diff --git a/drivers/media/IR/Kconfig b/drivers/media/IR/Kconfig
index e557ae0..19a9003 100644
--- a/drivers/media/IR/Kconfig
+++ b/drivers/media/IR/Kconfig
@@ -102,3 +102,15 @@ config IR_MCEUSB
 
 	   To compile this driver as a module, choose M here: the
 	   module will be called mceusb.
+
+config IR_STREAMZAP
+	tristate "Streamzap PC Remote IR Receiver"
+	depends on USB_ARCH_HAS_HCD
+	depends on IR_CORE
+	select USB
+	---help---
+	   Say Y here if you want to use a Streamzap PC Remote
+	   Infrared Receiver.
+
+	   To compile this driver as a module, choose M here: the
+	   module will be called streamzap.
diff --git a/drivers/media/IR/Makefile b/drivers/media/IR/Makefile
index 2ae4f3a..2566fb4 100644
--- a/drivers/media/IR/Makefile
+++ b/drivers/media/IR/Makefile
@@ -16,3 +16,4 @@ obj-$(CONFIG_IR_LIRC_CODEC) += ir-lirc-codec.o
 # stand-alone IR receivers/transmitters
 obj-$(CONFIG_IR_IMON) += imon.o
 obj-$(CONFIG_IR_MCEUSB) += mceusb.o
+obj-$(CONFIG_IR_STREAMZAP) += streamzap.o
diff --git a/drivers/media/IR/streamzap.c b/drivers/media/IR/streamzap.c
new file mode 100644
index 0000000..058e29f
--- /dev/null
+++ b/drivers/media/IR/streamzap.c
@@ -0,0 +1,741 @@
+/*
+ * Streamzap Remote Control driver
+ *
+ * Copyright (c) 2005 Christoph Bartelmus <lirc@bartelmus.de>
+ * Copyright (c) 2010 Jarod Wilson <jarod@wilsonet.com>
+ *
+ * This driver was based on the work of Greg Wickham and Adrian
+ * Dewhurst. It was substantially rewritten to support correct signal
+ * gaps and now maintains a delay buffer, which is used to present
+ * consistent timing behaviour to user space applications. Without the
+ * delay buffer an ugly hack would be required in lircd, which can
+ * cause sluggish signal decoding in certain situations.
+ *
+ * Ported to in-kernel ir-core interface by Jarod Wilson
+ *
+ * This driver is based on the USB skeleton driver packaged with the
+ * kernel; copyright (C) 2001-2003 Greg Kroah-Hartman (greg@kroah.com)
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/input.h>
+#include <media/ir-core.h>
+
+#define DRIVER_VERSION	"1.60"
+#define DRIVER_NAME	"streamzap"
+#define DRIVER_DESC	"Streamzap Remote Control driver"
+
+#ifdef CONFIG_USB_DEBUG
+static int debug = 1;
+#else
+static int debug;
+#endif
+
+#define USB_STREAMZAP_VENDOR_ID		0x0e9c
+#define USB_STREAMZAP_PRODUCT_ID	0x0000
+
+/* table of devices that work with this driver */
+static struct usb_device_id streamzap_table[] = {
+	/* Streamzap Remote Control */
+	{ USB_DEVICE(USB_STREAMZAP_VENDOR_ID, USB_STREAMZAP_PRODUCT_ID) },
+	/* Terminating entry */
+	{ }
+};
+
+MODULE_DEVICE_TABLE(usb, streamzap_table);
+
+#define STREAMZAP_PULSE_MASK 0xf0
+#define STREAMZAP_SPACE_MASK 0x0f
+#define STREAMZAP_TIMEOUT    0xff
+#define STREAMZAP_RESOLUTION 256
+
+/* number of samples buffered */
+#define SZ_BUF_LEN 128
+
+enum StreamzapDecoderState {
+	PulseSpace,
+	FullPulse,
+	FullSpace,
+	IgnorePulse
+};
+
+/* structure to hold our device specific stuff */
+struct streamzap_ir {
+
+	/* ir-core */
+	struct ir_dev_props *props;
+	struct ir_raw_event rawir;
+
+	/* core device info */
+	struct device *dev;
+	struct input_dev *idev;
+
+	/* usb */
+	struct usb_device	*usbdev;
+	struct usb_interface	*interface;
+	struct usb_endpoint_descriptor *endpoint;
+	struct urb		*urb_in;
+
+	/* buffer & dma */
+	unsigned char		*buf_in;
+	dma_addr_t		dma_in;
+	unsigned int		buf_in_len;
+
+	/* timer used to support delay buffering */
+	struct timer_list	delay_timer;
+	bool			timer_running;
+	spinlock_t		timer_lock;
+	struct timer_list	flush_timer;
+	bool			flush;
+
+	/* delay buffer */
+	struct kfifo fifo;
+	bool fifo_initialized;
+
+	/* track what state we're in */
+	enum StreamzapDecoderState decoder_state;
+	/* tracks whether we are currently receiving some signal */
+	bool			idle;
+	/* sum of signal lengths received since signal start */
+	unsigned long		sum;
+	/* start time of signal; necessary for gap tracking */
+	struct timeval		signal_last;
+	struct timeval		signal_start;
+	/* bool			timeout_enabled; */
+
+	char			name[128];
+	char			phys[64];
+};
+
+
+/* local function prototypes */
+static int streamzap_probe(struct usb_interface *interface,
+			   const struct usb_device_id *id);
+static void streamzap_disconnect(struct usb_interface *interface);
+static void streamzap_callback(struct urb *urb);
+static int streamzap_suspend(struct usb_interface *intf, pm_message_t message);
+static int streamzap_resume(struct usb_interface *intf);
+
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver streamzap_driver = {
+	.name =		DRIVER_NAME,
+	.probe =	streamzap_probe,
+	.disconnect =	streamzap_disconnect,
+	.suspend =	streamzap_suspend,
+	.resume =	streamzap_resume,
+	.id_table =	streamzap_table,
+};
+
+static void streamzap_stop_timer(struct streamzap_ir *sz)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&sz->timer_lock, flags);
+	if (sz->timer_running) {
+		sz->timer_running = false;
+		spin_unlock_irqrestore(&sz->timer_lock, flags);
+		del_timer_sync(&sz->delay_timer);
+	} else {
+		spin_unlock_irqrestore(&sz->timer_lock, flags);
+	}
+}
+
+static void streamzap_flush_timeout(unsigned long arg)
+{
+	struct streamzap_ir *sz = (struct streamzap_ir *)arg;
+
+	dev_info(sz->dev, "%s: callback firing\n", __func__);
+
+	/* finally start accepting data */
+	sz->flush = false;
+}
+
+static void streamzap_delay_timeout(unsigned long arg)
+{
+	struct streamzap_ir *sz = (struct streamzap_ir *)arg;
+	struct ir_raw_event rawir = { .pulse = false, .duration = 0 };
+	unsigned long flags;
+	int len, ret;
+	static unsigned long delay;
+	bool wake = false;
+
+	/* deliver data every 10 ms */
+	delay = msecs_to_jiffies(10);
+
+	spin_lock_irqsave(&sz->timer_lock, flags);
+
+	if (kfifo_len(&sz->fifo) > 0) {
+		ret = kfifo_out(&sz->fifo, &rawir, sizeof(rawir));
+		if (ret != sizeof(rawir))
+			dev_err(sz->dev, "Problem w/kfifo_out...\n");
+		ir_raw_event_store(sz->idev, &rawir);
+		wake = true;
+	}
+
+	len = kfifo_len(&sz->fifo);
+	if (len > 0) {
+		while ((len < SZ_BUF_LEN / 2) &&
+		       (len < SZ_BUF_LEN * sizeof(int))) {
+			ret = kfifo_out(&sz->fifo, &rawir, sizeof(rawir));
+			if (ret != sizeof(rawir))
+				dev_err(sz->dev, "Problem w/kfifo_out...\n");
+			ir_raw_event_store(sz->idev, &rawir);
+			wake = true;
+			len = kfifo_len(&sz->fifo);
+		}
+		if (sz->timer_running)
+			mod_timer(&sz->delay_timer, jiffies + delay);
+
+	} else {
+		sz->timer_running = false;
+	}
+
+	if (wake)
+		ir_raw_event_handle(sz->idev);
+
+	spin_unlock_irqrestore(&sz->timer_lock, flags);
+}
+
+static void streamzap_flush_delay_buffer(struct streamzap_ir *sz)
+{
+	struct ir_raw_event rawir = { .pulse = false, .duration = 0 };
+	bool wake = false;
+	int ret;
+
+	while (kfifo_len(&sz->fifo) > 0) {
+		ret = kfifo_out(&sz->fifo, &rawir, sizeof(rawir));
+		if (ret != sizeof(rawir))
+			dev_err(sz->dev, "Problem w/kfifo_out...\n");
+		ir_raw_event_store(sz->idev, &rawir);
+		wake = true;
+	}
+
+	if (wake)
+		ir_raw_event_handle(sz->idev);
+}
+
+static void sz_push(struct streamzap_ir *sz)
+{
+	struct ir_raw_event rawir = { .pulse = false, .duration = 0 };
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&sz->timer_lock, flags);
+	if (kfifo_len(&sz->fifo) >= sizeof(int) * SZ_BUF_LEN) {
+		ret = kfifo_out(&sz->fifo, &rawir, sizeof(rawir));
+		if (ret != sizeof(rawir))
+			dev_err(sz->dev, "Problem w/kfifo_out...\n");
+		ir_raw_event_store(sz->idev, &rawir);
+	}
+
+	kfifo_in(&sz->fifo, &sz->rawir, sizeof(rawir));
+
+	if (!sz->timer_running) {
+		sz->delay_timer.expires = jiffies + (HZ / 10);
+		add_timer(&sz->delay_timer);
+		sz->timer_running = true;
+	}
+
+	spin_unlock_irqrestore(&sz->timer_lock, flags);
+}
+
+static void sz_push_full_pulse(struct streamzap_ir *sz,
+			       unsigned char value)
+{
+	if (sz->idle) {
+		long deltv;
+
+		sz->signal_last = sz->signal_start;
+		do_gettimeofday(&sz->signal_start);
+
+		deltv = sz->signal_start.tv_sec - sz->signal_last.tv_sec;
+		sz->rawir.pulse = false;
+		if (deltv > 15) {
+			/* really long time */
+			sz->rawir.duration = IR_MAX_DURATION;
+		} else {
+			sz->rawir.duration = (int)(deltv * 1000000 +
+				sz->signal_start.tv_usec -
+				sz->signal_last.tv_usec);
+			sz->rawir.duration -= sz->sum;
+			sz->rawir.duration *= 1000;
+			sz->rawir.duration &= IR_MAX_DURATION;
+		}
+		dev_dbg(sz->dev, "ls %u\n", sz->rawir.duration);
+		sz_push(sz);
+
+		sz->idle = 0;
+		sz->sum = 0;
+	}
+
+	sz->rawir.pulse = true;
+	sz->rawir.duration = ((int) value) * STREAMZAP_RESOLUTION;
+	sz->rawir.duration += STREAMZAP_RESOLUTION / 2;
+	sz->sum += sz->rawir.duration;
+	sz->rawir.duration *= 1000;
+	sz->rawir.duration &= IR_MAX_DURATION;
+	dev_dbg(sz->dev, "p %u\n", sz->rawir.duration);
+	sz_push(sz);
+}
+
+static void sz_push_half_pulse(struct streamzap_ir *sz,
+			       unsigned char value)
+{
+	sz_push_full_pulse(sz, (value & STREAMZAP_PULSE_MASK) >> 4);
+}
+
+static void sz_push_full_space(struct streamzap_ir *sz,
+			       unsigned char value)
+{
+	sz->rawir.pulse = false;
+	sz->rawir.duration = ((int) value) * STREAMZAP_RESOLUTION;
+	sz->rawir.duration += STREAMZAP_RESOLUTION / 2;
+	sz->sum += sz->rawir.duration;
+	sz->rawir.duration *= 1000;
+	dev_dbg(sz->dev, "s %u\n", sz->rawir.duration);
+	sz_push(sz);
+}
+
+static void sz_push_half_space(struct streamzap_ir *sz,
+			       unsigned long value)
+{
+	sz_push_full_space(sz, value & STREAMZAP_SPACE_MASK);
+}
+
+/**
+ * streamzap_callback - usb IRQ handler callback
+ *
+ * This procedure is invoked on reception of data from
+ * the usb remote.
+ */
+static void streamzap_callback(struct urb *urb)
+{
+	struct streamzap_ir *sz;
+	unsigned int i;
+	int len;
+	#if 0
+	static int timeout = (((STREAMZAP_TIMEOUT * STREAMZAP_RESOLUTION) &
+				IR_MAX_DURATION) | 0x03000000);
+	#endif
+
+	if (!urb)
+		return;
+
+	sz = urb->context;
+	len = urb->actual_length;
+
+	switch (urb->status) {
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/*
+		 * this urb is terminated, clean up.
+		 * sz might already be invalid at this point
+		 */
+		dev_err(sz->dev, "urb terminated, status: %d\n", urb->status);
+		return;
+	default:
+		break;
+	}
+
+	dev_dbg(sz->dev, "%s: received urb, len %d\n", __func__, len);
+	if (!sz->flush) {
+		for (i = 0; i < urb->actual_length; i++) {
+			dev_dbg(sz->dev, "%d: %x\n", i,
+				(unsigned char)sz->buf_in[i]);
+			switch (sz->decoder_state) {
+			case PulseSpace:
+				if ((sz->buf_in[i] & STREAMZAP_PULSE_MASK) ==
+				    STREAMZAP_PULSE_MASK) {
+					sz->decoder_state = FullPulse;
+					continue;
+				} else if ((sz->buf_in[i] & STREAMZAP_SPACE_MASK)
+					   == STREAMZAP_SPACE_MASK) {
+					sz_push_half_pulse(sz, sz->buf_in[i]);
+					sz->decoder_state = FullSpace;
+					continue;
+				} else {
+					sz_push_half_pulse(sz, sz->buf_in[i]);
+					sz_push_half_space(sz, sz->buf_in[i]);
+				}
+				break;
+			case FullPulse:
+				sz_push_full_pulse(sz, sz->buf_in[i]);
+				sz->decoder_state = IgnorePulse;
+				break;
+			case FullSpace:
+				if (sz->buf_in[i] == STREAMZAP_TIMEOUT) {
+					sz->idle = 1;
+					streamzap_stop_timer(sz);
+					#if 0
+					if (sz->timeout_enabled) {
+						sz->rawir.pulse = false;
+						sz->rawir.duration = timeout;
+						sz->rawir.duration *= 1000;
+						sz_push(sz);
+					}
+					#endif
+					streamzap_flush_delay_buffer(sz);
+				} else
+					sz_push_full_space(sz, sz->buf_in[i]);
+				sz->decoder_state = PulseSpace;
+				break;
+			case IgnorePulse:
+				if ((sz->buf_in[i]&STREAMZAP_SPACE_MASK) ==
+				    STREAMZAP_SPACE_MASK) {
+					sz->decoder_state = FullSpace;
+					continue;
+				}
+				sz_push_half_space(sz, sz->buf_in[i]);
+				sz->decoder_state = PulseSpace;
+				break;
+			}
+		}
+	}
+
+	usb_submit_urb(urb, GFP_ATOMIC);
+
+	return;
+}
+
+static struct input_dev *streamzap_init_input_dev(struct streamzap_ir *sz)
+{
+	struct input_dev *idev;
+	struct ir_dev_props *props;
+	struct device *dev = sz->dev;
+	int ret;
+
+	idev = input_allocate_device();
+	if (!idev) {
+		dev_err(dev, "remote input dev allocation failed\n");
+		goto idev_alloc_failed;
+	}
+
+	props = kzalloc(sizeof(struct ir_dev_props), GFP_KERNEL);
+	if (!props) {
+		dev_err(dev, "remote ir dev props allocation failed\n");
+		goto props_alloc_failed;
+	}
+
+	snprintf(sz->name, sizeof(sz->name), "Streamzap PC Remote Infrared "
+		 "Receiver (%04x:%04x)",
+		 le16_to_cpu(sz->usbdev->descriptor.idVendor),
+		 le16_to_cpu(sz->usbdev->descriptor.idProduct));
+
+	idev->name = sz->name;
+	usb_make_path(sz->usbdev, sz->phys, sizeof(sz->phys));
+	strlcat(sz->phys, "/input0", sizeof(sz->phys));
+	idev->phys = sz->phys;
+
+	props->priv = sz;
+	props->driver_type = RC_DRIVER_IR_RAW;
+	/* FIXME: not sure about supported protocols, check on this */
+	props->allowed_protos = IR_TYPE_RC5 | IR_TYPE_RC6;
+
+	sz->props = props;
+
+	ret = ir_input_register(idev, RC_MAP_RC5_STREAMZAP, props, DRIVER_NAME);
+	if (ret < 0) {
+		dev_err(dev, "remote input device register failed\n");
+		goto irdev_failed;
+	}
+
+	return idev;
+
+irdev_failed:
+	kfree(props);
+props_alloc_failed:
+	input_free_device(idev);
+idev_alloc_failed:
+	return NULL;
+}
+
+static int streamzap_delay_buf_init(struct streamzap_ir *sz)
+{
+	int ret;
+
+	ret = kfifo_alloc(&sz->fifo, sizeof(int) * SZ_BUF_LEN,
+			  GFP_KERNEL);
+	if (ret == 0)
+		sz->fifo_initialized = 1;
+
+	return ret;
+}
+
+static void streamzap_start_flush_timer(struct streamzap_ir *sz)
+{
+	sz->flush_timer.expires = jiffies + HZ;
+	sz->flush = true;
+	add_timer(&sz->flush_timer);
+
+	sz->urb_in->dev = sz->usbdev;
+	if (usb_submit_urb(sz->urb_in, GFP_ATOMIC))
+		dev_err(sz->dev, "urb submit failed\n");
+}
+
+/**
+ *	streamzap_probe
+ *
+ *	Called by usb-core to associated with a candidate device
+ *	On any failure the return value is the ERROR
+ *	On success return 0
+ */
+static int __devinit streamzap_probe(struct usb_interface *intf,
+				     const struct usb_device_id *id)
+{
+	struct usb_device *usbdev = interface_to_usbdev(intf);
+	struct usb_host_interface *iface_host;
+	struct streamzap_ir *sz = NULL;
+	char buf[63], name[128] = "";
+	int retval = -ENOMEM;
+	int pipe, maxp;
+
+	/* Allocate space for device driver specific data */
+	sz = kzalloc(sizeof(struct streamzap_ir), GFP_KERNEL);
+	if (!sz)
+		return -ENOMEM;
+
+	sz->usbdev = usbdev;
+	sz->interface = intf;
+
+	/* Check to ensure endpoint information matches requirements */
+	iface_host = intf->cur_altsetting;
+
+	if (iface_host->desc.bNumEndpoints != 1) {
+		dev_err(&intf->dev, "%s: Unexpected desc.bNumEndpoints (%d)\n",
+			__func__, iface_host->desc.bNumEndpoints);
+		retval = -ENODEV;
+		goto free_sz;
+	}
+
+	sz->endpoint = &(iface_host->endpoint[0].desc);
+	if ((sz->endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+	    != USB_DIR_IN) {
+		dev_err(&intf->dev, "%s: endpoint doesn't match input device "
+			"02%02x\n", __func__, sz->endpoint->bEndpointAddress);
+		retval = -ENODEV;
+		goto free_sz;
+	}
+
+	if ((sz->endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+	    != USB_ENDPOINT_XFER_INT) {
+		dev_err(&intf->dev, "%s: endpoint attributes don't match xfer "
+			"02%02x\n", __func__, sz->endpoint->bmAttributes);
+		retval = -ENODEV;
+		goto free_sz;
+	}
+
+	pipe = usb_rcvintpipe(usbdev, sz->endpoint->bEndpointAddress);
+	maxp = usb_maxpacket(usbdev, pipe, usb_pipeout(pipe));
+
+	if (maxp == 0) {
+		dev_err(&intf->dev, "%s: endpoint Max Packet Size is 0!?!\n",
+			__func__);
+		retval = -ENODEV;
+		goto free_sz;
+	}
+
+	/* Allocate the USB buffer and IRQ URB */
+	sz->buf_in = usb_alloc_coherent(usbdev, maxp, GFP_ATOMIC, &sz->dma_in);
+	if (!sz->buf_in)
+		goto free_sz;
+
+	sz->urb_in = usb_alloc_urb(0, GFP_KERNEL);
+	if (!sz->urb_in)
+		goto free_buf_in;
+
+	sz->dev = &intf->dev;
+	sz->buf_in_len = maxp;
+
+	if (usbdev->descriptor.iManufacturer
+	    && usb_string(usbdev, usbdev->descriptor.iManufacturer,
+			  buf, sizeof(buf)) > 0)
+		strlcpy(name, buf, sizeof(name));
+
+	if (usbdev->descriptor.iProduct
+	    && usb_string(usbdev, usbdev->descriptor.iProduct,
+			  buf, sizeof(buf)) > 0)
+		snprintf(name + strlen(name), sizeof(name) - strlen(name),
+			 " %s", buf);
+
+	retval = streamzap_delay_buf_init(sz);
+	if (retval) {
+		dev_err(&intf->dev, "%s: delay buffer init failed\n", __func__);
+		goto free_urb_in;
+	}
+
+	sz->idev = streamzap_init_input_dev(sz);
+	if (!sz->idev)
+		goto input_dev_fail;
+
+	sz->idle = true;
+	sz->decoder_state = PulseSpace;
+	#if 0
+	/* not yet supported, depends on patches from maxim */
+	/* see also: LIRC_GET_REC_RESOLUTION and LIRC_SET_REC_TIMEOUT */
+	sz->timeout_enabled = false;
+	sz->min_timeout = STREAMZAP_TIMEOUT * STREAMZAP_RESOLUTION * 1000;
+	sz->max_timeout = STREAMZAP_TIMEOUT * STREAMZAP_RESOLUTION * 1000;
+	#endif
+
+	init_timer(&sz->delay_timer);
+	sz->delay_timer.function = streamzap_delay_timeout;
+	sz->delay_timer.data = (unsigned long)sz;
+	spin_lock_init(&sz->timer_lock);
+
+	init_timer(&sz->flush_timer);
+	sz->flush_timer.function = streamzap_flush_timeout;
+	sz->flush_timer.data = (unsigned long)sz;
+
+	do_gettimeofday(&sz->signal_start);
+
+	/* Complete final initialisations */
+	usb_fill_int_urb(sz->urb_in, usbdev, pipe, sz->buf_in,
+			 maxp, (usb_complete_t)streamzap_callback,
+			 sz, sz->endpoint->bInterval);
+	sz->urb_in->transfer_dma = sz->dma_in;
+	sz->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	usb_set_intfdata(intf, sz);
+
+	streamzap_start_flush_timer(sz);
+
+	dev_info(sz->dev, "Registered %s on usb%d:%d\n", name,
+		 usbdev->bus->busnum, usbdev->devnum);
+
+	return 0;
+
+input_dev_fail:
+	kfifo_free(&sz->fifo);
+free_urb_in:
+	usb_free_urb(sz->urb_in);
+free_buf_in:
+	usb_free_coherent(usbdev, maxp, sz->buf_in, sz->dma_in);
+free_sz:
+	kfree(sz);
+
+	return retval;
+}
+
+/**
+ * streamzap_disconnect
+ *
+ * Called by the usb core when the device is removed from the system.
+ *
+ * This routine guarantees that the driver will not submit any more urbs
+ * by clearing dev->usbdev.  It is also supposed to terminate any currently
+ * active urbs.  Unfortunately, usb_bulk_msg(), used in streamzap_read(),
+ * does not provide any way to do this.
+ */
+static void streamzap_disconnect(struct usb_interface *interface)
+{
+	struct streamzap_ir *sz = usb_get_intfdata(interface);
+	struct usb_device *usbdev = interface_to_usbdev(interface);
+
+	usb_set_intfdata(interface, NULL);
+
+	if (!sz)
+		return;
+
+	if (sz->flush) {
+		sz->flush = false;
+		del_timer_sync(&sz->flush_timer);
+	}
+
+	streamzap_stop_timer(sz);
+
+	sz->usbdev = NULL;
+	ir_input_unregister(sz->idev);
+	usb_kill_urb(sz->urb_in);
+	usb_free_urb(sz->urb_in);
+	usb_free_coherent(usbdev, sz->buf_in_len, sz->buf_in, sz->dma_in);
+
+	kfree(sz);
+}
+
+static int streamzap_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct streamzap_ir *sz = usb_get_intfdata(intf);
+
+	if (sz->flush) {
+		sz->flush = false;
+		del_timer_sync(&sz->flush_timer);
+	}
+
+	streamzap_stop_timer(sz);
+
+	usb_kill_urb(sz->urb_in);
+
+	return 0;
+}
+
+static int streamzap_resume(struct usb_interface *intf)
+{
+	struct streamzap_ir *sz = usb_get_intfdata(intf);
+
+	if (sz->fifo_initialized)
+		kfifo_reset(&sz->fifo);
+
+	sz->flush_timer.expires = jiffies + HZ;
+	sz->flush = true;
+	add_timer(&sz->flush_timer);
+
+	if (usb_submit_urb(sz->urb_in, GFP_ATOMIC)) {
+		dev_err(sz->dev, "Error sumbiting urb\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/**
+ *	streamzap_init
+ */
+static int __init streamzap_init(void)
+{
+	int ret;
+
+	/* register this driver with the USB subsystem */
+	ret = usb_register(&streamzap_driver);
+	if (ret < 0)
+		printk(KERN_ERR DRIVER_NAME ": usb register failed, "
+		       "result = %d\n", ret);
+
+	return ret;
+}
+
+/**
+ *	streamzap_exit
+ */
+static void __exit streamzap_exit(void)
+{
+	usb_deregister(&streamzap_driver);
+}
+
+
+module_init(streamzap_init);
+module_exit(streamzap_exit);
+
+MODULE_AUTHOR("Jarod Wilson <jarod@wilsonet.com>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Enable debugging messages");
diff --git a/drivers/staging/lirc/Kconfig b/drivers/staging/lirc/Kconfig
index a6b23fb..1b25e6c 100644
