@@ -5179,18 +5179,8 @@ struct saa7134_board saa7134_boards[] = {
[SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG] = {
.name = "Kworld PCI SBTVD/ISDB-T Full-Seg Hybrid",
.audio_clock = 0x00187de7,
-#if 0
- /*
- * FIXME: Analog mode doesn't work, if digital is enabled. The proper
- * fix is to use tda8290 driver, but Kworld seems to use an
- * unsupported version of tda8295.
- */
- .tuner_type = TUNER_NXP_TDA18271, /* TUNER_PHILIPS_TDA8290 */
- .tuner_addr = 0x60,
-#else
- .tuner_type = UNSET,
+ .tuner_type = TUNER_PHILIPS_TDA8290,
.tuner_addr = ADDR_UNSET,
-#endif
.radio_type = UNSET,
.radio_addr = ADDR_UNSET,
.gpiomask = 0x8e054000,
@@ -5201,6 +5191,7 @@ struct saa7134_board saa7134_boards[] = {
.vmux = 1,
.amux = TV,
.tv = 1,
+ .gpio = 0x4000,
#if 0 /* FIXME */
}, {
.name = name_comp1,
@@ -7659,36 +7650,11 @@ int saa7134_board_init2(struct saa7134_dev *dev)
break;
}
case SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG:
- {
- struct i2c_msg msg = { .addr = 0x4b, .flags = 0 };
- int i;
- static u8 buffer[][2] = {
- {0x30, 0x31},
- {0xff, 0x00},
- {0x41, 0x03},
- {0x41, 0x1a},
- {0xff, 0x02},
- {0x34, 0x00},
- {0x45, 0x97},
- {0x45, 0xc1},
- };
saa_writel(SAA7134_GPIO_GPMODE0 >> 2, 0x4000);
saa_writel(SAA7134_GPIO_GPSTATUS0 >> 2, 0x4000);
- /*
- * FIXME: identify what device is at addr 0x4b and what means
- * this initialization
- */
- for (i = 0; i < ARRAY_SIZE(buffer); i++) {
- msg.buf = &buffer[i][0];
- msg.len = ARRAY_SIZE(buffer[0]);
- if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1)
- printk(KERN_WARNING
- "%s: Unable to enable tuner(%i).\n",
- dev->name, i);
- }
+ saa7134_set_gpio(dev, 27, 0);
break;
- }
} /* switch() */
/* initialize tuner */
@@ -236,7 +236,7 @@ static struct tda18271_std_map mb86a20s_tda18271_std_map = {
static struct tda18271_config kworld_tda18271_config = {
.std_map = &mb86a20s_tda18271_std_map,
- .gate = TDA18271_GATE_DIGITAL,
+ .gate = TDA18271_GATE_ANALOG,
};
static const struct mb86a20s_config kworld_mb86a20s_config = {
@@ -623,37 +623,6 @@ static struct tda827x_config tda827x_cfg_2_sw42 = {
/* ------------------------------------------------------------------ */
-static int __kworld_sbtvd_i2c_gate_ctrl(struct saa7134_dev *dev, int enable)
-{
- unsigned char initmsg[] = {0x45, 0x97};
- unsigned char msg_enable[] = {0x45, 0xc1};
- unsigned char msg_disable[] = {0x45, 0x81};
- struct i2c_msg msg = {.addr = 0x4b, .flags = 0, .buf = initmsg, .len = 2};
-
- if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) {
- wprintk("could not access the I2C gate\n");
- return -EIO;
- }
- if (enable)
- msg.buf = msg_enable;
- else
- msg.buf = msg_disable;
- if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) {
- wprintk("could not access the I2C gate\n");
- return -EIO;
- }
- msleep(20);
- return 0;
-}
-static int kworld_sbtvd_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
-{
- struct saa7134_dev *dev = fe->dvb->priv;
-
- return __kworld_sbtvd_i2c_gate_ctrl(dev, enable);
-}
-
-/* ------------------------------------------------------------------ */
-
static struct tda1004x_config tda827x_lifeview_config = {
.demod_address = 0x08,
.invert = 1,
@@ -1660,7 +1629,6 @@ static int dvb_init(struct saa7134_dev *dev)
}
break;
case SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG:
- __kworld_sbtvd_i2c_gate_ctrl(dev, 0);
saa_writel(SAA7134_GPIO_GPMODE0 >> 2, 0x14000);
saa_writel(SAA7134_GPIO_GPSTATUS0 >> 2, 0x14000);
msleep(20);
@@ -1670,16 +1638,10 @@ static int dvb_init(struct saa7134_dev *dev)
fe0->dvb.frontend = dvb_attach(mb86a20s_attach,
&kworld_mb86a20s_config,
&dev->i2c_adap);
- __kworld_sbtvd_i2c_gate_ctrl(dev, 1);
if (fe0->dvb.frontend != NULL) {
dvb_attach(tda18271_attach, fe0->dvb.frontend,
0x60, &dev->i2c_adap,
&kworld_tda18271_config);
- /*
- * Only after success, it can initialize the gate, otherwise
- * an OOPS will hit, due to kfree(fe0->dvb.frontend)
- */
- fe0->dvb.frontend->ops.i2c_gate_ctrl = kworld_sbtvd_i2c_gate_ctrl;
}
break;
default: