@@ -8,7 +8,7 @@ config DVB_DM1105
select DVB_CX24116 if !DVB_FE_CUSTOMISE
select DVB_SI21XX if !DVB_FE_CUSTOMISE
select DVB_DS3000 if !DVB_FE_CUSTOMISE
- depends on IR_CORE
+ depends on RC_CORE
help
Support for cards based on the SDMC DM1105 PCI chip like
DvbWorld 2002
@@ -27,7 +27,7 @@
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/slab.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#include "demux.h"
#include "dmxdev.h"
@@ -1,6 +1,6 @@
config DVB_USB
tristate "Support for various USB DVB devices"
- depends on DVB_CORE && USB && I2C && IR_CORE
+ depends on DVB_CORE && USB && I2C && RC_CORE
help
By enabling this you will be able to choose the various supported
USB1.1 and USB2.0 DVB devices.
@@ -14,7 +14,7 @@
#include <linux/usb.h>
#include <linux/firmware.h>
#include <linux/mutex.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#include "dvb_frontend.h"
#include "dvb_demux.h"
@@ -61,7 +61,7 @@
#define DVB_USB_LOG_PREFIX "LME2510(C)"
#include <linux/usb.h>
#include <linux/usb/input.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#include "dvb-usb.h"
#include "lmedm04.h"
@@ -1,6 +1,6 @@
config MANTIS_CORE
tristate "Mantis/Hopper PCI bridge based devices"
- depends on PCI && I2C && INPUT && IR_CORE
+ depends on PCI && I2C && INPUT && RC_CORE
help
Support for PCI cards based on the Mantis and Hopper PCi bridge.
@@ -18,7 +18,7 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#include <linux/pci.h>
#include "dmxdev.h"
@@ -4,7 +4,7 @@
config SMS_SIANO_MDTV
tristate "Siano SMS1xxx based MDTV receiver"
- depends on DVB_CORE && IR_CORE && HAS_DMA
+ depends on DVB_CORE && RC_CORE && HAS_DMA
---help---
Choose Y or M here if you have MDTV receiver with a Siano chipset.
@@ -28,7 +28,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define __SMS_IR_H__
#include <linux/input.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#define IR_DEFAULT_TIMEOUT 100
@@ -97,7 +97,7 @@ config DVB_BUDGET_CI
select DVB_LNBP21 if !DVB_FE_CUSTOMISE
select DVB_TDA10023 if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMISE
- depends on IR_CORE
+ depends on RC_CORE
help
Support for simple SAA7146 based DVB cards
(so called Budget- or Nova-PCI cards) without onboard
@@ -34,7 +34,7 @@
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#include "budget.h"
@@ -1,16 +1,17 @@
-menuconfig IR_CORE
- tristate "Infrared remote controller adapters"
+menuconfig RC_CORE
+ tristate "Remote Controller adapters"
depends on INPUT
default INPUT
---help---
Enable support for Remote Controllers on Linux. This is
needed in order to support several video capture adapters.
+ Currently, all supported devices use InfraRed.
Enable this option if you have a video capture board even
if you don't need IR, as otherwise, you may not be able to
compile the driver for your adapter.
-if IR_CORE
+if RC_CORE
config LIRC
tristate
@@ -27,7 +28,7 @@ source "drivers/media/rc/keymaps/Kconfig"
config IR_NEC_DECODER
tristate "Enable IR raw decoder for the NEC protocol"
- depends on IR_CORE
+ depends on RC_CORE
select BITREVERSE
default y
@@ -37,7 +38,7 @@ config IR_NEC_DECODER
config IR_RC5_DECODER
tristate "Enable IR raw decoder for the RC-5 protocol"
- depends on IR_CORE
+ depends on RC_CORE
select BITREVERSE
default y
@@ -47,7 +48,7 @@ config IR_RC5_DECODER
config IR_RC6_DECODER
tristate "Enable IR raw decoder for the RC6 protocol"
- depends on IR_CORE
+ depends on RC_CORE
select BITREVERSE
default y
@@ -57,7 +58,7 @@ config IR_RC6_DECODER
config IR_JVC_DECODER
tristate "Enable IR raw decoder for the JVC protocol"
- depends on IR_CORE
+ depends on RC_CORE
select BITREVERSE
default y
@@ -67,7 +68,7 @@ config IR_JVC_DECODER
config IR_SONY_DECODER
tristate "Enable IR raw decoder for the Sony protocol"
- depends on IR_CORE
+ depends on RC_CORE
default y
---help---
@@ -76,7 +77,7 @@ config IR_SONY_DECODER
config IR_RC5_SZ_DECODER
tristate "Enable IR raw decoder for the RC-5 (streamzap) protocol"
- depends on IR_CORE
+ depends on RC_CORE
select BITREVERSE
default y
@@ -88,7 +89,7 @@ config IR_RC5_SZ_DECODER
config IR_LIRC_CODEC
tristate "Enable IR to LIRC bridge"
- depends on IR_CORE
+ depends on RC_CORE
depends on LIRC
default y
@@ -99,7 +100,7 @@ config IR_LIRC_CODEC
config IR_ENE
tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)"
depends on PNP
- depends on IR_CORE
+ depends on RC_CORE
---help---
Say Y here to enable support for integrated infrared receiver
/transceiver made by ENE.
