@@ -513,6 +513,8 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd,
struct input_absinfo abs;
struct ff_effect effect;
int __user *ip = (int __user *)p;
+ struct keycode_table_entry kt, *kt_p = p;
+ char scancode[16];
int i, t, u, v;
int error;
@@ -567,6 +569,43 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd,
return input_set_keycode(dev, t, v);
+ case EVIOCGKEYCODEBIG:
+ if (copy_from_user(&kt, kt_p, sizeof(kt)))
+ return -EFAULT;
+
+ if (kt.len > sizeof(scancode))
+ return -EINVAL;
+
+ kt.scancode = scancode;
+
+ error = input_get_keycode_big(dev, &kt);
+ if (error)
+ return error;
+
+ if (copy_to_user(kt_p, &kt, sizeof(kt)))
+ return -EFAULT;
+
+ /* FIXME: probably need some compat32 code */
+ if (copy_to_user(kt_p->scancode, kt.scancode, kt.len))
+ return -EFAULT;
+
+ return 0;
+
+ case EVIOCSKEYCODEBIG:
+ if (copy_from_user(&kt, kt_p, sizeof(kt)))
+ return -EFAULT;
+
+ if (kt.len > sizeof(scancode))
+ return -EINVAL;
+
+ kt.scancode = scancode;
+
+ /* FIXME: probably need some compat32 code */
+ if (copy_from_user(kt.scancode, kt_p->scancode, kt.len))
+ return -EFAULT;
+
+ return input_set_keycode_big(dev, &kt);
+
case EVIOCRMFF:
return input_ff_erase(dev, (int)(unsigned long) p, file);
@@ -551,6 +551,11 @@ static void input_disconnect_device(struct input_dev *dev)
spin_unlock_irq(&dev->event_lock);
}
+/*
+ * Those routines handle the default case where no [gs]etkeycode() is
+ * defined. In this case, an array indexed by the scancode is used.
+ */
+
static int input_fetch_keycode(struct input_dev *dev, int scancode)
{
switch (dev->keycodesize) {
@@ -565,25 +570,74 @@ static int input_fetch_keycode(struct input_dev *dev, int scancode)
}
}
-static int input_default_getkeycode(struct input_dev *dev,
- int scancode, int *keycode)
+/*
+ * Supports only 8, 16 and 32 bit scancodes. It wouldn't be that
+ * hard to write some machine-endian logic to support 24 bit scancodes,
+ * but it seemed overkill. It should also be noticed that, since there
+ * are, in general, less than 256 scancodes sparsed into the scancode
+ * space, even with 16 bits, the codespace is sparsed, with leads into
+ * memory and code ineficiency, when retrieving the entire scancode
+ * space.
+ * So, it is highly recommended to implement getkeycodebig/setkeycodebig
+ * instead of using a normal table approach, when more than 8 bits is
+ * needed for the scancode.
+ */
+static int input_fetch_scancode(struct keycode_table_entry *kt_entry,
+ u32 *scancode)
{
+ switch (kt_entry->len) {
+ case 1:
+ *scancode = *((u8 *)kt_entry->scancode);
+ break;
+ case 2:
+ *scancode = *((u16 *)kt_entry->scancode);
+ break;
+ case 4:
+ *scancode = *((u32 *)kt_entry->scancode);
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+
+static int input_default_getkeycode_from_index(struct input_dev *dev,
+ struct keycode_table_entry *kt_entry)
+{
+ u32 scancode = kt_entry->index;
+
if (!dev->keycodesize)
return -EINVAL;
if (scancode >= dev->keycodemax)
return -EINVAL;
- *keycode = input_fetch_keycode(dev, scancode);
+ kt_entry->keycode = input_fetch_keycode(dev, scancode);
+ memcpy(kt_entry->scancode, &scancode, 4);
return 0;
}
+static int input_default_getkeycode_from_scancode(struct input_dev *dev,
+ struct keycode_table_entry *kt_entry)
+{
+ if (input_fetch_scancode(kt_entry, &kt_entry->index))
+ return -EINVAL;
+
+ return input_default_getkeycode_from_index(dev, kt_entry);
+}
+
+
static int input_default_setkeycode(struct input_dev *dev,
- int scancode, int keycode)
+ struct keycode_table_entry *kt_entry)
