add support for IR on FlyDVB Trio (saa7134)

Commit Message

Lukáš Karas Nov. 5, 2009, 2:55 p.m. UTC

None

Patch

diff -uprN video.29e4ba1a09bc/ir-kbd-i2c.c video/ir-kbd-i2c.c
--- video.29e4ba1a09bc/ir-kbd-i2c.c	2009-09-19 14:45:22.000000000 +0200
+++ video/ir-kbd-i2c.c	2009-09-21 20:59:30.000000000 +0200
@@ -438,6 +441,7 @@  static int ir_probe(struct i2c_client *c
 		ir_type     = IR_TYPE_RC5;
 		ir_codes    = &ir_codes_fusionhdtv_mce_table;
 		break;
+	case 0x0b:
 	case 0x7a:
 	case 0x47:
 	case 0x71:
@@ -467,7 +471,7 @@  static int ir_probe(struct i2c_client *c
 		ir_codes    = &ir_codes_avermedia_cardbus_table;
 		break;
 	default:
-		dprintk(1, DEVNAME ": Unsupported i2c address 0x%02x\n", addr);
+		dprintk(1, ": Unsupported i2c address 0x%02x\n", addr);
 		err = -ENODEV;
 		goto err_out_free;
 	}
@@ -514,7 +518,7 @@  static int ir_probe(struct i2c_client *c

 	/* Make sure we are all setup before going on */
 	if (!name || !ir->get_key || !ir_codes) {
-		dprintk(1, DEVNAME ": Unsupported device at address 0x%02x\n",
+		dprintk(1,": Unsupported device at address 0x%02x\n",
 			addr);
 		err = -ENODEV;
 		goto err_out_free;
@@ -722,6 +726,30 @@  static int ir_probe(struct i2c_adapter *
 			ir_attach(adap, msg[0].addr, 0, 0);
 	}

+	/* special case for LifeView FlyDVB Trio */
+	if (adap->id == I2C_HW_SAA7134) {
+		u8 temp = 0;
+		msg.buf = &temp;
+		msg.addr = 0x0b;
+		msg.len = 1;
+		msg.flags = 0;
+
+		/* send weak up message to pic16C505 chip @ LifeView FlyDVB Trio */
+		if (1 != i2c_transfer(adap,&msg,1)) {
+			dprintk(1,"send wake up byte to pic16C505 failed\n");
+		}else{
+			msg.flags = I2C_M_RD;
+			rc = i2c_transfer(adap, &msg, 1);
+			dprintk(1, "probe 0x%02x @ %s: %s\n",
+					msg.addr, adap->name,
+					(1 == rc) ? "yes" : "no");
+			if (1 == rc)
+				ir_attach(adap, msg.addr, 0, 0);
+		}
+		msg.len = 0;
+		msg.flags = I2C_M_RD;
+	}
+
 	return 0;
 }
 #else
diff -uprN video.29e4ba1a09bc/saa7134/saa7134-cards.c video/saa7134/saa7134-cards.c
--- video.29e4ba1a09bc/saa7134/saa7134-cards.c	2009-09-19 14:45:22.000000000 +0200
+++ video/saa7134/saa7134-cards.c	2009-09-21 20:34:48.000000000 +0200
@@ -7239,9 +7239,27 @@  int saa7134_board_init2(struct saa7134_d
 	}
 	case SAA7134_BOARD_FLYDVB_TRIO:
 	{
+		u8 temp = 0;
+		int rc;
 		u8 data[] = { 0x3c, 0x33, 0x62};
 		struct i2c_msg msg = {.addr=0x09, .flags=0, .buf=data, .len = sizeof(data)};
 		i2c_transfer(&dev->i2c_adap, &msg, 1);
+
+		/* send weak up message to pic16C505 chip @ LifeView FlyDVB Trio */
+		msg.buf = &temp;
+		msg.addr = 0x0b;
+		msg.len = 1;
+		if (1 != i2c_transfer(&dev->i2c_adap,&msg,1)) {
+			printk(KERN_WARNING "%s: send wake up byte to pic16C505"
+					"(IR chip) failed\n", dev->name);
+		}else{
+			msg.flags = I2C_M_RD;
+			rc = i2c_transfer(&dev->i2c_adap, &msg, 1);
+			printk(KERN_INFO "%s: probe IR chip @ i2c 0x%02x: %s\n",
+				   dev->name, msg.addr,(1 == rc) ? "yes" : "no");
+			if (rc == 1)
+			   dev->has_remote = SAA7134_REMOTE_I2C;
+		}
 		break;
 	}
 	case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331:
diff -uprN video.29e4ba1a09bc/saa7134/saa7134-input.c video/saa7134/saa7134-input.c
--- video.29e4ba1a09bc/saa7134/saa7134-input.c	2009-09-19 14:45:22.000000000 +0200
+++ video/saa7134/saa7134-input.c	2009-09-21 20:35:39.000000000 +0200
@@ -132,6 +132,74 @@  static int build_key(struct saa7134_dev

