.id_table	= imon_usb_id_table,
+};
+
+static struct usb_class_driver imon_class = {
+	.name		= DEVICE_NAME,
+	.fops		= &display_fops,
+	.minor_base	= DISPLAY_MINOR_BASE,
+};
+
+/* to prevent races between open() and disconnect(), probing, etc */
+static DEFINE_MUTEX(driver_lock);
+
+static int debug;
+
+/* lcd, vfd, vga or none? should be auto-detected, but can be overridden... */
+static int display_type;
+
+/* IR protocol: native iMON, Windows MCE (RC-6), or iMON w/o PAD stabilize */
+static int ir_protocol;
+
+/*
+ * In certain use cases, mouse mode isn't really helpful, and could actually
+ * cause confusion, so allow disabling it when the IR device is open.
+ */
+static int nomouse;
+
+/* threshold at which a pad push registers as an arrow key in kbd mode */
+static int pad_thresh;
+
+/* run onboard decode device in lirc mode rather than as pure input device */
+static int lirc_mode;
+
+/***  M O D U L E   C O D E ***/
+
+MODULE_AUTHOR(MOD_AUTHOR);
+MODULE_AUTHOR(MOD_AUTHOR2);
+MODULE_DESCRIPTION(MOD_DESC);
+MODULE_VERSION(MOD_VERSION);
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(usb, imon_usb_id_table);
+module_param(debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug messages: 0=no, 1=yes(default: no)");
+module_param(display_type, int, S_IRUGO);
+MODULE_PARM_DESC(display_type, "Type of attached display. 0=autodetect, "
+		 "1=vfd, 2=lcd, 3=vga, 4=none (default: autodetect)");
+module_param(ir_protocol, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(ir_protocol, "Which IR protocol to use. 0=native iMON, "
+		 "1=Windows Media Center Ed. (RC-6), 2=iMON w/o PAD stabilize "
+		 "(default: native iMON)");
+module_param(nomouse, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(nomouse, "Disable mouse input device mode when IR device is "
+		 "open. 0=don't disable, 1=disable. (default: don't disable)");
+module_param(pad_thresh, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(pad_thresh, "Threshold at which a pad push registers as an "
+		 "arrow key in kbd mode (default: 28)");
+module_param(lirc_mode, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(lirc_mode, "Run onboard decoding receiver in lirc mode rather "
+		 "than as a pure input device");
+
+static void free_imon_context(struct imon_context *context)
+{
+	usb_free_urb(context->tx_urb);
+	usb_free_urb(context->rx_urb_intf0);
+	usb_free_urb(context->rx_urb_intf1);
+	lirc_buffer_free(context->driver->rbuf);
+	kfree(context->driver->rbuf);
+	kfree(context->driver);
+	kfree(context);
+
+	dev_dbg(context->driver->dev, "%s: iMON context freed\n", __func__);
+}
+
+static void deregister_from_lirc(struct imon_context *context)
+{
+	int retval;
+	int minor = context->driver->minor;
+
+	retval = lirc_unregister_driver(minor);
+	if (retval)
+		err("%s: unable to deregister from lirc(%d)",
+			__func__, retval);
+	else
+		printk(KERN_INFO MOD_NAME ": Deregistered iMON driver "
+		       "(minor:%d)\n", minor);
+
+}
+
+/**
+ * Called when the Display device (e.g. /dev/lcd0)
+ * is opened by the application.
+ */
+static int display_open(struct inode *inode, struct file *file)
+{
+	struct usb_interface *interface;
+	struct imon_context *context = NULL;
+	int subminor;
+	int retval = 0;
+
+	/* prevent races with disconnect */
+	mutex_lock(&driver_lock);
+
+	subminor = iminor(inode);
+	interface = usb_find_interface(&imon_driver, subminor);
+	if (!interface) {
+		err("%s: could not find interface for minor %d",
+		    __func__, subminor);
+		retval = -ENODEV;
+		goto exit;
+	}
+	context = usb_get_intfdata(interface);
+
+	if (!context) {
+		err("%s: no context found for minor %d",
+					__func__, subminor);
+		retval = -ENODEV;
+		goto exit;
+	}
+
+	mutex_lock(&context->lock);
+
+	if (!context->display_supported) {
+		err("%s: display not supported by device", __func__);
+		retval = -ENODEV;
+	} else if (context->display_isopen) {
+		err("%s: display port is already open", __func__);
+		retval = -EBUSY;
+	} else {
+		context->display_isopen = 1;
+		file->private_data = context;
+		dev_info(context->driver->dev, "display port opened\n");
+	}
+
+	mutex_unlock(&context->lock);
+
+exit:
+	mutex_unlock(&driver_lock);
+	return retval;
+}
+
+/**
+ * Called when the display device (e.g. /dev/lcd0)
+ * is closed by the application.
+ */
+static int display_close(struct inode *inode, struct file *file)
+{
+	struct imon_context *context = NULL;
+	int retval = 0;
+
+	context = (struct imon_context *)file->private_data;
+
+	if (!context) {
+		err("%s: no context for device", __func__);
+		return -ENODEV;
+	}
+
+	mutex_lock(&context->lock);
+
+	if (!context->display_supported) {
+		err("%s: display not supported by device", __func__);
+		retval = -ENODEV;
+	} else if (!context->display_isopen) {
+		err("%s: display is not open", __func__);
+		retval = -EIO;
+	} else {
+		context->display_isopen = 0;
+		dev_info(context->driver->dev, "display port closed\n");
+		if (!context->dev_present_intf0 && !context->ir_isopen) {
+			/*
+			 * Device disconnected before close and IR port is not
+			 * open. If IR port is open, context will be deleted by
+			 * ir_close.
+			 */
+			mutex_unlock(&context->lock);
+			free_imon_context(context);
+			return retval;
+		}
+	}
+
+	mutex_unlock(&context->lock);
+	return retval;
+}
+
+/**
+ * Sends a packet to the device -- this function must be called
+ * with context->lock held.
+ */
+static int send_packet(struct imon_context *context)
+{
+	unsigned int pipe;
+	int interval = 0;
+	int retval = 0;
+	struct usb_ctrlrequest *control_req = NULL;
+
+	/* Check if we need to use control or interrupt urb */
+	if (!context->tx_control) {
+		pipe = usb_sndintpipe(context->usbdev_intf0,
+				      context->tx_endpoint->bEndpointAddress);
+		interval = context->tx_endpoint->bInterval;
+
+		usb_fill_int_urb(context->tx_urb, context->usbdev_intf0, pipe,
+				 context->usb_tx_buf,
+				 sizeof(context->usb_tx_buf),
+				 usb_tx_callback, context, interval);
+
+		context->tx_urb->actual_length = 0;
+	} else {
+		/* fill request into kmalloc'ed space: */
+		control_req = kmalloc(sizeof(struct usb_ctrlrequest),
+				      GFP_KERNEL);
+		if (control_req == NULL)
+			return -ENOMEM;
+
+		/* setup packet is '21 09 0200 0001 0008' */
+		control_req->bRequestType = 0x21;
+		control_req->bRequest = 0x09;
+		control_req->wValue = cpu_to_le16(0x0200);
+		control_req->wIndex = cpu_to_le16(0x0001);
+		control_req->wLength = cpu_to_le16(0x0008);
+
+		/* control pipe is endpoint 0x00 */
+		pipe = usb_sndctrlpipe(context->usbdev_intf0, 0);
+
+		/* build the control urb */
+		usb_fill_control_urb(context->tx_urb, context->usbdev_intf0,
+				     pipe, (unsigned char *)control_req,
+				     context->usb_tx_buf,
+				     sizeof(context->usb_tx_buf),
+				     usb_tx_callback, context);
+		context->tx_urb->actual_length = 0;
+	}
+
+	init_completion(&context->tx.finished);
+	atomic_set(&(context->tx.busy), 1);
+
+	retval = usb_submit_urb(context->tx_urb, GFP_KERNEL);
+	if (retval) {
+		atomic_set(&(context->tx.busy), 0);
+		err("%s: error submitting urb(%d)", __func__, retval);
+	} else {
+		/* Wait for transmission to complete (or abort) */
+		mutex_unlock(&context->lock);
+		retval = wait_for_completion_interruptible(
+				&context->tx.finished);
+		if (retval)
+			err("%s: task interrupted", __func__);
+		mutex_lock(&context->lock);
+
+		retval = context->tx.status;
+		if (retval)
+			err("%s: packet tx failed (%d)", __func__, retval);
+	}
+
+	kfree(control_req);
+
+	return retval;
+}
+
+/**
+ * Sends an associate packet to the iMON 2.4G.
+ *
+ * This might not be such a good idea, since it has an id collision with
+ * some versions of the "IR & VFD" combo. The only way to determine if it
+ * is an RF version is to look at the product description string. (Which
+ * we currently do not fetch).