@@ -113,7 +114,7 @@ config IR_ENE
config IR_IMON
tristate "SoundGraph iMON Receiver and Display"
depends on USB_ARCH_HAS_HCD
- depends on IR_CORE
+ depends on RC_CORE
select USB
---help---
Say Y here if you want to use a SoundGraph iMON (aka Antec Veris)
@@ -125,7 +126,7 @@ config IR_IMON
config IR_MCEUSB
tristate "Windows Media Center Ed. eHome Infrared Transceiver"
depends on USB_ARCH_HAS_HCD
- depends on IR_CORE
+ depends on RC_CORE
select USB
---help---
Say Y here if you want to use a Windows Media Center Edition
@@ -137,7 +138,7 @@ config IR_MCEUSB
config IR_NUVOTON
tristate "Nuvoton w836x7hg Consumer Infrared Transceiver"
depends on PNP
- depends on IR_CORE
+ depends on RC_CORE
---help---
Say Y here to enable support for integrated infrared receiver
/transciever made by Nuvoton (formerly Winbond). This chip is
@@ -150,7 +151,7 @@ config IR_NUVOTON
config IR_STREAMZAP
tristate "Streamzap PC Remote IR Receiver"
depends on USB_ARCH_HAS_HCD
- depends on IR_CORE
+ depends on RC_CORE
select USB
---help---
Say Y here if you want to use a Streamzap PC Remote
@@ -162,7 +163,7 @@ config IR_STREAMZAP
config IR_WINBOND_CIR
tristate "Winbond IR remote control"
depends on X86 && PNP
- depends on IR_CORE
+ depends on RC_CORE
select NEW_LEDS
select LEDS_CLASS
select LEDS_TRIGGERS
@@ -176,4 +177,4 @@ config IR_WINBOND_CIR
To compile this driver as a module, choose M here: the module will
be called winbond_cir.
-endif #IR_CORE
+endif #RC_CORE
@@ -2,7 +2,7 @@ rc-core-objs := rc-main.o rc-raw.o
obj-y += keymaps/
-obj-$(CONFIG_IR_CORE) += rc-core.o
+obj-$(CONFIG_RC_CORE) += rc-core.o
obj-$(CONFIG_LIRC) += lirc_dev.o
obj-$(CONFIG_IR_NEC_DECODER) += ir-nec-decoder.o
obj-$(CONFIG_IR_RC5_DECODER) += ir-rc5-decoder.o
@@ -37,7 +37,7 @@
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/slab.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#include "ene_ir.h"
static int sample_period;
@@ -38,7 +38,7 @@
#include <linux/input.h>
#include <linux/usb.h>
#include <linux/usb/input.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#include <linux/time.h>
#include <linux/timer.h>
@@ -16,7 +16,7 @@
#include <linux/wait.h>
#include <media/lirc.h>
#include <media/lirc_dev.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#include "rc-core-priv.h"
#define LIRCBUF_SIZE 256
@@ -1,6 +1,6 @@
config RC_MAP
tristate "Compile Remote Controller keymap modules"
- depends on IR_CORE
+ depends on RC_CORE
default y
---help---
@@ -9,7 +9,7 @@
* (at your option) any later version.
