diff --git a/drivers/media/IR/Kconfig b/drivers/media/IR/Kconfig
index 152000d..364514a 100644
--- a/drivers/media/IR/Kconfig
+++ b/drivers/media/IR/Kconfig
@@ -113,6 +113,19 @@ config IR_IMON
 	   To compile this driver as a module, choose M here: the
 	   module will be called imon.
 
+config IR_NUVOTON
+	tristate "Nuvoton w836x7hg Consumer Infrared Transceiver"
+	depends on PNP
+	depends on IR_CORE
+	---help---
+	   Say Y here to enable support for integrated infrared receiver
+	   /transciever made by Nuvoton (formerly Winbond). This chip is
+	   found in the ASRock ION 330HT, as well as assorted Intel
+	   DP55-series motherboards (and of course, possibly others).
+
+	   To compile this driver as a module, choose M here: the
+	   module will be called nuvoton-cir.
+
 config IR_MCEUSB
 	tristate "Windows Media Center Ed. eHome Infrared Transceiver"
 	depends on USB_ARCH_HAS_HCD
diff --git a/drivers/media/IR/Makefile b/drivers/media/IR/Makefile
index 953c6c4..f9574ad 100644
--- a/drivers/media/IR/Makefile
+++ b/drivers/media/IR/Makefile
@@ -17,5 +17,6 @@ obj-$(CONFIG_IR_LIRC_CODEC) += ir-lirc-codec.o
 # stand-alone IR receivers/transmitters
 obj-$(CONFIG_IR_IMON) += imon.o
 obj-$(CONFIG_IR_MCEUSB) += mceusb.o
+obj-$(CONFIG_IR_NUVOTON) += nuvoton-cir.o
 obj-$(CONFIG_IR_ENE) += ene_ir.o
 obj-$(CONFIG_IR_STREAMZAP) += streamzap.o
diff --git a/drivers/media/IR/nuvoton-cir.c b/drivers/media/IR/nuvoton-cir.c
new file mode 100644
index 0000000..1ce9359
--- /dev/null
+++ b/drivers/media/IR/nuvoton-cir.c
@@ -0,0 +1,1216 @@
+/*
+ * Driver for Nuvoton Technology Corporation w83667hg/w83677hg-i CIR
+ *
+ * Copyright (C) 2010 Jarod Wilson <jarod@redhat.com>
+ * Copyright (C) 2009 Nuvoton PS Team
+ *
+ * Special thanks to Nuvoton for providing hardware, spec sheets and
+ * sample code upon which portions of this driver are based. Indirect
+ * thanks also to Maxim Levitsky, whose ene_ir driver this driver is
+ * modeled after.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pnp.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <media/ir-core.h>
+#include <linux/pci_ids.h>
+
+#include "nuvoton-cir.h"
+
+static char *chip_id = "w836x7hg";
+
+/* write val to config reg */
+static inline void nvt_cr_write(struct nvt_dev *nvt, u8 val, u8 reg)
+{
+	outb(reg, nvt->cr_efir);
+	outb(val, nvt->cr_efdr);
+}
+
+/* read val from config reg */
+static inline u8 nvt_cr_read(struct nvt_dev *nvt, u8 reg)
+{
+	outb(reg, nvt->cr_efir);
+	return inb(nvt->cr_efdr);
+}
+
+/* update config register bit without changing other bits */
+static inline void nvt_set_reg_bit(struct nvt_dev *nvt, u8 val, u8 reg)
+{
+	u8 tmp = nvt_cr_read(nvt, reg) | val;
+	nvt_cr_write(nvt, tmp, reg);
+}
+
+/* clear config register bit without changing other bits */
+static inline void nvt_clear_reg_bit(struct nvt_dev *nvt, u8 val, u8 reg)
+{
+	u8 tmp = nvt_cr_read(nvt, reg) & ~val;
+	nvt_cr_write(nvt, tmp, reg);
+}
+
+/* enter extended function mode */
+static inline void nvt_efm_enable(struct nvt_dev *nvt)
+{
+	/* Enabling Extended Function Mode explicitly requires writing 2x */
+	outb(EFER_EFM_ENABLE, nvt->cr_efir);
+	outb(EFER_EFM_ENABLE, nvt->cr_efir);
+}
+
+/* exit extended function mode */
+static inline void nvt_efm_disable(struct nvt_dev *nvt)
+{
+	outb(EFER_EFM_DISABLE, nvt->cr_efir);
+}
+
+/*
+ * When you want to address a specific logical device, write its logical
+ * device number to CR_LOGICAL_DEV_SEL, then enable/disable by writing
+ * 0x1/0x0 respectively to CR_LOGICAL_DEV_EN.
+ */
+static inline void nvt_select_logical_dev(struct nvt_dev *nvt, u8 ldev)
+{
+	outb(CR_LOGICAL_DEV_SEL, nvt->cr_efir);
+	outb(ldev, nvt->cr_efdr);
+}
+
+/* write val to cir config register */
+static inline void nvt_cir_reg_write(struct nvt_dev *nvt, u8 val, u8 offset)
+{
+	outb(val, nvt->cir_addr + offset);
+}
+
+/* read val from cir config register */
+static u8 nvt_cir_reg_read(struct nvt_dev *nvt, u8 offset)
+{
+	u8 val;
+
+	val = inb(nvt->cir_addr + offset);
+
+	return val;
+}
+
+/* write val to cir wake register */
+static inline void nvt_cir_wake_reg_write(struct nvt_dev *nvt,
+					  u8 val, u8 offset)
+{
+	outb(val, nvt->cir_wake_addr + offset);
+}
+
+/* read val from cir wake config register */
+static u8 nvt_cir_wake_reg_read(struct nvt_dev *nvt, u8 offset)
+{
+	u8 val;
+
+	val = inb(nvt->cir_wake_addr + offset);
+
+	return val;
+}
+
+/* dump current cir register contents */
+static void cir_dump_regs(struct nvt_dev *nvt)
+{
+	nvt_efm_enable(nvt);
+	nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR);
+
+	printk("%s: Dump CIR logical device registers:\n", NVT_DRIVER_NAME);
+	printk(" * CR CIR ACTIVE :   0x%x\n",
+	       nvt_cr_read(nvt, CR_LOGICAL_DEV_EN));
+	printk(" * CR CIR BASE ADDR: 0x%x\n",
+	       (nvt_cr_read(nvt, CR_CIR_BASE_ADDR_HI) << 8) |
+		nvt_cr_read(nvt, CR_CIR_BASE_ADDR_LO));
+	printk(" * CR CIR IRQ NUM:   0x%x\n",
+	       nvt_cr_read(nvt, CR_CIR_IRQ_RSRC));
+
+	nvt_efm_disable(nvt);
+
+	printk("%s: Dump CIR registers:\n", NVT_DRIVER_NAME);
+	printk(" * IRCON:     0x%x\n", nvt_cir_reg_read(nvt, CIR_IRCON));
+	printk(" * IRSTS:     0x%x\n", nvt_cir_reg_read(nvt, CIR_IRSTS));
+	printk(" * IREN:      0x%x\n", nvt_cir_reg_read(nvt, CIR_IREN));
+	printk(" * RXFCONT:   0x%x\n", nvt_cir_reg_read(nvt, CIR_RXFCONT));
+	printk(" * CP:        0x%x\n", nvt_cir_reg_read(nvt, CIR_CP));
+	printk(" * CC:        0x%x\n", nvt_cir_reg_read(nvt, CIR_CC));
+	printk(" * SLCH:      0x%x\n", nvt_cir_reg_read(nvt, CIR_SLCH));
+	printk(" * SLCL:      0x%x\n", nvt_cir_reg_read(nvt, CIR_SLCL));
+	printk(" * FIFOCON:   0x%x\n", nvt_cir_reg_read(nvt, CIR_FIFOCON));
+	printk(" * IRFIFOSTS: 0x%x\n", nvt_cir_reg_read(nvt, CIR_IRFIFOSTS));
+	printk(" * SRXFIFO:   0x%x\n", nvt_cir_reg_read(nvt, CIR_SRXFIFO));
+	printk(" * TXFCONT:   0x%x\n", nvt_cir_reg_read(nvt, CIR_TXFCONT));
+	printk(" * STXFIFO:   0x%x\n", nvt_cir_reg_read(nvt, CIR_STXFIFO));
+	printk(" * FCCH:      0x%x\n", nvt_cir_reg_read(nvt, CIR_FCCH));
+	printk(" * FCCL:      0x%x\n", nvt_cir_reg_read(nvt, CIR_FCCL));
+	printk(" * IRFSM:     0x%x\n", nvt_cir_reg_read(nvt, CIR_IRFSM));
+}
+
+/* dump current cir wake register contents */
+static void cir_wake_dump_regs(struct nvt_dev *nvt)
+{
+	u8 i, fifo_len;
+
+	nvt_efm_enable(nvt);
+	nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR_WAKE);
+