{
int old_keycode;
int i;
+ u32 scancode;
+
+ if (input_fetch_scancode(kt_entry, &scancode))
+ return -EINVAL;
if (scancode >= dev->keycodemax)
return -EINVAL;
@@ -591,32 +645,33 @@ static int input_default_setkeycode(struct input_dev *dev,
if (!dev->keycodesize)
return -EINVAL;
- if (dev->keycodesize < sizeof(keycode) && (keycode >> (dev->keycodesize * 8)))
+ if (dev->keycodesize < sizeof(dev->keycode) &&
+ (kt_entry->keycode >> (dev->keycodesize * 8)))
return -EINVAL;
switch (dev->keycodesize) {
case 1: {
u8 *k = (u8 *)dev->keycode;
old_keycode = k[scancode];
- k[scancode] = keycode;
+ k[scancode] = kt_entry->keycode;
break;
}
case 2: {
u16 *k = (u16 *)dev->keycode;
old_keycode = k[scancode];
- k[scancode] = keycode;
+ k[scancode] = kt_entry->keycode;
break;
}
default: {
u32 *k = (u32 *)dev->keycode;
old_keycode = k[scancode];
- k[scancode] = keycode;
+ k[scancode] = kt_entry->keycode;
break;
}
}
clear_bit(old_keycode, dev->keybit);
- set_bit(keycode, dev->keybit);
+ set_bit(kt_entry->keycode, dev->keybit);
for (i = 0; i < dev->keycodemax; i++) {
if (input_fetch_keycode(dev, i) == old_keycode) {
@@ -629,6 +684,109 @@ static int input_default_setkeycode(struct input_dev *dev,
}
/**
+ * input_get_keycode_big - retrieve keycode currently mapped to a given scancode
+ * @dev: input device which keymap is being queried
+ * @kt_entry: keytable entry
+ *
+ * This function should be called by anyone interested in retrieving current
+ * keymap. Presently evdev handlers use it.
+ */
+int input_get_keycode_big(struct input_dev *dev,
+ struct keycode_table_entry *kt_entry)
+{
+ if (dev->getkeycode) {
+ u32 scancode = kt_entry->index;
+
+ /*
+ * Support for legacy drivers, that don't implement the new
+ * ioctls
+ */
+ memcpy(kt_entry->scancode, &scancode, 4);
+ return dev->getkeycode(dev, scancode,
+ &kt_entry->keycode);
+ } else
+ return dev->getkeycodebig_from_index(dev, kt_entry);
+}
+EXPORT_SYMBOL(input_get_keycode_big);
+
+/**
+ * input_set_keycode_big - attribute a keycode to a given scancode
+ * @dev: input device which keymap is being queried
+ * @kt_entry: keytable entry
+ *
+ * This function should be called by anyone needing to update current
+ * keymap. Presently keyboard and evdev handlers use it.
+ */
+int input_set_keycode_big(struct input_dev *dev,
+ struct keycode_table_entry *kt_entry)
+{
+ unsigned long flags;
+ int old_keycode;
+ int retval = -EINVAL;
+ u32 uninitialized_var(scancode);
+
+ if (kt_entry->keycode < 0 || kt_entry->keycode > KEY_MAX)
+ return -EINVAL;
+
+ spin_lock_irqsave(&dev->event_lock, flags);
+
+ /*
+ * We need to know the old scancode, in order to generate a
+ * keyup effect, if the set operation happens successfully
+ */
+ if (dev->getkeycode) {
+ /*
+ * Support for legacy drivers, that don't implement the new
+ * ioctls
+ */
+ if (!dev->setkeycode)
+ goto out;
+
+ if (input_fetch_scancode(kt_entry, &scancode))
+ return -EINVAL;
+
+ retval = dev->getkeycode(dev, scancode,
+ &old_keycode);
+ } else {
+ int new_keycode = kt_entry->keycode;
+
+ retval = dev->getkeycodebig_from_scancode(dev, kt_entry);
+ old_keycode = kt_entry->keycode;
+ kt_entry->keycode = new_keycode;
+ }
+
+ if (retval)
+ goto out;
+
+ if (dev->getkeycode)
+ retval = dev->setkeycode(dev, scancode,
+ kt_entry->keycode);
+ else
+ retval = dev->setkeycodebig(dev, kt_entry);
+ if (retval)
+ goto out;
+
+ /*
+ * Simulate keyup event if keycode is not present
+ * in the keymap anymore
+ */
+ if (test_bit(EV_KEY, dev->evbit) &&