*/
-#include <media/ir-core.h>
+#include <media/rc-core.h>
static struct ir_scancode lirc[] = {
{ },
@@ -36,7 +36,7 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/usb.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#define DRIVER_VERSION "1.91"
#define DRIVER_AUTHOR "Jarod Wilson <jarod@wilsonet.com>"
@@ -32,7 +32,7 @@
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/slab.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#include <linux/pci_ids.h>
#include "nuvoton-cir.h"
@@ -18,7 +18,7 @@
#include <linux/slab.h>
#include <linux/spinlock.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
struct ir_raw_handler {
struct list_head list;
@@ -12,7 +12,7 @@
* GNU General Public License for more details.
*/
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#include <linux/spinlock.h>
#include <linux/delay.h>
#include <linux/input.h>
@@ -1103,11 +1103,11 @@ EXPORT_SYMBOL_GPL(rc_unregister_device);
* Init/exit code for the module. Basically, creates/removes /sys/class/rc
*/
-static int __init ir_core_init(void)
+static int __init rc_core_init(void)
{
int rc = class_register(&ir_input_class);
if (rc) {
- printk(KERN_ERR "ir_core: unable to register rc class\n");
+ printk(KERN_ERR "rc_core: unable to register rc class\n");
return rc;
}
@@ -1118,18 +1118,18 @@ static int __init ir_core_init(void)
return 0;
}
-static void __exit ir_core_exit(void)
+static void __exit rc_core_exit(void)
{
class_unregister(&ir_input_class);
ir_unregister_map(&empty_map);
}
-module_init(ir_core_init);
-module_exit(ir_core_exit);
+module_init(rc_core_init);
+module_exit(rc_core_exit);
-int ir_core_debug; /* ir_debug level (0,1,2) */
-EXPORT_SYMBOL_GPL(ir_core_debug);
-module_param_named(debug, ir_core_debug, int, 0644);
+int rc_core_debug; /* ir_debug level (0,1,2) */
+EXPORT_SYMBOL_GPL(rc_core_debug);
+module_param_named(debug, rc_core_debug, int, 0644);
MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
MODULE_LICENSE("GPL");
@@ -357,7 +357,7 @@ static void init_decoders(struct work_struct *work)
load_lirc_codec();
/* If needed, we may later add some init code. In this case,
- it is needed to change the CONFIG_MODULE test at ir-core.h
+ it is needed to change the CONFIG_MODULE test at rc-core.h
*/
}
#endif
@@ -35,7 +35,7 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/usb.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#define DRIVER_VERSION "1.61"
#define DRIVER_NAME "streamzap"
@@ -50,7 +50,7 @@
#include <linux/io.h>
#include <linux/bitrev.h>
#include <linux/slab.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#define DRVNAME "winbond-cir"
@@ -96,7 +96,7 @@ config VIDEO_HELPER_CHIPS_AUTO
config VIDEO_IR_I2C
tristate "I2C module for IR" if !VIDEO_HELPER_CHIPS_AUTO
- depends on I2C && IR_CORE
+ depends on I2C && RC_CORE
default y
---help---
Most boards have an IR chip directly connected via GPIO. However,
@@ -4,7 +4,7 @@ config VIDEO_BT848
select I2C_ALGOBIT
select VIDEO_BTCX
select VIDEOBUF_DMA_SG
- depends on IR_CORE
+ depends on RC_CORE
select VIDEO_TUNER
select VIDEO_TVEEPROM
select VIDEO_MSP3400 if VIDEO_HELPER_CHIPS_AUTO
@@ -41,7 +41,7 @@
#include <linux/device.h>
#include <media/videobuf-dma-sg.h>
#include <media/tveeprom.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#include <media/ir-kbd-i2c.h>
#include "bt848.h"
@@ -2,7 +2,7 @@ config VIDEO_CX18
tristate "Conexant cx23418 MPEG encoder support"
depends on VIDEO_V4L2 && DVB_CORE && PCI && I2C && EXPERIMENTAL
select I2C_ALGOBIT
- depends on IR_CORE
+ depends on RC_CORE
select VIDEO_TUNER
select VIDEO_TVEEPROM
select VIDEO_CX2341X
@@ -3,7 +3,7 @@ config VIDEO_CX231XX