+	printk("%s: Dump CIR WAKE logical device registers:\n",
+	       NVT_DRIVER_NAME);
+	printk(" * CR CIR WAKE ACTIVE :   0x%x\n",
+	       nvt_cr_read(nvt, CR_LOGICAL_DEV_EN));
+	printk(" * CR CIR WAKE BASE ADDR: 0x%x\n",
+	       (nvt_cr_read(nvt, CR_CIR_BASE_ADDR_HI) << 8) |
+	        nvt_cr_read(nvt, CR_CIR_BASE_ADDR_LO));
+	printk(" * CR CIR WAKE IRQ NUM:   0x%x\n",
+	       nvt_cr_read(nvt, CR_CIR_IRQ_RSRC));
+
+	nvt_efm_disable(nvt);
+
+	printk("%s: Dump CIR WAKE registers\n", NVT_DRIVER_NAME);
+	printk(" * IRCON:          0x%x\n",
+	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_IRCON));
+	printk(" * IRSTS:          0x%x\n",
+	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_IRSTS));
+	printk(" * IREN:           0x%x\n",
+	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_IREN));
+	printk(" * FIFO CMP DEEP:  0x%x\n",
+	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFO_CMP_DEEP));
+	printk(" * FIFO CMP TOL:   0x%x\n",
+	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFO_CMP_TOL));
+	printk(" * FIFO COUNT:     0x%x\n",
+	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFO_COUNT));
+	printk(" * SLCH:           0x%x\n",
+	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_SLCH));
+	printk(" * SLCL:           0x%x\n",
+	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_SLCL));
+	printk(" * FIFOCON:        0x%x\n",
+	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFOCON));
+	printk(" * SRXFSTS:        0x%x\n",
+	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_SRXFSTS));
+	printk(" * SAMPLE RX FIFO: 0x%x\n",
+	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_SAMPLE_RX_FIFO));
+	printk(" * WR FIFO DATA:   0x%x\n",
+	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_WR_FIFO_DATA));
+	printk(" * RD FIFO ONLY:   0x%x\n",
+	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_RD_FIFO_ONLY));
+	printk(" * RD FIFO ONLY IDX: 0x%x\n",
+	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_RD_FIFO_ONLY_IDX));
+	printk(" * FIFO IGNORE:    0x%x\n",
+	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFO_IGNORE));
+	printk(" * IRFSM:          0x%x\n",
+	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_IRFSM));
+
+	fifo_len = nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFO_COUNT);
+	printk("%s: Dump CIR WAKE FIFO (len %d)\n", NVT_DRIVER_NAME, fifo_len);
+	printk("* Contents = ");
+	for (i = 0; i < fifo_len; i++)
+		printk("%02x ",
+		       nvt_cir_wake_reg_read(nvt, CIR_WAKE_RD_FIFO_ONLY));
+	printk("\n");
+}
+
+/* detect hardware features */
+static int nvt_hw_detect(struct nvt_dev *nvt)
+{
+	unsigned long flags;
+	u8 chip_major, chip_minor;
+	int ret = 0;
+
+	nvt_efm_enable(nvt);
+
+	/* Check if we're wired for the alternate EFER setup */
+	chip_major = nvt_cr_read(nvt, CR_CHIP_ID_HI);
+	if (chip_major == 0xff) {
+		nvt->cr_efir = CR_EFIR2;
+		nvt->cr_efdr = CR_EFDR2;
+		nvt_efm_enable(nvt);
+		chip_major = nvt_cr_read(nvt, CR_CHIP_ID_HI);
+	}
+
+	chip_minor = nvt_cr_read(nvt, CR_CHIP_ID_LO);
+	nvt_dbg("%s: chip id: 0x%02x 0x%02x", chip_id, chip_major, chip_minor);
+
+	if (chip_major != CHIP_ID_HIGH &&
+	    (chip_minor != CHIP_ID_LOW || chip_minor != CHIP_ID_LOW2))
+		ret = -ENODEV;
+
+	nvt_efm_disable(nvt);
+
+	spin_lock_irqsave(&nvt->nvt_lock, flags);
+	nvt->chip_major = chip_major;
+	nvt->chip_minor = chip_minor;
+	spin_unlock_irqrestore(&nvt->nvt_lock, flags);
+
+	return ret;
+}
+
+static void nvt_cir_ldev_init(struct nvt_dev *nvt)
+{
+	u8 val;
+
+	/* output pin selection (Pin95=CIRRX, Pin96=CIRTX1, WB enabled */
+	val = nvt_cr_read(nvt, CR_OUTPUT_PIN_SEL);
+	val &= OUTPUT_PIN_SEL_MASK;
+	val |= (OUTPUT_ENABLE_CIR | OUTPUT_ENABLE_CIRWB);
+	nvt_cr_write(nvt, val, CR_OUTPUT_PIN_SEL);
+
+	/* Select CIR logical device and enable */
+	nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR);
+	nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN);
+
+	nvt_cr_write(nvt, nvt->cir_addr >> 8, CR_CIR_BASE_ADDR_HI);
+	nvt_cr_write(nvt, nvt->cir_addr & 0xff, CR_CIR_BASE_ADDR_LO);
+
+	nvt_cr_write(nvt, nvt->cir_irq, CR_CIR_IRQ_RSRC);
+
+	nvt_dbg("CIR initialized, base io port address: 0x%lx, irq: %d",
+		nvt->cir_addr, nvt->cir_irq);
+}
+
+static void nvt_cir_wake_ldev_init(struct nvt_dev *nvt)
+{
+	/* Select ACPI logical device, enable it and CIR Wake */
+	nvt_select_logical_dev(nvt, LOGICAL_DEV_ACPI);
+	nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN);
+
+	/* Enable CIR Wake via PSOUT# (Pin60) */
+	nvt_set_reg_bit(nvt, CIR_WAKE_ENABLE_BIT, CR_ACPI_CIR_WAKE);
+
+	/* enable cir interrupt of mouse/keyboard IRQ event */
+	nvt_set_reg_bit(nvt, CIR_INTR_MOUSE_IRQ_BIT, CR_ACPI_IRQ_EVENTS);
+
+	/* enable pme interrupt of cir wakeup event */
+	nvt_set_reg_bit(nvt, PME_INTR_CIR_PASS_BIT, CR_ACPI_IRQ_EVENTS2);
+
+	/* Select CIR Wake logical device and enable */
+	nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR_WAKE);
+	nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN);
+
+	nvt_cr_write(nvt, nvt->cir_wake_addr >> 8, CR_CIR_BASE_ADDR_HI);
+	nvt_cr_write(nvt, nvt->cir_wake_addr & 0xff, CR_CIR_BASE_ADDR_LO);
+
+	nvt_cr_write(nvt, nvt->cir_wake_irq, CR_CIR_IRQ_RSRC);
+
+	nvt_dbg("CIR Wake initialized, base io port address: 0x%lx, irq: %d",
+		nvt->cir_wake_addr, nvt->cir_wake_irq);
+}
+
+/* clear out the hardware's cir rx fifo */
+static void nvt_clear_cir_fifo(struct nvt_dev *nvt)
+{
+	u8 val;
+
+	val = nvt_cir_reg_read(nvt, CIR_FIFOCON);
+	nvt_cir_reg_write(nvt, val | CIR_FIFOCON_RXFIFOCLR, CIR_FIFOCON);
+}
+
+/* clear out the hardware's cir wake rx fifo */
+static void nvt_clear_cir_wake_fifo(struct nvt_dev *nvt)
+{
+	u8 val;
+
+	val = nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFOCON);
+	nvt_cir_wake_reg_write(nvt, val | CIR_WAKE_FIFOCON_RXFIFOCLR,
+			       CIR_WAKE_FIFOCON);
+}
+
+/* clear out the hardware's cir tx fifo */
+static void nvt_clear_tx_fifo(struct nvt_dev *nvt)
+{
+	u8 val;
+
+	val = nvt_cir_reg_read(nvt, CIR_FIFOCON);
+	nvt_cir_reg_write(nvt, val | CIR_FIFOCON_TXFIFOCLR, CIR_FIFOCON);
+}
+
+static void nvt_cir_regs_init(struct nvt_dev *nvt)
+{
+	/* set sample limit count (PE interrupt raised when reached) */
+	nvt_cir_reg_write(nvt, CIR_RX_LIMIT_COUNT >> 8, CIR_SLCH);
+	nvt_cir_reg_write(nvt, CIR_RX_LIMIT_COUNT & 0xff, CIR_SLCL);
+
+	/* set fifo irq trigger levels */
+	nvt_cir_reg_write(nvt, CIR_FIFOCON_TX_TRIGGER_LEV |