+ */
+static int send_associate_24g(struct imon_context *context)
+{
+	int retval;
+	const unsigned char packet[8] = { 0x01, 0x00, 0x00, 0x00,
+					  0x00, 0x00, 0x00, 0x20 };
+
+	if (!context) {
+		err("%s: no context for device", __func__);
+		return -ENODEV;
+	}
+
+	if (!context->dev_present_intf0) {
+		err("%s: no iMON device present", __func__);
+		return -ENODEV;
+	}
+
+	memcpy(context->usb_tx_buf, packet, sizeof(packet));
+	retval = send_packet(context);
+
+	return retval;
+}
+
+/**
+ * Sends packets to setup and show clock on iMON display
+ *
+ * Arguments: year - last 2 digits of year, month - 1..12,
+ * day - 1..31, dow - day of the week (0-Sun...6-Sat),
+ * hour - 0..23, minute - 0..59, second - 0..59
+ */
+static int send_set_imon_clock(struct imon_context *context,
+			       unsigned int year, unsigned int month,
+			       unsigned int day, unsigned int dow,
+			       unsigned int hour, unsigned int minute,
+			       unsigned int second)
+{
+	unsigned char clock_enable_pkt[IMON_CLOCK_ENABLE_PACKETS][8];
+	int retval = 0;
+	int i;
+
+	if (!context) {
+		err("%s: no context for device", __func__);
+		return -ENODEV;
+	}
+
+	switch (context->display_type) {
+	case IMON_DISPLAY_TYPE_LCD:
+		clock_enable_pkt[0][0] = 0x80;
+		clock_enable_pkt[0][1] = year;
+		clock_enable_pkt[0][2] = month-1;
+		clock_enable_pkt[0][3] = day;
+		clock_enable_pkt[0][4] = hour;
+		clock_enable_pkt[0][5] = minute;
+		clock_enable_pkt[0][6] = second;
+
+		clock_enable_pkt[1][0] = 0x80;
+		clock_enable_pkt[1][1] = 0;
+		clock_enable_pkt[1][2] = 0;
+		clock_enable_pkt[1][3] = 0;
+		clock_enable_pkt[1][4] = 0;
+		clock_enable_pkt[1][5] = 0;
+		clock_enable_pkt[1][6] = 0;
+
+		if (context->ffdc_dev) {
+			clock_enable_pkt[0][7] = 0x50;
+			clock_enable_pkt[1][7] = 0x51;
+		} else {
+			clock_enable_pkt[0][7] = 0x88;
+			clock_enable_pkt[1][7] = 0x8a;
+		}
+
+		break;
+
+	case IMON_DISPLAY_TYPE_VFD:
+		clock_enable_pkt[0][0] = year;
+		clock_enable_pkt[0][1] = month-1;
+		clock_enable_pkt[0][2] = day;
+		clock_enable_pkt[0][3] = dow;
+		clock_enable_pkt[0][4] = hour;
+		clock_enable_pkt[0][5] = minute;
+		clock_enable_pkt[0][6] = second;
+		clock_enable_pkt[0][7] = 0x40;
+
+		clock_enable_pkt[1][0] = 0;
+		clock_enable_pkt[1][1] = 0;
+		clock_enable_pkt[1][2] = 1;
+		clock_enable_pkt[1][3] = 0;
+		clock_enable_pkt[1][4] = 0;
+		clock_enable_pkt[1][5] = 0;
+		clock_enable_pkt[1][6] = 0;
+		clock_enable_pkt[1][7] = 0x42;
+
+		break;
+
+	default:
+		return -ENODEV;
+	}
+
+	for (i = 0; i < IMON_CLOCK_ENABLE_PACKETS; i++) {
+		memcpy(context->usb_tx_buf, clock_enable_pkt[i], 8);
+		retval = send_packet(context);
+		if (retval) {
+			err("%s: send_packet failed for packet %d",
+			    __func__, i);
+			break;
+		}
+	}
+
+	return retval;
+}
+
+/**
+ * These are the sysfs functions to handle the association on the iMON 2.4G LT.
+ */
+static ssize_t show_associate_remote(struct device *d,
+				     struct device_attribute *attr,
+				     char *buf)
+{
+	struct imon_context *context = dev_get_drvdata(d);
+
+	if (!context)
+		return -ENODEV;
+
+	mutex_lock(&context->lock);
+	if (context->ir_isassociating)
+		strcpy(buf, "associating\n");
+	else if (context->ir_isopen)
+		strcpy(buf, "open\n");
+	else
+		strcpy(buf, "closed\n");
+
+	dev_info(d, "Visit http://www.lirc.org/html/imon-24g.html for "
+		 "instructions on how to associate your iMON 2.4G DT/LT "
+		 "remote\n");
+	mutex_unlock(&context->lock);
+	return strlen(buf);
+}
+
+static ssize_t store_associate_remote(struct device *d,
+				      struct device_attribute *attr,
+				      const char *buf, size_t count)
+{
+	struct imon_context *context;
+
+	context = dev_get_drvdata(d);
+
+	if (!context)
+		return -ENODEV;
+
+	mutex_lock(&context->lock);
+	if (!context->ir_isopen) {
+		mutex_unlock(&context->lock);
+		return -EINVAL;
+	}
+
+	if (context->ir_isopen) {
+		context->ir_isassociating = 1;
+		send_associate_24g(context);
+	}
+	mutex_unlock(&context->lock);
+
+	return count;
+}
+
+/**
+ * sysfs functions to control internal imon clock
+ */
+static ssize_t show_imon_clock(struct device *d,
+			       struct device_attribute *attr, char *buf)
+{
+	struct imon_context *context = dev_get_drvdata(d);
+	size_t len;
+
+	if (!context)
+		return -ENODEV;
+
+	mutex_lock(&context->lock);
+
+	if (!context->display_supported) {
+		len = snprintf(buf, PAGE_SIZE, "Not supported.");
+	} else {
+		len = snprintf(buf, PAGE_SIZE,
+			"To set the clock on your iMON display:\n"
+			"# date \"+%%y %%m %%d %%w %%H %%M %%S\" > imon_clock\n"
+			"%s", context->display_isopen ?
+			"\nNOTE: imon device must be closed\n" : "");
+	}
+
+	mutex_unlock(&context->lock);
+
+	return len;
+}
+
+static ssize_t store_imon_clock(struct device *d,
+				struct device_attribute *attr,
+				const char *buf, size_t count)
+{
+	struct imon_context *context = dev_get_drvdata(d);
+	ssize_t retval;
+	unsigned int year, month, day, dow, hour, minute, second;
+
+	if (!context)
+		return -ENODEV;
+
+	mutex_lock(&context->lock);
+
+	if (!context->display_supported) {
+		retval = -ENODEV;
+		goto exit;
+	} else if (context->display_isopen) {
+		retval = -EBUSY;
+		goto exit;
+	}
+
+	if (sscanf(buf, "%u %u %u %u %u %u %u",	&year, &month, &day, &dow,
+		   &hour, &minute, &second) != 7) {
+		retval = -EINVAL;
+		goto exit;
+	}
+
+	if ((month < 1 || month > 12) ||
+	    (day < 1 || day > 31) || (dow > 6) ||
+	    (hour > 23) || (minute > 59) || (second > 59)) {
+		retval = -EINVAL;
+		goto exit;
+	}
+
+	retval = send_set_imon_clock(context, year, month, day, dow,
+				     hour, minute, second);
+	if (retval)
+		goto exit;
+
+	retval = count;
+exit:
+	mutex_unlock(&context->lock);
+
+	return retval;
+}
+
+
+static DEVICE_ATTR(imon_clock, S_IWUSR | S_IRUGO, show_imon_clock,
+		   store_imon_clock);
+
+static DEVICE_ATTR(associate_remote, S_IWUSR | S_IRUGO, show_associate_remote,
+		   store_associate_remote);
+
+static struct attribute *imon_display_sysfs_entries[] = {
+	&dev_attr_imon_clock.attr,
+	NULL
+};
+
+static struct attribute_group imon_display_attribute_group = {
+	.attrs = imon_display_sysfs_entries
+};
+
+static struct attribute *imon_rf_sysfs_entries[] = {
+	&dev_attr_associate_remote.attr,
+	NULL
+};
+
+static struct attribute_group imon_rf_attribute_group = {
+	.attrs = imon_rf_sysfs_entries
+};
+
+/**
+ * Writes data to the VFD.  The iMON VFD is 2x16 characters
+ * and requires data in 5 consecutive USB interrupt packets,
+ * each packet but the last carrying 7 bytes.
+ *
+ * I don't know if the VFD board supports features such as
+ * scrolling, clearing rows, blanking, etc. so at
+ * the caller must provide a full screen of data.  If fewer
+ * than 32 bytes are provided spaces will be appended to
+ * generate a full screen.
+ */
+static ssize_t vfd_write(struct file *file, const char *buf,
+			 size_t n_bytes, loff_t *pos)
+{
+	int i;
+	int offset;
+	int seq;
+	int retval = 0;
+	struct imon_context *context;
+	const unsigned char vfd_packet6[] = {
+		0x01, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF };
+
+	context = (struct imon_context *)file->private_data;
+	if (!context) {
+		err("%s: no context for device", __func__);
+		return -ENODEV;
+	}
+
+	mutex_lock(&context->lock);
+
+	if (!context->dev_present_intf0) {
+		err("%s: no iMON device present", __func__);
+		retval = -ENODEV;
+		goto exit;
+	}
+
+	if (n_bytes <= 0 || n_bytes > 32) {
+		err("%s: invalid payload size", __func__);
+		retval = -EINVAL;
+		goto exit;
+	}
+
+	if (copy_from_user(context->tx.data_buf, buf, n_bytes)) {
+		retval = -EFAULT;
+		goto exit;
+	}
+
+	/* Pad with spaces */
+	for (i = n_bytes; i < 32; ++i)
+		context->tx.data_buf[i] = ' ';
+
+	for (i = 32; i < 35; ++i)
+		context->tx.data_buf[i] = 0xFF;
+
+	offset = 0;
+	seq = 0;
+
+	do {
+		memcpy(context->usb_tx_buf, context->tx.data_buf + offset, 7);
+		context->usb_tx_buf[7] = (unsigned char) seq;
+
+		retval = send_packet(context);
+		if (retval) {
+			err("%s: send packet failed for packet #%d",
+					__func__, seq/2);
+			goto exit;
+		} else {
+			seq += 2;
+			offset += 7;
+		}
+
+	} while (offset < 35);
+
+	if (context->vfd_proto_6p) {
+		/* Send packet #6 */
+		memcpy(context->usb_tx_buf, &vfd_packet6, sizeof(vfd_packet6));
+		context->usb_tx_buf[7] = (unsigned char) seq;
+		retval = send_packet(context);
+		if (retval)
+			err("%s: send packet failed for packet #%d",
+					__func__, seq/2);
+	}
+
+exit:
+	mutex_unlock(&context->lock);
+
+	return (!retval) ? n_bytes : retval;
+}
+
+/**
+ * Writes data to the LCD.  The iMON OEM LCD screen excepts 8-byte
+ * packets. We accept data as 16 hexadecimal digits, followed by a
+ * newline (to make it easy to drive the device from a command-line
+ * -- even though the actual binary data is a bit complicated).
+ *
+ * The device itself is not a "traditional" text-mode display. It's
+ * actually a 16x96 pixel bitmap display. That means if you want to
+ * display text, you've got to have your own "font" and translate the
+ * text into bitmaps for display. This is really flexible (you can
+ * display whatever diacritics you need, and so on), but it's also
+ * a lot more complicated than most LCDs...
