@@ -41,6 +41,7 @@ obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t-pci.o \
rc-flyvideo.o \
rc-fusionhdtv-mce.o \
rc-gadmei-rm008z.o \
+ rc-geekbox.o \
rc-genius-tvgo-a11mce.o \
rc-gotview7135.o \
rc-imon-mce.o \
new file mode 100644
@@ -0,0 +1,55 @@
+/*
+ * Keytable for the GeekBox remote controller
+ *
+ * Copyright (C) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <media/rc-map.h>
+#include <linux/module.h>
+
+static struct rc_map_table geekbox[] = {
+ { 0x01, KEY_BACK },
+ { 0x02, KEY_DOWN },
+ { 0x03, KEY_UP },
+ { 0x07, KEY_OK },
+ { 0x0b, KEY_VOLUMEUP },
+ { 0x0e, KEY_LEFT },
+ { 0x13, KEY_MENU },
+ { 0x14, KEY_POWER },
+ { 0x1a, KEY_RIGHT },
+ { 0x48, KEY_HOME },
+ { 0x58, KEY_VOLUMEDOWN },
+ { 0x5c, KEY_SCREEN },
+};
+
+static struct rc_map_list geekbox_map = {
+ .map = {
+ .scan = geekbox,
+ .size = ARRAY_SIZE(geekbox),
+ .rc_type = RC_TYPE_NEC,
+ .name = RC_MAP_GEEKBOX,
+ }
+};
+
+static int __init init_rc_map_geekbox(void)
+{
+ return rc_map_register(&geekbox_map);
+}
+
+static void __exit exit_rc_map_geekbox(void)
+{
+ rc_map_unregister(&geekbox_map);
+}
+
+module_init(init_rc_map_geekbox)
+module_exit(exit_rc_map_geekbox)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
@@ -219,6 +219,7 @@ struct rc_map *rc_map_get(const char *name);
#define RC_MAP_FLYVIDEO "rc-flyvideo"
#define RC_MAP_FUSIONHDTV_MCE "rc-fusionhdtv-mce"
#define RC_MAP_GADMEI_RM008Z "rc-gadmei-rm008z"
+#define RC_MAP_GEEKBOX "rc-geekbox"
#define RC_MAP_GENIUS_TVGO_A11MCE "rc-genius-tvgo-a11mce"
#define RC_MAP_GOTVIEW7135 "rc-gotview7135"
#define RC_MAP_HAUPPAUGE_NEW "rc-hauppauge"
The GeekBox ships with a 12 button remote control which seems to use the NEC protocol. The button keycodes were captured with the "ir-keytable" tool (ir-keytable -p $PROTOCOL -t; human_button_pusher). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> --- drivers/media/rc/keymaps/Makefile | 1 + drivers/media/rc/keymaps/rc-geekbox.c | 55 +++++++++++++++++++++++++++++++++++ include/media/rc-map.h | 1 + 3 files changed, 57 insertions(+) create mode 100644 drivers/media/rc/keymaps/rc-geekbox.c