+			  CIR_FIFOCON_RX_TRIGGER_LEV, CIR_FIFOCON);
+
+	/*
+	 * Enable TX and RX, specify carrier on = low, off = high, and set
+	 * sample period (currently 50us)
+	 */
+	nvt_cir_reg_write(nvt, CIR_IRCON_TXEN | CIR_IRCON_RXEN | CIR_IRCON_RXINV |
+			  CIR_IRCON_SAMPLE_PERIOD_SEL, CIR_IRCON);
+
+	/* clear hardware rx and tx fifos */
+	nvt_clear_cir_fifo(nvt);
+	nvt_clear_tx_fifo(nvt);
+
+	/* clear any and all stray interrupts */
+	nvt_cir_reg_write(nvt, 0xff, CIR_IRSTS);
+
+	/* and finally, enable RX Trigger Level Read and Packet End interrupts */
+	nvt_cir_reg_write(nvt, CIR_IREN_RTR | CIR_IREN_PE, CIR_IREN);
+}
+
+static void nvt_cir_wake_regs_init(struct nvt_dev *nvt)
+{
+	/* set number of bytes needed for wake key comparison (default 67) */
+	nvt_cir_wake_reg_write(nvt, CIR_WAKE_FIFO_LEN, CIR_WAKE_FIFO_CMP_DEEP);
+
+	/* set tolerance/variance allowed per byte during wake compare */
+	nvt_cir_wake_reg_write(nvt, CIR_WAKE_CMP_TOLERANCE,
+			       CIR_WAKE_FIFO_CMP_TOL);
+
+	/* set sample limit count (PE interrupt raised when reached) */
+	nvt_cir_wake_reg_write(nvt, CIR_RX_LIMIT_COUNT >> 8, CIR_WAKE_SLCH);
+	nvt_cir_wake_reg_write(nvt, CIR_RX_LIMIT_COUNT & 0xff, CIR_WAKE_SLCL);
+
+	/* set cir wake fifo rx trigger level (currently 67) */
+	nvt_cir_wake_reg_write(nvt, CIR_WAKE_FIFOCON_RX_TRIGGER_LEV,
+			       CIR_WAKE_FIFOCON);
+
+	/*
+	 * Enable TX and RX, specific carrier on = low, off = high, and set
+	 * sample period (currently 50us)
+	 */
+	nvt_cir_wake_reg_write(nvt, CIR_WAKE_IRCON_MODE0 | CIR_WAKE_IRCON_RXEN |
+			       CIR_WAKE_IRCON_R | CIR_WAKE_IRCON_RXINV |
+			       CIR_WAKE_IRCON_SAMPLE_PERIOD_SEL,
+			       CIR_WAKE_IRCON);
+
+	/* clear cir wake rx fifo */
+	nvt_clear_cir_wake_fifo(nvt);
+
+	/* clear any and all stray interrupts */
+	nvt_cir_wake_reg_write(nvt, 0xff, CIR_WAKE_IRSTS);
+}
+
+static void nvt_enable_wake(struct nvt_dev *nvt)
+{
+	nvt_efm_enable(nvt);
+
+	nvt_select_logical_dev(nvt, LOGICAL_DEV_ACPI);
+	nvt_set_reg_bit(nvt, CIR_WAKE_ENABLE_BIT, CR_ACPI_CIR_WAKE);
+	nvt_set_reg_bit(nvt, CIR_INTR_MOUSE_IRQ_BIT, CR_ACPI_IRQ_EVENTS);
+	nvt_set_reg_bit(nvt, PME_INTR_CIR_PASS_BIT, CR_ACPI_IRQ_EVENTS2);
+
+	nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR_WAKE);
+	nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN);
+
+	nvt_efm_disable(nvt);
+
+	nvt_cir_wake_reg_write(nvt, CIR_WAKE_IRCON_MODE0 | CIR_WAKE_IRCON_RXEN |
+			       CIR_WAKE_IRCON_R | CIR_WAKE_IRCON_RXINV |
+			       CIR_WAKE_IRCON_SAMPLE_PERIOD_SEL, CIR_WAKE_IRCON);
+	nvt_cir_wake_reg_write(nvt, 0xff, CIR_WAKE_IRSTS);
+	nvt_cir_wake_reg_write(nvt, 0, CIR_WAKE_IREN);
+}
+
+/* rx carrier detect only works in learning mode, must be called w/nvt_lock */
+static u32 nvt_rx_carrier_detect(struct nvt_dev *nvt)
+{
+	u32 count, carrier, duration = 0;
+	int i;
+
+	count = nvt_cir_reg_read(nvt, CIR_FCCL) |
+		nvt_cir_reg_read(nvt, CIR_FCCH) << 8;
+
+	for (i = 0; i < nvt->pkts; i++) {
+		if (nvt->buf[i] & BUF_PULSE_BIT)
+			duration += nvt->buf[i] & BUF_LEN_MASK;
+	}
+
+	duration *= SAMPLE_PERIOD;
+
+	if (!count || !duration) {
+		nvt_pr(KERN_NOTICE, "Unable to determine carrier! (c:%u, d:%u)",
+		       count, duration);
+		return 0;
+	}
+
+	carrier = (count * 1000000) / duration;
+
+	if ((carrier > MAX_CARRIER) || (carrier < MIN_CARRIER))
+		nvt_dbg("WTF? Carrier frequency out of range!");
+
+	nvt_dbg("Carrier frequency: %u (count %u, duration %u)",
+		carrier, count, duration);
+
+	return carrier;
+}
+
+/*
+ * set carrier frequency
+ *
+ * set carrier on 2 registers: CP & CC
+ * always set CP as 0x81
+ * set CC by SPEC, CC = 3MHz/carrier - 1
+ */
+static int nvt_set_tx_carrier(void *data, u32 carrier)
+{
+	struct nvt_dev *nvt = data;
+	u16 val;
+
+	nvt_cir_reg_write(nvt, 1, CIR_CP);
+	val = 3000000 / (carrier) - 1;
+	nvt_cir_reg_write(nvt, val & 0xff, CIR_CC);
+
+	nvt_dbg("cp: 0x%x cc: 0x%x\n",
+		nvt_cir_reg_read(nvt, CIR_CP), nvt_cir_reg_read(nvt, CIR_CC));
+
+	return 0;
+}
+
+/*
+ * nvt_tx_ir
+ *
+ * 1) clean TX fifo first (handled by AP)
+ * 2) copy data from user space
+ * 3) disable RX interrupts, enable TX interrupts: TTR & TFU
+ * 4) send 9 packets to TX FIFO to open TTR
+ * in interrupt_handler:
+ * 5) send all data out
+ * go back to write():
+ * 6) disable TX interrupts, re-enable RX interupts
+ *
+ * The key problem of this function is user space data may larger than
+ * driver's data buf length. So nvt_tx_ir() will only copy TX_BUF_LEN data to
+ * buf, and keep current copied data buf num in cur_buf_num. But driver's buf
+ * number may larger than TXFCONT (0xff). So in interrupt_handler, it has to
+ * set TXFCONT as 0xff, until buf_count less than 0xff.
+ */
+static int nvt_tx_ir(void *priv, int *txbuf, u32 n)
+{
+	struct nvt_dev *nvt = priv;
+	unsigned long flags;
+	size_t cur_count;
+	unsigned int i;
+	u8 iren;
+	int ret;
+
+	spin_lock_irqsave(&nvt->tx.lock, flags);
+
+	if (n >= TX_BUF_LEN) {
+		nvt->tx.buf_count = cur_count = TX_BUF_LEN;
+		ret = TX_BUF_LEN;
+	} else {
+		nvt->tx.buf_count = cur_count = n;
+		ret = n;
+	}
+
+	memcpy(nvt->tx.buf, txbuf, nvt->tx.buf_count);
+
+	nvt->tx.cur_buf_num = 0;
+
+	/* save currently enabled interrupts */
+	iren = nvt_cir_reg_read(nvt, CIR_IREN);
+
+	/* now disable all interrupts, save TFU & TTR */
+	nvt_cir_reg_write(nvt, CIR_IREN_TFU | CIR_IREN_TTR, CIR_IREN);
+
+	nvt->tx.tx_state = ST_TX_REPLY;
+
+	nvt_cir_reg_write(nvt, CIR_FIFOCON_TX_TRIGGER_LEV_8 |
+			  CIR_FIFOCON_RXFIFOCLR, CIR_FIFOCON);
+
+	/* trigger TTR interrupt by writing out ones, (yes, it's ugly) */
+	for (i = 0; i < 9; i++)
+		nvt_cir_reg_write(nvt, 0x01, CIR_STXFIFO);
+
+	spin_unlock_irqrestore(&nvt->tx.lock, flags);
+
+	wait_event(nvt->tx.queue, nvt->tx.tx_state == ST_TX_REQUEST);
+
+	spin_lock_irqsave(&nvt->tx.lock, flags);
+	nvt->tx.tx_state = ST_TX_NONE;
+	spin_unlock_irqrestore(&nvt->tx.lock, flags);
+
+	/* restore enabled interrupts to prior state */
+	nvt_cir_reg_write(nvt, iren, CIR_IREN);
+
+	return ret;
+}
+
+/* dump contents of the last rx buffer we got from the hw rx fifo */
+static void nvt_dump_rx_buf(struct nvt_dev *nvt)
+{
+	int i;
+
+	printk("%s (len %d): ", __func__, nvt->pkts);
+	for (i = 0; (i < nvt->pkts) && (i < RX_BUF_LEN); i++)
+		printk("0x%02x ", nvt->buf[i]);
+	printk("\n");
+}
+
+/*
+ * Process raw data in rx driver buffer, store it in raw IR event kfifo,
+ * trigger decode when appropriate.