depends on VIDEO_DEV && I2C
select VIDEO_TUNER
select VIDEO_TVEEPROM
- depends on IR_CORE
+ depends on RC_CORE
select VIDEOBUF_VMALLOC
select VIDEO_CX25840
select VIDEO_CX2341X
@@ -16,7 +16,7 @@ config VIDEO_CX231XX
config VIDEO_CX231XX_RC
bool "Conexant cx231xx Remote Controller additional support"
- depends on IR_CORE
+ depends on RC_CORE
depends on VIDEO_CX231XX
default y
---help---
@@ -34,7 +34,7 @@
#include <media/videobuf-vmalloc.h>
#include <media/v4l2-device.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#include <media/ir-kbd-i2c.h>
#include <media/videobuf-dvb.h>
@@ -5,7 +5,7 @@ config VIDEO_CX23885
select VIDEO_BTCX
select VIDEO_TUNER
select VIDEO_TVEEPROM
- depends on IR_CORE
+ depends on RC_CORE
select VIDEOBUF_DVB
select VIDEOBUF_DMA_SG
select VIDEO_CX25840
@@ -36,7 +36,7 @@
*/
#include <linux/slab.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#include <media/v4l2-subdev.h>
#include "cx23885.h"
@@ -30,7 +30,7 @@
#include <media/tveeprom.h>
#include <media/videobuf-dma-sg.h>
#include <media/videobuf-dvb.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#include "btcx-risc.h"
#include "cx23885-reg.h"
@@ -26,7 +26,7 @@
#include <media/v4l2-device.h>
#include <media/v4l2-chip-ident.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#include "cx23885.h"
@@ -24,7 +24,7 @@
#include <linux/slab.h>
#include <linux/kfifo.h>
#include <media/cx25840.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#include "cx25840-core.h"
@@ -1,6 +1,6 @@
config VIDEO_CX88
tristate "Conexant 2388x (bt878 successor) support"
- depends on VIDEO_DEV && PCI && I2C && IR_CORE
+ depends on VIDEO_DEV && PCI && I2C && RC_CORE
select I2C_ALGOBIT
select VIDEO_BTCX
select VIDEOBUF_DMA_SG
@@ -29,7 +29,7 @@
#include <linux/module.h>
#include "cx88.h"
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#define MODULE_NAME "cx88xx"
@@ -3,7 +3,7 @@ config VIDEO_EM28XX
depends on VIDEO_DEV && I2C
select VIDEO_TUNER
select VIDEO_TVEEPROM
- depends on IR_CORE
+ depends on RC_CORE
select VIDEOBUF_VMALLOC
select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO
select VIDEO_TVP5150 if VIDEO_HELPER_CHIPS_AUTO
@@ -33,7 +33,7 @@
#include <media/videobuf-vmalloc.h>
#include <media/v4l2-device.h>
#include <media/ir-kbd-i2c.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#if defined(CONFIG_VIDEO_EM28XX_DVB) || defined(CONFIG_VIDEO_EM28XX_DVB_MODULE)
#include <media/videobuf-dvb.h>
#endif
@@ -46,7 +46,7 @@
#include <linux/i2c.h>
#include <linux/workqueue.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#include <media/ir-kbd-i2c.h>
/* ----------------------------------------------------------------------- */
@@ -2,7 +2,7 @@ config VIDEO_IVTV
tristate "Conexant cx23416/cx23415 MPEG encoder/decoder support"
depends on VIDEO_V4L2 && PCI && I2C
select I2C_ALGOBIT
- depends on IR_CORE
+ depends on RC_CORE
select VIDEO_TUNER
select VIDEO_TVEEPROM
select VIDEO_CX2341X
@@ -26,7 +26,7 @@ config VIDEO_SAA7134_ALSA
config VIDEO_SAA7134_RC
bool "Philips SAA7134 Remote Controller support"
- depends on IR_CORE
+ depends on RC_CORE
depends on VIDEO_SAA7134
default y
---help---
@@ -37,7 +37,7 @@
#include <media/v4l2-ioctl.h>
#include <media/v4l2-device.h>
#include <media/tuner.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#include <media/ir-kbd-i2c.h>
#include <media/videobuf-dma-sg.h>
#include <sound/core.h>
@@ -3,7 +3,7 @@ config VIDEO_TLG2300
depends on VIDEO_DEV && I2C && SND && DVB_CORE
select VIDEO_TUNER
select VIDEO_TVEEPROM
- depends on IR_CORE
+ depends on RC_CORE
select VIDEOBUF_VMALLOC
select SND_PCM
select VIDEOBUF_DVB
