@@ -154,10 +154,10 @@ static void bttv_input_timer(unsigned long data)
* testing.
*/
-#define RC5_START(x) (((x) >> 12) & 3)
-#define RC5_TOGGLE(x) (((x) >> 11) & 1)
-#define RC5_ADDR(x) (((x) >> 6) & 31)
-#define RC5_INSTR(x) ((x) & 63)
+#define RC5_START(x) (((x) >> 12) & 0x03)
+#define RC5_TOGGLE(x) (((x) >> 11) & 0x01)
+#define RC5_ADDR(x) (((x) >> 6) & 0x1f)
+#define RC5_INSTR(x) (((x) >> 0) & 0x3f)
/* decode raw bit pattern to RC5 code */
static u32 bttv_rc5_decode(unsigned int code)
@@ -195,8 +195,8 @@ static void bttv_rc5_timer_end(unsigned long data)
{
struct bttv_ir *ir = (struct bttv_ir *)data;
struct timeval tv;
- u32 gap;
- u32 rc5 = 0;
+ u32 gap, rc5, scancode;
+ u8 toggle, command, system;
/* get time */
do_gettimeofday(&tv);
@@ -221,26 +221,29 @@ static void bttv_rc5_timer_end(unsigned long data)
if (ir->last_bit < 20) {
/* ignore spurious codes (caused by light/other remotes) */
dprintk("short code: %x\n", ir->code);
- } else {
- ir->code = (ir->code << ir->shift_by) | 1;
- rc5 = bttv_rc5_decode(ir->code);
-
- /* two start bits? */
- if (RC5_START(rc5) != ir->start) {
- pr_info(DEVNAME ":"
- " rc5 start bits invalid: %u\n", RC5_START(rc5));
-
- /* right address? */
- } else if (RC5_ADDR(rc5) == ir->addr) {
- u32 toggle = RC5_TOGGLE(rc5);
- u32 instr = RC5_INSTR(rc5);
-
- /* Good code */
- rc_keydown(ir->dev, instr, toggle);
- dprintk("instruction %x, toggle %x\n",
- instr, toggle);
- }
+ return;
}
+
+ ir->code = (ir->code << ir->shift_by) | 1;
+ rc5 = bttv_rc5_decode(ir->code);
+
+ toggle = RC5_TOGGLE(rc5);
+ system = RC5_ADDR(rc5);
+ command = RC5_INSTR(rc5);
+
+ switch (RC5_START(rc5)) {
+ case 0x3:
+ break;
+ case 0x2:
+ command += 0x40;
+ break;
+ default:
+ return;
+ }
+
+ scancode = system << 8 | command;
+ rc_keydown(ir->dev, scancode, toggle);
+ dprintk("scancode %x, toggle %x\n", scancode, toggle);
}
static int bttv_rc5_irq(struct bttv *btv)
@@ -310,8 +313,6 @@ static void bttv_ir_start(struct bttv *btv, struct bttv_ir *ir)
/* set timer_end for code completion */
setup_timer(&ir->timer, bttv_rc5_timer_end, (unsigned long)ir);
ir->shift_by = 1;
- ir->start = 3;
- ir->addr = 0x0;
ir->rc5_remote_gap = ir_rc5_remote_gap;
}
}
@@ -490,8 +491,8 @@ int bttv_input_init(struct bttv *btv)
ir->polling = 50; // ms
break;
case BTTV_BOARD_NEBULA_DIGITV:
- ir_codes = RC_MAP_NEBULA;
- ir->rc5_gpio = true;
+ ir_codes = RC_MAP_NEBULA;
+ ir->rc5_gpio = true;
break;
case BTTV_BOARD_MACHTV_MAGICTV:
ir_codes = RC_MAP_APAC_VIEWCOMP;
@@ -514,7 +515,8 @@ int bttv_input_init(struct bttv *btv)
ir->mask_keycode);
break;
}
- if (NULL == ir_codes) {
+
+ if (!ir_codes) {
dprintk("Ooops: IR config error [card=%d]\n", btv->c.type);
err = -ENODEV;
goto err_out_free;
@@ -133,8 +133,6 @@ struct bttv_ir {
u32 polling;
u32 last_gpio;
int shift_by;
- int start; // What should RC5_START() be
- int addr; // What RC5_ADDR() should be.