+ */
+static ssize_t lcd_write(struct file *file, const char *buf,
+			 size_t n_bytes, loff_t *pos)
+{
+	int retval = 0;
+	struct imon_context *context;
+
+	context = (struct imon_context *)file->private_data;
+	if (!context) {
+		err("%s: no context for device", __func__);
+		return -ENODEV;
+	}
+
+	mutex_lock(&context->lock);
+
+	if (!context->display_supported) {
+		err("%s: no iMON display present", __func__);
+		retval = -ENODEV;
+		goto exit;
+	}
+
+	if (n_bytes != 8) {
+		err("%s: invalid payload size: %d (expecting 8)",
+		    __func__, (int) n_bytes);
+		retval = -EINVAL;
+		goto exit;
+	}
+
+	if (copy_from_user(context->usb_tx_buf, buf, 8)) {
+		retval = -EFAULT;
+		goto exit;
+	}
+
+	retval = send_packet(context);
+	if (retval) {
+		err("%s: send packet failed!", __func__);
+		goto exit;
+	} else {
+		dev_dbg(context->driver->dev, "%s: write %d bytes to LCD\n",
+			__func__, (int) n_bytes);
+	}
+exit:
+	mutex_unlock(&context->lock);
+	return (!retval) ? n_bytes : retval;
+}
+
+/**
+ * Callback function for USB core API: transmit data
+ */
+static void usb_tx_callback(struct urb *urb)
+{
+	struct imon_context *context;
+
+	if (!urb)
+		return;
+	context = (struct imon_context *)urb->context;
+	if (!context)
+		return;
+
+	context->tx.status = urb->status;
+
+	/* notify waiters that write has finished */
+	atomic_set(&context->tx.busy, 0);
+	complete(&context->tx.finished);
+
+	return;
+}
+
+/**
+ * iMON IR receivers support two different signal sets -- those used by
+ * the iMON remotes, and those used by the Windows MCE remotes (which is
+ * really just RC-6), but only one or the other at a time, as the signals
+ * are decoded onboard the receiver.
+ */
+static void imon_set_ir_protocol(struct imon_context *context)
+{
+	int retval;
+	struct device *dev = context->driver->dev;
+	unsigned char ir_proto_packet[] =
+		{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x86 };
+
+	switch (ir_protocol) {
+	case IMON_IR_PROTOCOL_MCE:
+		/* MCE proto not supported on devices without tx control */
+		if (!context->tx_control) {
+			dev_info(dev, "%s: MCE IR proto not supported on this "
+				 "device, using iMON protocol\n", __func__);
+			context->ir_protocol = IMON_IR_PROTOCOL_IMON;
+			return;
+		}
+		dev_dbg(dev, "Configuring IR receiver for MCE protocol\n");
+		ir_proto_packet[0] = 0x01;
+		context->ir_protocol = IMON_IR_PROTOCOL_MCE;
+		break;
+	case IMON_IR_PROTOCOL_IMON:
+		dev_dbg(dev, "Configuring IR receiver for iMON protocol\n");
+		/* ir_proto_packet[0] = 0x00; // already the default */
+		context->ir_protocol = IMON_IR_PROTOCOL_IMON;
+		break;
+	case IMON_IR_PROTOCOL_IMON_NOPAD:
+		dev_dbg(dev, "Configuring IR receiver for iMON protocol "
+			"without PAD stabilize function enabled\n");
+		/* ir_proto_packet[0] = 0x00; // already the default */
+		context->ir_protocol = IMON_IR_PROTOCOL_IMON_NOPAD;
+		break;
+	default:
+		dev_info(dev, "%s: unknown IR protocol specified, will "
+			 "just default to iMON protocol\n", __func__);
+		context->ir_protocol = IMON_IR_PROTOCOL_IMON;
+		break;
+	}
+
+	/* Don't send config packet on devices w/o tx ctrl ep */
+	if (!context->tx_control)
+		return;
+
+	memcpy(context->usb_tx_buf, &ir_proto_packet, sizeof(ir_proto_packet));
+	retval = send_packet(context);
+	if (retval)
+		dev_info(dev, "%s: failed to set remote type\n", __func__);
+}
+
+
+/**
+ * Called by lirc_dev when the application opens /dev/lirc
+ */
+static int ir_open(void *data)
+{
+	int retval = 0;
+	struct imon_context *context;
+
+	/* prevent races with disconnect */
+	mutex_lock(&driver_lock);
+
+	context = (struct imon_context *)data;
+
+	/* initial IR protocol decode variables */
+	context->rx.count = 0;
+	context->rx.initial_space = 1;
+	context->rx.prev_bit = 0;
+
+	/* set new IR protocol if it has changed since init or last open */
+	if (ir_protocol != context->ir_protocol) {
+		mutex_lock(&context->lock);
+		imon_set_ir_protocol(context);
+		mutex_unlock(&context->lock);
+	}
+
+	context->ir_isopen = 1;
+	dev_info(context->driver->dev, "IR port opened\n");
+
+	mutex_unlock(&driver_lock);
+	return retval;
+}
+
+/**
+ * Called by lirc_dev when the application closes /dev/lirc
+ */
+static void ir_close(void *data)
+{
+	struct imon_context *context;
+
+	context = (struct imon_context *)data;
+	if (!context) {
+		err("%s: no context for device", __func__);
+		return;
+	}
+
+	mutex_lock(&context->lock);
+
+	context->ir_isopen = 0;
+	context->ir_isassociating = 0;
+	dev_info(context->driver->dev, "IR port closed\n");
+
+	if (!context->dev_present_intf0) {
+		/*
+		 * Device disconnected while IR port was still open. Driver
+		 * was not deregistered at disconnect time, so do it now.
+		 */
+		deregister_from_lirc(context);
+
+		if (!context->display_isopen) {
+			mutex_unlock(&context->lock);
+			free_imon_context(context);
+			return;
+		}
+		/*
+		 * If display port is open, context will be deleted by
+		 * display_close
+		 */
+	}
+
+	mutex_unlock(&context->lock);
+	return;
+}
+
+/**
+ * Convert bit count to time duration (in us) and submit
+ * the value to lirc_dev.
+ */
+static void submit_data(struct imon_context *context)
+{
+	unsigned char buf[4];
+	int value = context->rx.count;
+	int i;
+
+	dev_dbg(context->driver->dev, "submitting data to LIRC\n");
+
+	value *= BIT_DURATION;
+	value &= PULSE_MASK;
+	if (context->rx.prev_bit)
+		value |= PULSE_BIT;
+
+	for (i = 0; i < 4; ++i)
+		buf[i] = value>>(i*8);
+
+	lirc_buffer_write(context->driver->rbuf, buf);
+	wake_up(&context->driver->rbuf->wait_poll);
+	return;
+}
+
+static inline int tv2int(const struct timeval *a, const struct timeval *b)
+{
+	int usecs = 0;
+	int sec   = 0;
+
+	if (b->tv_usec > a->tv_usec) {
+		usecs = 1000000;
+		sec--;
+	}
+
+	usecs += a->tv_usec - b->tv_usec;
+
+	sec += a->tv_sec - b->tv_sec;
+	sec *= 1000;
+	usecs /= 1000;
+	sec += usecs;
+
+	if (sec < 0)
+		sec = 1000;
+
+	return sec;
+}
+
+/**
+ * The directional pad behaves a bit differently, depending on whether this is
+ * one of the older ffdc devices or a newer device. Newer devices appear to
+ * have a higher resolution matrix for more precise mouse movement, but it
+ * makes things overly sensitive in keyboard mode, so we do some interesting
+ * contortions to make it less touchy. Older devices run through the same
+ * routine with shorter timeout and a smaller threshold.