+ *
+ * We get IR data samples one byte at a time. If the msb is set, its a pulse,
+ * otherwise its a space. The lower 7 bits are the count of SAMPLE_PERIOD
+ * (default 50us) intervals for that pulse/space. A discrete signal is
+ * followed by a series of 0x7f packets, then either 0x7<something> or 0x80
+ * to signal more IR coming (repeats) or end of IR, respectively. We store
+ * sample data in the raw event kfifo until we see 0x7<something> (except f)
+ * or 0x80, at which time, we trigger a decode operation.
+ */
+static void nvt_process_rx_ir_data(struct nvt_dev *nvt)
+{
+	struct ir_raw_event rawir = { .pulse = false, .duration = 0 };
+	unsigned int count;
+	u32 carrier;
+	u8 sample;
+	int i;
+
+	nvt_dbg_verbose("%s firing", __func__);
+
+	if (debug)
+		nvt_dump_rx_buf(nvt);
+
+	if (nvt->carrier_detect_enabled)
+		carrier = nvt_rx_carrier_detect(nvt);
+
+	count = nvt->pkts;
+	nvt_dbg_verbose("Processing buffer of len %d", count);
+
+	for (i = 0; i < count; i++) {
+		nvt->pkts--;
+		sample = nvt->buf[i];
+
+		rawir.pulse = ((sample & BUF_PULSE_BIT) != 0);
+		rawir.duration = (sample & BUF_LEN_MASK)
+					* SAMPLE_PERIOD * 1000;
+
+		if ((sample & BUF_LEN_MASK) == BUF_LEN_MASK) {
+			if (nvt->rawir.pulse == rawir.pulse)
+				nvt->rawir.duration += rawir.duration;
+			else {
+				nvt->rawir.duration = rawir.duration;
+				nvt->rawir.pulse = rawir.pulse;
+			}
+			continue;
+		}
+
+		rawir.duration += nvt->rawir.duration;
+		nvt->rawir.duration = 0;
+		nvt->rawir.pulse = rawir.pulse;
+
+		if (sample == BUF_PULSE_BIT)
+			rawir.pulse = false;
+
+		if (rawir.duration) {
+			nvt_dbg("Storing %s with duration %d",
+				rawir.pulse ? "pulse" : "space",
+				rawir.duration);
+
+			ir_raw_event_store(nvt->rdev, &rawir);
+		}
+
+		/*
+		 * BUF_PULSE_BIT indicates end of IR data, BUF_REPEAT_BYTE
+		 * indicates end of IR signal, but new data incoming. In both
+		 * cases, it means we're ready to call ir_raw_event_handle
+		 */
+		if (sample == BUF_PULSE_BIT || ((sample != BUF_LEN_MASK) &&
+		    (sample & BUF_REPEAT_MASK) == BUF_REPEAT_BYTE))
+			ir_raw_event_handle(nvt->rdev);
+	}
+
+	if (nvt->pkts) {
+		nvt_dbg("Odd, pkts should be 0 now... (its %u)", nvt->pkts);
+		nvt->pkts = 0;
+	}
+
+	nvt_dbg_verbose("%s done", __func__);
+}
+
+/* copy data from hardware rx fifo into driver buffer */
+static void nvt_get_rx_ir_data(struct nvt_dev *nvt)
+{
+	unsigned long flags;
+	u8 fifocount, val;
+	unsigned int b_idx;
+	int i;
+
+	/* Get count of how many bytes to read from RX FIFO */
+	fifocount = nvt_cir_reg_read(nvt, CIR_RXFCONT);
+	/* if we get 0xff, probably means the logical dev is disabled */
+	if (fifocount == 0xff)
+		return;
+	/* this would suggest a fifo overrun, not good... */
+	else if (fifocount > RX_BUF_LEN) {
+		nvt_pr(KERN_WARNING, "fifocount %d over fifo len (%d)!",
+		       fifocount, RX_BUF_LEN);
+		return;
+	}
+
+	nvt_dbg("attempting to fetch %u bytes from hw rx fifo", fifocount);
+
+	spin_lock_irqsave(&nvt->nvt_lock, flags);
+
+	b_idx = nvt->pkts;
+
+	/* This should never happen, but lets check anyway... */
+	if (b_idx + fifocount > RX_BUF_LEN) {
+		nvt_process_rx_ir_data(nvt);
+		b_idx = 0;
+	}
+
+	/* Read fifocount bytes from CIR Sample RX FIFO register */
+	for (i = 0; i < fifocount; i++) {
+		val = nvt_cir_reg_read(nvt, CIR_SRXFIFO);
+		nvt->buf[b_idx + i] = val;
+	}
+
+	nvt->pkts += fifocount;
+	nvt_dbg("%s: pkts now %d", __func__, nvt->pkts);
+
+	nvt_process_rx_ir_data(nvt);
+
+	spin_unlock_irqrestore(&nvt->nvt_lock, flags);
+}
+
+static void nvt_cir_log_irqs(u8 status, u8 iren)
+{
+	nvt_pr(KERN_INFO, "IRQ 0x%02x (IREN 0x%02x) :%s%s%s%s%s%s%s%s%s",
+		status, iren,
+		status & CIR_IRSTS_RDR	? " RDR"	: "",
+		status & CIR_IRSTS_RTR	? " RTR"	: "",
+		status & CIR_IRSTS_PE	? " PE"		: "",
+		status & CIR_IRSTS_RFO	? " RFO"	: "",
+		status & CIR_IRSTS_TE	? " TE"		: "",
+		status & CIR_IRSTS_TTR	? " TTR"	: "",
+		status & CIR_IRSTS_TFU	? " TFU"	: "",
+		status & CIR_IRSTS_GH	? " GH"		: "",
+		status & ~(CIR_IRSTS_RDR | CIR_IRSTS_RTR | CIR_IRSTS_PE |
+			   CIR_IRSTS_RFO | CIR_IRSTS_TE | CIR_IRSTS_TTR |
+			   CIR_IRSTS_TFU | CIR_IRSTS_GH) ? " ?" : "");
+}
+
+static bool nvt_cir_tx_inactive(struct nvt_dev *nvt)
+{
+	unsigned long flags;
+	bool tx_inactive;
+	u8 tx_state;
+
+	spin_lock_irqsave(&nvt->tx.lock, flags);
+	tx_state = nvt->tx.tx_state;
+	spin_unlock_irqrestore(&nvt->tx.lock, flags);
+
+	tx_inactive = (tx_state == ST_TX_NONE);
+
+	return tx_inactive;
+}
+
+/* interrupt service routine for incoming and outgoing CIR data */
+static irqreturn_t nvt_cir_isr(int irq, void *data)
+{
+	struct nvt_dev *nvt = data;
+	u8 status, iren, cur_state;
+	unsigned long flags;
+
+	nvt_dbg_verbose("%s firing", __func__);
+
+	nvt_efm_enable(nvt);
+	nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR);
+	nvt_efm_disable(nvt);
+
+	/*
+	 * Get IR Status register contents. Write 1 to ack/clear
+	 *
+	 * bit: reg name      - description
+	 *   7: CIR_IRSTS_RDR - RX Data Ready
+	 *   6: CIR_IRSTS_RTR - RX FIFO Trigger Level Reach
+	 *   5: CIR_IRSTS_PE  - Packet End
+	 *   4: CIR_IRSTS_RFO - RX FIFO Overrun (RDR will also be set)
+	 *   3: CIR_IRSTS_TE  - TX FIFO Empty
+	 *   2: CIR_IRSTS_TTR - TX FIFO Trigger Level Reach
+	 *   1: CIR_IRSTS_TFU - TX FIFO Underrun
+	 *   0: CIR_IRSTS_GH  - Min Length Detected
+	 */
+	status = nvt_cir_reg_read(nvt, CIR_IRSTS);
+	if (!status) {
+		nvt_dbg_verbose("%s exiting, IRSTS 0x0", __func__);
+		nvt_cir_reg_write(nvt, 0xff, CIR_IRSTS);
+		return IRQ_RETVAL(IRQ_NONE);
+	}
+
+	/* ack/clear all irq flags we've got */
+	nvt_cir_reg_write(nvt, status, CIR_IRSTS);
+	nvt_cir_reg_write(nvt, 0, CIR_IRSTS);
+
+	/* Interrupt may be shared with CIR Wake, bail if CIR not enabled */
+	iren = nvt_cir_reg_read(nvt, CIR_IREN);
+	if (!iren) {
+		nvt_dbg_verbose("%s exiting, CIR not enabled", __func__);
+		return IRQ_RETVAL(IRQ_NONE);
+	}
+
+	if (debug)
+		nvt_cir_log_irqs(status, iren);
+
+	if (status & CIR_IRSTS_RTR) {
+		/* FIXME: add code for study/learn mode */
+		/* We only do rx if not tx'ing */
+		if (nvt_cir_tx_inactive(nvt))
+			nvt_get_rx_ir_data(nvt);
+	}
+
+	if (status & CIR_IRSTS_PE) {
+		if (nvt_cir_tx_inactive(nvt))
+			nvt_get_rx_ir_data(nvt);
+
+		spin_lock_irqsave(&nvt->nvt_lock, flags);
+
+		cur_state = nvt->study_state;
+
+		spin_unlock_irqrestore(&nvt->nvt_lock, flags);