int rc5_remote_gap;
/* RC5 gpio */
@@ -14,68 +14,68 @@
#include <linux/module.h>
static struct rc_map_table nebula[] = {
- { 0x00, KEY_0 },
- { 0x01, KEY_1 },
- { 0x02, KEY_2 },
- { 0x03, KEY_3 },
- { 0x04, KEY_4 },
- { 0x05, KEY_5 },
- { 0x06, KEY_6 },
- { 0x07, KEY_7 },
- { 0x08, KEY_8 },
- { 0x09, KEY_9 },
- { 0x0a, KEY_TV },
- { 0x0b, KEY_AUX },
- { 0x0c, KEY_DVD },
- { 0x0d, KEY_POWER },
- { 0x0e, KEY_CAMERA }, /* labelled 'Picture' */
- { 0x0f, KEY_AUDIO },
- { 0x10, KEY_INFO },
- { 0x11, KEY_F13 }, /* 16:9 */
- { 0x12, KEY_F14 }, /* 14:9 */
- { 0x13, KEY_EPG },
- { 0x14, KEY_EXIT },
- { 0x15, KEY_MENU },
- { 0x16, KEY_UP },
- { 0x17, KEY_DOWN },
- { 0x18, KEY_LEFT },
- { 0x19, KEY_RIGHT },
- { 0x1a, KEY_ENTER },
- { 0x1b, KEY_CHANNELUP },
- { 0x1c, KEY_CHANNELDOWN },
- { 0x1d, KEY_VOLUMEUP },
- { 0x1e, KEY_VOLUMEDOWN },
- { 0x1f, KEY_RED },
- { 0x20, KEY_GREEN },
- { 0x21, KEY_YELLOW },
- { 0x22, KEY_BLUE },
- { 0x23, KEY_SUBTITLE },
- { 0x24, KEY_F15 }, /* AD */
- { 0x25, KEY_TEXT },
- { 0x26, KEY_MUTE },
- { 0x27, KEY_REWIND },
- { 0x28, KEY_STOP },
- { 0x29, KEY_PLAY },
- { 0x2a, KEY_FASTFORWARD },
- { 0x2b, KEY_F16 }, /* chapter */
- { 0x2c, KEY_PAUSE },
- { 0x2d, KEY_PLAY },
- { 0x2e, KEY_RECORD },
- { 0x2f, KEY_F17 }, /* picture in picture */
- { 0x30, KEY_KPPLUS }, /* zoom in */
- { 0x31, KEY_KPMINUS }, /* zoom out */
- { 0x32, KEY_F18 }, /* capture */
- { 0x33, KEY_F19 }, /* web */
- { 0x34, KEY_EMAIL },
- { 0x35, KEY_PHONE },
- { 0x36, KEY_PC },
+ { 0x0000, KEY_0 },
+ { 0x0001, KEY_1 },
+ { 0x0002, KEY_2 },
+ { 0x0003, KEY_3 },
+ { 0x0004, KEY_4 },
+ { 0x0005, KEY_5 },
+ { 0x0006, KEY_6 },
+ { 0x0007, KEY_7 },
+ { 0x0008, KEY_8 },
+ { 0x0009, KEY_9 },
+ { 0x000a, KEY_TV },
+ { 0x000b, KEY_AUX },
+ { 0x000c, KEY_DVD },
+ { 0x000d, KEY_POWER },
+ { 0x000e, KEY_CAMERA }, /* labelled 'Picture' */
+ { 0x000f, KEY_AUDIO },
+ { 0x0010, KEY_INFO },
+ { 0x0011, KEY_F13 }, /* 16:9 */
+ { 0x0012, KEY_F14 }, /* 14:9 */
+ { 0x0013, KEY_EPG },
+ { 0x0014, KEY_EXIT },
+ { 0x0015, KEY_MENU },
+ { 0x0016, KEY_UP },
+ { 0x0017, KEY_DOWN },
+ { 0x0018, KEY_LEFT },
+ { 0x0019, KEY_RIGHT },
+ { 0x001a, KEY_ENTER },
+ { 0x001b, KEY_CHANNELUP },
+ { 0x001c, KEY_CHANNELDOWN },
+ { 0x001d, KEY_VOLUMEUP },
+ { 0x001e, KEY_VOLUMEDOWN },
+ { 0x001f, KEY_RED },
+ { 0x0020, KEY_GREEN },
+ { 0x0021, KEY_YELLOW },
+ { 0x0022, KEY_BLUE },
+ { 0x0023, KEY_SUBTITLE },
+ { 0x0024, KEY_F15 }, /* AD */
+ { 0x0025, KEY_TEXT },
+ { 0x0026, KEY_MUTE },
+ { 0x0027, KEY_REWIND },
+ { 0x0028, KEY_STOP },
+ { 0x0029, KEY_PLAY },
+ { 0x002a, KEY_FASTFORWARD },
+ { 0x002b, KEY_F16 }, /* chapter */
+ { 0x002c, KEY_PAUSE },
+ { 0x002d, KEY_PLAY },
+ { 0x002e, KEY_RECORD },
+ { 0x002f, KEY_F17 }, /* picture in picture */
+ { 0x0030, KEY_KPPLUS }, /* zoom in */
+ { 0x0031, KEY_KPMINUS }, /* zoom out */
+ { 0x0032, KEY_F18 }, /* capture */
+ { 0x0033, KEY_F19 }, /* web */
+ { 0x0034, KEY_EMAIL },
+ { 0x0035, KEY_PHONE },
+ { 0x0036, KEY_PC },
};
static struct rc_map_list nebula_map = {
.map = {
.scan = nebula,
.size = ARRAY_SIZE(nebula),
- .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */
+ .rc_type = RC_TYPE_RC5,
.name = RC_MAP_NEBULA,
}
};
The bt8xx driver does RC5 decoding for Nebula digi hardware, but includes some pointless limitations (both start bits must be one, the device/address/system must be 0x00). Remove those limitations and update the keymap to use the full RC5 scancode (fortunately the 0x00 address means that this is perfectly backwards compatible). Signed-off-by: David Härdeman <david@hardeman.nu> --- drivers/media/pci/bt8xx/bttv-input.c | 62 ++++++++++--------- drivers/media/pci/bt8xx/bttvp.h | 2 - drivers/media/rc/keymaps/rc-nebula.c | 112 +++++++++++++++++----------------- 3 files changed, 88 insertions(+), 88 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html