--- a/drivers/staging/lirc/Kconfig
+++ b/drivers/staging/lirc/Kconfig
@@ -90,12 +90,6 @@ config LIRC_SIR
 	help
 	  Driver for the SIR IrDA port
 
-config LIRC_STREAMZAP
-	tristate "Streamzap PC Receiver"
-	depends on LIRC_STAGING && USB
-	help
-	  Driver for the Streamzap PC Receiver
-
 config LIRC_TTUSBIR
 	tristate "Technotrend USB IR Receiver"
 	depends on LIRC_STAGING && USB
diff --git a/drivers/staging/lirc/Makefile b/drivers/staging/lirc/Makefile
index 42f8a78..0c7e051 100644
--- a/drivers/staging/lirc/Makefile
+++ b/drivers/staging/lirc/Makefile
@@ -14,7 +14,6 @@ obj-$(CONFIG_LIRC_PARALLEL)	+= lirc_parallel.o
 obj-$(CONFIG_LIRC_SASEM)	+= lirc_sasem.o
 obj-$(CONFIG_LIRC_SERIAL)	+= lirc_serial.o
 obj-$(CONFIG_LIRC_SIR)		+= lirc_sir.o
-obj-$(CONFIG_LIRC_STREAMZAP)	+= lirc_streamzap.o
 obj-$(CONFIG_LIRC_TTUSBIR)	+= lirc_ttusbir.o
 obj-$(CONFIG_LIRC_WPC8679L)	+= lirc_wpc8769l.o
 obj-$(CONFIG_LIRC_ZILOG)	+= lirc_zilog.o
diff --git a/drivers/staging/lirc/lirc_streamzap.c b/drivers/staging/lirc/lirc_streamzap.c
deleted file mode 100644
index 058e29f..0000000
--- a/drivers/staging/lirc/lirc_streamzap.c
+++ /dev/null
@@ -1,741 +0,0 @@
-/*
- * Streamzap Remote Control driver
- *
- * Copyright (c) 2005 Christoph Bartelmus <lirc@bartelmus.de>
- * Copyright (c) 2010 Jarod Wilson <jarod@wilsonet.com>
- *
- * This driver was based on the work of Greg Wickham and Adrian
- * Dewhurst. It was substantially rewritten to support correct signal
- * gaps and now maintains a delay buffer, which is used to present
- * consistent timing behaviour to user space applications. Without the
- * delay buffer an ugly hack would be required in lircd, which can
- * cause sluggish signal decoding in certain situations.
- *
- * Ported to in-kernel ir-core interface by Jarod Wilson
- *
- * This driver is based on the USB skeleton driver packaged with the
- * kernel; copyright (C) 2001-2003 Greg Kroah-Hartman (greg@kroah.com)
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/device.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/usb.h>
-#include <linux/input.h>
-#include <media/ir-core.h>
-
-#define DRIVER_VERSION	"1.60"
-#define DRIVER_NAME	"streamzap"
-#define DRIVER_DESC	"Streamzap Remote Control driver"
-
-#ifdef CONFIG_USB_DEBUG
-static int debug = 1;
-#else
-static int debug;
-#endif
-
-#define USB_STREAMZAP_VENDOR_ID		0x0e9c
-#define USB_STREAMZAP_PRODUCT_ID	0x0000
-
-/* table of devices that work with this driver */
-static struct usb_device_id streamzap_table[] = {
-	/* Streamzap Remote Control */
-	{ USB_DEVICE(USB_STREAMZAP_VENDOR_ID, USB_STREAMZAP_PRODUCT_ID) },
-	/* Terminating entry */
-	{ }
-};
-
-MODULE_DEVICE_TABLE(usb, streamzap_table);
-
-#define STREAMZAP_PULSE_MASK 0xf0
-#define STREAMZAP_SPACE_MASK 0x0f
-#define STREAMZAP_TIMEOUT    0xff
-#define STREAMZAP_RESOLUTION 256
-
-/* number of samples buffered */
-#define SZ_BUF_LEN 128
-
-enum StreamzapDecoderState {
-	PulseSpace,
-	FullPulse,
-	FullSpace,
-	IgnorePulse
-};
-
-/* structure to hold our device specific stuff */
-struct streamzap_ir {
-
-	/* ir-core */
-	struct ir_dev_props *props;
-	struct ir_raw_event rawir;
-
-	/* core device info */
-	struct device *dev;
-	struct input_dev *idev;
-
-	/* usb */
-	struct usb_device	*usbdev;
-	struct usb_interface	*interface;
-	struct usb_endpoint_descriptor *endpoint;
-	struct urb		*urb_in;
-
-	/* buffer & dma */
-	unsigned char		*buf_in;
-	dma_addr_t		dma_in;
-	unsigned int		buf_in_len;
-
-	/* timer used to support delay buffering */
-	struct timer_list	delay_timer;
-	bool			timer_running;
-	spinlock_t		timer_lock;
-	struct timer_list	flush_timer;
-	bool			flush;
-
-	/* delay buffer */
-	struct kfifo fifo;
-	bool fifo_initialized;
-
-	/* track what state we're in */
-	enum StreamzapDecoderState decoder_state;
-	/* tracks whether we are currently receiving some signal */
-	bool			idle;
-	/* sum of signal lengths received since signal start */
-	unsigned long		sum;
-	/* start time of signal; necessary for gap tracking */
-	struct timeval		signal_last;
-	struct timeval		signal_start;
-	/* bool			timeout_enabled; */
-
-	char			name[128];
-	char			phys[64];
-};
-
-
-/* local function prototypes */
-static int streamzap_probe(struct usb_interface *interface,
-			   const struct usb_device_id *id);
-static void streamzap_disconnect(struct usb_interface *interface);
-static void streamzap_callback(struct urb *urb);
-static int streamzap_suspend(struct usb_interface *intf, pm_message_t message);
-static int streamzap_resume(struct usb_interface *intf);
-
-/* usb specific object needed to register this driver with the usb subsystem */
-static struct usb_driver streamzap_driver = {
-	.name =		DRIVER_NAME,
-	.probe =	streamzap_probe,
-	.disconnect =	streamzap_disconnect,
-	.suspend =	streamzap_suspend,
-	.resume =	streamzap_resume,
-	.id_table =	streamzap_table,
-};
-
-static void streamzap_stop_timer(struct streamzap_ir *sz)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&sz->timer_lock, flags);
-	if (sz->timer_running) {
-		sz->timer_running = false;
-		spin_unlock_irqrestore(&sz->timer_lock, flags);
-		del_timer_sync(&sz->delay_timer);
-	} else {
-		spin_unlock_irqrestore(&sz->timer_lock, flags);
-	}
-}
-
-static void streamzap_flush_timeout(unsigned long arg)
-{
-	struct streamzap_ir *sz = (struct streamzap_ir *)arg;
-
-	dev_info(sz->dev, "%s: callback firing\n", __func__);
-
-	/* finally start accepting data */
-	sz->flush = false;
-}
-
-static void streamzap_delay_timeout(unsigned long arg)
-{
-	struct streamzap_ir *sz = (struct streamzap_ir *)arg;
-	struct ir_raw_event rawir = { .pulse = false, .duration = 0 };
-	unsigned long flags;
-	int len, ret;
-	static unsigned long delay;
-	bool wake = false;
-
-	/* deliver data every 10 ms */
-	delay = msecs_to_jiffies(10);
-
-	spin_lock_irqsave(&sz->timer_lock, flags);
-
-	if (kfifo_len(&sz->fifo) > 0) {
-		ret = kfifo_out(&sz->fifo, &rawir, sizeof(rawir));
-		if (ret != sizeof(rawir))
-			dev_err(sz->dev, "Problem w/kfifo_out...\n");
-		ir_raw_event_store(sz->idev, &rawir);
-		wake = true;
-	}
-
-	len = kfifo_len(&sz->fifo);
-	if (len > 0) {
-		while ((len < SZ_BUF_LEN / 2) &&
-		       (len < SZ_BUF_LEN * sizeof(int))) {
-			ret = kfifo_out(&sz->fifo, &rawir, sizeof(rawir));
-			if (ret != sizeof(rawir))
-				dev_err(sz->dev, "Problem w/kfifo_out...\n");
-			ir_raw_event_store(sz->idev, &rawir);
-			wake = true;
-			len = kfifo_len(&sz->fifo);
-		}
-		if (sz->timer_running)
-			mod_timer(&sz->delay_timer, jiffies + delay);
-
-	} else {
-		sz->timer_running = false;
-	}
-
-	if (wake)
-		ir_raw_event_handle(sz->idev);
-
-	spin_unlock_irqrestore(&sz->timer_lock, flags);
-}
-
-static void streamzap_flush_delay_buffer(struct streamzap_ir *sz)
-{
-	struct ir_raw_event rawir = { .pulse = false, .duration = 0 };
-	bool wake = false;
-	int ret;
-
-	while (kfifo_len(&sz->fifo) > 0) {
-		ret = kfifo_out(&sz->fifo, &rawir, sizeof(rawir));
-		if (ret != sizeof(rawir))
-			dev_err(sz->dev, "Problem w/kfifo_out...\n");
-		ir_raw_event_store(sz->idev, &rawir);
-		wake = true;
-	}
-
-	if (wake)
-		ir_raw_event_handle(sz->idev);
-}
-
-static void sz_push(struct streamzap_ir *sz)
-{
-	struct ir_raw_event rawir = { .pulse = false, .duration = 0 };
-	unsigned long flags;
-	int ret;
-
-	spin_lock_irqsave(&sz->timer_lock, flags);
-	if (kfifo_len(&sz->fifo) >= sizeof(int) * SZ_BUF_LEN) {
-		ret = kfifo_out(&sz->fifo, &rawir, sizeof(rawir));
-		if (ret != sizeof(rawir))
-			dev_err(sz->dev, "Problem w/kfifo_out...\n");
-		ir_raw_event_store(sz->idev, &rawir);
-	}
-
-	kfifo_in(&sz->fifo, &sz->rawir, sizeof(rawir));
-
-	if (!sz->timer_running) {
-		sz->delay_timer.expires = jiffies + (HZ / 10);
-		add_timer(&sz->delay_timer);
-		sz->timer_running = true;
-	}
-
-	spin_unlock_irqrestore(&sz->timer_lock, flags);
-}
-
-static void sz_push_full_pulse(struct streamzap_ir *sz,
-			       unsigned char value)
-{
-	if (sz->idle) {
-		long deltv;
-
-		sz->signal_last = sz->signal_start;
-		do_gettimeofday(&sz->signal_start);
-
-		deltv = sz->signal_start.tv_sec - sz->signal_last.tv_sec;
-		sz->rawir.pulse = false;
-		if (deltv > 15) {
-			/* really long time */
-			sz->rawir.duration = IR_MAX_DURATION;
-		} else {
-			sz->rawir.duration = (int)(deltv * 1000000 +
-				sz->signal_start.tv_usec -
-				sz->signal_last.tv_usec);
-			sz->rawir.duration -= sz->sum;
-			sz->rawir.duration *= 1000;
-			sz->rawir.duration &= IR_MAX_DURATION;
-		}
-		dev_dbg(sz->dev, "ls %u\n", sz->rawir.duration);
-		sz_push(sz);
-
-		sz->idle = 0;
-		sz->sum = 0;
-	}
-
-	sz->rawir.pulse = true;
-	sz->rawir.duration = ((int) value) * STREAMZAP_RESOLUTION;
-	sz->rawir.duration += STREAMZAP_RESOLUTION / 2;
-	sz->sum += sz->rawir.duration;
-	sz->rawir.duration *= 1000;
-	sz->rawir.duration &= IR_MAX_DURATION;
-	dev_dbg(sz->dev, "p %u\n", sz->rawir.duration);
-	sz_push(sz);
-}
-
-static void sz_push_half_pulse(struct streamzap_ir *sz,
-			       unsigned char value)
-{
-	sz_push_full_pulse(sz, (value & STREAMZAP_PULSE_MASK) >> 4);
-}
-
-static void sz_push_full_space(struct streamzap_ir *sz,
-			       unsigned char value)
-{
-	sz->rawir.pulse = false;
-	sz->rawir.duration = ((int) value) * STREAMZAP_RESOLUTION;
-	sz->rawir.duration += STREAMZAP_RESOLUTION / 2;
-	sz->sum += sz->rawir.duration;
-	sz->rawir.duration *= 1000;
-	dev_dbg(sz->dev, "s %u\n", sz->rawir.duration);
-	sz_push(sz);
-}
-
-static void sz_push_half_space(struct streamzap_ir *sz,
-			       unsigned long value)
-{
-	sz_push_full_space(sz, value & STREAMZAP_SPACE_MASK);
-}
-
-/**
- * streamzap_callback - usb IRQ handler callback
- *
- * This procedure is invoked on reception of data from
- * the usb remote.
- */
-static void streamzap_callback(struct urb *urb)
-{
-	struct streamzap_ir *sz;
-	unsigned int i;
-	int len;
-	#if 0
-	static int timeout = (((STREAMZAP_TIMEOUT * STREAMZAP_RESOLUTION) &
-				IR_MAX_DURATION) | 0x03000000);
-	#endif
-
-	if (!urb)
-		return;
-
-	sz = urb->context;
-	len = urb->actual_length;
-
-	switch (urb->status) {
-	case -ECONNRESET:
-	case -ENOENT:
-	case -ESHUTDOWN:
-		/*
-		 * this urb is terminated, clean up.
-		 * sz might already be invalid at this point
-		 */
-		dev_err(sz->dev, "urb terminated, status: %d\n", urb->status);
-		return;
-	default:
-		break;
-	}
-
-	dev_dbg(sz->dev, "%s: received urb, len %d\n", __func__, len);
-	if (!sz->flush) {
-		for (i = 0; i < urb->actual_length; i++) {
-			dev_dbg(sz->dev, "%d: %x\n", i,
-				(unsigned char)sz->buf_in[i]);
-			switch (sz->decoder_state) {
-			case PulseSpace:
-				if ((sz->buf_in[i] & STREAMZAP_PULSE_MASK) ==
-				    STREAMZAP_PULSE_MASK) {
-					sz->decoder_state = FullPulse;
-					continue;
-				} else if ((sz->buf_in[i] & STREAMZAP_SPACE_MASK)
-					   == STREAMZAP_SPACE_MASK) {
-					sz_push_half_pulse(sz, sz->buf_in[i]);
-					sz->decoder_state = FullSpace;
-					continue;
-				} else {
-					sz_push_half_pulse(sz, sz->buf_in[i]);
-					sz_push_half_space(sz, sz->buf_in[i]);
-				}
-				break;
-			case FullPulse:
-				sz_push_full_pulse(sz, sz->buf_in[i]);
-				sz->decoder_state = IgnorePulse;
-				break;
-			case FullSpace:
-				if (sz->buf_in[i] == STREAMZAP_TIMEOUT) {
-					sz->idle = 1;
-					streamzap_stop_timer(sz);
-					#if 0
-					if (sz->timeout_enabled) {
-						sz->rawir.pulse = false;
-						sz->rawir.duration = timeout;
-						sz->rawir.duration *= 1000;
-						sz_push(sz);
-					}
-					#endif
-					streamzap_flush_delay_buffer(sz);
-				} else
-					sz_push_full_space(sz, sz->buf_in[i]);
-				sz->decoder_state = PulseSpace;
-				break;
-			case IgnorePulse:
-				if ((sz->buf_in[i]&STREAMZAP_SPACE_MASK) ==
-				    STREAMZAP_SPACE_MASK) {
-					sz->decoder_state = FullSpace;
-					continue;
-				}
-				sz_push_half_space(sz, sz->buf_in[i]);
-				sz->decoder_state = PulseSpace;
-				break;
-			}
-		}
-	}
-
-	usb_submit_urb(urb, GFP_ATOMIC);
-
-	return;
-}
-
-static struct input_dev *streamzap_init_input_dev(struct streamzap_ir *sz)
-{
-	struct input_dev *idev;
-	struct ir_dev_props *props;
-	struct device *dev = sz->dev;
-	int ret;
-
-	idev = input_allocate_device();
-	if (!idev) {
-		dev_err(dev, "remote input dev allocation failed\n");
-		goto idev_alloc_failed;
-	}
-
-	props = kzalloc(sizeof(struct ir_dev_props), GFP_KERNEL);
-	if (!props) {
-		dev_err(dev, "remote ir dev props allocation failed\n");
-		goto props_alloc_failed;
-	}
-
-	snprintf(sz->name, sizeof(sz->name), "Streamzap PC Remote Infrared "
-		 "Receiver (%04x:%04x)",
-		 le16_to_cpu(sz->usbdev->descriptor.idVendor),
-		 le16_to_cpu(sz->usbdev->descriptor.idProduct));
-
-	idev->name = sz->name;
-	usb_make_path(sz->usbdev, sz->phys, sizeof(sz->phys));
-	strlcat(sz->phys, "/input0", sizeof(sz->phys));
-	idev->phys = sz->phys;
-
-	props->priv = sz;
-	props->driver_type = RC_DRIVER_IR_RAW;
-	/* FIXME: not sure about supported protocols, check on this */
-	props->allowed_protos = IR_TYPE_RC5 | IR_TYPE_RC6;
-
-	sz->props = props;
-
-	ret = ir_input_register(idev, RC_MAP_RC5_STREAMZAP, props, DRIVER_NAME);
-	if (ret < 0) {
-		dev_err(dev, "remote input device register failed\n");
-		goto irdev_failed;
-	}
-
-	return idev;
-
-irdev_failed:
-	kfree(props);
-props_alloc_failed:
-	input_free_device(idev);
-idev_alloc_failed:
-	return NULL;
-}
-
-static int streamzap_delay_buf_init(struct streamzap_ir *sz)
-{
-	int ret;
-
-	ret = kfifo_alloc(&sz->fifo, sizeof(int) * SZ_BUF_LEN,
-			  GFP_KERNEL);
-	if (ret == 0)
-		sz->fifo_initialized = 1;
-
-	return ret;
-}
-
-static void streamzap_start_flush_timer(struct streamzap_ir *sz)
-{
-	sz->flush_timer.expires = jiffies + HZ;
-	sz->flush = true;
-	add_timer(&sz->flush_timer);
-
-	sz->urb_in->dev = sz->usbdev;
-	if (usb_submit_urb(sz->urb_in, GFP_ATOMIC))
-		dev_err(sz->dev, "urb submit failed\n");
-}
-
-/**
- *	streamzap_probe
- *
- *	Called by usb-core to associated with a candidate device
- *	On any failure the return value is the ERROR
- *	On success return 0
- */
-static int __devinit streamzap_probe(struct usb_interface *intf,
-				     const struct usb_device_id *id)
-{
-	struct usb_device *usbdev = interface_to_usbdev(intf);
-	struct usb_host_interface *iface_host;
-	struct streamzap_ir *sz = NULL;
-	char buf[63], name[128] = "";
-	int retval = -ENOMEM;
-	int pipe, maxp;
-
-	/* Allocate space for device driver specific data */
-	sz = kzalloc(sizeof(struct streamzap_ir), GFP_KERNEL);
-	if (!sz)
-		return -ENOMEM;
-
-	sz->usbdev = usbdev;
-	sz->interface = intf;
-
-	/* Check to ensure endpoint information matches requirements */
-	iface_host = intf->cur_altsetting;
-
-	if (iface_host->desc.bNumEndpoints != 1) {
-		dev_err(&intf->dev, "%s: Unexpected desc.bNumEndpoints (%d)\n",
-			__func__, iface_host->desc.bNumEndpoints);
-		retval = -ENODEV;
-		goto free_sz;
-	}
-
-	sz->endpoint = &(iface_host->endpoint[0].desc);
-	if ((sz->endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
-	    != USB_DIR_IN) {
-		dev_err(&intf->dev, "%s: endpoint doesn't match input device "
-			"02%02x\n", __func__, sz->endpoint->bEndpointAddress);
-		retval = -ENODEV;
-		goto free_sz;
-	}
-
-	if ((sz->endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
-	    != USB_ENDPOINT_XFER_INT) {