 /* --------------------- Chip specific I2C key builders ----------------- */

+static int get_key_flydvb_trio(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
+{
+	int gpio;
+	int attempt = 0;
+	unsigned char b;
+
+	/* We need this to access GPI Used by the saa_readl macro. */
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30)
+	struct saa7134_dev *dev = ir->c.adapter->algo_data;
+#else
+	struct saa7134_dev *dev = ir->c->adapter->algo_data;
+#endif
+
+	if (dev == NULL) {
+		dprintk ("get_key_flydvb_trio: "
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30)
+		"gir->c.adapter->algo_data is NULL!\n");
+#else
+		"gir->c->adapter->algo_data is NULL!\n");
+#endif
+		return -EIO;
+	}
+
+	/* rising SAA7134_GPIGPRESCAN reads the status */
+	saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
+	saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
+
+	gpio = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2);
+
+	if (0x40000 &~ gpio)
+		return 0; /* No button press */
+
+	/* No button press - only before first key pressed */
+	if (b == 0xFF)
+		return 0;
+
+	/* poll IR chip */
+	/* weak up the IR chip */
+	b = 0;
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30)
+	while(1 != i2c_master_send(&ir->c, &b,1)) {
+#else
+	while(1 != i2c_master_send(ir->c, &b,1)) {
+#endif
+		if ((attempt++) < 10){
+			msleep(10); /* wait a bit for next attempt - I don't know
+			how make it better */
+			continue;
+		}
+		i2cdprintk("send wake up byte to pic16C505 (IR chip)"
+					"failed %dx\n", attempt);
+		return -EIO;
+	}
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30)
+	if (1 != i2c_master_recv(&ir->c, &b, 1)) {
+#else
+	if (1 != i2c_master_recv(ir->c, &b, 1)) {
+#endif
+		i2cdprintk("read error\n");
+		return -EIO;
+	}
+
+	*ir_key = b;
+	*ir_raw = b;
+	return 1;
+}
+
 static int get_key_msi_tvanywhere_plus(struct IR_i2c *ir, u32 *ir_key,
 				       u32 *ir_raw)
 {
@@ -878,6 +946,18 @@  void saa7134_probe_i2c_ir(struct saa7134
 		dev->info.addr = 0x40;
 #endif
 		break;
+	case SAA7134_BOARD_FLYDVB_TRIO:
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30)
+		snprintf(ir->c.name, sizeof(ir->c.name), "FlyDVB Trio");
+		ir->get_key   = get_key_flydvb_trio;
+		ir->ir_codes  = ir_codes_flydvb_table;
+#else
+		dev->init_data.name = "FlyDVB Trio";
+		dev->init_data.get_key = get_key_flydvb_trio;
+		dev->init_data.ir_codes = &ir_codes_flydvb_table;
+		dev->info.addr = 0x0b;
+#endif
+	break;
 	}

 #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 30)