@@ -5,7 +5,7 @@ config VIDEO_CX25821
select I2C_ALGOBIT
select VIDEO_BTCX
select VIDEO_TVEEPROM
- depends on IR_CORE
+ depends on RC_CORE
select VIDEOBUF_DVB
select VIDEOBUF_DMA_SG
select VIDEO_CX25840
@@ -4,7 +4,7 @@ config VIDEO_GO7007
depends on BKL # please fix
depends on SND
select VIDEOBUF_DMA_SG
- depends on IR_CORE
+ depends on RC_CORE
select VIDEO_TUNER
select VIDEO_TVEEPROM
select SND_PCM
@@ -1,6 +1,6 @@
config VIDEO_TM6000
tristate "TV Master TM5600/6000/6010 driver"
- depends on VIDEO_DEV && I2C && INPUT && IR_CORE && USB && EXPERIMENTAL
+ depends on VIDEO_DEV && I2C && INPUT && RC_CORE && USB && EXPERIMENTAL
select VIDEO_TUNER
select MEDIA_TUNER_XC2028
select MEDIA_TUNER_XC5000
@@ -24,7 +24,7 @@
#include <linux/input.h>
#include <linux/usb.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#include "tm6000.h"
#include "tm6000-regs.h"
deleted file mode 100644
@@ -1,211 +0,0 @@
-/*
- * Remote Controller core header
- *
- * Copyright (C) 2009-2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef _IR_CORE
-#define _IR_CORE
-
-#include <linux/spinlock.h>
-#include <linux/kfifo.h>
-#include <linux/time.h>
-#include <linux/timer.h>
-#include <media/rc-map.h>
-
-extern int ir_core_debug;
-#define IR_dprintk(level, fmt, arg...) if (ir_core_debug >= level) \
- printk(KERN_DEBUG "%s: " fmt , __func__, ## arg)
-
-enum rc_driver_type {
- RC_DRIVER_SCANCODE = 0, /* Driver or hardware generates a scancode */
- RC_DRIVER_IR_RAW, /* Needs a Infra-Red pulse/space decoder */
-};
-
-/**
- * struct rc_dev - represents a remote control device
- * @dev: driver model's view of this device
- * @input_name: name of the input child device
- * @input_phys: physical path to the input child device
- * @input_id: id of the input child device (struct input_id)
- * @driver_name: name of the hardware driver which registered this device
- * @map_name: name of the default keymap
- * @rc_tab: current scan/key table
- * @devno: unique remote control device number
- * @raw: additional data for raw pulse/space devices
- * @input_dev: the input child device used to communicate events to userspace
- * @driver_type: specifies if protocol decoding is done in hardware or software
- * @idle: used to keep track of RX state
- * @allowed_protos: bitmask with the supported IR_TYPE_* protocols
- * @scanmask: some hardware decoders are not capable of providing the full
- * scancode to the application. As this is a hardware limit, we can't do
- * anything with it. Yet, as the same keycode table can be used with other
- * devices, a mask is provided to allow its usage. Drivers should generally
- * leave this field in blank
- * @priv: driver-specific data
- * @keylock: protects the remaining members of the struct
- * @keypressed: whether a key is currently pressed
- * @keyup_jiffies: time (in jiffies) when the current keypress should be released
- * @timer_keyup: timer for releasing a keypress
- * @last_keycode: keycode of last keypress
- * @last_scancode: scancode of last keypress
- * @last_toggle: toggle value of last command
- * @timeout: optional time after which device stops sending data
- * @min_timeout: minimum timeout supported by device
- * @max_timeout: maximum timeout supported by device
- * @rx_resolution : resolution (in ns) of input sampler
- * @tx_resolution: resolution (in ns) of output sampler
- * @change_protocol: allow changing the protocol used on hardware decoders
- * @open: callback to allow drivers to enable polling/irq when IR input device
- * is opened.
- * @close: callback to allow drivers to disable polling/irq when IR input device
- * is opened.