-		dev_err(&intf->dev, "%s: endpoint attributes don't match xfer "
-			"02%02x\n", __func__, sz->endpoint->bmAttributes);
-		retval = -ENODEV;
-		goto free_sz;
-	}
-
-	pipe = usb_rcvintpipe(usbdev, sz->endpoint->bEndpointAddress);
-	maxp = usb_maxpacket(usbdev, pipe, usb_pipeout(pipe));
-
-	if (maxp == 0) {
-		dev_err(&intf->dev, "%s: endpoint Max Packet Size is 0!?!\n",
-			__func__);
-		retval = -ENODEV;
-		goto free_sz;
-	}
-
-	/* Allocate the USB buffer and IRQ URB */
-	sz->buf_in = usb_alloc_coherent(usbdev, maxp, GFP_ATOMIC, &sz->dma_in);
-	if (!sz->buf_in)
-		goto free_sz;
-
-	sz->urb_in = usb_alloc_urb(0, GFP_KERNEL);
-	if (!sz->urb_in)
-		goto free_buf_in;
-
-	sz->dev = &intf->dev;
-	sz->buf_in_len = maxp;
-
-	if (usbdev->descriptor.iManufacturer
-	    && usb_string(usbdev, usbdev->descriptor.iManufacturer,
-			  buf, sizeof(buf)) > 0)
-		strlcpy(name, buf, sizeof(name));
-
-	if (usbdev->descriptor.iProduct
-	    && usb_string(usbdev, usbdev->descriptor.iProduct,
-			  buf, sizeof(buf)) > 0)
-		snprintf(name + strlen(name), sizeof(name) - strlen(name),
-			 " %s", buf);
-
-	retval = streamzap_delay_buf_init(sz);
-	if (retval) {
-		dev_err(&intf->dev, "%s: delay buffer init failed\n", __func__);
-		goto free_urb_in;
-	}
-
-	sz->idev = streamzap_init_input_dev(sz);
-	if (!sz->idev)
-		goto input_dev_fail;
-
-	sz->idle = true;
-	sz->decoder_state = PulseSpace;
-	#if 0
-	/* not yet supported, depends on patches from maxim */
-	/* see also: LIRC_GET_REC_RESOLUTION and LIRC_SET_REC_TIMEOUT */
-	sz->timeout_enabled = false;
-	sz->min_timeout = STREAMZAP_TIMEOUT * STREAMZAP_RESOLUTION * 1000;
-	sz->max_timeout = STREAMZAP_TIMEOUT * STREAMZAP_RESOLUTION * 1000;
-	#endif
-
-	init_timer(&sz->delay_timer);
-	sz->delay_timer.function = streamzap_delay_timeout;
-	sz->delay_timer.data = (unsigned long)sz;
-	spin_lock_init(&sz->timer_lock);
-
-	init_timer(&sz->flush_timer);
-	sz->flush_timer.function = streamzap_flush_timeout;
-	sz->flush_timer.data = (unsigned long)sz;
-
-	do_gettimeofday(&sz->signal_start);
-
-	/* Complete final initialisations */
-	usb_fill_int_urb(sz->urb_in, usbdev, pipe, sz->buf_in,
-			 maxp, (usb_complete_t)streamzap_callback,
-			 sz, sz->endpoint->bInterval);
-	sz->urb_in->transfer_dma = sz->dma_in;
-	sz->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-
-	usb_set_intfdata(intf, sz);
-
-	streamzap_start_flush_timer(sz);
-
-	dev_info(sz->dev, "Registered %s on usb%d:%d\n", name,
-		 usbdev->bus->busnum, usbdev->devnum);
-
-	return 0;
-
-input_dev_fail:
-	kfifo_free(&sz->fifo);
-free_urb_in:
-	usb_free_urb(sz->urb_in);
-free_buf_in:
-	usb_free_coherent(usbdev, maxp, sz->buf_in, sz->dma_in);
-free_sz:
-	kfree(sz);
-
-	return retval;
-}
-
-/**
- * streamzap_disconnect
- *
- * Called by the usb core when the device is removed from the system.
- *
- * This routine guarantees that the driver will not submit any more urbs
- * by clearing dev->usbdev.  It is also supposed to terminate any currently
- * active urbs.  Unfortunately, usb_bulk_msg(), used in streamzap_read(),
- * does not provide any way to do this.
- */
-static void streamzap_disconnect(struct usb_interface *interface)
-{
-	struct streamzap_ir *sz = usb_get_intfdata(interface);
-	struct usb_device *usbdev = interface_to_usbdev(interface);
-
-	usb_set_intfdata(interface, NULL);
-
-	if (!sz)
-		return;
-
-	if (sz->flush) {
-		sz->flush = false;
-		del_timer_sync(&sz->flush_timer);
-	}
-
-	streamzap_stop_timer(sz);
-
-	sz->usbdev = NULL;
-	ir_input_unregister(sz->idev);
-	usb_kill_urb(sz->urb_in);
-	usb_free_urb(sz->urb_in);
-	usb_free_coherent(usbdev, sz->buf_in_len, sz->buf_in, sz->dma_in);
-
-	kfree(sz);
-}
-
-static int streamzap_suspend(struct usb_interface *intf, pm_message_t message)
-{
-	struct streamzap_ir *sz = usb_get_intfdata(intf);
-
-	if (sz->flush) {
-		sz->flush = false;
-		del_timer_sync(&sz->flush_timer);
-	}
-
-	streamzap_stop_timer(sz);
-
-	usb_kill_urb(sz->urb_in);
-
-	return 0;
-}
-
-static int streamzap_resume(struct usb_interface *intf)
-{
-	struct streamzap_ir *sz = usb_get_intfdata(intf);
-
-	if (sz->fifo_initialized)
-		kfifo_reset(&sz->fifo);
-
-	sz->flush_timer.expires = jiffies + HZ;
-	sz->flush = true;
-	add_timer(&sz->flush_timer);
-
-	if (usb_submit_urb(sz->urb_in, GFP_ATOMIC)) {
-		dev_err(sz->dev, "Error sumbiting urb\n");
-		return -EIO;
-	}
-
-	return 0;
-}
-
-/**
- *	streamzap_init
- */
-static int __init streamzap_init(void)
-{
-	int ret;
-
-	/* register this driver with the USB subsystem */
-	ret = usb_register(&streamzap_driver);
-	if (ret < 0)
-		printk(KERN_ERR DRIVER_NAME ": usb register failed, "
-		       "result = %d\n", ret);
-
-	return ret;
-}
-
-/**
- *	streamzap_exit
- */
-static void __exit streamzap_exit(void)
-{
-	usb_deregister(&streamzap_driver);
-}
-
-
-module_init(streamzap_init);
-module_exit(streamzap_exit);
-
-MODULE_AUTHOR("Jarod Wilson <jarod@wilsonet.com>");
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
-
-module_param(debug, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "Enable debugging messages");