+
+		if (cur_state == ST_STUDY_NONE)
+			nvt_clear_cir_fifo(nvt);
+	}
+
+	if (status & CIR_IRSTS_TE)
+		nvt_clear_tx_fifo(nvt);
+
+	if (status & CIR_IRSTS_TTR) {
+		unsigned int pos, count;
+		u8 tmp;
+
+		spin_lock_irqsave(&nvt->tx.lock, flags);
+
+		pos = nvt->tx.cur_buf_num;
+		count = nvt->tx.buf_count;
+
+		/* Write data into the hardware tx fifo while pos < count */
+		if (pos < count) {
+			nvt_cir_reg_write(nvt, nvt->tx.buf[pos], CIR_STXFIFO);
+			nvt->tx.cur_buf_num++;
+		/* Disable TX FIFO Trigger Level Reach (TTR) interrupt */
+		} else {
+			tmp = nvt_cir_reg_read(nvt, CIR_IREN);
+			nvt_cir_reg_write(nvt, tmp & ~CIR_IREN_TTR, CIR_IREN);
+		}
+
+		spin_unlock_irqrestore(&nvt->tx.lock, flags);
+
+	}
+
+	if (status & CIR_IRSTS_TFU) {
+		spin_lock_irqsave(&nvt->tx.lock, flags);
+		if (nvt->tx.tx_state == ST_TX_REPLY) {
+			nvt->tx.tx_state = ST_TX_REQUEST;
+			wake_up(&nvt->tx.queue);
+		}
+		spin_unlock_irqrestore(&nvt->tx.lock, flags);
+	}
+
+	nvt_dbg_verbose("%s done", __func__);
+	return IRQ_RETVAL(IRQ_HANDLED);
+}
+
+/* Interrupt service routine for CIR Wake */
+static irqreturn_t nvt_cir_wake_isr(int irq, void *data)
+{
+	u8 status, iren, val;
+	struct nvt_dev *nvt = data;
+	unsigned long flags;
+
+	nvt_dbg_wake("%s firing", __func__);
+
+	status = nvt_cir_wake_reg_read(nvt, CIR_WAKE_IRSTS);
+	if (!status)
+		return IRQ_RETVAL(IRQ_NONE);
+
+	if (status & CIR_WAKE_IRSTS_IR_PENDING)
+		nvt_clear_cir_wake_fifo(nvt);
+
+	nvt_cir_wake_reg_write(nvt, status, CIR_WAKE_IRSTS);
+	nvt_cir_wake_reg_write(nvt, 0, CIR_WAKE_IRSTS);
+
+	/* Interrupt may be shared with CIR, bail if Wake not enabled */
+	iren = nvt_cir_wake_reg_read(nvt, CIR_WAKE_IREN);
+	if (!iren) {
+		nvt_dbg_wake("%s exiting, wake not enabled", __func__);
+		return IRQ_RETVAL(IRQ_HANDLED);
+	}
+
+	if ((status & CIR_WAKE_IRSTS_PE) &&
+	    (nvt->wake_state == ST_WAKE_START)) {
+		while (nvt_cir_wake_reg_read(nvt, CIR_WAKE_RD_FIFO_ONLY_IDX)) {
+			val = nvt_cir_wake_reg_read(nvt, CIR_WAKE_RD_FIFO_ONLY);
+			nvt_dbg("setting wake up key: 0x%x", val);
+		}
+
+		nvt_cir_wake_reg_write(nvt, 0, CIR_WAKE_IREN);
+		spin_lock_irqsave(&nvt->nvt_lock, flags);
+		nvt->wake_state = ST_WAKE_FINISH;
+		spin_unlock_irqrestore(&nvt->nvt_lock, flags);
+	}
+
+	nvt_dbg_wake("%s done", __func__);
+	return IRQ_RETVAL(IRQ_HANDLED);
+}
+
+static void nvt_enable_cir(struct nvt_dev *nvt)
+{
+	/* set function enable flags */
+	nvt_cir_reg_write(nvt, CIR_IRCON_TXEN | CIR_IRCON_RXEN |
+			  CIR_IRCON_RXINV | CIR_IRCON_SAMPLE_PERIOD_SEL,
+			  CIR_IRCON);
+
+	nvt_efm_enable(nvt);
+
+	/* enable the CIR logical device */
+	nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR);
+	nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN);
+
+	nvt_efm_disable(nvt);
+
+	/* clear all pending interrupts */
+	nvt_cir_reg_write(nvt, 0xff, CIR_IRSTS);
+
+	/* enable interrupts */
+	nvt_cir_reg_write(nvt, CIR_IREN_RTR | CIR_IREN_PE, CIR_IREN);
+}
+
+static void nvt_disable_cir(struct nvt_dev *nvt)
+{
+	/* disable CIR interrupts */
+	nvt_cir_reg_write(nvt, 0, CIR_IREN);
+
+	/* clear any and all pending interrupts */
+	nvt_cir_reg_write(nvt, 0xff, CIR_IRSTS);
+
+	/* clear all function enable flags */
+	nvt_cir_reg_write(nvt, 0, CIR_IRCON);
+
+	/* clear hardware rx and tx fifos */
+	nvt_clear_cir_fifo(nvt);
+	nvt_clear_tx_fifo(nvt);
+
+	nvt_efm_enable(nvt);
+
+	/* disable the CIR logical device */
+	nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR);
+	nvt_cr_write(nvt, LOGICAL_DEV_DISABLE, CR_LOGICAL_DEV_EN);
+
+	nvt_efm_disable(nvt);
+}
+
+static int nvt_open(void *data)
+{
+	struct nvt_dev *nvt = (struct nvt_dev *)data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&nvt->nvt_lock, flags);
+	nvt->in_use = true;
+	nvt_enable_cir(nvt);
+	spin_unlock_irqrestore(&nvt->nvt_lock, flags);
+
+	return 0;
+}
+
+static void nvt_close(void *data)
+{
+	struct nvt_dev *nvt = (struct nvt_dev *)data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&nvt->nvt_lock, flags);
+	nvt->in_use = false;
+	nvt_disable_cir(nvt);
+	spin_unlock_irqrestore(&nvt->nvt_lock, flags);
+}
+
+/* Allocate memory, probe hardware, and initialize everything */
+static int nvt_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id)
+{
+	struct nvt_dev *nvt = NULL;
+	struct input_dev *rdev = NULL;
+	struct ir_dev_props *props = NULL;
+	int ret = -ENOMEM;
+
+	nvt = kzalloc(sizeof(struct nvt_dev), GFP_KERNEL);
+	if (!nvt)
+		return ret;
+
+	props = kzalloc(sizeof(struct ir_dev_props), GFP_KERNEL);
+	if (!props)
+		goto failure;
+
+	/* input device for IR remote (and tx) */
+	rdev = input_allocate_device();
+	if (!rdev)
+		goto failure;
+
+	ret = -ENODEV;
+	/* validate pnp resources */
+	if (!pnp_port_valid(pdev, 0) ||
+	    pnp_port_len(pdev, 0) < CIR_IOREG_LENGTH) {
+		dev_err(&pdev->dev, "IR PNP Port not valid!\n");
+		goto failure;
+	}
+
+	if (!pnp_irq_valid(pdev, 0)) {
+		dev_err(&pdev->dev, "PNP IRQ not valid!\n");
+		goto failure;
+	}
+
+	if (!pnp_port_valid(pdev, 1) ||
+	    pnp_port_len(pdev, 1) < CIR_IOREG_LENGTH) {
+		dev_err(&pdev->dev, "Wake PNP Port not valid!\n");
+		goto failure;
+	}
+
+	nvt->cir_addr = pnp_port_start(pdev, 0);
+	nvt->cir_irq  = pnp_irq(pdev, 0);
+
+	nvt->cir_wake_addr = pnp_port_start(pdev, 1);
+	/* irq is always shared between cir and cir wake */
+	nvt->cir_wake_irq  = nvt->cir_irq;
+
+	nvt->cr_efir = CR_EFIR;
+	nvt->cr_efdr = CR_EFDR;
+
+	spin_lock_init(&nvt->nvt_lock);
+	spin_lock_init(&nvt->tx.lock);
+
+	ret = -EBUSY;
+	/* now claim resources */
+	if (!request_region(nvt->cir_addr,
+			    CIR_IOREG_LENGTH, NVT_DRIVER_NAME))
+		goto failure;
+
+	if (request_irq(nvt->cir_irq, nvt_cir_isr, IRQF_SHARED,
+			NVT_DRIVER_NAME, (void *)nvt))
+		goto failure;
+
+	if (!request_region(nvt->cir_wake_addr,
+			    CIR_IOREG_LENGTH, NVT_DRIVER_NAME))
+		goto failure;
+
+	if (request_irq(nvt->cir_wake_irq, nvt_cir_wake_isr, IRQF_SHARED,
+			NVT_DRIVER_NAME, (void *)nvt))
+		goto failure;
+
+	pnp_set_drvdata(pdev, nvt);
+	nvt->pdev = pdev;
+
+	init_waitqueue_head(&nvt->tx.queue);
+
+	ret = nvt_hw_detect(nvt);
+	if (ret)
+		goto failure;
+
+	/* Initialize CIR & CIR Wake Logical Devices */
+	nvt_efm_enable(nvt);
+	nvt_cir_ldev_init(nvt);
+	nvt_cir_wake_ldev_init(nvt);
+	nvt_efm_disable(nvt);
+
+	/* Initialize CIR & CIR Wake Config Registers */
+	nvt_cir_regs_init(nvt);
