@@ -261,8 +261,9 @@ static int ir_key_poll(struct IR_i2c *ir)
}
if (rc) {
- dprintk(1, "%s: scancode = 0x%08x\n", __func__, scancode);
- rc_keydown(ir->rc, scancode, toggle);
+ dprintk(1, "%s: proto = 0x%04x, scancode = 0x%08x\n",
+ __func__, protocol, scancode);
+ rc_keydown(ir->rc, protocol, scancode, toggle);
}
return 0;
}
@@ -73,12 +73,12 @@ static void ir_handle_key(struct bttv *btv)
if ((ir->mask_keydown && (gpio & ir->mask_keydown)) ||
(ir->mask_keyup && !(gpio & ir->mask_keyup))) {
- rc_keydown_notimeout(ir->dev, data, 0);
+ rc_keydown_notimeout(ir->dev, RC_TYPE_UNKNOWN, data, 0);
} else {
/* HACK: Probably, ir->mask_keydown is missing
for this board */
if (btv->c.type == BTTV_BOARD_WINFAST2000)
- rc_keydown_notimeout(ir->dev, data, 0);
+ rc_keydown_notimeout(ir->dev, RC_TYPE_UNKNOWN, data, 0);
rc_keyup(ir->dev);
}
@@ -103,7 +103,7 @@ static void ir_enltv_handle_key(struct bttv *btv)
gpio, data,
(gpio & ir->mask_keyup) ? " up" : "up/down");
- rc_keydown_notimeout(ir->dev, data, 0);
+ rc_keydown_notimeout(ir->dev, RC_TYPE_UNKNOWN, data, 0);
if (keyup)
rc_keyup(ir->dev);
} else {
@@ -117,7 +117,7 @@ static void ir_enltv_handle_key(struct bttv *btv)
if (keyup)
rc_keyup(ir->dev);
else
- rc_keydown_notimeout(ir->dev, data, 0);
+ rc_keydown_notimeout(ir->dev, RC_TYPE_UNKNOWN, data, 0);
}
ir->last_gpio = data | keyup;
@@ -241,8 +241,8 @@ static void bttv_rc5_timer_end(unsigned long data)
return;
}
- scancode = system << 8 | command;
- rc_keydown(ir->dev, scancode, toggle);
+ scancode = RC_SCANCODE_RC5(system, command);
+ rc_keydown(ir->dev, RC_TYPE_RC5, scancode, toggle);
dprintk("scancode %x, toggle %x\n", scancode, toggle);
}
@@ -130,25 +130,41 @@ static void cx88_ir_handle_key(struct cx88_IR *ir)
data = (data << 4) | ((gpio_key & 0xf0) >> 4);
- rc_keydown(ir->dev, data, 0);
+ rc_keydown(ir->dev, RC_TYPE_UNKNOWN, data, 0);
+
+ } else if (ir->core->boardnr == CX88_BOARD_PROLINK_PLAYTVPVR ||
+ ir->core->boardnr == CX88_BOARD_PIXELVIEW_PLAYTV_ULTRA_PRO) {
+ /* bit cleared on keydown, NEC scancode, 0xAAAACC, A = 0x866b */
+ u16 addr;
+ u8 cmd;
+ u32 scancode;
+
+ addr = (data >> 8) & 0xffff;
+ cmd = (data >> 0) & 0x00ff;
+ scancode = RC_SCANCODE_NECX(addr, cmd);
+
+ if (0 == (gpio & ir->mask_keyup))
+ rc_keydown_notimeout(ir->dev, RC_TYPE_NEC, scancode, 0);
+ else
+ rc_keyup(ir->dev);
} else if (ir->mask_keydown) {
/* bit set on keydown */
if (gpio & ir->mask_keydown)
- rc_keydown_notimeout(ir->dev, data, 0);
+ rc_keydown_notimeout(ir->dev, RC_TYPE_UNKNOWN, data, 0);
else
rc_keyup(ir->dev);
} else if (ir->mask_keyup) {
/* bit cleared on keydown */
if (0 == (gpio & ir->mask_keyup))
- rc_keydown_notimeout(ir->dev, data, 0);
+ rc_keydown_notimeout(ir->dev, RC_TYPE_UNKNOWN, data, 0);
else
rc_keyup(ir->dev);
} else {
/* can't distinguish keydown/up :-/ */
- rc_keydown_notimeout(ir->dev, data, 0);
+ rc_keydown_notimeout(ir->dev, RC_TYPE_UNKNOWN, data, 0);
rc_keyup(ir->dev);
}
}
@@ -329,6 +345,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
* 002-T mini RC, provided with newer PV hardware
*/
ir_codes = RC_MAP_PIXELVIEW_MK12;
+ rc_type = RC_BIT_NEC;
ir->gpio_addr = MO_GP1_IO;
ir->mask_keyup = 0x80;
ir->polling = 10; /* ms */
@@ -416,7 +433,6 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
break;
case CX88_BOARD_TWINHAN_VP1027_DVBS:
ir_codes = RC_MAP_TWINHAN_VP1027_DVBS;
- rc_type = RC_BIT_NEC;
ir->sampling = 0xff00; /* address */
break;
}
@@ -678,7 +678,8 @@ static void dm1105_emit_key(struct work_struct *work)
data = (ircom >> 8) & 0x7f;
- rc_keydown(ir->dev, data, 0);
+ /* FIXME: UNKNOWN because we don't generate a full NEC scancode (yet?) */
+ rc_keydown(ir->dev, RC_TYPE_UNKNOWN, data, 0);
}
/* work handler */
@@ -83,14 +83,14 @@ static int build_key(struct saa7134_dev *dev)
if (data == ir->mask_keycode)
rc_keyup(ir->dev);
else
- rc_keydown_notimeout(ir->dev, data, 0);
+ rc_keydown_notimeout(ir->dev, RC_TYPE_UNKNOWN, data, 0);
return 0;
}
if (ir->polling) {
if ((ir->mask_keydown && (0 != (gpio & ir->mask_keydown))) ||
(ir->mask_keyup && (0 == (gpio & ir->mask_keyup)))) {
- rc_keydown_notimeout(ir->dev, data, 0);
+ rc_keydown_notimeout(ir->dev, RC_TYPE_UNKNOWN, data, 0);
} else {
rc_keyup(ir->dev);
}
@@ -98,7 +98,7 @@ static int build_key(struct saa7134_dev *dev)
else { /* IRQ driven mode - handle key press and release in one go */
if ((ir->mask_keydown && (0 != (gpio & ir->mask_keydown))) ||
(ir->mask_keyup && (0 == (gpio & ir->mask_keyup)))) {
- rc_keydown_notimeout(ir->dev, data, 0);
+ rc_keydown_notimeout(ir->dev, RC_TYPE_UNKNOWN, data, 0);
rc_keyup(ir->dev);
}
}
@@ -161,14 +161,14 @@ static void msp430_ir_interrupt(unsigned long data)
return;
if (budget_ci->ir.full_rc5) {
- rc_keydown(dev,
- budget_ci->ir.rc5_device <<8 | budget_ci->ir.ir_key,
- (command & 0x20) ? 1 : 0);
+ rc_keydown(dev, RC_TYPE_RC5,
+ RC_SCANCODE_RC5(budget_ci->ir.rc5_device, budget_ci->ir.ir_key),
+ !!(command & 0x20));
return;
}
/* FIXME: We should generate complete scancodes for all devices */
- rc_keydown(dev, budget_ci->ir.ir_key, (command & 0x20) ? 1 : 0);
+ rc_keydown(dev, RC_TYPE_UNKNOWN, budget_ci->ir.ir_key, !!(command & 0x20));
}
static int msp430_ir_init(struct budget_ci *budget_ci)
@@ -622,8 +622,8 @@ static void ati_remote_input_report(struct urb *urb)
* it would cause ghost repeats which would be a
* regression for this driver.
