@@ -5,6 +5,7 @@
*/
#include "img-ir-hw.h"
+#include <linux/bitrev.h>
/* Convert NEC data to a scancode */
static int img_ir_nec_scancode(int len, u64 raw, enum rc_type *protocol,
@@ -23,11 +24,11 @@ static int img_ir_nec_scancode(int len, u64 raw, enum rc_type *protocol,
data_inv = (raw >> 24) & 0xff;
if ((data_inv ^ data) != 0xff) {
/* 32-bit NEC (used by Apple and TiVo remotes) */
- /* scan encoding: aaAAddDD */
- *scancode = addr_inv << 24 |
- addr << 16 |
- data_inv << 8 |
- data;
+ /* scan encoding: AAaaDDdd (LSBit first) */
+ *scancode = bitrev8(addr) << 24 |
+ bitrev8(addr_inv) << 16 |
+ bitrev8(data) << 8 |
+ bitrev8(data_inv);
} else if ((addr_inv ^ addr) != 0xff) {
/* Extended NEC */
/* scan encoding: AAaaDD */
@@ -56,13 +57,15 @@ static int img_ir_nec_filter(const struct rc_scancode_filter *in,
if ((in->data | in->mask) & 0xff000000) {
/* 32-bit NEC (used by Apple and TiVo remotes) */
- /* scan encoding: aaAAddDD */
- addr_inv = (in->data >> 24) & 0xff;
- addr_inv_m = (in->mask >> 24) & 0xff;
- addr = (in->data >> 16) & 0xff;
- addr_m = (in->mask >> 16) & 0xff;
- data_inv = (in->data >> 8) & 0xff;
- data_inv_m = (in->mask >> 8) & 0xff;
+ /* scan encoding: AAaaDDdd (LSBit first) */
+ addr = bitrev8(in->data >> 24);
+ addr_m = bitrev8(in->mask >> 24);
+ addr_inv = bitrev8(in->data >> 16);
+ addr_inv_m = bitrev8(in->mask >> 16);
+ data = bitrev8(in->data >> 8);
+ data_m = bitrev8(in->mask >> 8);
+ data_inv = bitrev8(in->data >> 0);
+ data_inv_m = bitrev8(in->mask >> 0);
} else if ((in->data | in->mask) & 0x00ff0000) {
/* Extended NEC */
/* scan encoding AAaaDD */
@@ -172,10 +172,7 @@ static int ir_nec_decode(struct rc_dev *dev, struct ir_raw_event ev)
if (send_32bits) {
/* NEC transport, but modified protocol, used by at
* least Apple and TiVo remotes */
- scancode = not_address << 24 |
- address << 16 |
- not_command << 8 |
- command;
+ scancode = data->bits;
IR_dprintk(1, "NEC (modified) scancode 0x%08x\n", scancode);
} else if ((address ^ not_address) != 0xff) {
/* Extended NEC */
@@ -15,62 +15,62 @@
* Initial mapping is for the TiVo remote included in the Nero LiquidTV bundle,
* which also ships with a TiVo-branded IR transceiver, supported by the mceusb
* driver. Note that the remote uses an NEC-ish protocol, but instead of having
- * a command/not_command pair, it has a vendor ID of 0x3085, but some keys, the
+ * a command/not_command pair, it has a vendor ID of 0xa10c, but some keys, the
* NEC extended checksums do pass, so the table presently has the intended
* values and the checksum-passed versions for those keys.
*/
static struct rc_map_table tivo[] = {
- { 0x3085f009, KEY_MEDIA }, /* TiVo Button */
- { 0x3085e010, KEY_POWER2 }, /* TV Power */
- { 0x3085e011, KEY_TV }, /* Live TV/Swap */
- { 0x3085c034, KEY_VIDEO_NEXT }, /* TV Input */
- { 0x3085e013, KEY_INFO },
- { 0x3085a05f, KEY_CYCLEWINDOWS }, /* Window */
+ { 0xa10c900f, KEY_MEDIA }, /* TiVo Button */
+ { 0xa10c0807, KEY_POWER2 }, /* TV Power */
+ { 0xa10c8807, KEY_TV }, /* Live TV/Swap */
+ { 0xa10c2c03, KEY_VIDEO_NEXT }, /* TV Input */
+ { 0xa10cc807, KEY_INFO },
+ { 0xa10cfa05, KEY_CYCLEWINDOWS }, /* Window */
{ 0x0085305f, KEY_CYCLEWINDOWS },
- { 0x3085c036, KEY_EPG }, /* Guide */
+ { 0xa10c6c03, KEY_EPG }, /* Guide */
- { 0x3085e014, KEY_UP },
- { 0x3085e016, KEY_DOWN },