+ */
+static int stabilize(int a, int b, u16 timeout, u16 threshold)
+{
+	struct timeval ct;
+	static struct timeval prev_time = {0, 0};
+	static struct timeval hit_time  = {0, 0};
+	static int x, y, prev_result, hits;
+	int result = 0;
+	int msec, msec_hit;
+
+	do_gettimeofday(&ct);
+	msec = tv2int(&ct, &prev_time);
+	msec_hit = tv2int(&ct, &hit_time);
+
+	if (msec > 100) {
+		x = 0;
+		y = 0;
+		hits = 0;
+	}
+
+	x += a;
+	y += b;
+
+	prev_time = ct;
+
+	if (abs(x) > threshold || abs(y) > threshold) {
+		if (abs(y) > abs(x))
+			result = (y > 0) ? 0x7F : 0x80;
+		else
+			result = (x > 0) ? 0x7F00 : 0x8000;
+
+		x = 0;
+		y = 0;
+
+		if (result == prev_result) {
+			hits++;
+
+			if (hits > 3) {
+				switch (result) {
+				case 0x7F:
+					y = 17 * threshold / 30;
+					break;
+				case 0x80:
+					y -= 17 * threshold / 30;
+					break;
+				case 0x7F00:
+					x = 17 * threshold / 30;
+					break;
+				case 0x8000:
+					x -= 17 * threshold / 30;
+					break;
+				}
+			}
+
+			if (hits == 2 && msec_hit < timeout) {
+				result = 0;
+				hits = 1;
+			}
+		} else {
+			prev_result = result;
+			hits = 1;
+			hit_time = ct;
+		}
+	}
+
+	return result;
+}
+
+static int imon_remote_key_lookup(u32 hw_code)
+{
+	int i;
+	u32 code = be32_to_cpu(hw_code);
+
+	/* Look for the initial press of a button */
+	for (i = 0; i < ARRAY_SIZE(imon_remote_key_table); i++)
+		if (imon_remote_key_table[i].hw_code == code)
+			return i;
+
+	/* Look for the release of a button */
+	for (i = 0; i < ARRAY_SIZE(imon_remote_key_table); i++)
+		if ((imon_remote_key_table[i].hw_code | 0x4000) == code)
+			return i;
+
+	return -1;
+}
+
+static int imon_mce_key_lookup(u32 hw_code)
+{
+	int i;
+	u32 code = be32_to_cpu(hw_code);
+
+	for (i = 0; i < ARRAY_SIZE(imon_mce_key_table); i++)
+		if (imon_mce_key_table[i].hw_code == code)
+			return i;
+
+	for (i = 0; i < ARRAY_SIZE(imon_mce_key_table); i++)
+		if (imon_mce_key_table[i].hw_code == (code | 0x8000))
+			return i;
+
+	return -1;
+}
+
+static int imon_panel_key_lookup(u64 hw_code)
+{
+	int i;
+	u64 code = be64_to_cpu(hw_code);
+
+	for (i = 0; i < ARRAY_SIZE(imon_panel_key_table); i++)
+		if (imon_panel_key_table[i].hw_code == (code | 0xfee))
+			return i;
+
+	return -1;
+}
+
+/**
+ * Process the incoming packet
+ */
+static void imon_incoming_packet(struct imon_context *context,
+				 struct urb *urb, int intf)
+{
+	int len = urb->actual_length;
+	unsigned char *buf = urb->transfer_buffer;
+	struct device *dev = context->driver->dev;
+	char rel_x = 0x00, rel_y = 0x00;
+	int octet, bit;
+	unsigned char mask;
+	int i, chunk_num;
+	int ts_input = 0;
+	int dir = 0;
+	u16 timeout, threshold;
+	u16 keycode;
+	u16 norelease = 0;
+	int k;
+	u32 remote_key = 0;
+	u64 panel_key = 0;
+	int mouse_input;
+	int right_shift = 1;
+	struct input_dev *idev = NULL;
+	struct input_dev *touch = NULL;
+
+	idev = context->idev;
+	if (context->display_type == IMON_DISPLAY_TYPE_VGA)
+		touch = context->touch;
+
+	/* Figure out what key was pressed */
+	if (len == 8 && buf[7] == 0xee) {
+		memcpy(&panel_key, buf, len);
+		k = imon_panel_key_lookup(panel_key);
+		keycode = imon_panel_key_table[k].keycode;
+	} else {
+		memcpy(&remote_key, buf, sizeof(remote_key));
+		if (context->ir_protocol == IMON_IR_PROTOCOL_MCE) {
+			k = imon_mce_key_lookup(remote_key);
+			keycode = imon_mce_key_table[k].keycode;
+		} else {
+			k = imon_remote_key_lookup(remote_key);
+			keycode = imon_remote_key_table[k].keycode;
+		}
+	}
+
+	/* keyboard/mouse mode toggle button */
+	if (keycode == KEY_KEYBOARD && (buf[2] & 0x40) != 0x40) {
+		if (!nomouse) {
+			context->pad_mouse = ~(context->pad_mouse) & 0x1;
+			dev_dbg(dev, "toggling to %s mode\n",
+				context->pad_mouse ? "mouse" : "keyboard");
+		} else {
+			context->pad_mouse = 0;
+			dev_dbg(dev, "mouse mode was disabled by modparam\n");
+		}
+		context->last_keycode = keycode;
+		return;
+	}
+
+	/* send touchscreen events through input subsystem if touchpad data */
+	if (context->display_type == IMON_DISPLAY_TYPE_VGA && len == 8 &&
+	    buf[7] == 0x86) {
+		if (touch == NULL) {
+			dev_warn(dev, "%s: touchscreen input device is "
+				 "NULL!\n", __func__);
+			return;
+		}
+		mod_timer(&context->timer, jiffies + TOUCH_TIMEOUT);
+		context->touch_x = (buf[0] << 4) | (buf[1] >> 4);
+		context->touch_y = 0xfff - ((buf[2] << 4) | (buf[1] & 0xf));
+		input_report_abs(touch, ABS_X, context->touch_x);
+		input_report_abs(touch, ABS_Y, context->touch_y);
+		input_report_key(touch, BTN_TOUCH, 0x01);
+		input_sync(touch);
+		ts_input = 1;
+
+	/* send mouse events through input subsystem in mouse mode */
+	} else if (context->pad_mouse || (!context->ir_isopen && lirc_mode)) {
+		/* newer iMON device PAD or mouse button */
+		if (!context->ffdc_dev && (buf[0] & 0x01) && len == 5) {
+			mouse_input = 1;
+			rel_x = buf[2];
+			rel_y = buf[3];
+			right_shift = 1;
+		/* 0xffdc iMON PAD or mouse button input */
+		} else if (context->ffdc_dev && (buf[0] & 0x40) &&
+			   !((buf[1] & 0x01) || ((buf[1] >> 2) & 0x01))) {
+			mouse_input = 1;
+			rel_x = (buf[1] & 0x08) | (buf[1] & 0x10) >> 2 |
+				(buf[1] & 0x20) >> 4 | (buf[1] & 0x40) >> 6;
+			if (buf[0] & 0x02)
+				rel_x |= ~0x0f;
+			rel_x = rel_x + rel_x / 2;
+			rel_y = (buf[2] & 0x08) | (buf[2] & 0x10) >> 2 |
+				(buf[2] & 0x20) >> 4 | (buf[2] & 0x40) >> 6;
+			if (buf[0] & 0x01)
+				rel_y |= ~0x0f;
+			rel_y = rel_y + rel_y / 2;
+			right_shift = 2;
+		/* some ffdc devices decode mouse buttons differently... */
+		} else if (context->ffdc_dev && (buf[0] == 0x68)) {
+			mouse_input = 1;
+			right_shift = 2;
+		/* ch+/- buttons, which we use for an emulated scroll wheel */
+		} else if (keycode == KEY_CHANNELUP &&
+			   (buf[2] & 0x40) != 0x40) {
+			mouse_input = 1;
+			dir = 1;
+		} else if (keycode == KEY_CHANNELDOWN &&
+			   (buf[2] & 0x40) != 0x40) {
+			mouse_input = 1;
+			dir = -1;
+		} else
+			mouse_input = 0;
+
+		if (mouse_input) {
+			if (idev == NULL) {
+				dev_warn(dev, "%s: idev input device "
+					 "is NULL!\n", __func__);
+				return;
+			}
+			dev_dbg(context->driver->dev,
+				"sending mouse data via input subsystem\n");
+
+			if (dir) {
+				input_report_rel(idev, REL_WHEEL, dir);
+			} else if (rel_x || rel_y) {
+				input_report_rel(idev, REL_X, rel_x);
+				input_report_rel(idev, REL_Y, rel_y);
+			} else {
+				input_report_key(idev, BTN_LEFT, buf[1] & 0x1);
+				input_report_key(idev, BTN_RIGHT,
+						 buf[1] >> right_shift & 0x1);
+			}
+			input_sync(idev);
+			context->last_keycode = keycode;
+			return;
+		}
+	}
+
+	/*
+	 * at this point, mouse and touchscreen input has been handled
+	 * handled, so if we're in lirc mode, bail out if no listening
+	 * IR client
+	 */
+	if (!context->ir_isopen && lirc_mode)
+		return;
+
+	/* Now for some special handling to convert pad input to arrow keys */
+	if ((len == 5) && (buf[0] == 0x01) && (buf[4] == 0x00)) {
+		/* first, pad to 8 bytes so it conforms with everything else */
+		buf[5] = buf[6] = buf[7] = 0;
+		len = 8;
+		timeout = 500;	/* in msecs */
+		/* (2*threshold) x (2*threshold) square */
+		threshold = pad_thresh ? pad_thresh : 28;
+		rel_x = buf[2];
+		rel_y = buf[3];
+
+		/*
+		 * the imon directional pad functions more like a touchpad.
+		 * Bytes 3 & 4 contain a position coordinate (x,y), with each
+		 * component ranging from -14 to 14. Since this doesn't
+		 * cooperate well with the way lirc works (it would appear to
+		 * lirc as more than 100 different buttons) we need to map it
+		 * to 4 discrete values. Also, when you get too close to
+		 * diagonals, it has a tendancy to jump back and forth, so lets
+		 * try to ignore when they get too close
+		 */
+		if (context->ir_protocol == IMON_IR_PROTOCOL_IMON) {
+			if ((buf[1] == 0) && ((rel_x != 0) || (rel_y != 0))) {
+				dir = stabilize((int)rel_x, (int)rel_y,
+						timeout, threshold);
+				if (!dir)
+					return;
+				buf[2] = dir & 0xFF;
+				buf[3] = (dir >> 8) & 0xFF;
+				memcpy(&remote_key, buf, sizeof(remote_key));
+				k = imon_remote_key_lookup(remote_key);
+				keycode = imon_remote_key_table[k].keycode;
+			}
+		} else {
+			if (abs(rel_y) > abs(rel_x)) {
+				buf[2] = (rel_y > 0) ? 0x7F : 0x80;
+				buf[3] = 0;
+				keycode = (rel_y > 0) ? KEY_DOWN : KEY_UP;
+			} else {
+				buf[2] = 0;
+				buf[3] = (rel_x > 0) ? 0x7F : 0x80;
+				keycode = (rel_x > 0) ? KEY_RIGHT : KEY_LEFT;
+			}
+		}
+		norelease = 1;
+
+	} else if ((len == 8) && (buf[0] & 0x40) &&
+		   !(buf[1] & 0x01 || buf[1] >> 2 & 0x01)) {
+		/*
+		 * Handle on-board decoded pad events for e.g. older
+		 * VFD/iMON-Pad (15c2:ffdc). The remote generates various codes
+		 * from 0x68nnnnB7 to 0x6AnnnnB7, the left mouse button
+		 * generates 0x688301b7 and the right one 0x688481b7. All other
+		 * keys generate 0x2nnnnnnn. Length has been padded to 8
+		 * already, position coordinate is encoded in buf[1] and buf[2]
+		 * with reversed endianess. Extract direction from buffer,
+		 * rotate endianess, adjust sign and feed the values into
+		 * stabilize(). The resulting codes will be 0x01008000,
+		 * 0x01007F00, ..., so one can use the normal imon-pad config
+		 * from the remotes dir.
+		 */
+		timeout = 10;	/* in msecs */
+		/* (2*threshold) x (2*threshold) square */
+		threshold = pad_thresh ? pad_thresh : 15;
+
+		/* buf[1] is x */
+		rel_x = (buf[1] & 0x08) | (buf[1] & 0x10) >> 2 |
+			(buf[1] & 0x20) >> 4 | (buf[1] & 0x40) >> 6;
+		if (buf[0] & 0x02)
+			rel_x |= ~0x10+1;
+		/* buf[2] is y */
+		rel_y = (buf[2] & 0x08) | (buf[2] & 0x10) >> 2 |
+			(buf[2] & 0x20) >> 4 | (buf[2] & 0x40) >> 6;
+		if (buf[0] & 0x01)
+			rel_y |= ~0x10+1;
+
+		buf[0] = 0x01;
+		buf[1] = buf[4] = buf[5] = buf[6] = buf[7] = 0;
+
+		if (context->ir_protocol == IMON_IR_PROTOCOL_IMON) {
+			dir = stabilize((int)rel_x, (int)rel_y,
+					timeout, threshold);
+			if (!dir)
+				return;
+			buf[2] = dir & 0xFF;
+			buf[3] = (dir >> 8) & 0xFF;
+		} else {
+			if (abs(rel_y) > abs(rel_x)) {
+				buf[2] = (rel_y > 0) ? 0x7F : 0x80;
+				buf[3] = 0;
+				keycode = (rel_y > 0) ? KEY_DOWN : KEY_UP;
+			} else {
+				buf[2] = 0;
+				buf[3] = (rel_x > 0) ? 0x7F : 0x80;
+				keycode = (rel_x > 0) ? KEY_RIGHT : KEY_LEFT;
+			}
+		}
+		norelease = 1;
+
+	} else if (ts_input) {
+		/*
+		 * this is touchscreen input, which we need to down-sample
+		 * to a 64 button matrix at the moment...