- * @s_tx_mask: set transmitter mask (for devices with multiple tx outputs)
- * @s_tx_carrier: set transmit carrier frequency
- * @s_tx_duty_cycle: set transmit duty cycle (0% - 100%)
- * @s_rx_carrier: inform driver about carrier it is expected to handle
- * @tx_ir: transmit IR
- * @s_idle: enable/disable hardware idle mode, upon which,
- * device doesn't interrupt host until it sees IR pulses
- * @s_learning_mode: enable wide band receiver used for learning
- * @s_carrier_report: enable carrier reports
- */
-struct rc_dev {
- struct device dev;
- const char *input_name;
- const char *input_phys;
- struct input_id input_id;
- char *driver_name;
- const char *map_name;
- struct ir_scancode_table rc_tab;
- unsigned long devno;
- struct ir_raw_event_ctrl *raw;
- struct input_dev *input_dev;
- enum rc_driver_type driver_type;
- bool idle;
- u64 allowed_protos;
- u32 scanmask;
- void *priv;
- spinlock_t keylock;
- bool keypressed;
- unsigned long keyup_jiffies;
- struct timer_list timer_keyup;
- u32 last_keycode;
- u32 last_scancode;
- u8 last_toggle;
- u32 timeout;
- u32 min_timeout;
- u32 max_timeout;
- u32 rx_resolution;
- u32 tx_resolution;
- int (*change_protocol)(struct rc_dev *dev, u64 ir_type);
- int (*open)(struct rc_dev *dev);
- void (*close)(struct rc_dev *dev);
- int (*s_tx_mask)(struct rc_dev *dev, u32 mask);
- int (*s_tx_carrier)(struct rc_dev *dev, u32 carrier);
- int (*s_tx_duty_cycle)(struct rc_dev *dev, u32 duty_cycle);
- int (*s_rx_carrier_range)(struct rc_dev *dev, u32 min, u32 max);
- int (*tx_ir)(struct rc_dev *dev, int *txbuf, u32 n);
- void (*s_idle)(struct rc_dev *dev, bool enable);
- int (*s_learning_mode)(struct rc_dev *dev, int enable);
- int (*s_carrier_report) (struct rc_dev *dev, int enable);
-};
-
-enum raw_event_type {
- IR_SPACE = (1 << 0),
- IR_PULSE = (1 << 1),
- IR_START_EVENT = (1 << 2),
- IR_STOP_EVENT = (1 << 3),
-};
-
-#define to_rc_dev(d) container_of(d, struct rc_dev, dev)
-
-
-void ir_repeat(struct rc_dev *dev);
-void ir_keydown(struct rc_dev *dev, int scancode, u8 toggle);
-void ir_keydown_notimeout(struct rc_dev *dev, int scancode, u8 toggle);
-void ir_keyup(struct rc_dev *dev);
-u32 ir_g_keycode_from_table(struct rc_dev *dev, u32 scancode);
-
-/* From ir-raw-event.c */
-struct ir_raw_event {
- union {
- u32 duration;
-
- struct {
- u32 carrier;
- u8 duty_cycle;
- };
- };
-
- unsigned pulse:1;
- unsigned reset:1;
- unsigned timeout:1;
- unsigned carrier_report:1;
-};
-
-#define DEFINE_IR_RAW_EVENT(event) \
- struct ir_raw_event event = { \
- { .duration = 0 } , \
- .pulse = 0, \
- .reset = 0, \
- .timeout = 0, \
- .carrier_report = 0 }
-
-static inline void init_ir_raw_event(struct ir_raw_event *ev)
-{
- memset(ev, 0, sizeof(*ev));
-}
-
-#define IR_MAX_DURATION 0xFFFFFFFF /* a bit more than 4 seconds */
-
-struct rc_dev *rc_allocate_device(void);
-void rc_free_device(struct rc_dev *dev);
-int rc_register_device(struct rc_dev *dev);
-void rc_unregister_device(struct rc_dev *dev);
-
-void ir_raw_event_handle(struct rc_dev *dev);
-int ir_raw_event_store(struct rc_dev *dev, struct ir_raw_event *ev);
-int ir_raw_event_store_edge(struct rc_dev *dev, enum raw_event_type type);
-int ir_raw_event_store_with_filter(struct rc_dev *dev,
- struct ir_raw_event *ev);
-void ir_raw_event_set_idle(struct rc_dev *dev, bool idle);
-
-static inline void ir_raw_event_reset(struct rc_dev *dev)
