@@ -67,6 +67,16 @@ config IR_SONY_DECODER
Enable this option if you have an infrared remote control which
uses the Sony protocol, and you need software decoding support.
+config IR_LIRC_CODEC
+ tristate "Enable IR to LIRC bridge"
+ depends on IR_CORE
+ depends on LIRC
+ default y
+
+ ---help---
+ Enable this option to pass raw IR to and from userspace via
+ the LIRC interface.
+
config IR_IMON
tristate "SoundGraph iMON Receiver and Display"
depends on USB_ARCH_HAS_HCD
@@ -11,6 +11,7 @@ obj-$(CONFIG_IR_RC5_DECODER) += ir-rc5-decoder.o
obj-$(CONFIG_IR_RC6_DECODER) += ir-rc6-decoder.o
obj-$(CONFIG_IR_JVC_DECODER) += ir-jvc-decoder.o
obj-$(CONFIG_IR_SONY_DECODER) += ir-sony-decoder.o
+obj-$(CONFIG_IR_LIRC_CODEC) += ir-lirc-codec.o
# stand-alone IR receivers/transmitters
obj-$(CONFIG_IR_IMON) += imon.o
@@ -73,6 +73,11 @@ struct ir_raw_event_ctrl {
bool first;
bool toggle;
} jvc;
+ struct lirc_codec {
+ struct ir_input_dev *ir_dev;
+ struct lirc_driver *drv;
+ int lircdata;
+ } lirc;
};
/* macros for IR decoders */
@@ -164,4 +169,12 @@ void ir_raw_init(void);
#define load_sony_decode() 0
#endif
+/* from ir-lirc-codec.c */
+#ifdef CONFIG_IR_LIRC_CODEC_MODULE
+#define load_lirc_codec() request_module("ir-lirc-codec")
+#else
+#define load_lirc_codec() 0
+#endif
+
+
#endif /* _IR_RAW_EVENT */
new file mode 100644
@@ -0,0 +1,284 @@
+/* ir-lirc-codec.c - ir-core to classic lirc interface bridge
+ *
+ * Copyright (C) 2010 by Jarod Wilson <jarod@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <media/lirc.h>
+#include <media/ir-core.h>
+#include "ir-core-priv.h"
+#include "lirc_dev.h"
+
+#define LIRCBUF_SIZE 256
+
+/**
+ * ir_lirc_decode() - Send raw IR data to lirc_dev to be relayed to the
+ * lircd userspace daemon for decoding.
+ * @input_dev: the struct input_dev descriptor of the device
+ * @duration: the struct ir_raw_event descriptor of the pulse/space
+ *
+ * This function returns -EINVAL if the lirc interfaces aren't wired up.
+ */
+static int ir_lirc_decode(struct input_dev *input_dev, struct ir_raw_event ev)
+{
+ struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+
+ if (!(ir_dev->raw->enabled_protocols & IR_TYPE_LIRC))
+ return 0;
+
+ if (!ir_dev->raw->lirc.drv || !ir_dev->raw->lirc.drv->rbuf)
+ return -EINVAL;
+
+ IR_dprintk(2, "LIRC data transfer started (%uus %s)\n",
+ TO_US(ev.duration), TO_STR(ev.pulse));
+
+ ir_dev->raw->lirc.lircdata += ev.duration / 1000;
+ if (ev.pulse)
+ ir_dev->raw->lirc.lircdata |= PULSE_BIT;
+
+ lirc_buffer_write(ir_dev->raw->lirc.drv->rbuf,
+ (unsigned char *) &ir_dev->raw->lirc.lircdata);
+ wake_up(&ir_dev->raw->lirc.drv->rbuf->wait_poll);
+
+ ir_dev->raw->lirc.lircdata = 0;
+
+ return 0;
+}
+
+static ssize_t ir_lirc_transmit_ir(struct file *file, const char *buf,
+ size_t n, loff_t *ppos)
+{
+ struct lirc_codec *lirc;
+ struct ir_input_dev *ir_dev;
+ int *txbuf; /* buffer with values to transmit */
+ int ret = 0, count;
+
+ lirc = lirc_get_pdata(file);
+ if (!lirc)
+ return -EFAULT;
+
+ if (n % sizeof(int))
+ return -EINVAL;
+
+ count = n / sizeof(int);
+ if (count > LIRCBUF_SIZE || count % 2 == 0)
+ return -EINVAL;
+
+ txbuf = kzalloc(sizeof(int) * LIRCBUF_SIZE, GFP_KERNEL);
+ if (!txbuf)
+ return -ENOMEM;
+
+ if (copy_from_user(txbuf, buf, n)) {
+ ret = -EFAULT;
+ goto out;
+ }
+
+ ir_dev = lirc->ir_dev;
+ if (!ir_dev) {
+ ret = -EFAULT;
+ goto out;
+ }
+
+ if (ir_dev->props && ir_dev->props->tx_ir)
+ ret = ir_dev->props->tx_ir(ir_dev->props->priv, txbuf, (u32)n);
+
+out:
+ kfree(txbuf);
+ return ret;
+}
+
+static int ir_lirc_ioctl(struct inode *node, struct file *filep,
+ unsigned int cmd, unsigned long arg)
+{
+ struct lirc_codec *lirc;
+ struct ir_input_dev *ir_dev;
+ int ret = 0;
+ void *drv_data;
+ unsigned long val;
+
+ lirc = lirc_get_pdata(filep);
+ if (!lirc)
+ return -EFAULT;
+
+ ir_dev = lirc->ir_dev;
+ if (!ir_dev || !ir_dev->props || !ir_dev->props->priv)
+ return -EFAULT;
+
+ drv_data = ir_dev->props->priv;
+
+ switch (cmd) {
+ case LIRC_SET_TRANSMITTER_MASK:
+ ret = get_user(val, (unsigned long *)arg);
+ if (ret)
+ return ret;
+
+ if (ir_dev->props && ir_dev->props->s_tx_mask)
+ ret = ir_dev->props->s_tx_mask(drv_data, (u32)val);
+ else
+ return -EINVAL;
+ break;
+
+ case LIRC_SET_SEND_CARRIER:
+ ret = get_user(val, (unsigned long *)arg);
+ if (ret)
+ return ret;
+
+ if (ir_dev->props && ir_dev->props->s_tx_carrier)
+ ir_dev->props->s_tx_carrier(drv_data, (u32)val);
+ else
+ return -EINVAL;
+ break;
+
+ case LIRC_GET_SEND_MODE:
+ val = LIRC_CAN_SEND_PULSE & LIRC_CAN_SEND_MASK;
+ ret = put_user(val, (unsigned long *)arg);
+ break;
+
+ case LIRC_SET_SEND_MODE:
+ ret = get_user(val, (unsigned long *)arg);
+ if (ret)
+ return ret;
+
+ if (val != (LIRC_MODE_PULSE & LIRC_CAN_SEND_MASK))
+ return -EINVAL;
+ break;
+
+ default:
+ return lirc_dev_fop_ioctl(node, filep, cmd, arg);
+ }
+
+ return ret;
+}
+
+static int ir_lirc_open(void *data)
+{
+ return 0;
+}
+
+static void ir_lirc_close(void *data)
+{
+ return;
+}
+
+static struct file_operations lirc_fops = {
+ .owner = THIS_MODULE,
+ .write = ir_lirc_transmit_ir,
+ .ioctl = ir_lirc_ioctl,
+ .read = lirc_dev_fop_read,
+ .poll = lirc_dev_fop_poll,
+ .open = lirc_dev_fop_open,
+ .release = lirc_dev_fop_close,
+};
+
+static int ir_lirc_register(struct input_dev *input_dev)
+{
+ struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+ struct lirc_driver *drv;
+ struct lirc_buffer *rbuf;
+ int rc = -ENOMEM;
+ unsigned long features;
+
+ drv = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL);
+ if (!drv)
+ return rc;
+
+ rbuf = kzalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
+ if (!drv)
+ goto rbuf_alloc_failed;
+
+ rc = lirc_buffer_init(rbuf, sizeof(int), LIRCBUF_SIZE);
+ if (rc)
+ goto rbuf_init_failed;
+
+ features = LIRC_CAN_REC_MODE2;
+ if (ir_dev->props->tx_ir) {
+ features |= LIRC_CAN_SEND_PULSE;
+ if (ir_dev->props->s_tx_mask)
+ features |= LIRC_CAN_SET_TRANSMITTER_MASK;
+ if (ir_dev->props->s_tx_carrier)
+ features |= LIRC_CAN_SET_SEND_CARRIER;
+ }
+
+ snprintf(drv->name, sizeof(drv->name), "ir-lirc-codec (%s)",