+	nvt_cir_wake_regs_init(nvt);
+
+	/* Set up ir-core props */
+	props->priv = nvt;
+	props->driver_type = RC_DRIVER_IR_RAW;
+	props->allowed_protos = IR_TYPE_ALL;
+	props->open = nvt_open;
+	props->close = nvt_close;
+#if 0
+	props->min_timeout = XYZ;
+	props->max_timeout = XYZ;
+	props->timeout = XYZ;
+	/* rx resolution is hardwired to 50us atm, 1, 25, 100 also possible */
+	props->rx_resolution = XYZ;
+
+	/* tx bits */
+	props->tx_resolution = XYZ;
+#endif
+	props->tx_ir = nvt_tx_ir;
+	props->s_tx_carrier = nvt_set_tx_carrier;
+
+	rdev->name = "Nuvoton w836x7hg Infrared Remote Transceiver";
+	rdev->id.bustype = BUS_HOST;
+	rdev->id.vendor = PCI_VENDOR_ID_WINBOND2;
+	rdev->id.product = nvt->chip_major;
+	rdev->id.version = nvt->chip_minor;
+
+	nvt->props = props;
+	nvt->rdev = rdev;
+
+	device_set_wakeup_capable(&pdev->dev, 1);
+	device_set_wakeup_enable(&pdev->dev, 1);
+
+	ret = ir_input_register(rdev, RC_MAP_RC6_MCE, props, NVT_DRIVER_NAME);
+	if (ret)
+		goto failure;
+
+	nvt_pr(KERN_NOTICE, "driver has been successfully loaded\n");
+	if (debug) {
+		cir_dump_regs(nvt);
+		cir_wake_dump_regs(nvt);
+	}
+
+	return 0;
+
+failure:
+	if (nvt->cir_irq)
+		free_irq(nvt->cir_irq, nvt);
+	if (nvt->cir_addr)
+		release_region(nvt->cir_addr, CIR_IOREG_LENGTH);
+
+	if (nvt->cir_wake_irq)
+		free_irq(nvt->cir_wake_irq, nvt);
+	if (nvt->cir_wake_addr)
+		release_region(nvt->cir_wake_addr, CIR_IOREG_LENGTH);
+
+	input_free_device(rdev);
+	kfree(props);
+	kfree(nvt);
+
+	return ret;
+}
+
+static void __devexit nvt_remove(struct pnp_dev *pdev)
+{
+	struct nvt_dev *nvt = pnp_get_drvdata(pdev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&nvt->nvt_lock, flags);
+	/* disable CIR */
+	nvt_cir_reg_write(nvt, 0, CIR_IREN);
+	nvt_disable_cir(nvt);
+	/* enable CIR Wake (for IR power-on) */
+	nvt_enable_wake(nvt);
+	spin_unlock_irqrestore(&nvt->nvt_lock, flags);
+
+	/* free resources */
+	free_irq(nvt->cir_irq, nvt);
+	free_irq(nvt->cir_wake_irq, nvt);
+	release_region(nvt->cir_addr, CIR_IOREG_LENGTH);
+	release_region(nvt->cir_wake_addr, CIR_IOREG_LENGTH);
+
+	ir_input_unregister(nvt->rdev);
+
+	kfree(nvt->props);
+	kfree(nvt);
+}
+
+static int nvt_suspend(struct pnp_dev *pdev, pm_message_t state)
+{
+	struct nvt_dev *nvt = pnp_get_drvdata(pdev);
+	unsigned long flags;
+
+	nvt_dbg("%s called", __func__);
+
+	/* zero out misc state tracking */
+	spin_lock_irqsave(&nvt->nvt_lock, flags);
+	nvt->study_state = ST_STUDY_NONE;
+	nvt->wake_state = ST_WAKE_NONE;
+	spin_unlock_irqrestore(&nvt->nvt_lock, flags);
+
+	spin_lock_irqsave(&nvt->tx.lock, flags);
+	nvt->tx.tx_state = ST_TX_NONE;
+	spin_unlock_irqrestore(&nvt->tx.lock, flags);
+
+	/* disable all CIR interrupts */
+	nvt_cir_reg_write(nvt, 0, CIR_IREN);
+
+	nvt_efm_enable(nvt);
+
+	/* disable cir logical dev */
+	nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR);
+	nvt_cr_write(nvt, LOGICAL_DEV_DISABLE, CR_LOGICAL_DEV_EN);
+
+	nvt_efm_disable(nvt);
+
+	/* make sure wake is enabled */
+	nvt_enable_wake(nvt);
+
+	return 0;
+}
+
+static int nvt_resume(struct pnp_dev *pdev)
+{
+	int ret = 0;
+	struct nvt_dev *nvt = pnp_get_drvdata(pdev);
+
+	nvt_dbg("%s called", __func__);
+
+	/* open interrupt */
+	nvt_cir_reg_write(nvt, CIR_IREN_RTR | CIR_IREN_PE, CIR_IREN);
+
+	/* Enable CIR logical device */
+	nvt_efm_enable(nvt);
+	nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR);
+	nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN);
+
+	nvt_efm_disable(nvt);
+
+	nvt_cir_regs_init(nvt);
+	nvt_cir_wake_regs_init(nvt);
+
+	return ret;
+}
+
+static void nvt_shutdown(struct pnp_dev *pdev)
+{
+	struct nvt_dev *nvt = pnp_get_drvdata(pdev);
+	nvt_enable_wake(nvt);
+}
+
+static const struct pnp_device_id nvt_ids[] = {
+	{ "WEC0530", 0 },   /* CIR */
+	{ "NTN0530", 0 },   /* CIR for new chip's pnp id*/
+	{ "", 0 },
+};
+
+static struct pnp_driver nvt_driver = {
+	.name		= NVT_DRIVER_NAME,
+	.id_table	= nvt_ids,
+	.flags		= PNP_DRIVER_RES_DO_NOT_CHANGE,
+	.probe		= nvt_probe,
+	.remove		= __devexit_p(nvt_remove),
+	.suspend	= nvt_suspend,
+	.resume		= nvt_resume,
+	.shutdown	= nvt_shutdown,
+};
+
+int nvt_init(void)
+{
+	return pnp_register_driver(&nvt_driver);
+}
+
+void nvt_exit(void)
+{
+	pnp_unregister_driver(&nvt_driver);
+}
+
+module_param(debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Enable debugging output");
+
+MODULE_DEVICE_TABLE(pnp, nvt_ids);
+MODULE_DESCRIPTION("Nuvoton W83667HG-A & W83677HG-I CIR driver");
+
+MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
+MODULE_LICENSE("GPL");
+
+module_init(nvt_init);
+module_exit(nvt_exit);
diff --git a/drivers/media/IR/nuvoton-cir.h b/drivers/media/IR/nuvoton-cir.h
new file mode 100644
index 0000000..12bfe89
--- /dev/null
+++ b/drivers/media/IR/nuvoton-cir.h
@@ -0,0 +1,408 @@
+/*
+ * Driver for Nuvoton Technology Corporation w83667hg/w83677hg-i CIR
+ *
+ * Copyright (C) 2010 Jarod Wilson <jarod@redhat.com>
+ * Copyright (C) 2009 Nuvoton PS Team
+ *
+ * Special thanks to Nuvoton for providing hardware, spec sheets and
+ * sample code upon which portions of this driver are based. Indirect
+ * thanks also to Maxim Levitsky, whose ene_ir driver this driver is
+ * modeled after.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include <linux/spinlock.h>
+#include <asm/ioctl.h>
+
+/* platform driver name to register */
+#define NVT_DRIVER_NAME "nuvoton-cir"
+
+/* debugging module parameter */
+static int debug;
+
+
+#define nvt_pr(level, text, ...) \
+	printk(level KBUILD_MODNAME ": " text, ## __VA_ARGS__)
+
+#define nvt_dbg(text, ...) \
+	if (debug) \
+		printk(KERN_DEBUG \
+			KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__)
+
+#define nvt_dbg_verbose(text, ...) \
+	if (debug > 1) \
+		printk(KERN_DEBUG \
+			KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__)
+
+#define nvt_dbg_wake(text, ...) \
+	if (debug > 2) \
+		printk(KERN_DEBUG \
+			KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__)
+
+
+/*
+ * Original lirc driver said min value of 76, and recommended value of 256
+ * for the buffer length, but then used 2048. Never mind that the size of the
+ * RX FIFO is 32 bytes... So I'm using 32 for RX and 256 for TX atm, but I'm
+ * not sure if maybe that TX value is off by a factor of 8 (bits vs. bytes),
+ * and I don't have TX-capable hardware to test/debug on...
+ */
+#define TX_BUF_LEN 256
+#define RX_BUF_LEN 32
+
+struct nvt_dev {
+	struct pnp_dev *pdev;
+	struct input_dev *rdev;
+	struct ir_dev_props *props;
+	struct ir_raw_event rawir;
+
+	spinlock_t nvt_lock;
+	bool in_use;
+
+	/* for rx */
+	u8 buf[RX_BUF_LEN];
+	unsigned int pkts;
+
+	struct {
+		spinlock_t lock;
+		u8 buf[TX_BUF_LEN];
+		unsigned int buf_count;
+		unsigned int cur_buf_num;
+		wait_queue_head_t queue;
+		u8 tx_state;
+	} tx;
+
+	/* EFER Config register index/data pair */
+	u8 cr_efir;
+	u8 cr_efdr;
+
+	/* hardware I/O settings */
+	unsigned long cir_addr;
+	unsigned long cir_wake_addr;
+	int cir_irq;
+	int cir_wake_irq;
+
+	/* hardware id */
+	u8 chip_major;
+	u8 chip_minor;
+
+	/* hardware features */
+	bool hw_learning_capable;
+	bool hw_tx_capable;
+
+	/* rx settings */
+	bool learning_enabled;
+	bool carrier_detect_enabled;
+
+	/* track cir wake state */
+	u8 wake_state;
+	/* for study */
+	u8 study_state;
+	/* carrier period = 1 / frequency */
+	u32 carrier;
+};
+
+/* study states */
+#define ST_STUDY_NONE      0x0
+#define ST_STUDY_START     0x1
+#define ST_STUDY_CARRIER   0x2
+#define ST_STUDY_ALL_RECV  0x4
+
+/* wake states */
+#define ST_WAKE_NONE	0x0
+#define ST_WAKE_START	0x1
+#define ST_WAKE_FINISH	0x2
+
+/* receive states */
+#define ST_RX_WAIT_7F		0x1
+#define ST_RX_WAIT_HEAD		0x2
+#define ST_RX_WAIT_SILENT_END	0x4
+
+/* send states */
+#define ST_TX_NONE	0x0
+#define ST_TX_REQUEST	0x2
+#define ST_TX_REPLY	0x4
+
+/* buffer packet constants */
+#define BUF_PULSE_BIT	0x80
+#define BUF_LEN_MASK	0x7f
+#define BUF_REPEAT_BYTE	0x70
+#define BUF_REPEAT_MASK	0xf0
+
+/* CIR settings */
+
+/* total length of CIR and CIR WAKE */
+#define CIR_IOREG_LENGTH	0x0f
+
+/* RX limit length, 8 high bits for SLCH, 8 low bits for SLCL (0x7d0 = 2000) */
+#define CIR_RX_LIMIT_COUNT	0x7d0
+
+/* CIR Regs */
+#define CIR_IRCON	0x00
+#define CIR_IRSTS	0x01
+#define CIR_IREN	0x02
+#define CIR_RXFCONT	0x03
+#define CIR_CP		0x04
+#define CIR_CC		0x05
+#define CIR_SLCH	0x06
+#define CIR_SLCL	0x07
+#define CIR_FIFOCON	0x08
+#define CIR_IRFIFOSTS	0x09
+#define CIR_SRXFIFO	0x0a
+#define CIR_TXFCONT	0x0b
+#define CIR_STXFIFO	0x0c
+#define CIR_FCCH	0x0d
+#define CIR_FCCL	0x0e
+#define CIR_IRFSM	0x0f
+
+/* CIR IRCON settings */
+#define CIR_IRCON_RECV	 0x80
+#define CIR_IRCON_WIREN	 0x40
+#define CIR_IRCON_TXEN	 0x20
+#define CIR_IRCON_RXEN	 0x10
+#define CIR_IRCON_WRXINV 0x08
+#define CIR_IRCON_RXINV	 0x04
+
+#define CIR_IRCON_SAMPLE_PERIOD_SEL_1	0x00
+#define CIR_IRCON_SAMPLE_PERIOD_SEL_25	0x01
+#define CIR_IRCON_SAMPLE_PERIOD_SEL_50	0x02
+#define CIR_IRCON_SAMPLE_PERIOD_SEL_100	0x03
+
+/* FIXME: make this a runtime option */
+/* select sample period as 50us */
+#define CIR_IRCON_SAMPLE_PERIOD_SEL	CIR_IRCON_SAMPLE_PERIOD_SEL_50
+
+/* CIR IRSTS settings */
+#define CIR_IRSTS_RDR	0x80
+#define CIR_IRSTS_RTR	0x40
+#define CIR_IRSTS_PE	0x20
+#define CIR_IRSTS_RFO	0x10
+#define CIR_IRSTS_TE	0x08
+#define CIR_IRSTS_TTR	0x04
+#define CIR_IRSTS_TFU	0x02
+#define CIR_IRSTS_GH	0x01
+
+/* CIR IREN settings */
+#define CIR_IREN_RDR	0x80
+#define CIR_IREN_RTR	0x40
+#define CIR_IREN_PE	0x20
+#define CIR_IREN_RFO	0x10
+#define CIR_IREN_TE	0x08
+#define CIR_IREN_TTR	0x04
+#define CIR_IREN_TFU	0x02
+#define CIR_IREN_GH	0x01
+
+/* CIR FIFOCON settings */
+#define CIR_FIFOCON_TXFIFOCLR		0x80
+
+#define CIR_FIFOCON_TX_TRIGGER_LEV_31	0x00
+#define CIR_FIFOCON_TX_TRIGGER_LEV_24	0x10
+#define CIR_FIFOCON_TX_TRIGGER_LEV_16	0x20
+#define CIR_FIFOCON_TX_TRIGGER_LEV_8	0x30
+
+/* FIXME: make this a runtime option */
+/* select TX trigger level as 16 */
+#define CIR_FIFOCON_TX_TRIGGER_LEV	CIR_FIFOCON_TX_TRIGGER_LEV_16
+
+#define CIR_FIFOCON_RXFIFOCLR		0x08
+
+#define CIR_FIFOCON_RX_TRIGGER_LEV_1	0x00
+#define CIR_FIFOCON_RX_TRIGGER_LEV_8	0x01
+#define CIR_FIFOCON_RX_TRIGGER_LEV_16	0x02
+#define CIR_FIFOCON_RX_TRIGGER_LEV_24	0x03
+
+/* FIXME: make this a runtime option */
+/* select RX trigger level as 24 */
+#define CIR_FIFOCON_RX_TRIGGER_LEV	CIR_FIFOCON_RX_TRIGGER_LEV_24
+
+/* CIR IRFIFOSTS settings */
+#define CIR_IRFIFOSTS_IR_PENDING	0x80
+#define CIR_IRFIFOSTS_RX_GS		0x40
+#define CIR_IRFIFOSTS_RX_FTA		0x20
+#define CIR_IRFIFOSTS_RX_EMPTY		0x10
+#define CIR_IRFIFOSTS_RX_FULL		0x08
+#define CIR_IRFIFOSTS_TX_FTA		0x04
+#define CIR_IRFIFOSTS_TX_EMPTY		0x02
+#define CIR_IRFIFOSTS_TX_FULL		0x01
+
+
+/* CIR WAKE UP Regs */
+#define CIR_WAKE_IRCON			0x00
+#define CIR_WAKE_IRSTS			0x01
+#define CIR_WAKE_IREN			0x02
+#define CIR_WAKE_FIFO_CMP_DEEP		0x03
+#define CIR_WAKE_FIFO_CMP_TOL		0x04
+#define CIR_WAKE_FIFO_COUNT		0x05
+#define CIR_WAKE_SLCH			0x06
+#define CIR_WAKE_SLCL			0x07
+#define CIR_WAKE_FIFOCON		0x08
+#define CIR_WAKE_SRXFSTS		0x09
+#define CIR_WAKE_SAMPLE_RX_FIFO		0x0a
+#define CIR_WAKE_WR_FIFO_DATA		0x0b
+#define CIR_WAKE_RD_FIFO_ONLY		0x0c