+ !is_event_supported(old_keycode, dev->keybit, KEY_MAX) &&
+ __test_and_clear_bit(old_keycode, dev->key)) {
+
+ input_pass_event(dev, EV_KEY, old_keycode, 0);
+ if (dev->sync)
+ input_pass_event(dev, EV_SYN, SYN_REPORT, 1);
+ }
+
+ out:
+ spin_unlock_irqrestore(&dev->event_lock, flags);
+
+ return retval;
+}
+EXPORT_SYMBOL(input_set_keycode_big);
+
+/**
* input_get_keycode - retrieve keycode currently mapped to a given scancode
* @dev: input device which keymap is being queried
* @scancode: scancode (or its equivalent for device in question) for which
@@ -640,10 +798,31 @@ static int input_default_setkeycode(struct input_dev *dev,
*/
int input_get_keycode(struct input_dev *dev, int scancode, int *keycode)
{
- if (scancode < 0)
- return -EINVAL;
+ if (dev->getkeycode) {
+ /*
+ * Use the legacy calls
+ */
+ return dev->getkeycode(dev, scancode, keycode);
+ } else {
+ int retval;
+ struct keycode_table_entry kt_entry;
- return dev->getkeycode(dev, scancode, keycode);
+ /*
+ * Userspace is using a legacy call with a driver ported
+ * to the new way. This is a bad idea with long sparsed
+ * tables, since lots of the retrieved values will be in
+ * blank. Also, it makes sense only if the table size is
+ * lower than 2^32.
+ */
+ memset(&kt_entry, 0, sizeof(kt_entry));
+ kt_entry.len = 4;
+ kt_entry.index = scancode;
+
+ retval = dev->getkeycodebig_from_index(dev, &kt_entry);
+
+ *keycode = kt_entry.keycode;
+ return retval;
+ }
}
EXPORT_SYMBOL(input_get_keycode);
@@ -662,21 +841,46 @@ int input_set_keycode(struct input_dev *dev, int scancode, int keycode)
int old_keycode;
int retval;
- if (scancode < 0)
- return -EINVAL;
-
if (keycode < 0 || keycode > KEY_MAX)
return -EINVAL;
spin_lock_irqsave(&dev->event_lock, flags);
- retval = dev->getkeycode(dev, scancode, &old_keycode);
- if (retval)
- goto out;
+ if (dev->getkeycode) {
+ /*
+ * Use the legacy calls
+ */
+ retval = dev->getkeycode(dev, scancode, &old_keycode);
+ if (retval)
+ goto out;
- retval = dev->setkeycode(dev, scancode, keycode);
- if (retval)
- goto out;
+ retval = dev->setkeycode(dev, scancode, keycode);
+ if (retval)
+ goto out;
+ } else {
+ struct keycode_table_entry kt_entry;
+
+ /*
+ * Userspace is using a legacy call with a driver ported
+ * to the new way. This is a bad idea with long sparsed
+ * tables, since lots of the retrieved values will be in
+ * blank. Also, it makes sense only if the table size is
+ * lower than 2^32.
+ */
+ memset(&kt_entry, 0, sizeof(kt_entry));
+ kt_entry.len = 4;
+ kt_entry.scancode = (char *)&scancode;
+
+ retval = dev->getkeycodebig_from_scancode(dev, &kt_entry);
+ if (retval)
+ goto out;
+
+ kt_entry.keycode = keycode;
+
+ retval = dev->setkeycodebig(dev, &kt_entry);
+ if (retval)
+ goto out;
+ }
/*
* Simulate keyup event if keycode is not present
@@ -1585,11 +1789,17 @@ int input_register_device(struct input_dev *dev)
dev->rep[REP_PERIOD] = 33;
}
- if (!dev->getkeycode)
- dev->getkeycode = input_default_getkeycode;
+ if (!dev->getkeycode) {
+ if (!dev->getkeycodebig_from_index)
+ dev->getkeycodebig_from_index = input_default_getkeycode_from_index;
+ if (!dev->getkeycodebig_from_scancode)
+ dev->getkeycodebig_from_scancode = input_default_getkeycode_from_scancode;
+ }
- if (!dev->setkeycode)
- dev->setkeycode = input_default_setkeycode;
+ if (dev->setkeycode) {
+ if (!dev->setkeycodebig)
+ dev->setkeycodebig = input_default_setkeycode;
+ }
dev_set_name(&dev->dev, "input%ld",
(unsigned long) atomic_inc_return(&input_no) - 1);
@@ -34,7 +34,7 @@ struct input_event {
* Protocol version.
*/
-#define EV_VERSION 0x010000
+#define EV_VERSION 0x010001
/*
* IOCTLs (0x00 - 0x7f)
@@ -56,12 +56,22 @@ struct input_absinfo {
__s32 resolution;
};
+struct keycode_table_entry {
+ __u32 keycode; /* e.g. KEY_A */
+ __u32 index; /* Index for the given scan/key table, on EVIOCGKEYCODEBIG */
+ __u32 len; /* Length of the scancode */
+ __u32 reserved[2]; /* Reserved for future usage */
+ char *scancode; /* scancode, in machine-endian */
+};
+
#define EVIOCGVERSION _IOR('E', 0x01, int) /* get driver version */
#define EVIOCGID _IOR('E', 0x02, struct input_id) /* get device ID */
#define EVIOCGREP _IOR('E', 0x03, int[2]) /* get repeat settings */
#define EVIOCSREP _IOW('E', 0x03, int[2]) /* set repeat settings */
#define EVIOCGKEYCODE _IOR('E', 0x04, int[2]) /* get keycode */
#define EVIOCSKEYCODE _IOW('E', 0x04, int[2]) /* set keycode */
+#define EVIOCGKEYCODEBIG _IOR('E', 0x04, struct keycode_table_entry) /* get keycode */
+#define EVIOCSKEYCODEBIG _IOW('E', 0x04, struct keycode_table_entry) /* set keycode */
#define EVIOCGNAME(len) _IOC(_IOC_READ, 'E', 0x06, len) /* get device name */
#define EVIOCGPHYS(len) _IOC(_IOC_READ, 'E', 0x07, len) /* get physical location */
@@ -1022,13 +1032,22 @@ struct ff_effect {
* @keycodemax: size of keycode table
* @keycodesize: size of elements in keycode table
* @keycode: map of scancodes to keycodes for this device
- * @setkeycode: optional method to alter current keymap, used to implement
+ * @setkeycode: optional legacy method to alter current keymap, used to
+ * implement sparse keymaps. Shouldn't be used on new drivers
+ * @getkeycode: optional legacy method to retrieve current keymap.
+ * Shouldn't be used on new drivers.
+ * @setkeycodebig: optional method to alter current keymap, used to implement
* sparse keymaps. If not supplied default mechanism will be used.
* The method is being called while holding event_lock and thus must
* not sleep
- * @getkeycode: optional method to retrieve current keymap. If not supplied
- * default mechanism will be used. The method is being called while
- * holding event_lock and thus must not sleep
+ * @getkeycodebig_from_index: optional method to retrieve current keymap from
+ * an array index. If not supplied default mechanism will be used.
+ * The method is being called while holding event_lock and thus must
+ * not sleep
+ * @getkeycodebig_from_scancode: optional method to retrieve current keymap
+ * from an scancode. If not supplied default mechanism will be used.
+ * The method is being called while holding event_lock and thus must
+ * not sleep
* @ff: force feedback structure associated with the device if device
* supports force feedback effects
* @repeat_key: stores key code of the last key pressed; used to implement
@@ -1101,6 +1120,12 @@ struct input_dev {
void *keycode;
int (*setkeycode)(struct input_dev *dev, int scancode, int keycode);
int (*getkeycode)(struct input_dev *dev, int scancode, int *keycode);
+ int (*setkeycodebig)(struct input_dev *dev,
+ struct keycode_table_entry *kt_entry);
+ int (*getkeycodebig_from_index)(struct input_dev *dev,
+ struct keycode_table_entry *kt_entry);
+ int (*getkeycodebig_from_scancode)(struct input_dev *dev,
+ struct keycode_table_entry *kt_entry);
struct ff_device *ff;
@@ -1366,6 +1391,11 @@ static inline void input_set_abs_params(struct input_dev *dev, int axis, int min
int input_get_keycode(struct input_dev *dev, int scancode, int *keycode);
int input_set_keycode(struct input_dev *dev, int scancode, int keycode);
+int input_get_keycode_big(struct input_dev *dev,
+ struct keycode_table_entry *kt_entry);
+int input_set_keycode_big(struct input_dev *dev,
+ struct keycode_table_entry *kt_entry);
+
extern struct class input_class;