*/
- rc_keydown_notimeout(ati_remote->rdev, scancode,
- data[2]);
+ rc_keydown_notimeout(ati_remote->rdev, RC_TYPE_OTHER,
+ scancode, data[2]);
rc_keyup(ati_remote->rdev);
}
return;
@@ -778,9 +778,11 @@ static void img_ir_handle_data(struct img_ir_priv *priv, u32 len, u64 raw)
struct img_ir_priv_hw *hw = &priv->hw;
const struct img_ir_decoder *dec = hw->decoder;
int ret = IMG_IR_SCANCODE;
- int scancode;
+ u32 scancode;
+ enum rc_type protocol = RC_TYPE_UNKNOWN;
+
if (dec->scancode)
- ret = dec->scancode(len, raw, &scancode, hw->enabled_protocols);
+ ret = dec->scancode(len, raw, &protocol, &scancode, hw->enabled_protocols);
else if (len >= 32)
scancode = (u32)raw;
else if (len < 32)
@@ -789,7 +791,7 @@ static void img_ir_handle_data(struct img_ir_priv *priv, u32 len, u64 raw)
len, (unsigned long long)raw);
if (ret == IMG_IR_SCANCODE) {
dev_dbg(priv->dev, "decoded scan code %#x\n", scancode);
- rc_keydown(hw->rdev, scancode, 0);
+ rc_keydown(hw->rdev, protocol, scancode, 0);
img_ir_end_repeat(priv);
} else if (ret == IMG_IR_REPEATCODE) {
if (hw->mode == IMG_IR_M_REPEATING) {
@@ -157,7 +157,8 @@ struct img_ir_decoder {
struct img_ir_control control;
/* scancode logic */
- int (*scancode)(int len, u64 raw, int *scancode, u64 protocols);
+ int (*scancode)(int len, u64 raw, enum rc_type *protocol,
+ u32 *scancode, u64 enabled_protocols);
int (*filter)(const struct rc_scancode_filter *in,
struct img_ir_filter *out, u64 protocols);
};
@@ -7,7 +7,8 @@
#include "img-ir-hw.h"
/* Convert JVC data to a scancode */
-static int img_ir_jvc_scancode(int len, u64 raw, int *scancode, u64 protocols)
+static int img_ir_jvc_scancode(int len, u64 raw, enum rc_type *protocol,
+ u32 *scancode, u64 enabled_protocols)
{
unsigned int cust, data;
@@ -17,6 +18,7 @@ static int img_ir_jvc_scancode(int len, u64 raw, int *scancode, u64 protocols)
cust = (raw >> 0) & 0xff;
data = (raw >> 8) & 0xff;
+ *protocol = RC_TYPE_JVC;
*scancode = cust << 8 | data;
return IMG_IR_SCANCODE;
}
@@ -7,7 +7,8 @@
#include "img-ir-hw.h"
/* Convert NEC data to a scancode */
-static int img_ir_nec_scancode(int len, u64 raw, int *scancode, u64 protocols)
+static int img_ir_nec_scancode(int len, u64 raw, enum rc_type *protocol,
+ u32 *scancode, u64 enabled_protocols)
{
unsigned int addr, addr_inv, data, data_inv;
/* a repeat code has no data */
@@ -39,6 +40,7 @@ static int img_ir_nec_scancode(int len, u64 raw, int *scancode, u64 protocols)
*scancode = addr << 8 |
data;
}
+ *protocol = RC_TYPE_NEC;
return IMG_IR_SCANCODE;
}
@@ -18,7 +18,8 @@
#include "img-ir-hw.h"
/* Convert Sanyo data to a scancode */
-static int img_ir_sanyo_scancode(int len, u64 raw, int *scancode, u64 protocols)
+static int img_ir_sanyo_scancode(int len, u64 raw, enum rc_type *protocol,
+ u32 *scancode, u64 enabled_protocols)
{
unsigned int addr, addr_inv, data, data_inv;
/* a repeat code has no data */
@@ -38,6 +39,7 @@ static int img_ir_sanyo_scancode(int len, u64 raw, int *scancode, u64 protocols)
return -EINVAL;
/* Normal Sanyo */
+ *protocol = RC_TYPE_SANYO;
*scancode = addr << 8 | data;
return IMG_IR_SCANCODE;
}
@@ -7,7 +7,8 @@
#include "img-ir-hw.h"
/* Convert Sharp data to a scancode */
-static int img_ir_sharp_scancode(int len, u64 raw, int *scancode, u64 protocols)
+static int img_ir_sharp_scancode(int len, u64 raw, enum rc_type *protocol,
+ u32 *scancode, u64 enabled_protocols)
{
unsigned int addr, cmd, exp, chk;
@@ -26,6 +27,7 @@ static int img_ir_sharp_scancode(int len, u64 raw, int *scancode, u64 protocols)
/* probably the second half of the message */
return -EINVAL;
+ *protocol = RC_TYPE_SHARP;
*scancode = addr << 8 | cmd;
return IMG_IR_SCANCODE;
}
@@ -7,35 +7,39 @@
#include "img-ir-hw.h"
/* Convert Sony data to a scancode */
-static int img_ir_sony_scancode(int len, u64 raw, int *scancode, u64 protocols)
+static int img_ir_sony_scancode(int len, u64 raw, enum rc_type *protocol,
+ u32 *scancode, u64 enabled_protocols)
{
unsigned int dev, subdev, func;
switch (len) {
case 12:
- if (!(protocols & RC_BIT_SONY12))
+ if (!(enabled_protocols & RC_BIT_SONY12))
return -EINVAL;
func = raw & 0x7f; /* first 7 bits */
raw >>= 7;
dev = raw & 0x1f; /* next 5 bits */
subdev = 0;
+ *protocol = RC_TYPE_SONY12;
break;
case 15:
- if (!(protocols & RC_BIT_SONY15))
+ if (!(enabled_protocols & RC_BIT_SONY15))
return -EINVAL;
func = raw & 0x7f; /* first 7 bits */
raw >>= 7;
dev = raw & 0xff; /* next 8 bits */
subdev = 0;
+ *protocol = RC_TYPE_SONY15;
break;
case 20:
- if (!(protocols & RC_BIT_SONY20))
+ if (!(enabled_protocols & RC_BIT_SONY20))
return -EINVAL;
func = raw & 0x7f; /* first 7 bits */
raw >>= 7;
dev = raw & 0x1f; /* next 5 bits */
raw >>= 5;
subdev = raw & 0xff; /* next 8 bits */
+ *protocol = RC_TYPE_SONY20;
break;
default:
return -EINVAL;
@@ -1579,7 +1579,10 @@ static void imon_incoming_packet(struct imon_context *ictx,
if (press_type == 0)
rc_keyup(ictx->rdev);
else {
- rc_keydown(ictx->rdev, ictx->rc_scancode, ictx->rc_toggle);
+ if (ictx->rc_type == RC_BIT_RC6_MCE)
+ rc_keydown(ictx->rdev,
+ ictx->rc_type == RC_BIT_RC6_MCE ? RC_TYPE_RC6_MCE : RC_TYPE_OTHER,
+ ictx->rc_scancode, ictx->rc_toggle);
spin_lock_irqsave(&ictx->kc_lock, flags);
ictx->last_keycode = ictx->kc;
spin_unlock_irqrestore(&ictx->kc_lock, flags);
@@ -140,7 +140,7 @@ again:
scancode = (bitrev8((data->bits >> 8) & 0xff) << 8) |
(bitrev8((data->bits >> 0) & 0xff) << 0);
IR_dprintk(1, "JVC scancode 0x%04x\n", scancode);
- rc_keydown(dev, scancode, data->toggle);
+ rc_keydown(dev, RC_TYPE_JVC, scancode, data->toggle);
data->first = false;
data->old_bits = data->bits;
} else if (data->bits == data->old_bits) {
@@ -192,7 +192,7 @@ static int ir_nec_decode(struct rc_dev *dev, struct ir_raw_event ev)
if (data->is_nec_x)
data->necx_repeat = true;
- rc_keydown(dev, scancode, 0);
+ rc_keydown(dev, RC_TYPE_NEC, scancode, 0);
data->state = STATE_INACTIVE;
return 0;
}
@@ -51,6 +51,7 @@ static int ir_rc5_decode(struct rc_dev *dev, struct ir_raw_event ev)
struct rc5_dec *data = &dev->raw->rc5;
u8 toggle;
u32 scancode;
+ enum rc_type protocol;
if (!rc_protocols_enabled(dev, RC_BIT_RC5 | RC_BIT_RC5X))
return 0;
@@ -138,6 +139,7 @@ again:
toggle = (data->bits & 0x20000) ? 1 : 0;
command += (data->bits & 0x01000) ? 0 : 0x40;
scancode = system << 16 | command << 8 | xdata;
+ protocol = RC_TYPE_RC5X;
IR_dprintk(1, "RC5X scancode 0x%06x (toggle: %u)\n",
scancode, toggle);
@@ -154,12 +156,13 @@ again:
toggle = (data->bits & 0x00800) ? 1 : 0;
command += (data->bits & 0x01000) ? 0 : 0x40;
scancode = system << 8 | command;
+ protocol = RC_TYPE_RC5;
IR_dprintk(1, "RC5 scancode 0x%04x (toggle: %u)\n",
scancode, toggle);
}
- rc_keydown(dev, scancode, toggle);
+ rc_keydown(dev, protocol, scancode, toggle);
data->state = STATE_INACTIVE;
return 0;
}
@@ -115,7 +115,7 @@ again:
IR_dprintk(1, "RC5-sz scancode 0x%04x (toggle: %u)\n",
scancode, toggle);
- rc_keydown(dev, scancode, toggle);
+ rc_keydown(dev, RC_TYPE_RC5_SZ, scancode, toggle);
data->state = STATE_INACTIVE;
return 0;
}
@@ -88,6 +88,7 @@ static int ir_rc6_decode(struct rc_dev *dev, struct ir_raw_event ev)
struct rc6_dec *data = &dev->raw->rc6;
u32 scancode;
u8 toggle;
+ enum rc_type protocol;
if (!rc_protocols_enabled(dev, RC_BIT_RC6_0 | RC_BIT_RC6_6A_20 |
RC_BIT_RC6_6A_24 | RC_BIT_RC6_6A_32 |
@@ -233,9 +234,11 @@ again:
case RC6_MODE_0:
scancode = data->body;
toggle = data->toggle;
+ protocol = RC_TYPE_RC6_0;
IR_dprintk(1, "RC6(0) scancode 0x%04x (toggle: %u)\n",
scancode, toggle);
break;
+
case RC6_MODE_6A:
if (data->count > CHAR_BIT * sizeof data->body) {
IR_dprintk(1, "RC6 too many (%u) data bits\n",
@@ -244,23 +247,39 @@ again:
}
scancode = data->body;
- if (data->count == RC6_6A_32_NBITS &&
- (scancode & RC6_6A_LCC_MASK) == RC6_6A_MCE_CC) {
- /* MCE RC */
- toggle = (scancode & RC6_6A_MCE_TOGGLE_MASK) ? 1 : 0;
- scancode &= ~RC6_6A_MCE_TOGGLE_MASK;
- } else {
+ switch (data->count) {
+ case 20:
+ protocol = RC_TYPE_RC6_6A_20;
+ toggle = 0;
+ break;
+ case 24:
+ protocol = RC_BIT_RC6_6A_24;
toggle = 0;
+ break;
+ case 32:
+ if ((scancode & RC6_6A_LCC_MASK) == RC6_6A_MCE_CC) {
+ protocol = RC_TYPE_RC6_MCE;
+ scancode &= ~RC6_6A_MCE_TOGGLE_MASK;
+ toggle = !!(scancode & RC6_6A_MCE_TOGGLE_MASK);
+ } else {
+ protocol = RC_BIT_RC6_6A_32;
+ toggle = 0;
+ }
+ break;
+ default:
+ IR_dprintk(1, "RC6(6A) unsupported length\n");
+ goto out;
}
- IR_dprintk(1, "RC6(6A) scancode 0x%08x (toggle: %u)\n",
- scancode, toggle);
+
+ IR_dprintk(1, "RC6(6A) proto 0x%04x, scancode 0x%08x (toggle: %u)\n",
+ protocol, scancode, toggle);
break;
default:
IR_dprintk(1, "RC6 unknown mode\n");
goto out;
}
- rc_keydown(dev, scancode, toggle);
+ rc_keydown(dev, protocol, scancode, toggle);
data->state = STATE_INACTIVE;
return 0;
}
@@ -167,7 +167,7 @@ static int ir_sanyo_decode(struct rc_dev *dev, struct ir_raw_event ev)
scancode = address << 8 | command;
IR_dprintk(1, "SANYO scancode: 0x%06x\n", scancode);
- rc_keydown(dev, scancode, 0);
+ rc_keydown(dev, RC_TYPE_SANYO, scancode, 0);
data->state = STATE_INACTIVE;
return 0;
}
@@ -162,7 +162,7 @@ static int ir_sharp_decode(struct rc_dev *dev, struct ir_raw_event ev)
scancode = address << 8 | command;
IR_dprintk(1, "Sharp scancode 0x%04x\n", scancode);
- rc_keydown(dev, scancode, 0);
+ rc_keydown(dev, RC_TYPE_SHARP, scancode, 0);
data->state = STATE_INACTIVE;
return 0;
}
@@ -42,6 +42,7 @@ enum sony_state {
static int ir_sony_decode(struct rc_dev *dev, struct ir_raw_event ev)
{
struct sony_dec *data = &dev->raw->sony;
+ enum rc_type protocol;
u32 scancode;
u8 device, subdevice, function;
@@ -131,6 +132,7 @@ static int ir_sony_decode(struct rc_dev *dev, struct ir_raw_event ev)
device = bitrev8((data->bits << 3) & 0xF8);
subdevice = 0;
function = bitrev8((data->bits >> 4) & 0xFE);
+ protocol = RC_TYPE_SONY12;
break;
case 15:
if (!rc_protocols_enabled(dev, RC_BIT_SONY15)) {
@@ -140,6 +142,7 @@ static int ir_sony_decode(struct rc_dev *dev, struct ir_raw_event ev)
device = bitrev8((data->bits >> 0) & 0xFF);
subdevice = 0;
function = bitrev8((data->bits >> 7) & 0xFE);
+ protocol = RC_TYPE_SONY15;
break;
case 20:
if (!rc_protocols_enabled(dev, RC_BIT_SONY20)) {
@@ -149,6 +152,7 @@ static int ir_sony_decode(struct rc_dev *dev, struct ir_raw_event ev)
device = bitrev8((data->bits >> 5) & 0xF8);
subdevice = bitrev8((data->bits >> 0) & 0xFF);
function = bitrev8((data->bits >> 12) & 0xFE);
+ protocol = RC_TYPE_SONY20;
break;
default:
IR_dprintk(1, "Sony invalid bitcount %u\n", data->count);
@@ -157,7 +161,7 @@ static int ir_sony_decode(struct rc_dev *dev, struct ir_raw_event ev)
scancode = device << 16 | subdevice << 8 | function;
IR_dprintk(1, "Sony(%u) scancode 0x%05x\n", data->count, scancode);
- rc_keydown(dev, scancode, 0);
+ rc_keydown(dev, protocol, scancode, 0);
data->state = STATE_INACTIVE;
return 0;
}
@@ -623,6 +623,7 @@ EXPORT_SYMBOL_GPL(rc_repeat);
/**
* ir_do_keydown() - internal function to process a keypress
* @dev: the struct rc_dev descriptor of the device
+ * @protocol: the protocol of the keypress
* @scancode: the scancode of the keypress
* @keycode: the keycode of the keypress
* @toggle: the toggle value of the keypress
@@ -630,13 +631,14 @@ EXPORT_SYMBOL_GPL(rc_repeat);
* This function is used internally to register a keypress, it must be
* called with keylock held.
*/
-static void ir_do_keydown(struct rc_dev *dev, int scancode,
- u32 keycode, u8 toggle)
+static void ir_do_keydown(struct rc_dev *dev, enum rc_type protocol,
+ u32 scancode, u32 keycode, u8 toggle)
{
struct rc_scancode_filter *filter;
- bool new_event = !dev->keypressed ||
- dev->last_scancode != scancode ||
- dev->last_toggle != toggle;
+ bool new_event = (!dev->keypressed ||
+ dev->last_protocol != protocol ||
+ dev->last_scancode != scancode ||
+ dev->last_toggle != toggle);
if (new_event && dev->keypressed)
ir_do_keyup(dev, false);
@@ -651,13 +653,14 @@ static void ir_do_keydown(struct rc_dev *dev, int scancode,
if (new_event && keycode != KEY_RESERVED) {
/* Register a keypress */
dev->keypressed = true;
+ dev->last_protocol = protocol;
dev->last_scancode = scancode;
dev->last_toggle = toggle;
dev->last_keycode = keycode;
IR_dprintk(1, "%s: key down event, "
- "key 0x%04x, scancode 0x%04x\n",
- dev->input_name, keycode, scancode);
+ "key 0x%04x, protocol 0x%04x, scancode 0x%08x\n",
+ dev->input_name, keycode, protocol, scancode);
input_report_key(dev->input_dev, keycode, 1);
led_trigger_event(led_feedback, LED_FULL);
@@ -669,20 +672,21 @@ static void ir_do_keydown(struct rc_dev *dev, int scancode,
/**
* rc_keydown() - generates input event for a key press
* @dev: the struct rc_dev descriptor of the device
- * @scancode: the scancode that we're seeking
+ * @protocol: the protocol for the keypress
+ * @scancode: the scancode for the keypress
* @toggle: the toggle value (protocol dependent, if the protocol doesn't
* support toggle values, this should be set to zero)
*
* This routine is used to signal that a key has been pressed on the
* remote control.
*/
-void rc_keydown(struct rc_dev *dev, int scancode, u8 toggle)
+void rc_keydown(struct rc_dev *dev, enum rc_type protocol, u32 scancode, u8 toggle)
{
unsigned long flags;
u32 keycode = rc_g_keycode_from_table(dev, scancode);
spin_lock_irqsave(&dev->keylock, flags);
- ir_do_keydown(dev, scancode, keycode, toggle);
+ ir_do_keydown(dev, protocol, scancode, keycode, toggle);
if (dev->keypressed) {
dev->keyup_jiffies = jiffies + msecs_to_jiffies(IR_KEYPRESS_TIMEOUT);
@@ -696,20 +700,22 @@ EXPORT_SYMBOL_GPL(rc_keydown);
* rc_keydown_notimeout() - generates input event for a key press without
* an automatic keyup event at a later time
* @dev: the struct rc_dev descriptor of the device
- * @scancode: the scancode that we're seeking
+ * @protocol: the protocol for the keypress
+ * @scancode: the scancode for the keypress
* @toggle: the toggle value (protocol dependent, if the protocol doesn't
* support toggle values, this should be set to zero)
*
* This routine is used to signal that a key has been pressed on the
* remote control. The driver must manually call rc_keyup() at a later stage.
*/
-void rc_keydown_notimeout(struct rc_dev *dev, int scancode, u8 toggle)
+void rc_keydown_notimeout(struct rc_dev *dev, enum rc_type protocol,
+ u32 scancode, u8 toggle)
{
unsigned long flags;
u32 keycode = rc_g_keycode_from_table(dev, scancode);
spin_lock_irqsave(&dev->keylock, flags);
- ir_do_keydown(dev, scancode, keycode, toggle);
+ ir_do_keydown(dev, protocol, scancode, keycode, toggle);
spin_unlock_irqrestore(&dev->keylock, flags);
}
EXPORT_SYMBOL_GPL(rc_keydown_notimeout);
@@ -1213,7 +1213,7 @@ static int af9015_rc_query(struct dvb_usb_device *d)
if ((state->rc_repeat != buf[6] || buf[0]) &&
!memcmp(&buf[12], state->rc_last, 4)) {
dev_dbg(&d->udev->dev, "%s: key repeated\n", __func__);
- rc_keydown(d->rc_dev, state->rc_keycode, 0);
+ rc_repeat(d->rc_dev);
state->rc_repeat = buf[6];
return ret;
}
@@ -1233,18 +1233,22 @@ static int af9015_rc_query(struct dvb_usb_device *d)
if (buf[14] == (u8) ~buf[15]) {
if (buf[12] == (u8) ~buf[13]) {
/* NEC */
- state->rc_keycode = buf[12] << 8 | buf[14];
+ state->rc_keycode = RC_SCANCODE_NEC(buf[12],
+ buf[14]);
} else {
/* NEC extended*/
- state->rc_keycode = buf[12] << 16 |
- buf[13] << 8 | buf[14];
+ state->rc_keycode = RC_SCANCODE_NECX(buf[12] << 8 |
+ buf[13],
+ buf[14]);
}
} else {
/* 32 bit NEC */
- state->rc_keycode = buf[12] << 24 | buf[13] << 16 |
- buf[14] << 8 | buf[15];
+ state->rc_keycode = RC_SCANCODE_NEC32(buf[12] << 24 |
+ buf[13] << 16 |
+ buf[14] << 8 |
+ buf[15]);
}
- rc_keydown(d->rc_dev, state->rc_keycode, 0);
+ rc_keydown(d->rc_dev, RC_TYPE_NEC, state->rc_keycode, 0);
} else {
dev_dbg(&d->udev->dev, "%s: no key press\n", __func__);
/* Invalidate last keypress */
@@ -1287,19 +1287,20 @@ static int af9035_rc_query(struct dvb_usb_device *d)
if ((buf[2] + buf[3]) == 0xff) {
if ((buf[0] + buf[1]) == 0xff) {
/* NEC standard 16bit */
- key = buf[0] << 8 | buf[2];
+ key = RC_SCANCODE_NEC(buf[0], buf[2]);
} else {
/* NEC extended 24bit */
- key = buf[0] << 16 | buf[1] << 8 | buf[2];
+ key = RC_SCANCODE_NECX(buf[0] << 8 | buf[1], buf[2]);
}
} else {
/* NEC full code 32bit */
- key = buf[0] << 24 | buf[1] << 16 | buf[2] << 8 | buf[3];
+ key = RC_SCANCODE_NEC32(buf[0] << 24 | buf[1] << 16 |
+ buf[2] << 8 | buf[3]);
}
dev_dbg(&d->udev->dev, "%s: %*ph\n", __func__, 4, buf);
- rc_keydown(d->rc_dev, key, 0);
+ rc_keydown(d->rc_dev, RC_TYPE_NEC, key, 0);
return 0;
@@ -1038,7 +1038,8 @@ static int anysee_rc_query(struct dvb_usb_device *d)
if (ircode[0]) {
dev_dbg(&d->udev->dev, "%s: key pressed %02x\n", __func__,
ircode[1]);
- rc_keydown(d->rc_dev, 0x08 << 8 | ircode[1], 0);
+ rc_keydown(d->rc_dev, RC_TYPE_NEC,
+ RC_SCANCODE_NEC(0x08, ircode[1]), 0);
}
return 0;
@@ -207,24 +207,27 @@ static int az6007_streaming_ctrl(struct dvb_frontend *fe, int onoff)
static int az6007_rc_query(struct dvb_usb_device *d)
{
struct az6007_device_state *st = d_to_priv(d);
- unsigned code = 0;
+ unsigned code;
az6007_read(d, AZ6007_READ_IR, 0, 0, st->data, 10);
if (st->data[1] == 0x44)
return 0;
- if ((st->data[1] ^ st->data[2]) == 0xff)
- code = st->data[1];
- else
- code = st->data[1] << 8 | st->data[2];
-
- if ((st->data[3] ^ st->data[4]) == 0xff)
- code = code << 8 | st->data[3];
- else
- code = code << 16 | st->data[3] << 8 | st->data[4];
+ if ((st->data[3] ^ st->data[4]) == 0xff) {
+ if ((st->data[1] ^ st->data[2]) == 0xff)
+ code = RC_SCANCODE_NEC(st->data[1], st->data[3]);
+ else
+ code = RC_SCANCODE_NECX(st->data[1] << 8 | st->data[2],
+ st->data[3]);
+ } else {
+ code = RC_SCANCODE_NEC32(st->data[1] << 24 |
+ st->data[2] << 16 |
+ st->data[3] << 8 |
+ st->data[4]);
+ }
- rc_keydown(d->rc_dev, code, st->data[5]);
+ rc_keydown(d->rc_dev, RC_TYPE_NEC, code, st->data[5]);
return 0;
}
@@ -287,14 +287,13 @@ static void lme2510_int_response(struct urb *lme_urb)
case 0xaa:
debug_data_snipet(1, "INT Remote data snipet", ibuf);
if ((ibuf[4] + ibuf[5]) == 0xff) {
- key = ibuf[5];
- key += (ibuf[3] > 0)
- ? (ibuf[3] ^ 0xff) << 8 : 0;
- key += (ibuf[2] ^ 0xff) << 16;
+ key = RC_SCANCODE_NECX((ibuf[2] ^ 0xff) << 8 |
+ (ibuf[3] > 0) ? (ibuf[3] ^ 0xff) : 0,
+ ibuf[5]);
deb_info(1, "INT Key =%08x", key);
if (adap_to_d(adap)->rc_dev != NULL)
rc_keydown(adap_to_d(adap)->rc_dev,
- key, 0);
+ RC_TYPE_NEC, key, 0);
}
break;
case 0xbb:
@@ -1249,19 +1249,19 @@ static int rtl2831u_rc_query(struct dvb_usb_device *d)
if (buf[2] == (u8) ~buf[3]) {
if (buf[0] == (u8) ~buf[1]) {
/* NEC standard (16 bit) */
- rc_code = buf[0] << 8 | buf[2];
+ rc_code = RC_SCANCODE_NEC(buf[0], buf[2]);
} else {
/* NEC extended (24 bit) */
- rc_code = buf[0] << 16 |
- buf[1] << 8 | buf[2];
+ rc_code = RC_SCANCODE_NECX(buf[0] << 8 | buf[1],
+ buf[2]);
}
} else {
/* NEC full (32 bit) */
- rc_code = buf[0] << 24 | buf[1] << 16 |
- buf[2] << 8 | buf[3];
+ rc_code = RC_SCANCODE_NEC32(buf[0] << 24 | buf[1] << 16 |
+ buf[2] << 8 | buf[3]);
}
- rc_keydown(d->rc_dev, rc_code, 0);
+ rc_keydown(d->rc_dev, RC_TYPE_NEC, rc_code, 0);
ret = rtl28xx_wr_reg(d, SYS_IRRC_SR, 1);
if (ret)
@@ -674,7 +674,8 @@ static void dib0700_rc_urb_completion(struct urb *purb)
{
struct dvb_usb_device *d = purb->context;
struct dib0700_rc_response *poll_reply;
- u32 uninitialized_var(keycode);
+ enum rc_type protocol;
+ u32 uninitialized_var(scancode);
u8 toggle;
deb_info("%s()\n", __func__);
@@ -707,6 +708,7 @@ static void dib0700_rc_urb_completion(struct urb *purb)
switch (d->props.rc.core.protocol) {
case RC_BIT_NEC:
+ protocol = RC_TYPE_NEC;
toggle = 0;
/* NEC protocol sends repeat code as 0 0 0 FF */
@@ -719,19 +721,21 @@ static void dib0700_rc_urb_completion(struct urb *purb)
if ((poll_reply->system ^ poll_reply->not_system) != 0xff) {
deb_data("NEC extended protocol\n");
/* NEC extended code - 24 bits */
- keycode = be16_to_cpu(poll_reply->system16) << 8 | poll_reply->data;
+ scancode = RC_SCANCODE_NECX(be16_to_cpu(poll_reply->system16),
+ poll_reply->data);
} else {
deb_data("NEC normal protocol\n");
/* normal NEC code - 16 bits */
- keycode = poll_reply->system << 8 | poll_reply->data;
+ scancode = RC_SCANCODE_NEC(poll_reply->system,
+ poll_reply->data);
}
break;
default:
deb_data("RC5 protocol\n");
- /* RC5 Protocol */
+ protocol = RC_TYPE_RC5;
toggle = poll_reply->report_id;
- keycode = poll_reply->system << 8 | poll_reply->data;
+ scancode = RC_SCANCODE_RC5(poll_reply->system, poll_reply->data);
break;
}
@@ -744,7 +748,7 @@ static void dib0700_rc_urb_completion(struct urb *purb)
goto resubmit;
}
- rc_keydown(d->rc_dev, keycode, toggle);
+ rc_keydown(d->rc_dev, protocol, scancode, toggle);
resubmit:
/* Clean the buffer before we requeue */
@@ -489,7 +489,8 @@ static u8 rc_request[] = { REQUEST_POLL_RC, 0 };
static int dib0700_rc_query_old_firmware(struct dvb_usb_device *d)
{
u8 key[4];
- u32 keycode;
+ enum rc_type protocol;
+ u32 scancode;
u8 toggle;
int i;
struct dib0700_state *st = d->priv;
@@ -516,28 +517,29 @@ static int dib0700_rc_query_old_firmware(struct dvb_usb_device *d)
dib0700_rc_setup(d); /* reset ir sensor data to prevent false events */
- d->last_event = 0;
switch (d->props.rc.core.protocol) {
case RC_BIT_NEC:
/* NEC protocol sends repeat code as 0 0 0 FF */
if ((key[3-2] == 0x00) && (key[3-3] == 0x00) &&
- (key[3] == 0xff))
- keycode = d->last_event;
- else {
- keycode = key[3-2] << 8 | key[3-3];
- d->last_event = keycode;
+ (key[3] == 0xff)) {
+ rc_repeat(d->rc_dev);
+ return 0;
}
- rc_keydown(d->rc_dev, keycode, 0);
+ protocol = RC_TYPE_NEC;
+ scancode = RC_SCANCODE_NEC(key[3-2], key[3-3]);
+ toggle = 0;
break;
+
default:
/* RC-5 protocol changes toggle bit on new keypress */
- keycode = key[3-2] << 8 | key[3-3];
+ protocol = RC_TYPE_RC5;
+ scancode = RC_SCANCODE_RC5(key[3-2], key[3-3]);
toggle = key[3-1];
- rc_keydown(d->rc_dev, keycode, toggle);
-
break;
}
+
+ rc_keydown(d->rc_dev, protocol, scancode, toggle);
return 0;
}
@@ -1482,7 +1482,7 @@ static int dw2102_rc_query(struct dvb_usb_device *d)
if (msg.buf[0] != 0xff) {
deb_rc("%s: rc code: %x, %x\n",
__func__, key[0], key[1]);
- rc_keydown(d->rc_dev, key[0], 1);
+ rc_keydown(d->rc_dev, RC_TYPE_UNKNOWN, key[0], 0);
}
}
@@ -1503,7 +1503,7 @@ static int prof_rc_query(struct dvb_usb_device *d)
if (msg.buf[0] != 0xff) {
deb_rc("%s: rc code: %x, %x\n",
__func__, key[0], key[1]);
- rc_keydown(d->rc_dev, key[0]^0xff, 1);
+ rc_keydown(d->rc_dev, RC_TYPE_UNKNOWN, key[0]^0xff, 0);
}
}
@@ -1524,7 +1524,8 @@ static int su3000_rc_query(struct dvb_usb_device *d)
if (msg.buf[0] != 0xff) {
deb_rc("%s: rc code: %x, %x\n",
__func__, key[0], key[1]);
- rc_keydown(d->rc_dev, key[1] << 8 | key[0], 1);
+ rc_keydown(d->rc_dev, RC_TYPE_RC5,
+ RC_SCANCODE_RC5(key[1], key[0]), 0);
}
}
@@ -245,7 +245,7 @@ static int m920x_rc_core_query(struct dvb_usb_device *d)
else if (state == REMOTE_KEY_REPEAT)
rc_repeat(d->rc_dev);
else
- rc_keydown(d->rc_dev, rc_state[1], 0);
+ rc_keydown(d->rc_dev, RC_TYPE_UNKNOWN, rc_state[1], 0);
out:
kfree(rc_state);
@@ -565,12 +565,12 @@ static int pctv452e_rc_query(struct dvb_usb_device *d)
if ((rx[3] == 9) && (rx[12] & 0x01)) {
/* got a "press" event */
- state->last_rc_key = (rx[7] << 8) | rx[6];
+ state->last_rc_key = RC_SCANCODE_RC5(rx[7], rx[6]);
if (debug > 2)
info("%s: cmd=0x%02x sys=0x%02x\n",
__func__, rx[6], rx[7]);
- rc_keydown(d->rc_dev, state->last_rc_key, 0);
+ rc_keydown(d->rc_dev, RC_TYPE_RC5, state->last_rc_key, 0);
} else if (state->last_rc_key) {
rc_keyup(d->rc_dev);
state->last_rc_key = 0;
@@ -927,7 +927,7 @@ static struct dvb_usb_device_properties pctv452e_properties = {
.rc.core = {
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
- .allowed_protos = RC_BIT_UNKNOWN,
+ .allowed_protos = RC_BIT_RC5,
.rc_query = pctv452e_rc_query,
.rc_interval = 100,
},
@@ -980,7 +980,7 @@ static struct dvb_usb_device_properties tt_connect_s2_3600_properties = {
.rc.core = {
.rc_codes = RC_MAP_TT_1500,
- .allowed_protos = RC_BIT_UNKNOWN,
+ .allowed_protos = RC_BIT_RC5,
.rc_query = pctv452e_rc_query,
.rc_interval = 100,
},
@@ -438,9 +438,9 @@ static int tt3650_rc_query(struct dvb_usb_device *d)
if (rx[8] & 0x01) {
/* got a "press" event */
- st->last_rc_key = (rx[3] << 8) | rx[2];
+ st->last_rc_key = RC_SCANCODE_RC5(rx[3], rx[2]);
deb_info("%s: cmd=0x%02x sys=0x%02x\n", __func__, rx[2], rx[3]);
- rc_keydown(d->rc_dev, st->last_rc_key, rx[1]);
+ rc_keydown(d->rc_dev, RC_TYPE_RC5, st->last_rc_key, rx[1]);
} else if (st->last_rc_key) {
rc_keyup(d->rc_dev);
st->last_rc_key = 0;
@@ -747,7 +747,7 @@ static struct dvb_usb_device_properties ttusb2_properties_ct3650 = {
.rc_interval = 150, /* Less than IR_KEYPRESS_TIMEOUT */
.rc_codes = RC_MAP_TT_1500,
.rc_query = tt3650_rc_query,
- .allowed_protos = RC_BIT_UNKNOWN,
+ .allowed_protos = RC_BIT_RC5,
},
.num_adapters = 1,
@@ -27,6 +27,7 @@
#include <linux/interrupt.h>
#include <linux/usb.h>
#include <linux/slab.h>
+#include <linux/bitrev.h>
#include "em28xx.h"
@@ -53,6 +54,7 @@ struct em28xx_ir_poll_result {
unsigned int toggle_bit:1;
unsigned int read_count:7;
+ enum rc_type protocol;
u32 scancode;
};
@@ -72,7 +74,7 @@ struct em28xx_IR {
/* i2c slave address of external device (if used) */
u16 i2c_dev_addr;
- int (*get_key_i2c)(struct i2c_client *, u32 *);
+ int (*get_key_i2c)(struct i2c_client *ir, enum rc_type *protocol, u32 *scancode);
int (*get_key)(struct em28xx_IR *, struct em28xx_ir_poll_result *);
};
@@ -80,7 +82,8 @@ struct em28xx_IR {
I2C IR based get keycodes - should be used with ir-kbd-i2c
**********************************************************/
-static int em28xx_get_key_terratec(struct i2c_client *i2c_dev, u32 *ir_key)
+static int em28xx_get_key_terratec(struct i2c_client *i2c_dev,
+ enum rc_type *protocol, u32 *scancode)
{
unsigned char b;
@@ -98,14 +101,15 @@ static int em28xx_get_key_terratec(struct i2c_client *i2c_dev, u32 *ir_key)
/* keep old data */
return 1;
- *ir_key = b;
+ *protocol = RC_TYPE_UNKNOWN;
+ *scancode = b;
return 1;
}
-static int em28xx_get_key_em_haup(struct i2c_client *i2c_dev, u32 *ir_key)
+static int em28xx_get_key_em_haup(struct i2c_client *i2c_dev,
+ enum rc_type *protocol, u32 *scancode)
{
unsigned char buf[2];
- u16 code;
int size;
/* poll IR chip */
@@ -127,26 +131,13 @@ static int em28xx_get_key_em_haup(struct i2c_client *i2c_dev, u32 *ir_key)
* So, the code translation is not complete. Yet, it is enough to
* work with the provided RC5 IR.
*/
- code =
- ((buf[0] & 0x01) ? 0x0020 : 0) | /* 0010 0000 */
- ((buf[0] & 0x02) ? 0x0010 : 0) | /* 0001 0000 */
- ((buf[0] & 0x04) ? 0x0008 : 0) | /* 0000 1000 */
- ((buf[0] & 0x08) ? 0x0004 : 0) | /* 0000 0100 */
- ((buf[0] & 0x10) ? 0x0002 : 0) | /* 0000 0010 */
- ((buf[0] & 0x20) ? 0x0001 : 0) | /* 0000 0001 */
- ((buf[1] & 0x08) ? 0x1000 : 0) | /* 0001 0000 */
- ((buf[1] & 0x10) ? 0x0800 : 0) | /* 0000 1000 */
- ((buf[1] & 0x20) ? 0x0400 : 0) | /* 0000 0100 */
- ((buf[1] & 0x40) ? 0x0200 : 0) | /* 0000 0010 */
- ((buf[1] & 0x80) ? 0x0100 : 0); /* 0000 0001 */
-
- /* return key */
- *ir_key = code;
+ *protocol = RC_TYPE_RC5;
+ *scancode = (bitrev8(buf[1]) & 0x1f) << 8 | bitrev8(buf[0]) >> 2;
return 1;
}
static int em28xx_get_key_pinnacle_usb_grey(struct i2c_client *i2c_dev,
- u32 *ir_key)
+ enum rc_type *protocol, u32 *scancode)
{
unsigned char buf[3];
@@ -158,13 +149,13 @@ static int em28xx_get_key_pinnacle_usb_grey(struct i2c_client *i2c_dev,
if (buf[0] != 0x00)
return 0;
- *ir_key = buf[2]&0x3f;
-
+ *protocol = RC_TYPE_UNKNOWN;
+ *scancode = buf[2] & 0x3f;
return 1;
}
static int em28xx_get_key_winfast_usbii_deluxe(struct i2c_client *i2c_dev,
- u32 *ir_key)
+ enum rc_type *protocol, u32 *scancode)
{
unsigned char subaddr, keydetect, key;
@@ -184,7 +175,8 @@ static int em28xx_get_key_winfast_usbii_deluxe(struct i2c_client *i2c_dev,
if (key == 0x00)
return 0;
- *ir_key = key;
+ *protocol = RC_TYPE_UNKNOWN;
+ *scancode = key;
return 1;
}
@@ -215,7 +207,22 @@ static int default_polling_getkey(struct em28xx_IR *ir,
poll_result->read_count = (msg[0] & 0x7f);
/* Remote Control Address/Data (Regs 0x46/0x47) */
- poll_result->scancode = msg[1] << 8 | msg[2];
+ switch (ir->rc_type) {
+ case RC_BIT_RC5:
+ poll_result->protocol = RC_TYPE_RC5;
+ poll_result->scancode = RC_SCANCODE_RC5(msg[1], msg[2]);
+ break;
+
+ case RC_BIT_NEC:
+ poll_result->protocol = RC_TYPE_NEC;
+ poll_result->scancode = RC_SCANCODE_NEC(msg[1], msg[2]);
+ break;
+
+ default:
+ poll_result->protocol = RC_TYPE_UNKNOWN;
+ poll_result->scancode = msg[1] << 8 | msg[2];
+ break;
+ }
return 0;
}
@@ -247,25 +254,32 @@ static int em2874_polling_getkey(struct em28xx_IR *ir,
*/
switch (ir->rc_type) {
case RC_BIT_RC5:
- poll_result->scancode = msg[1] << 8 | msg[2];
+ poll_result->protocol = RC_TYPE_RC5;
+ poll_result->scancode = RC_SCANCODE_RC5(msg[1], msg[2]);
break;
+
case RC_BIT_NEC:
+ poll_result->protocol = RC_TYPE_RC5;
+ poll_result->scancode = msg[1] << 8 | msg[2];
if ((msg[3] ^ msg[4]) != 0xff) /* 32 bits NEC */
- poll_result->scancode = (msg[1] << 24) |
- (msg[2] << 16) |
- (msg[3] << 8) |
- msg[4];
+ poll_result->scancode = RC_SCANCODE_NEC32((msg[1] << 24) |
+ (msg[2] << 16) |
+ (msg[3] << 8) |
+ (msg[4]));
else if ((msg[1] ^ msg[2]) != 0xff) /* 24 bits NEC */
- poll_result->scancode = (msg[1] << 16) |
- (msg[2] << 8) |
- msg[3];
+ poll_result->scancode = RC_SCANCODE_NECX(msg[1] << 8 |
+ msg[2], msg[3]);
else /* Normal NEC */
- poll_result->scancode = msg[1] << 8 | msg[3];
+ poll_result->scancode = RC_SCANCODE_NEC(msg[1], msg[3]);
break;
+
case RC_BIT_RC6_0:
- poll_result->scancode = msg[1] << 8 | msg[2];
+ poll_result->protocol = RC_TYPE_RC6_0;
+ poll_result->scancode = RC_SCANCODE_RC6_0(msg[1], msg[2]);
break;
+
default:
+ poll_result->protocol = RC_TYPE_UNKNOWN;
poll_result->scancode = (msg[1] << 24) | (msg[2] << 16) |
(msg[3] << 8) | msg[4];
break;
@@ -281,22 +295,24 @@ static int em2874_polling_getkey(struct em28xx_IR *ir,
static int em28xx_i2c_ir_handle_key(struct em28xx_IR *ir)
{
struct em28xx *dev = ir->dev;
- static u32 ir_key;
+ static u32 scancode;
+ enum rc_type protocol;
int rc;
struct i2c_client client;
client.adapter = &ir->dev->i2c_adap[dev->def_i2c_bus];
client.addr = ir->i2c_dev_addr;
- rc = ir->get_key_i2c(&client, &ir_key);
+ rc = ir->get_key_i2c(&client, &protocol, &scancode);
if (rc < 0) {
dprintk("ir->get_key_i2c() failed: %d\n", rc);
return rc;
}
if (rc) {
- dprintk("%s: keycode = 0x%04x\n", __func__, ir_key);
- rc_keydown(ir->rc, ir_key, 0);
+ dprintk("%s: proto = 0x%04x, scancode = 0x%04x\n",
+ __func__, protocol, scancode);
+ rc_keydown(ir->rc, protocol, scancode, 0);
}
return 0;
}
@@ -319,10 +335,12 @@ static void em28xx_ir_handle_key(struct em28xx_IR *ir)
poll_result.scancode);
if (ir->full_code)
rc_keydown(ir->rc,
+ poll_result.protocol,
poll_result.scancode,
poll_result.toggle_bit);
else
rc_keydown(ir->rc,
+ RC_TYPE_UNKNOWN,
poll_result.scancode & 0xff,
poll_result.toggle_bit);
@@ -162,11 +162,42 @@ static int tm6000_ir_config(struct tm6000_IR *ir)
return 0;
}
+static void tm6000_ir_keydown(struct tm6000_IR *ir,
+ const char *buf, unsigned int len)
+{
+ u8 device, command;
+ u32 scancode;
+ enum rc_type protocol;
+
+ if (len < 1)
+ return;
+
+ command = buf[0];
+ device = (len > 1 ? buf[1] : 0x0);
+ switch (ir->rc_type) {
+ case RC_BIT_RC5:
+ protocol = RC_TYPE_RC5;
+ scancode = RC_SCANCODE_RC5(device, command);
+ break;
+ case RC_BIT_NEC:
+ protocol = RC_TYPE_NEC;
+ scancode = RC_SCANCODE_NEC(device, command);
+ break;
+ default:
+ protocol = RC_TYPE_OTHER;
+ scancode = RC_SCANCODE_OTHER(device << 8 | command);
+ break;
+ }
+
+ dprintk(1, "%s, protocol: 0x%04x, scancode: 0x%08x\n",