+#define CIR_WAKE_RD_FIFO_ONLY_IDX	0x0d
+#define CIR_WAKE_FIFO_IGNORE		0x0e
+#define CIR_WAKE_IRFSM			0x0f
+
+/* CIR WAKE UP IRCON settings */
+#define CIR_WAKE_IRCON_DEC_RST		0x80
+#define CIR_WAKE_IRCON_MODE1		0x40
+#define CIR_WAKE_IRCON_MODE0		0x20
+#define CIR_WAKE_IRCON_RXEN		0x10
+#define CIR_WAKE_IRCON_R		0x08
+#define CIR_WAKE_IRCON_RXINV		0x04
+
+/* FIXME/jarod: make this a runtime option */
+/* select a same sample period like cir register */
+#define CIR_WAKE_IRCON_SAMPLE_PERIOD_SEL	CIR_IRCON_SAMPLE_PERIOD_SEL_50
+
+/* CIR WAKE IRSTS Bits */
+#define CIR_WAKE_IRSTS_RDR		0x80
+#define CIR_WAKE_IRSTS_RTR		0x40
+#define CIR_WAKE_IRSTS_PE		0x20
+#define CIR_WAKE_IRSTS_RFO		0x10
+#define CIR_WAKE_IRSTS_GH		0x08
+#define CIR_WAKE_IRSTS_IR_PENDING	0x01
+
+/* CIR WAKE UP IREN Bits */
+#define CIR_WAKE_IREN_RDR		0x80
+#define CIR_WAKE_IREN_RTR		0x40
+#define CIR_WAKE_IREN_PE		0x20
+#define CIR_WAKE_IREN_RFO		0x10
+#define CIR_WAKE_IREN_TE		0x08
+#define CIR_WAKE_IREN_TTR		0x04
+#define CIR_WAKE_IREN_TFU		0x02
+#define CIR_WAKE_IREN_GH		0x01
+
+/* CIR WAKE FIFOCON settings */
+#define CIR_WAKE_FIFOCON_RXFIFOCLR	0x08
+
+#define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_67	0x00
+#define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_66	0x01
+#define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_65	0x02
+#define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_64	0x03
+
+/* FIXME: make this a runtime option */
+/* select WAKE UP RX trigger level as 67 */
+#define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV	CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_67
+
+/* CIR WAKE SRXFSTS settings */
+#define CIR_WAKE_IRFIFOSTS_RX_GS	0x80
+#define CIR_WAKE_IRFIFOSTS_RX_FTA	0x40
+#define CIR_WAKE_IRFIFOSTS_RX_EMPTY	0x20
+#define CIR_WAKE_IRFIFOSTS_RX_FULL	0x10
+
+/* CIR Wake FIFO buffer is 67 bytes long */
+#define CIR_WAKE_FIFO_LEN		67
+/* CIR Wake byte comparison tolerance */
+#define CIR_WAKE_CMP_TOLERANCE		5
+
+/*
+ * Extended Function Enable Registers:
+ *  Extended Function Index Register
+ *  Extended Function Data Register
+ */
+#define CR_EFIR			0x2e
+#define CR_EFDR			0x2f
+
+/* Possible alternate EFER values, depends on how the chip is wired */
+#define CR_EFIR2		0x4e
+#define CR_EFDR2		0x4f
+
+/* Extended Function Mode enable/disable magic values */
+#define EFER_EFM_ENABLE		0x87
+#define EFER_EFM_DISABLE	0xaa
+
+/* Chip IDs found in CR_CHIP_ID_{HI,LO} */
+#define CHIP_ID_HIGH		0xb4
+#define CHIP_ID_LOW		0x72
+#define CHIP_ID_LOW2		0x73
+
+/* Config regs we need to care about */
+#define CR_SOFTWARE_RESET	0x02
+#define CR_LOGICAL_DEV_SEL	0x07
+#define CR_CHIP_ID_HI		0x20
+#define CR_CHIP_ID_LO		0x21
+#define CR_DEV_POWER_DOWN	0x22 /* bit 2 is CIR power, default power on */
+#define CR_OUTPUT_PIN_SEL	0x27
+#define CR_LOGICAL_DEV_EN	0x30 /* valid for all logical devices */
+/* next three regs valid for both the CIR and CIR_WAKE logical devices */
+#define CR_CIR_BASE_ADDR_HI	0x60
+#define CR_CIR_BASE_ADDR_LO	0x61
+#define CR_CIR_IRQ_RSRC		0x70
+/* next three regs valid only for ACPI logical dev */
+#define CR_ACPI_CIR_WAKE	0xe0
+#define CR_ACPI_IRQ_EVENTS	0xf6
+#define CR_ACPI_IRQ_EVENTS2	0xf7
+
+/* Logical devices that we need to care about */
+#define LOGICAL_DEV_LPT		0x01
+#define LOGICAL_DEV_CIR		0x06
+#define LOGICAL_DEV_ACPI	0x0a
+#define LOGICAL_DEV_CIR_WAKE	0x0e
+
+#define LOGICAL_DEV_DISABLE	0x00
+#define LOGICAL_DEV_ENABLE	0x01
+
+#define CIR_WAKE_ENABLE_BIT	0x08
+#define CIR_INTR_MOUSE_IRQ_BIT	0x80
+#define PME_INTR_CIR_PASS_BIT	0x08
+
+#define OUTPUT_PIN_SEL_MASK	0xbc
+#define OUTPUT_ENABLE_CIR	0x01 /* Pin95=CIRRX, Pin96=CIRTX1 */
+#define OUTPUT_ENABLE_CIRWB	0x40 /* enable wide-band sensor */
+
+/* MCE CIR signal length, related on sample period */
+
+/* MCE CIR controller signal length: about 43ms
+ * 43ms / 50us (sample period) * 0.85 (inaccuracy)
+ */
+#define CONTROLLER_BUF_LEN_MIN 830
+
+/* MCE CIR keyboard signal length: about 26ms
+ * 26ms / 50us (sample period) * 0.85 (inaccuracy)
+ */
+#define KEYBOARD_BUF_LEN_MAX 650
+#define KEYBOARD_BUF_LEN_MIN 610
+
+/* MCE CIR mouse signal length: about 24ms
+ * 24ms / 50us (sample period) * 0.85 (inaccuracy)
+ */
+#define MOUSE_BUF_LEN_MIN 565
+
+#define CIR_SAMPLE_PERIOD 50
+#define CIR_SAMPLE_LOW_INACCURACY 0.85
+
+/* MAX silence time that driver will sent to lirc */
+#define MAX_SILENCE_TIME 60000
+
+#if CIR_IRCON_SAMPLE_PERIOD_SEL == CIR_IRCON_SAMPLE_PERIOD_SEL_100
+#define SAMPLE_PERIOD 100
+
+#elif CIR_IRCON_SAMPLE_PERIOD_SEL == CIR_IRCON_SAMPLE_PERIOD_SEL_50
+#define SAMPLE_PERIOD 50
+
+#elif CIR_IRCON_SAMPLE_PERIOD_SEL == CIR_IRCON_SAMPLE_PERIOD_SEL_25
+#define SAMPLE_PERIOD 25
+
+#else
+#define SAMPLE_PERIOD 1
+#endif
+
+/* as VISTA MCE definition, valid carrier value */
+#define MAX_CARRIER 60000
+#define MIN_CARRIER 30000