+		 */
+		buf[0] = buf[0] >> 5;
+		buf[1] = 0x00;
+		buf[2] = buf[2] >> 5;
+		buf[3] = 0x00;
+		buf[4] = 0x00;
+		buf[5] = 0x00;
+		buf[6] = 0x14;
+		buf[7] = 0xff;
+	}
+
+	if (!lirc_mode && context->ir_onboard_decode) {
+		int press_type = 0;
+		static int seen_first;
+		int msec;
+		struct timeval t;
+		static struct timeval prev_time = { 0, 0 };
+		if (debug) {
+			printk(KERN_INFO "intf%d decoded packet: ", intf);
+			for (i = 0; i < len; ++i)
+				printk("%02x ", buf[i]);
+			printk("\n");
+		}
+
+		/* key release of 0x02XXXXXX key */
+		if (k == -1 && buf[0] == 0x02 && buf[3] == 0x00)
+			keycode = context->last_keycode;
+
+		/* initial mce button press */
+		else if (ir_protocol == IMON_IR_PROTOCOL_MCE && buf[0] == 0x80
+			 && buf[2] != context->last_mce_byte)
+			goto input_out;
+
+		/* subsequent mce button press, on which we'll act */
+		else if (ir_protocol == IMON_IR_PROTOCOL_MCE && buf[0] == 0x80
+			 && seen_first) {
+			press_type = 1;
+			norelease = 1;
+
+		/* incoherent or irrelevant data */
+		} else if (k == -1)
+			return;
+
+		/* key release of 0xXXXXXXb7 key */
+		else if (buf[3] == 0xb7 && (buf[2] & 0x40) == 0x40)
+			press_type = 0;
+
+		/* this is a button press */
+		else
+			press_type = 1;
+
+		/* KEY_MUTE repeats need to be suppressed */
+		if (keycode == KEY_MUTE && context->last_keycode == KEY_MUTE) {
+			do_gettimeofday(&t);
+			msec = tv2int(&t, &prev_time);
+			prev_time = t;
+			if (msec < 500)
+				return;
+		}
+
+		input_report_key(idev, keycode, press_type);
+		input_sync(idev);
+
+		/* panel keys and some remote keys don't generate a release */
+		if (panel_key || norelease) {
+			input_report_key(idev, keycode, 0);
+			input_sync(idev);
+		}
+
+input_out:
+		context->last_keycode = keycode;
+		if (ir_protocol == IMON_IR_PROTOCOL_MCE && buf[0] == 0x80) {
+			seen_first = ~seen_first & 0x1;
+			context->last_mce_byte = buf[2];
+		}
+		return;
+	}
+
+	if (len != 8) {
+		dev_warn(dev, "imon %s: invalid incoming packet "
+			 "size (len = %d, intf%d)\n", __func__, len, intf);
+		return;
+	}
+
+	/* iMON 2.4G associate frame */
+	if (buf[0] == 0x00 &&
+	    buf[2] == 0xFF &&				/* REFID */
+	    buf[3] == 0xFF &&
+	    buf[4] == 0xFF &&
+	    buf[5] == 0xFF &&				/* iMON 2.4G */
+	   ((buf[6] == 0x4E && buf[7] == 0xDF) ||	/* LT */
+	    (buf[6] == 0x5E && buf[7] == 0xDF))) {	/* DT */
+		dev_warn(dev, "%s: remote associated refid=%02X\n",
+			 __func__, buf[1]);
+		context->ir_isassociating = 0;
+	}
+
+	chunk_num = buf[7];
+
+	if (chunk_num == 0xFF && !ts_input)
+		return;		/* filler frame, no data here */
+
+	if (buf[0] == 0xFF &&
+	    buf[1] == 0xFF &&
+	    buf[2] == 0xFF &&
+	    buf[3] == 0xFF &&
+	    buf[4] == 0xFF &&
+	    buf[5] == 0xFF &&				/* iMON 2.4G */
+	    ((buf[6] == 0x4E && buf[7] == 0xAF) ||	/* LT */
+	     (buf[6] == 0x5E && buf[7] == 0xAF)))	/* DT */
+		return;		/* filler frame, no data here */
+
+	if (debug) {
+		if (context->ir_onboard_decode)
+			printk(KERN_INFO "intf%d decoded packet: ", intf);
+		else
+			printk(KERN_INFO "raw packet: ");
+		for (i = 0; i < len; ++i)
+			printk("%02x ", buf[i]);
+		printk("\n");
+	}
+
+	if (context->ir_onboard_decode) {
+		/* The signals have been decoded onboard the iMON controller */
+		lirc_buffer_write(context->driver->rbuf, buf);
+		wake_up(&context->driver->rbuf->wait_poll);
+		return;
+	}
+
+	/*
+	 * Translate received data to pulse and space lengths.
+	 * Received data is active low, i.e. pulses are 0 and
+	 * spaces are 1.
+	 *
+	 * My original algorithm was essentially similar to
+	 * Changwoo Ryu's with the exception that he switched
+	 * the incoming bits to active high and also fed an
+	 * initial space to LIRC at the start of a new sequence
+	 * if the previous bit was a pulse.
+	 *
+	 * I've decided to adopt his algorithm.
+	 */
+
+	if (chunk_num == 1 && context->rx.initial_space) {
+		/* LIRC requires a leading space */
+		context->rx.prev_bit = 0;
+		context->rx.count = 4;
+		submit_data(context);
+		context->rx.count = 0;
+	}
+
+	for (octet = 0; octet < 5; ++octet) {
+		mask = 0x80;
+		for (bit = 0; bit < 8; ++bit) {
+			int curr_bit = !(buf[octet] & mask);
+			if (curr_bit != context->rx.prev_bit) {
+				if (context->rx.count) {
+					submit_data(context);
+					context->rx.count = 0;
+				}
+				context->rx.prev_bit = curr_bit;
+			}
+			++context->rx.count;
+			mask >>= 1;
+		}
+	}
+
+	if (chunk_num == 10) {
+		if (context->rx.count) {
+			submit_data(context);
+			context->rx.count = 0;
+		}
+		context->rx.initial_space = context->rx.prev_bit;
+	}
+}
+
+/**
+ * report touchscreen input
+ */
+static void imon_touch_display_timeout(unsigned long data)
+{
+	struct imon_context *context = (struct imon_context *)data;
+	struct input_dev *touch;
+
+	if (!context->display_type == IMON_DISPLAY_TYPE_VGA)
+		return;
+
+	touch = context->touch;
+	input_report_abs(touch, ABS_X, context->touch_x);
+	input_report_abs(touch, ABS_Y, context->touch_y);
+	input_report_key(touch, BTN_TOUCH, 0x00);
+	input_sync(touch);
+
+	return;
+}
+
+/**
+ * Callback function for USB core API: receive data
+ */
+static void usb_rx_callback_intf0(struct urb *urb)
+{
+	struct imon_context *context;
+	unsigned char *buf;
+	int len;
+	int intfnum = 0;
+
+	if (!urb)
+		return;
+
+	context = (struct imon_context *)urb->context;
+	if (!context)
+		return;
+
+	buf = urb->transfer_buffer;
+	len = urb->actual_length;
+
+	switch (urb->status) {
+	case -ENOENT:		/* usbcore unlink successful! */
+		return;
+
+	case 0:
+		imon_incoming_packet(context, urb, intfnum);
+		break;
+
+	default:
+		dev_warn(context->driver->dev, "imon %s: status(%d): ignored\n",
+			 __func__, urb->status);
+		break;
+	}
+
+	usb_submit_urb(context->rx_urb_intf0, GFP_ATOMIC);
+
+	return;
+}
+
+static void usb_rx_callback_intf1(struct urb *urb)
+{
+	struct imon_context *context;
+	unsigned char *buf;
+	int len;
+	int intfnum = 1;
+
+	if (!urb)
+		return;
+
+	context = (struct imon_context *)urb->context;
+	if (!context)
+		return;
+
+	buf = urb->transfer_buffer;
+	len = urb->actual_length;
+
+	switch (urb->status) {
+	case -ENOENT:		/* usbcore unlink successful! */
+		return;
+
+	case 0:
+		imon_incoming_packet(context, urb, intfnum);
+		break;
+
+	default:
+		dev_warn(context->driver->dev, "imon %s: status(%d): ignored\n",
+			 __func__, urb->status);
+		break;
+	}
+
+	usb_submit_urb(context->rx_urb_intf1, GFP_ATOMIC);
+
+	return;
+}
+
+/**
+ * Callback function for USB core API: Probe
+ */
+static int imon_probe(struct usb_interface *interface,
+		      const struct usb_device_id *id)
+{
+	struct usb_device *usbdev = NULL;
+	struct usb_host_interface *iface_desc = NULL;
+	struct usb_endpoint_descriptor *rx_endpoint = NULL;
+	struct usb_endpoint_descriptor *tx_endpoint = NULL;
+	struct urb *rx_urb = NULL;
+	struct urb *tx_urb = NULL;
+	struct lirc_driver *driver = NULL;
+	struct lirc_buffer *rbuf = NULL;
+	struct usb_interface *first_if;
+	struct device *dev = &interface->dev;
+	int ifnum;
+	int lirc_minor = 0;
+	int num_endpts;
+	int retval = 0;
+	int display_ep_found = 0;
+	int ir_ep_found = 0;
+	int alloc_status = 0;
+	int vfd_proto_6p = 0;
+	int ir_onboard_decode = 0;
+	int buf_chunk_size = BUF_CHUNK_SIZE;
+	int code_length;
+	int tx_control = 0;
+	struct imon_context *context = NULL;
+	struct imon_context *first_if_context = NULL;
+	int i, sysfs_err;
+	int configured_display_type = IMON_DISPLAY_TYPE_VFD;
+	u16 vendor, product;
+	const unsigned char fp_packet[] = { 0x40, 0x00, 0x00, 0x00,
+					    0x00, 0x00, 0x00, 0x88 };
+
+	/*
+	 * Try to auto-detect the type of display if the user hasn't set
+	 * it by hand via the display_type modparam. Default is VFD.