-{
- DEFINE_IR_RAW_EVENT(ev);
- ev.reset = true;
-
- ir_raw_event_store(dev, &ev);
- ir_raw_event_handle(dev);
-}
-
-
-/* extract mask bits out of data and pack them into the result */
-static inline u32 ir_extract_bits(u32 data, u32 mask)
-{
- u32 vbit = 1, value = 0;
-
- do {
- if (mask & 1) {
- if (data & 1)
- value |= vbit;
- vbit <<= 1;
- }
- data >>= 1;
- } while (mask >>= 1);
-
- return value;
-}
-
-
-#endif /* _IR_CORE */
@@ -1,7 +1,7 @@
#ifndef _IR_I2C
#define _IR_I2C
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#define DEFAULT_POLLING_INTERVAL 100 /* ms */
new file mode 100644
@@ -0,0 +1,211 @@
+/*
+ * Remote Controller core header
+ *
+ * Copyright (C) 2009-2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _IR_CORE
+#define _IR_CORE
+
+#include <linux/spinlock.h>
+#include <linux/kfifo.h>
+#include <linux/time.h>
+#include <linux/timer.h>
+#include <media/rc-map.h>
+
+extern int rc_core_debug;
+#define IR_dprintk(level, fmt, arg...) if (rc_core_debug >= level) \
+ printk(KERN_DEBUG "%s: " fmt , __func__, ## arg)
+
+enum rc_driver_type {
+ RC_DRIVER_SCANCODE = 0, /* Driver or hardware generates a scancode */
+ RC_DRIVER_IR_RAW, /* Needs a Infra-Red pulse/space decoder */
+};
+
+/**
+ * struct rc_dev - represents a remote control device
+ * @dev: driver model's view of this device
+ * @input_name: name of the input child device
+ * @input_phys: physical path to the input child device
+ * @input_id: id of the input child device (struct input_id)
+ * @driver_name: name of the hardware driver which registered this device
+ * @map_name: name of the default keymap
+ * @rc_tab: current scan/key table
+ * @devno: unique remote control device number
+ * @raw: additional data for raw pulse/space devices
+ * @input_dev: the input child device used to communicate events to userspace
+ * @driver_type: specifies if protocol decoding is done in hardware or software
+ * @idle: used to keep track of RX state
+ * @allowed_protos: bitmask with the supported IR_TYPE_* protocols
+ * @scanmask: some hardware decoders are not capable of providing the full
+ * scancode to the application. As this is a hardware limit, we can't do
+ * anything with it. Yet, as the same keycode table can be used with other
+ * devices, a mask is provided to allow its usage. Drivers should generally
+ * leave this field in blank
+ * @priv: driver-specific data
+ * @keylock: protects the remaining members of the struct
+ * @keypressed: whether a key is currently pressed
+ * @keyup_jiffies: time (in jiffies) when the current keypress should be released
+ * @timer_keyup: timer for releasing a keypress
+ * @last_keycode: keycode of last keypress
+ * @last_scancode: scancode of last keypress
+ * @last_toggle: toggle value of last command
+ * @timeout: optional time after which device stops sending data
+ * @min_timeout: minimum timeout supported by device
+ * @max_timeout: maximum timeout supported by device
+ * @rx_resolution : resolution (in ns) of input sampler
+ * @tx_resolution: resolution (in ns) of output sampler
+ * @change_protocol: allow changing the protocol used on hardware decoders
+ * @open: callback to allow drivers to enable polling/irq when IR input device
+ * is opened.
+ * @close: callback to allow drivers to disable polling/irq when IR input device
+ * is opened.