+ __func__, protocol, scancode);
+ rc_keydown(ir->rc, protocol, scancode, 0);
+}
+
static void tm6000_ir_urb_received(struct urb *urb)
{
struct tm6000_core *dev = urb->context;
struct tm6000_IR *ir = dev->ir;
- struct tm6000_ir_poll_result poll_result;
char *buf;
dprintk(2, "%s\n",__func__);
@@ -184,12 +215,7 @@ static void tm6000_ir_urb_received(struct urb *urb)
DUMP_PREFIX_OFFSET,16, 1,
buf, urb->actual_length, false);
- poll_result.rc_data = buf[0];
- if (urb->actual_length > 1)
- poll_result.rc_data |= buf[1] << 8;
-
- dprintk(1, "%s, scancode: 0x%04x\n",__func__, poll_result.rc_data);
- rc_keydown(ir->rc, poll_result.rc_data, 0);
+ tm6000_ir_keydown(ir, urb->transfer_buffer, urb->actual_length);
usb_submit_urb(urb, GFP_ATOMIC);
/*
@@ -204,7 +230,6 @@ static void tm6000_ir_handle_key(struct work_struct *work)
{
struct tm6000_IR *ir = container_of(work, struct tm6000_IR, work.work);
struct tm6000_core *dev = ir->dev;
- struct tm6000_ir_poll_result poll_result;
int rc;
u8 buf[2];
@@ -219,13 +244,8 @@ static void tm6000_ir_handle_key(struct work_struct *work)
if (rc < 0)
return;
- if (rc > 1)
- poll_result.rc_data = buf[0] | buf[1] << 8;
- else
- poll_result.rc_data = buf[0];
-
/* Check if something was read */
- if ((poll_result.rc_data & 0xff) == 0xff) {
+ if ((buf[0] & 0xff) == 0xff) {
if (!ir->pwled) {
tm6000_flash_led(dev, 1);
ir->pwled = 1;
@@ -233,8 +253,7 @@ static void tm6000_ir_handle_key(struct work_struct *work)
return;
}
- dprintk(1, "%s, scancode: 0x%04x\n",__func__, poll_result.rc_data);
- rc_keydown(ir->rc, poll_result.rc_data, 0);
+ tm6000_ir_keydown(ir, buf, rc);
tm6000_flash_led(dev, 0);
ir->pwled = 0;
@@ -88,6 +88,7 @@ enum rc_filter_type {
* @keyup_jiffies: time (in jiffies) when the current keypress should be released
* @timer_keyup: timer for releasing a keypress
* @last_keycode: keycode of last keypress
+ * @last_protocol: protocol of last keypress
* @last_scancode: scancode of last keypress
* @last_toggle: toggle value of last command
* @timeout: optional time after which device stops sending data
@@ -138,6 +139,7 @@ struct rc_dev {
unsigned long keyup_jiffies;
struct timer_list timer_keyup;
u32 last_keycode;
+ enum rc_type last_protocol;
u32 last_scancode;
u8 last_toggle;
u32 timeout;
@@ -217,8 +219,8 @@ int rc_open(struct rc_dev *rdev);
void rc_close(struct rc_dev *rdev);
void rc_repeat(struct rc_dev *dev);
-void rc_keydown(struct rc_dev *dev, int scancode, u8 toggle);
-void rc_keydown_notimeout(struct rc_dev *dev, int scancode, u8 toggle);
+void rc_keydown(struct rc_dev *dev, enum rc_type protocol, u32 scancode, u8 toggle);
+void rc_keydown_notimeout(struct rc_dev *dev, enum rc_type protocol, u32 scancode, u8 toggle);
void rc_keyup(struct rc_dev *dev);
u32 rc_g_keycode_from_table(struct rc_dev *dev, u32 scancode);
Right now the protocol information is not preserved, rc-core gets handed a scancode but has no idea which protocol it corresponds to. This patch (which required reading through the source/keymap for all drivers, not fun) makes the protocol information explicit which is important documentation and makes it easier to e.g. support multiple protocols with one decoder (think rc5 and rc-streamzap). The information isn't used yet so there should be no functional changes. Signed-off-by: David Härdeman <david@hardeman.nu> --- drivers/media/i2c/ir-kbd-i2c.c | 5 + drivers/media/pci/bt8xx/bttv-input.c | 12 ++- drivers/media/pci/cx88/cx88-input.c | 26 ++++++- drivers/media/pci/dm1105/dm1105.c | 3 + drivers/media/pci/saa7134/saa7134-input.c | 6 +- drivers/media/pci/ttpci/budget-ci.c | 8 +- drivers/media/rc/ati_remote.c | 4 + drivers/media/rc/img-ir/img-ir-hw.c | 8 +- drivers/media/rc/img-ir/img-ir-hw.h | 3 + drivers/media/rc/img-ir/img-ir-jvc.c | 4 + drivers/media/rc/img-ir/img-ir-nec.c | 4 + drivers/media/rc/img-ir/img-ir-sanyo.c | 4 + drivers/media/rc/img-ir/img-ir-sharp.c | 4 + drivers/media/rc/img-ir/img-ir-sony.c | 12 ++- drivers/media/rc/imon.c | 5 + drivers/media/rc/ir-jvc-decoder.c | 2 - drivers/media/rc/ir-nec-decoder.c | 2 - drivers/media/rc/ir-rc5-decoder.c | 5 + drivers/media/rc/ir-rc5-sz-decoder.c | 2 - drivers/media/rc/ir-rc6-decoder.c | 37 ++++++++-- drivers/media/rc/ir-sanyo-decoder.c | 2 - drivers/media/rc/ir-sharp-decoder.c | 2 - drivers/media/rc/ir-sony-decoder.c | 6 +- drivers/media/rc/rc-main.c | 32 +++++---- drivers/media/usb/dvb-usb-v2/af9015.c | 18 +++-- drivers/media/usb/dvb-usb-v2/af9035.c | 9 +- drivers/media/usb/dvb-usb-v2/anysee.c | 3 + drivers/media/usb/dvb-usb-v2/az6007.c | 25 ++++--- drivers/media/usb/dvb-usb-v2/lmedm04.c | 9 +- drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 12 ++- drivers/media/usb/dvb-usb/dib0700_core.c | 16 +++- drivers/media/usb/dvb-usb/dib0700_devices.c | 24 ++++--- drivers/media/usb/dvb-usb/dw2102.c | 7 +- drivers/media/usb/dvb-usb/m920x.c | 2 - drivers/media/usb/dvb-usb/pctv452e.c | 8 +- drivers/media/usb/dvb-usb/ttusb2.c | 6 +- drivers/media/usb/em28xx/em28xx-input.c | 98 ++++++++++++++++----------- drivers/media/usb/tm6000/tm6000-input.c | 51 ++++++++++---- include/media/rc-core.h | 6 +- 39 files changed, 307 insertions(+), 185 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html