+	 */
+	if (display_type == IMON_DISPLAY_TYPE_AUTO) {
+		if (usb_match_id(interface, lcd_device_list))
+			configured_display_type = IMON_DISPLAY_TYPE_LCD;
+		else if (usb_match_id(interface, imon_touchscreen_list))
+			configured_display_type = IMON_DISPLAY_TYPE_VGA;
+		else if (usb_match_id(interface, ir_only_list))
+			configured_display_type = IMON_DISPLAY_TYPE_NONE;
+		else
+			configured_display_type = IMON_DISPLAY_TYPE_VFD;
+	} else {
+		configured_display_type = display_type;
+		dev_dbg(dev, "%s: overriding display type to %d via "
+			"modparam\n", __func__, display_type);
+	}
+
+	/*
+	 * If it's the LCD, as opposed to the VFD, we just need to replace
+	 * the "write" file op.
+	 */
+	if (configured_display_type == IMON_DISPLAY_TYPE_LCD)
+		display_fops.write = &lcd_write;
+
+	/*
+	 * To get front panel buttons working properly for newer LCD devices,
+	 * we really do need a larger buffer.
+	 */
+	if (usb_match_id(interface, large_buffer_list))
+		buf_chunk_size = 2 * BUF_CHUNK_SIZE;
+
+	code_length = buf_chunk_size * 8;
+
+	usbdev     = usb_get_dev(interface_to_usbdev(interface));
+	iface_desc = interface->cur_altsetting;
+	num_endpts = iface_desc->desc.bNumEndpoints;
+	ifnum      = iface_desc->desc.bInterfaceNumber;
+	vendor     = le16_to_cpu(usbdev->descriptor.idVendor);
+	product    = le16_to_cpu(usbdev->descriptor.idProduct);
+
+	dev_dbg(dev, "%s: found iMON device (%04x:%04x, intf%d)\n",
+		__func__, vendor, product, ifnum);
+
+	/* prevent races probing devices w/multiple interfaces */
+	mutex_lock(&driver_lock);
+
+	first_if = usb_ifnum_to_if(usbdev, 0);
+	first_if_context = (struct imon_context *)usb_get_intfdata(first_if);
+
+	/*
+	 * Scan the endpoint list and set:
+	 *	first input endpoint = IR endpoint
+	 *	first output endpoint = display endpoint
+	 */
+	for (i = 0; i < num_endpts && !(ir_ep_found && display_ep_found); ++i) {
+		struct usb_endpoint_descriptor *ep;
+		int ep_dir;
+		int ep_type;
+		ep = &iface_desc->endpoint[i].desc;
+		ep_dir = ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK;
+		ep_type = ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+
+		if (!ir_ep_found &&
+			ep_dir == USB_DIR_IN &&
+			ep_type == USB_ENDPOINT_XFER_INT) {
+
+			rx_endpoint = ep;
+			ir_ep_found = 1;
+			dev_dbg(dev, "%s: found IR endpoint\n", __func__);
+
+		} else if (!display_ep_found &&
+			   ep_dir == USB_DIR_OUT &&
+			   ep_type == USB_ENDPOINT_XFER_INT) {
+			tx_endpoint = ep;
+			display_ep_found = 1;
+			dev_dbg(dev, "%s: found display endpoint\n", __func__);
+		}
+	}
+
+	/*
+	 * If we didn't find a display endpoint, this is probably one of the
+	 * newer iMON devices that use control urb instead of interrupt
+	 */
+	if (!display_ep_found) {
+		if (usb_match_id(interface, ctl_ep_device_list)) {
+			tx_control = 1;
+			display_ep_found = 1;
+			dev_dbg(dev, "%s: device uses control endpoint, not "
+				"interface OUT endpoint\n", __func__);
+		}
+	}
+
+	/*
+	 * Some iMON receivers have no display. Unfortunately, it seems
+	 * that SoundGraph recycles device IDs between devices both with
+	 * and without... :\
+	 */
+	if (configured_display_type == IMON_DISPLAY_TYPE_NONE) {
+		display_ep_found = 0;
+		dev_dbg(dev, "%s: device has no display\n", __func__);
+	}
+
+	/*
+	 * iMON Touch devices have a VGA touchscreen, but no "display", as
+	 * that refers to e.g. /dev/lcd0 (a character device LCD or VFD).
+	 */
+	if (configured_display_type == IMON_DISPLAY_TYPE_VGA) {
+		display_ep_found = 0;
+		dev_dbg(dev, "%s: iMON Touch device found\n", __func__);
+	}
+
+	/* Input endpoint is mandatory */
+	if (!ir_ep_found) {
+		err("%s: no valid input (IR) endpoint found.", __func__);
+		retval = -ENODEV;
+		goto exit;
+	} else {
+		/* Determine if the IR signals are decoded onboard */
+		if (usb_match_id(interface, ir_onboard_decode_list))
+			ir_onboard_decode = 1;
+
+		dev_dbg(dev, "%s: ir_onboard_decode: %d\n",
+			__func__, ir_onboard_decode);
+	}
+
+	/* Determine if display requires 6 packets */
+	if (display_ep_found) {
+		if (usb_match_id(interface, vfd_proto_6p_list))
+			vfd_proto_6p = 1;
+
+		dev_dbg(dev, "%s: vfd_proto_6p: %d\n",
+			__func__, vfd_proto_6p);
+	}
+
+	if (ifnum == 0) {
+		context = kzalloc(sizeof(struct imon_context), GFP_KERNEL);
+		if (!context) {
+			err("%s: kzalloc failed for context", __func__);
+			alloc_status = 1;
+			goto alloc_status_switch;
+		}
+		driver = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL);
+		if (!driver) {
+			err("%s: kzalloc failed for lirc_driver", __func__);
+			alloc_status = 2;
+			goto alloc_status_switch;
+		}
+		rbuf = kmalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
+		if (!rbuf) {
+			err("%s: kmalloc failed for lirc_buffer", __func__);
+			alloc_status = 3;
+			goto alloc_status_switch;
+		}
+		if (lirc_buffer_init(rbuf, buf_chunk_size, BUF_SIZE)) {
+			err("%s: lirc_buffer_init failed", __func__);
+			alloc_status = 4;
+			goto alloc_status_switch;
+		}
+		rx_urb = usb_alloc_urb(0, GFP_KERNEL);
+		if (!rx_urb) {
+			err("%s: usb_alloc_urb failed for IR urb", __func__);
+			alloc_status = 5;
+			goto alloc_status_switch;
+		}
+		tx_urb = usb_alloc_urb(0, GFP_KERNEL);
+		if (!tx_urb) {
+			err("%s: usb_alloc_urb failed for display urb",
+			    __func__);
+			alloc_status = 6;
+			goto alloc_status_switch;
+		}
+
+		mutex_init(&context->lock);
+		context->vfd_proto_6p = vfd_proto_6p;
+		context->ir_onboard_decode = ir_onboard_decode;
+
+		strcpy(driver->name, MOD_NAME);
+		driver->minor = -1;
+		driver->code_length = ir_onboard_decode ?
+			code_length : sizeof(int) * 8;
+		driver->sample_rate = 0;
+		driver->features = (ir_onboard_decode) ?
+			LIRC_CAN_REC_LIRCCODE : LIRC_CAN_REC_MODE2;
+		driver->data = context;
+		driver->rbuf = rbuf;
+		driver->set_use_inc = ir_open;
+		driver->set_use_dec = ir_close;
+		driver->dev = &interface->dev;
+		driver->owner = THIS_MODULE;
+
+		mutex_lock(&context->lock);
+
+		context->driver = driver;
+		/* start out in keyboard mode */
+		context->pad_mouse = 0;
+
+		init_timer(&context->timer);
+		context->timer.data = (unsigned long)context;
+		context->timer.function = imon_touch_display_timeout;
+
+		lirc_minor = lirc_register_driver(driver);
+		if (lirc_minor < 0) {
+			err("%s: lirc_register_driver failed", __func__);
+			alloc_status = 7;
+			goto alloc_status_switch;
+		} else
+			dev_info(dev, "Registered iMON driver "
+				 "(lirc minor: %d)\n", lirc_minor);
+
+		/* Needed while unregistering! */
+		driver->minor = lirc_minor;
+
+	} else {
+	/* this is the secondary interface on the device */
+		if (first_if_context->driver) {
+			rx_urb = usb_alloc_urb(0, GFP_KERNEL);
+			if (!rx_urb) {
+				err("%s: usb_alloc_urb failed for IR urb",
+				    __func__);
+				alloc_status = 5;
+				goto alloc_status_switch;
+			}
+
+			context = first_if_context;
+		}
+		mutex_lock(&context->lock);
+	}
+
+	if (ifnum == 0) {
+		context->usbdev_intf0 = usbdev;
+		context->dev_present_intf0 = 1;
+		context->rx_endpoint_intf0 = rx_endpoint;
+		context->rx_urb_intf0 = rx_urb;
+
+		/*
+		 * tx is used to send characters to lcd/vfd, associate RF
+		 * remotes, set IR protocol, and maybe more...