+ * @s_tx_mask: set transmitter mask (for devices with multiple tx outputs)
+ * @s_tx_carrier: set transmit carrier frequency
+ * @s_tx_duty_cycle: set transmit duty cycle (0% - 100%)
+ * @s_rx_carrier: inform driver about carrier it is expected to handle
+ * @tx_ir: transmit IR
+ * @s_idle: enable/disable hardware idle mode, upon which,
+ * device doesn't interrupt host until it sees IR pulses
+ * @s_learning_mode: enable wide band receiver used for learning
+ * @s_carrier_report: enable carrier reports
+ */
+struct rc_dev {
+ struct device dev;
+ const char *input_name;
+ const char *input_phys;
+ struct input_id input_id;
+ char *driver_name;
+ const char *map_name;
+ struct ir_scancode_table rc_tab;
+ unsigned long devno;
+ struct ir_raw_event_ctrl *raw;
+ struct input_dev *input_dev;
+ enum rc_driver_type driver_type;
+ bool idle;
+ u64 allowed_protos;
+ u32 scanmask;
+ void *priv;
+ spinlock_t keylock;
+ bool keypressed;
+ unsigned long keyup_jiffies;
+ struct timer_list timer_keyup;
+ u32 last_keycode;
+ u32 last_scancode;
+ u8 last_toggle;
+ u32 timeout;
+ u32 min_timeout;
+ u32 max_timeout;
+ u32 rx_resolution;
+ u32 tx_resolution;
+ int (*change_protocol)(struct rc_dev *dev, u64 ir_type);
+ int (*open)(struct rc_dev *dev);
+ void (*close)(struct rc_dev *dev);
+ int (*s_tx_mask)(struct rc_dev *dev, u32 mask);
+ int (*s_tx_carrier)(struct rc_dev *dev, u32 carrier);
+ int (*s_tx_duty_cycle)(struct rc_dev *dev, u32 duty_cycle);
+ int (*s_rx_carrier_range)(struct rc_dev *dev, u32 min, u32 max);
+ int (*tx_ir)(struct rc_dev *dev, int *txbuf, u32 n);
+ void (*s_idle)(struct rc_dev *dev, bool enable);
+ int (*s_learning_mode)(struct rc_dev *dev, int enable);
+ int (*s_carrier_report) (struct rc_dev *dev, int enable);
+};
+
+enum raw_event_type {
+ IR_SPACE = (1 << 0),
+ IR_PULSE = (1 << 1),
+ IR_START_EVENT = (1 << 2),
+ IR_STOP_EVENT = (1 << 3),
+};
+
+#define to_rc_dev(d) container_of(d, struct rc_dev, dev)
+
+
+void ir_repeat(struct rc_dev *dev);
+void ir_keydown(struct rc_dev *dev, int scancode, u8 toggle);
+void ir_keydown_notimeout(struct rc_dev *dev, int scancode, u8 toggle);
+void ir_keyup(struct rc_dev *dev);
+u32 ir_g_keycode_from_table(struct rc_dev *dev, u32 scancode);
+
+/* From ir-raw-event.c */
+struct ir_raw_event {
+ union {
+ u32 duration;
+
+ struct {
+ u32 carrier;
+ u8 duty_cycle;
+ };
+ };
+
+ unsigned pulse:1;
+ unsigned reset:1;
+ unsigned timeout:1;
+ unsigned carrier_report:1;
+};
+
+#define DEFINE_IR_RAW_EVENT(event) \
+ struct ir_raw_event event = { \
+ { .duration = 0 } , \
+ .pulse = 0, \
+ .reset = 0, \
+ .timeout = 0, \
+ .carrier_report = 0 }
+
+static inline void init_ir_raw_event(struct ir_raw_event *ev)
+{
+ memset(ev, 0, sizeof(*ev));
+}
+
+#define IR_MAX_DURATION 0xFFFFFFFF /* a bit more than 4 seconds */
+
+struct rc_dev *rc_allocate_device(void);
+void rc_free_device(struct rc_dev *dev);
+int rc_register_device(struct rc_dev *dev);
+void rc_unregister_device(struct rc_dev *dev);
+
+void ir_raw_event_handle(struct rc_dev *dev);
+int ir_raw_event_store(struct rc_dev *dev, struct ir_raw_event *ev);
+int ir_raw_event_store_edge(struct rc_dev *dev, enum raw_event_type type);
+int ir_raw_event_store_with_filter(struct rc_dev *dev,
+ struct ir_raw_event *ev);
+void ir_raw_event_set_idle(struct rc_dev *dev, bool idle);
+
+static inline void ir_raw_event_reset(struct rc_dev *dev)
+{
+ DEFINE_IR_RAW_EVENT(ev);
+ ev.reset = true;
+
+ ir_raw_event_store(dev, &ev);
+ ir_raw_event_handle(dev);
+}
+
+
+/* extract mask bits out of data and pack them into the result */
+static inline u32 ir_extract_bits(u32 data, u32 mask)
+{
+ u32 vbit = 1, value = 0;
+
+ do {
+ if (mask & 1) {
+ if (data & 1)
+ value |= vbit;
+ vbit <<= 1;
+ }
+ data >>= 1;
+ } while (mask >>= 1);
+
+ return value;
+}
+
+
+#endif /* _IR_CORE */