- { 0x3085e017, KEY_LEFT },
- { 0x3085e015, KEY_RIGHT },
+ { 0xa10c2807, KEY_UP },
+ { 0xa10c6807, KEY_DOWN },
+ { 0xa10ce807, KEY_LEFT },
+ { 0xa10ca807, KEY_RIGHT },
- { 0x3085e018, KEY_SCROLLDOWN }, /* Red Thumbs Down */
- { 0x3085e019, KEY_SELECT },
- { 0x3085e01a, KEY_SCROLLUP }, /* Green Thumbs Up */
+ { 0xa10c1807, KEY_SCROLLDOWN }, /* Red Thumbs Down */
+ { 0xa10c9807, KEY_SELECT },
+ { 0xa10c5807, KEY_SCROLLUP }, /* Green Thumbs Up */
- { 0x3085e01c, KEY_VOLUMEUP },
- { 0x3085e01d, KEY_VOLUMEDOWN },
- { 0x3085e01b, KEY_MUTE },
- { 0x3085d020, KEY_RECORD },
- { 0x3085e01e, KEY_CHANNELUP },
- { 0x3085e01f, KEY_CHANNELDOWN },
+ { 0xa10c3807, KEY_VOLUMEUP },
+ { 0xa10cb807, KEY_VOLUMEDOWN },
+ { 0xa10cd807, KEY_MUTE },
+ { 0xa10c040b, KEY_RECORD },
+ { 0xa10c7807, KEY_CHANNELUP },
+ { 0xa10cf807, KEY_CHANNELDOWN },
{ 0x0085301f, KEY_CHANNELDOWN },
- { 0x3085d021, KEY_PLAY },
- { 0x3085d023, KEY_PAUSE },
- { 0x3085d025, KEY_SLOW },
- { 0x3085d022, KEY_REWIND },
- { 0x3085d024, KEY_FASTFORWARD },
- { 0x3085d026, KEY_PREVIOUS },
- { 0x3085d027, KEY_NEXT }, /* ->| */
+ { 0xa10c840b, KEY_PLAY },
+ { 0xa10cc40b, KEY_PAUSE },
+ { 0xa10ca40b, KEY_SLOW },
+ { 0xa10c440b, KEY_REWIND },
+ { 0xa10c240b, KEY_FASTFORWARD },
+ { 0xa10c640b, KEY_PREVIOUS },
+ { 0xa10ce40b, KEY_NEXT }, /* ->| */
- { 0x3085b044, KEY_ZOOM }, /* Aspect */
- { 0x3085b048, KEY_STOP },
- { 0x3085b04a, KEY_DVD }, /* DVD Menu */
+ { 0xa10c220d, KEY_ZOOM }, /* Aspect */
+ { 0xa10c120d, KEY_STOP },
+ { 0xa10c520d, KEY_DVD }, /* DVD Menu */
- { 0x3085d028, KEY_NUMERIC_1 },
- { 0x3085d029, KEY_NUMERIC_2 },
- { 0x3085d02a, KEY_NUMERIC_3 },
- { 0x3085d02b, KEY_NUMERIC_4 },
- { 0x3085d02c, KEY_NUMERIC_5 },
- { 0x3085d02d, KEY_NUMERIC_6 },
- { 0x3085d02e, KEY_NUMERIC_7 },
- { 0x3085d02f, KEY_NUMERIC_8 },
+ { 0xa10c140b, KEY_NUMERIC_1 },
+ { 0xa10c940b, KEY_NUMERIC_2 },
+ { 0xa10c540b, KEY_NUMERIC_3 },
+ { 0xa10cd40b, KEY_NUMERIC_4 },
+ { 0xa10c340b, KEY_NUMERIC_5 },
+ { 0xa10cb40b, KEY_NUMERIC_6 },
+ { 0xa10c740b, KEY_NUMERIC_7 },
+ { 0xa10cf40b, KEY_NUMERIC_8 },
{ 0x0085302f, KEY_NUMERIC_8 },
- { 0x3085c030, KEY_NUMERIC_9 },
- { 0x3085c031, KEY_NUMERIC_0 },
- { 0x3085c033, KEY_ENTER },
- { 0x3085c032, KEY_CLEAR },
+ { 0xa10c0c03, KEY_NUMERIC_9 },
+ { 0xa10c8c03, KEY_NUMERIC_0 },
+ { 0xa10ccc03, KEY_ENTER },
+ { 0xa10c4c03, KEY_CLEAR },
};
static struct rc_map_list tivo_map = {
This reverts 18bc17448147e93f31cc9b1a83be49f1224657b2 The patch ignores the fact that NEC32 scancodes are generated not only in the NEC raw decoder but also directly in some drivers. Whichever approach is chosen it should be consistent across drivers and this patch needs more discussion. Furthermore, I'm convinced that we have to stop playing games trying to decipher the "meaning" of NEC scancodes (what's the customer/vendor/address, which byte is the MSB, etc). This patch is in preparation for the next few patches in this series. v2: make sure img-ir scancodes are bitrev8():ed as well Signed-off-by: David Härdeman <david@hardeman.nu> --- drivers/media/rc/img-ir/img-ir-nec.c | 27 ++++++----- drivers/media/rc/ir-nec-decoder.c | 5 -- drivers/media/rc/keymaps/rc-tivo.c | 86 +++++++++++++++++----------------- 3 files changed, 59 insertions(+), 59 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html