+		 */
+		context->tx_endpoint = tx_endpoint;
+		context->tx_urb = tx_urb;
+		context->tx_control = tx_control;
+
+		if (display_ep_found)
+			context->display_supported = 1;
+
+		if (product == 0xffdc)
+			context->ffdc_dev = 1;
+
+		context->display_type = configured_display_type;
+
+		context->idev = input_allocate_device();
+		input_set_drvdata(context->idev, context);
+
+		snprintf(context->name_idev, sizeof(context->name_idev),
+			 "iMON IR Remote (%04x:%04x)", vendor, product);
+		context->idev->name = context->name_idev;
+
+		usb_make_path(usbdev, context->phys_idev,
+			      sizeof(context->phys_idev));
+		strlcat(context->phys_idev, "/input0",
+			sizeof(context->phys_idev));
+		context->idev->phys = context->phys_idev;
+
+		context->idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
+
+		context->idev->keybit[BIT_WORD(BTN_MOUSE)] =
+			BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT);
+		context->idev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y) |
+			BIT_MASK(REL_WHEEL);
+
+		/* register all the keys we support */
+		for (i = 0; i < ARRAY_SIZE(imon_remote_key_table); i++) {
+			u16 kc = imon_remote_key_table[i].keycode;
+			__set_bit(kc, context->idev->keybit);
+		}
+		for (i = 0; i < ARRAY_SIZE(imon_panel_key_table); i++) {
+			u16 kc = imon_panel_key_table[i].keycode;
+			__set_bit(kc, context->idev->keybit);
+		}
+		for (i = 0; i < ARRAY_SIZE(imon_mce_key_table); i++) {
+			u16 kc = imon_mce_key_table[i].keycode;
+			__set_bit(kc, context->idev->keybit);
+		}
+
+		usb_to_input_id(usbdev, &context->idev->id);
+		context->idev->dev.parent = &interface->dev;
+		retval = input_register_device(context->idev);
+		if (retval)
+			dev_info(dev, "%s: input device setup failed\n",
+				 __func__);
+
+		usb_fill_int_urb(context->rx_urb_intf0, context->usbdev_intf0,
+			usb_rcvintpipe(context->usbdev_intf0,
+				context->rx_endpoint_intf0->bEndpointAddress),
+			context->usb_rx_buf, sizeof(context->usb_rx_buf),
+			usb_rx_callback_intf0, context,
+			context->rx_endpoint_intf0->bInterval);
+
+		retval = usb_submit_urb(context->rx_urb_intf0, GFP_KERNEL);
+
+		if (retval) {
+			err("%s: usb_submit_urb failed for intf0 (%d)",
+			    __func__, retval);
+			mutex_unlock(&context->lock);
+			goto exit;
+		}
+
+	} else {
+		context->usbdev_intf1 = usbdev;
+		context->dev_present_intf1 = 1;
+		context->rx_endpoint_intf1 = rx_endpoint;
+		context->rx_urb_intf1 = rx_urb;
+
+		if (context->display_type == IMON_DISPLAY_TYPE_VGA) {
+			context->touch = input_allocate_device();
+
+			snprintf(context->name_touch,
+				 sizeof(context->name_touch),
+				 "iMON USB Touchscreen (%04x:%04x)",
+				 vendor, product);
+			context->touch->name = context->name_touch;
+
+			usb_make_path(usbdev, context->phys_touch,
+				      sizeof(context->phys_touch));
+			strlcat(context->phys_touch, "/input1",
+				sizeof(context->phys_touch));
+			context->touch->phys = context->phys_touch;
+
+			context->touch->evbit[0] =
+				BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+			context->touch->keybit[BIT_WORD(BTN_TOUCH)] =
+				BIT_MASK(BTN_TOUCH);
+			input_set_abs_params(context->touch, ABS_X,
+					     0x00, 0xfff, 0, 0);
+			input_set_abs_params(context->touch, ABS_Y,
+					     0x00, 0xfff, 0, 0);
+
+			input_set_drvdata(context->touch, context);
+
+			usb_to_input_id(usbdev, &context->touch->id);
+			context->touch->dev.parent = &interface->dev;
+			retval = input_register_device(context->touch);
+			if (retval)
+				dev_info(dev, "%s: touchscreen input device "
+					 "setup failed\n", __func__);
+		} else
+			context->touch = NULL;
+
+		usb_fill_int_urb(context->rx_urb_intf1, context->usbdev_intf1,
+			usb_rcvintpipe(context->usbdev_intf1,
+				context->rx_endpoint_intf1->bEndpointAddress),
+			context->usb_rx_buf, sizeof(context->usb_rx_buf),
+			usb_rx_callback_intf1, context,
+			context->rx_endpoint_intf1->bInterval);
+
+		retval = usb_submit_urb(context->rx_urb_intf1, GFP_KERNEL);
+
+		if (retval) {
+			err("%s: usb_submit_urb failed for intf1 (%d)",
+			    __func__, retval);
+			mutex_unlock(&context->lock);
+			goto exit;
+		}
+	}
+
+	usb_set_intfdata(interface, context);
+
+	/* RF products *also* use 0xffdc... sigh... */
+	if (context->ffdc_dev) {
+		sysfs_err = sysfs_create_group(&interface->dev.kobj,
+					       &imon_rf_attribute_group);
+		if (sysfs_err)
+			err("%s: Could not create RF sysfs entries(%d)",
+			    __func__, sysfs_err);
+	}
+
+	if (context->display_supported && ifnum == 0) {
+		dev_dbg(dev, "%s: Registering iMON display with sysfs\n",
+			__func__);
+
+		/* set up sysfs entry for built-in clock */
+		sysfs_err = sysfs_create_group(&interface->dev.kobj,
+					       &imon_display_attribute_group);
+		if (sysfs_err)
+			err("%s: Could not create display sysfs entries(%d)",
+			    __func__, sysfs_err);
+
+		if (usb_register_dev(interface, &imon_class)) {
+			/* Not a fatal error, so ignore */
+			dev_info(dev, "%s: could not get a minor number for "
+				 "display\n", __func__);
+		}
+
+		/* Enable front-panel buttons and/or knobs */
+		memcpy(context->usb_tx_buf, &fp_packet, sizeof(fp_packet));
+		retval = send_packet(context);
+		/* Not fatal, but warn about it */
+		if (retval)
+			dev_info(dev, "%s: failed to enable front-panel "
+				 "buttons and/or knobs\n", __func__);
+	}
+
+	/* set IR protocol/remote type */
+	imon_set_ir_protocol(context);
+
+	dev_info(dev, "iMON device (%04x:%04x, intf%d) on "
+		 "usb<%d:%d> initialized\n", vendor, product, ifnum,
+		 usbdev->bus->busnum, usbdev->devnum);
+
+alloc_status_switch:
+	mutex_unlock(&context->lock);
+
+	switch (alloc_status) {
+	case 7:
+		usb_free_urb(tx_urb);
+	case 6:
+		usb_free_urb(rx_urb);
+	case 5:
+		if (rbuf)
+			lirc_buffer_free(rbuf);
+	case 4:
+		kfree(rbuf);
+	case 3:
+		kfree(driver);
+	case 2:
+		kfree(context);
+		context = NULL;
+	case 1:
+		retval = -ENOMEM;
+		break;
+	case 0:
+		retval = 0;
+	}
+
+exit:
+	mutex_unlock(&driver_lock);
+
+	return retval;
+}
+
+/**
+ * Callback function for USB core API: disconnect
+ */
+static void imon_disconnect(struct usb_interface *interface)
+{
+	struct imon_context *context;
+	int ifnum;
+
+	/* prevent races with ir_open()/display_open() */
+	mutex_lock(&driver_lock);
+
+	context = usb_get_intfdata(interface);
+	ifnum = interface->cur_altsetting->desc.bInterfaceNumber;
+
+	mutex_lock(&context->lock);
+
+	/*
+	 * sysfs_remove_group is safe to call even if sysfs_create_group
+	 * hasn't been called
+	 */
+	sysfs_remove_group(&interface->dev.kobj,
+			   &imon_display_attribute_group);
+	sysfs_remove_group(&interface->dev.kobj,
+			   &imon_rf_attribute_group);
+
+	usb_set_intfdata(interface, NULL);
+
+	/* Abort ongoing write */
+	if (atomic_read(&context->tx.busy)) {
+		usb_kill_urb(context->tx_urb);
+		complete_all(&context->tx.finished);
+	}
+
+	if (ifnum == 0) {
+		context->dev_present_intf0 = 0;
+		usb_kill_urb(context->rx_urb_intf0);
+		input_unregister_device(context->idev);
+		if (context->display_supported)
+			usb_deregister_dev(interface, &imon_class);
+	} else {
+		context->dev_present_intf1 = 0;
+		usb_kill_urb(context->rx_urb_intf1);
+		if (context->display_type == IMON_DISPLAY_TYPE_VGA)
+			input_unregister_device(context->touch);
+	}
+
+	if (!context->ir_isopen && !context->dev_present_intf0 &&
+	    !context->dev_present_intf1) {
+		del_timer_sync(&context->timer);
+		deregister_from_lirc(context);
+		mutex_unlock(&context->lock);
+		if (!context->display_isopen)
+			free_imon_context(context);
+	} else
+		mutex_unlock(&context->lock);
+
+	mutex_unlock(&driver_lock);
+
+	printk(KERN_INFO "%s: iMON device (intf%d) disconnected\n",
+	       __func__, ifnum);
+}
+
+static int imon_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct imon_context *context = usb_get_intfdata(intf);
+	int ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
+
+	if (ifnum == 0)
+		usb_kill_urb(context->rx_urb_intf0);
+	else
+		usb_kill_urb(context->rx_urb_intf1);
+
+	return 0;
+}
+
+static int imon_resume(struct usb_interface *intf)
+{
+	int rc = 0;
+	struct imon_context *context = usb_get_intfdata(intf);
+	int ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
+
+	if (ifnum == 0) {
+		usb_fill_int_urb(context->rx_urb_intf0, context->usbdev_intf0,
+			usb_rcvintpipe(context->usbdev_intf0,
+				context->rx_endpoint_intf0->bEndpointAddress),
+			context->usb_rx_buf, sizeof(context->usb_rx_buf),
+			usb_rx_callback_intf0, context,
+			context->rx_endpoint_intf0->bInterval);
+
+		rc = usb_submit_urb(context->rx_urb_intf0, GFP_ATOMIC);
+
+	} else {
+		usb_fill_int_urb(context->rx_urb_intf1, context->usbdev_intf1,
+			usb_rcvintpipe(context->usbdev_intf1,
+				context->rx_endpoint_intf1->bEndpointAddress),
+			context->usb_rx_buf, sizeof(context->usb_rx_buf),
+			usb_rx_callback_intf1, context,
+			context->rx_endpoint_intf1->bInterval);
+
+		rc = usb_submit_urb(context->rx_urb_intf1, GFP_ATOMIC);
+	}
+
+	return rc;
+}
+
+static int __init imon_init(void)
+{
+	int rc;
+
+	printk(KERN_INFO MOD_NAME ": " MOD_DESC ", v" MOD_VERSION "\n");
+
+	rc = usb_register(&imon_driver);
+	if (rc) {
+		err("%s: usb register failed(%d)", __func__, rc);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static void __exit imon_exit(void)
+{
+	usb_deregister(&imon_driver);
+	printk(KERN_INFO MOD_NAME ": module removed. Goodbye!\n");
+}
+
+module_init(imon_init);
+module_exit(imon_exit);
Index: b/drivers/input/lirc/lirc_imon.h
===================================================================
--- /dev/null
+++ b/drivers/input/lirc/lirc_imon.h
@@ -0,0 +1,209 @@ 
+/*
+ *   lirc_imon.h:  LIRC/VFD/LCD driver for SoundGraph iMON IR/VFD/LCD
+ *		   including the iMON PAD model
+ *
+ *   Copyright(C) 2004  Venky Raju(dev@venky.ws)
+ *   Copyright(C) 2009  Jarod Wilson <jarod@wilsonet.com>
+ *
+ *   lirc_imon is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+static const struct {
+	u32 hw_code;
+	u16 keycode;
+} imon_remote_key_table[] = {
+	/* keys sorted mostly by frequency of use to optimize lookups */
+	{ 0x2a8195b7, KEY_REWIND },
+	{ 0x298315b7, KEY_REWIND },
+	{ 0x2b8115b7, KEY_FASTFORWARD },
+	{ 0x2b8315b7, KEY_FASTFORWARD },
+	{ 0x2b9115b7, KEY_PREVIOUS },
+	{ 0x298195b7, KEY_NEXT },
+
+	{ 0x2a8115b7, KEY_PLAY },
+	{ 0x2a8315b7, KEY_PLAY },
+	{ 0x2a9115b7, KEY_PAUSE },
+	{ 0x2b9715b7, KEY_STOP },
+	{ 0x298115b7, KEY_RECORD },
+
+	{ 0x01008000, KEY_UP },
+	{ 0x01007f00, KEY_DOWN },
+	{ 0x01000080, KEY_LEFT },
+	{ 0x0100007f, KEY_RIGHT },
+
+	{ 0x2aa515b7, KEY_UP },
+	{ 0x289515b7, KEY_DOWN },
+	{ 0x29a515b7, KEY_LEFT },
+	{ 0x2ba515b7, KEY_RIGHT },
+
+	{ 0x0200002c, KEY_SPACE }, /* Select/Space */
+	{ 0x02000028, KEY_ENTER },
+	{ 0x288195b7, KEY_EXIT },
+	{ 0x02000029, KEY_ESC },
+	{ 0x0200002a, KEY_BACKSPACE },
+
+	{ 0x2b9595b7, KEY_MUTE },
+	{ 0x28a395b7, KEY_VOLUMEUP },
+	{ 0x28a595b7, KEY_VOLUMEDOWN },
+	{ 0x289395b7, KEY_CHANNELUP },
+	{ 0x288795b7, KEY_CHANNELDOWN },
+
+	{ 0x0200001e, KEY_NUMERIC_1 },
+	{ 0x0200001f, KEY_NUMERIC_2 },
+	{ 0x02000020, KEY_NUMERIC_3 },
+	{ 0x02000021, KEY_NUMERIC_4 },
+	{ 0x02000022, KEY_NUMERIC_5 },
+	{ 0x02000023, KEY_NUMERIC_6 },
+	{ 0x02000024, KEY_NUMERIC_7 },
+	{ 0x02000025, KEY_NUMERIC_8 },
+	{ 0x02000026, KEY_NUMERIC_9 },
+	{ 0x02000027, KEY_NUMERIC_0 },
+
+	{ 0x02200025, KEY_NUMERIC_STAR },
+	{ 0x02200020, KEY_NUMERIC_POUND },
+
+	{ 0x2b8515b7, KEY_VIDEO },
+	{ 0x299195b7, KEY_AUDIO },
+	{ 0x2ba115b7, KEY_CAMERA },
+	{ 0x28a515b7, KEY_TV },
+	{ 0x29a395b7, KEY_DVD },
+	{ 0x29a295b7, KEY_DVD },
+
+	/* the Menu key between DVD and Subtitle on the RM-200... */
+	{ 0x2ba385b7, KEY_MENU },
+	{ 0x2ba395b7, KEY_MENU },
+
+	{ 0x288515b7, KEY_BOOKMARKS },
+	{ 0x2ab715b7, KEY_MEDIA }, /* Thumbnail */
+	{ 0x298595b7, KEY_SUBTITLE },
+	{ 0x2b8595b7, KEY_LANGUAGE },
+
+	{ 0x29a595b7, KEY_ZOOM },
+	{ 0x2aa395b7, KEY_SCREEN }, /* FullScreen */
+
+	{ 0x299115b7, KEY_KEYBOARD },
+	{ 0x299135b7, KEY_KEYBOARD },
+
+	{ 0x01010000, BTN_LEFT },
+	{ 0x01020000, BTN_RIGHT },
+	{ 0x01010080, BTN_LEFT },
+	{ 0x01020080, BTN_RIGHT },
+
+	{ 0x2a9395b7, KEY_CYCLEWINDOWS }, /* TaskSwitcher */
+	{ 0x2b8395b7, KEY_TIME }, /* Timer */
+
+	{ 0x289115b7, KEY_POWER },
+	{ 0x29b195b7, KEY_EJECTCD }, /* the one next to play */
+	{ 0x299395b7, KEY_EJECTCLOSECD }, /* eject (above TaskSwitcher) */
+
+	{ 0x02800000, KEY_MENU }, /* Left Menu */
+	{ 0x02000065, KEY_COMPOSE }, /* RightMenu */
+	{ 0x2ab195b7, KEY_PROG1 }, /* Go */
+	{ 0x29b715b7, KEY_DASHBOARD }, /* AppLauncher */
+};
+
+static const struct {
+	u32 hw_code;
+	u16 keycode;
+} imon_mce_key_table[] = {
+	/* keys sorted mostly by frequency of use to optimize lookups */
+	{ 0x800f8415, KEY_REWIND },
+	{ 0x800f8414, KEY_FASTFORWARD },
+	{ 0x800f841b, KEY_PREVIOUS },
+	{ 0x800f841a, KEY_NEXT },
+
+	{ 0x800f8416, KEY_PLAY },
+	{ 0x800f8418, KEY_PAUSE },
+	{ 0x800f8418, KEY_PAUSE },
+	{ 0x800f8419, KEY_STOP },
+	{ 0x800f8417, KEY_RECORD },
+
+	{ 0x02000052, KEY_UP },
+	{ 0x02000051, KEY_DOWN },
+	{ 0x02000050, KEY_LEFT },
+	{ 0x0200004f, KEY_RIGHT },
+
+	{ 0x02000028, KEY_ENTER },
+/* the OK and Enter buttons decode to the same value
+	{ 0x02000028, KEY_OK }, */
+	{ 0x0200002a, KEY_EXIT },
+	{ 0x02000029, KEY_DELETE },
+
+	{ 0x800f840e, KEY_MUTE },
+	{ 0x800f8410, KEY_VOLUMEUP },
+	{ 0x800f8411, KEY_VOLUMEDOWN },
+	{ 0x800f8412, KEY_CHANNELUP },
+	{ 0x800f8413, KEY_CHANNELDOWN },
+
+	{ 0x0200001e, KEY_NUMERIC_1 },
+	{ 0x0200001f, KEY_NUMERIC_2 },
+	{ 0x02000020, KEY_NUMERIC_3 },
+	{ 0x02000021, KEY_NUMERIC_4 },
+	{ 0x02000022, KEY_NUMERIC_5 },
+	{ 0x02000023, KEY_NUMERIC_6 },
+	{ 0x02000024, KEY_NUMERIC_7 },
+	{ 0x02000025, KEY_NUMERIC_8 },
+	{ 0x02000026, KEY_NUMERIC_9 },
+	{ 0x02000027, KEY_NUMERIC_0 },
+
+	{ 0x02200025, KEY_NUMERIC_STAR },
+	{ 0x02200020, KEY_NUMERIC_POUND },
+
+	{ 0x800f8446, KEY_TV },
+	{ 0x800f8447, KEY_AUDIO },
+	{ 0x800f8448, KEY_PVR }, /* RecordedTV */
+	{ 0x800f8449, KEY_CAMERA },
+	{ 0x800f844a, KEY_VIDEO },
+	{ 0x800f8424, KEY_DVD },
+	{ 0x800f8425, KEY_TUNER }, /* LiveTV */
+
+	{ 0x800f845b, KEY_RED },
+	{ 0x800f845c, KEY_GREEN },
+	{ 0x800f845d, KEY_YELLOW },
+	{ 0x800f845e, KEY_BLUE },
+
+	{ 0x800f840f, KEY_INFO },
+	{ 0x800f8426, KEY_EPG }, /* Guide */
+	{ 0x800f845a, KEY_SUBTITLE }, /* Caption */
+
+	{ 0x800f840c, KEY_POWER },
+	{ 0x800f840d, KEY_PROG1 }, /* Windows MCE button */
+
+};
+
+static const struct {
+	u64 hw_code;
+	u16 keycode;
+} imon_panel_key_table[] = {
+	{ 0x000000000f000fee, KEY_PROG1 }, /* Go */
+	{ 0x000000001f000fee, KEY_AUDIO },
+	{ 0x0000000020000fee, KEY_VIDEO },
+	{ 0x0000000021000fee, KEY_CAMERA },
+	{ 0x0000000027000fee, KEY_DVD },
+/* the TV key on my panel is broken, doesn't work under any OS
+	{ 0x0000000000000fee, KEY_TV }, */
+	{ 0x0000000005000fee, KEY_PREVIOUS },
+	{ 0x0000000007000fee, KEY_REWIND },
+	{ 0x0000000004000fee, KEY_STOP },
+	{ 0x000000003c000fee, KEY_PLAYPAUSE },
+	{ 0x0000000008000fee, KEY_FASTFORWARD },
+	{ 0x0000000006000fee, KEY_NEXT },
+	{ 0x0000000100000fee, KEY_RIGHT },
+	{ 0x0000010000000fee, KEY_LEFT },
+	{ 0x000000003d000fee, KEY_SELECT },
+	{ 0x0001000000000fee, KEY_VOLUMEUP },
+	{ 0x0100000000000fee, KEY_VOLUMEDOWN },
+	{ 0x0000000001000fee, KEY_MUTE },
+};