+ ir_dev->driver_name);
+ drv->minor = -1;
+ drv->features = features;
+ drv->data = &ir_dev->raw->lirc;
+ drv->rbuf = rbuf;
+ drv->set_use_inc = &ir_lirc_open;
+ drv->set_use_dec = &ir_lirc_close;
+ drv->code_length = sizeof(struct ir_raw_event) * 8;
+ drv->fops = &lirc_fops;
+ drv->dev = &ir_dev->dev;
+ drv->owner = THIS_MODULE;
+
+ drv->minor = lirc_register_driver(drv);
+ if (drv->minor < 0) {
+ rc = -ENODEV;
+ goto lirc_register_failed;
+ }
+
+ ir_dev->raw->lirc.drv = drv;
+ ir_dev->raw->lirc.ir_dev = ir_dev;
+ ir_dev->raw->lirc.lircdata = PULSE_MASK;
+
+ return 0;
+
+lirc_register_failed:
+rbuf_init_failed:
+ kfree(rbuf);
+rbuf_alloc_failed:
+ kfree(drv);
+
+ return rc;
+}
+
+static int ir_lirc_unregister(struct input_dev *input_dev)
+{
+ struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+ struct lirc_codec *lirc = &ir_dev->raw->lirc;
+
+ lirc_unregister_driver(lirc->drv->minor);
+ lirc_buffer_free(lirc->drv->rbuf);
+ kfree(lirc->drv);
+
+ return 0;
+}
+
+static struct ir_raw_handler lirc_handler = {
+ .protocols = IR_TYPE_LIRC,
+ .decode = ir_lirc_decode,
+ .raw_register = ir_lirc_register,
+ .raw_unregister = ir_lirc_unregister,
+};
+
+static int __init ir_lirc_codec_init(void)
+{
+ ir_raw_handler_register(&lirc_handler);
+
+ printk(KERN_INFO "IR LIRC bridge handler initialized\n");
+ return 0;
+}
+
+static void __exit ir_lirc_codec_exit(void)
+{
+ ir_raw_handler_unregister(&lirc_handler);
+}
+
+module_init(ir_lirc_codec_init);
+module_exit(ir_lirc_codec_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
+MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
+MODULE_DESCRIPTION("LIRC IR handler bridge");
@@ -253,6 +253,7 @@ static void init_decoders(struct work_struct *work)
load_rc6_decode();
load_jvc_decode();
load_sony_decode();
+ load_lirc_codec();
/* If needed, we may later add some init code. In this case,
it is needed to change the CONFIG_MODULE test at ir-core.h
@@ -93,6 +93,11 @@ static ssize_t show_protocols(struct device *d,
else if (allowed & IR_TYPE_SONY)
tmp += sprintf(tmp, "sony ");
+ if (allowed & enabled & IR_TYPE_LIRC)
+ tmp += sprintf(tmp, "[lirc] ");
+ else if (allowed & IR_TYPE_LIRC)
+ tmp += sprintf(tmp, "lirc ");
+
if (tmp != buf)
tmp--;
*tmp = '\n';
@@ -160,6 +165,9 @@ static ssize_t store_protocols(struct device *d,
} else if (!strncasecmp(tmp, "sony", 4)) {
tmp += 4;
mask = IR_TYPE_SONY;
+ } else if (!strncasecmp(tmp, "lirc", 4)) {
+ tmp += 4;
+ mask = IR_TYPE_LIRC;
} else {
IR_dprintk(1, "Unknown protocol\n");
return -EINVAL;
@@ -17,10 +17,12 @@
#define IR_TYPE_RC6 (1 << 2) /* Philips RC6 protocol */
#define IR_TYPE_JVC (1 << 3) /* JVC protocol */
#define IR_TYPE_SONY (1 << 4) /* Sony12/15/20 protocol */
+#define IR_TYPE_LIRC (1 << 30) /* Pass raw IR to lirc userspace */
#define IR_TYPE_OTHER (1u << 31)
#define IR_TYPE_ALL (IR_TYPE_RC5 | IR_TYPE_NEC | IR_TYPE_RC6 | \
- IR_TYPE_JVC | IR_TYPE_SONY | IR_TYPE_OTHER)
+ IR_TYPE_JVC | IR_TYPE_SONY | IR_TYPE_LIRC | \
+ IR_TYPE_OTHER)
struct ir_scancode {
u32 scancode;