@@ -52,6 +52,8 @@ config VIDEO_CX231XX_DVB
select DVB_SI2165 if MEDIA_SUBDRV_AUTOSELECT
select DVB_SI2168 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_SI2157 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_MN88473 if MEDIA_SUBDRV_AUTOSELECT
+ select MEDIA_TUNER_R820T if MEDIA_SUBDRV_AUTOSELECT
---help---
This adds support for DVB cards based on the
@@ -868,6 +868,33 @@ struct cx231xx_board cx231xx_boards[] = {
.amux = CX231XX_AMUX_LINE_IN,
} },
},
+ [CX231XX_BOARD_ASTROMETA_T2HYBRID] = {
+ .name = "Astrometa T2hybrid",
+ .tuner_type = TUNER_ABSENT,
+ .has_dvb = 1,
+ .output_mode = OUT_MODE_VIP11,
+ .agc_analog_digital_select_gpio = 0x01,
+ .ctl_pin_status_mask = 0xffffffc4,
+ .demod_addr = 0x18, /* 0x30 >> 1 */
+ .demod_i2c_master = I2C_1_MUX_1,
+ .gpio_pin_status_mask = 0xa,
+ .norm = V4L2_STD_NTSC,
+ .tuner_addr = 0x3a, /* 0x74 >> 1 */
+ .tuner_i2c_master = I2C_1_MUX_3,
+ .tuner_scl_gpio = 0x1a,
+ .tuner_sda_gpio = 0x1b,
+ .tuner_sif_gpio = 0x05,
+ .input = {{
+ .type = CX231XX_VMUX_TELEVISION,
+ .vmux = CX231XX_VIN_1_1,
+ .amux = CX231XX_AMUX_VIDEO,
+ }, {
+ .type = CX231XX_VMUX_COMPOSITE1,
+ .vmux = CX231XX_VIN_2_1,
+ .amux = CX231XX_AMUX_LINE_IN,
+ },
+ },
+ },
};
const unsigned int cx231xx_bcount = ARRAY_SIZE(cx231xx_boards);
@@ -937,6 +964,8 @@ struct usb_device_id cx231xx_id_table[] = {
.driver_info = CX231XX_BOARD_TERRATEC_GRABBY},
{USB_DEVICE(0x1b80, 0xd3b2),
.driver_info = CX231XX_BOARD_EVROMEDIA_FULL_HYBRID_FULLHD},
+ {USB_DEVICE(0x15f4, 0x0135),
+ .driver_info = CX231XX_BOARD_ASTROMETA_T2HYBRID},
{},
};
@@ -1013,6 +1042,11 @@ void cx231xx_pre_card_setup(struct cx231xx *dev)
dev_info(dev->dev, "Identified as %s (card=%d)\n",
dev->board.name, dev->model);
+ if (CX231XX_BOARD_ASTROMETA_T2HYBRID == dev->model) {
+ /* turn on demodulator chip */
+ cx231xx_set_gpio_value(dev, 0x03, 0x01);
+ }
+
/* set the direction for GPIO pins */
if (dev->board.tuner_gpio) {
cx231xx_set_gpio_direction(dev, dev->board.tuner_gpio->bit, 1);
@@ -37,6 +37,8 @@
#include "mb86a20s.h"
#include "si2157.h"
#include "lgdt3306a.h"
+#include "r820t.h"
+#include "mn88473.h"
MODULE_DESCRIPTION("driver for cx231xx based DVB cards");
MODULE_AUTHOR("Srinivasa Deevi <srinivasa.deevi@conexant.com>");
@@ -164,6 +166,13 @@ static struct lgdt3306a_config hauppauge_955q_lgdt3306a_config = {
.xtalMHz = 25,
};
+static struct r820t_config astrometa_t2hybrid_r820t_config = {
+ .i2c_addr = 0x3a, /* 0x74 >> 1 */
+ .xtal = 16000000,
+ .rafael_chip = CHIP_R828D,
+ .max_i2c_msg_len = 2,
+};
+
static inline void print_err_status(struct cx231xx *dev, int packet, int status)
{
char *errmsg = "Unknown";
@@ -1019,6 +1028,46 @@ static int dvb_init(struct cx231xx *dev)
dev->dvb->i2c_client_tuner = client;
break;
}
+ case CX231XX_BOARD_ASTROMETA_T2HYBRID:
+ {
+ struct i2c_client *client;
+ struct i2c_board_info info = {};
+ struct mn88473_config mn88473_config = {};
+
+ /* attach demodulator chip */
+ mn88473_config.i2c_wr_max = 16;
+ mn88473_config.xtal = 25000000;
+ mn88473_config.fe = &dev->dvb->frontend;
+
+ strlcpy(info.type, "mn88473", sizeof(info.type));
+ info.addr = dev->board.demod_addr;
+ info.platform_data = &mn88473_config;
+
+ request_module(info.type);
+ client = i2c_new_device(demod_i2c, &info);
+
+ if (client == NULL || client->dev.driver == NULL) {
+ result = -ENODEV;
+ goto out_free;
+ }
+
+ if (!try_module_get(client->dev.driver->owner)) {
+ i2c_unregister_device(client);
+ result = -ENODEV;
+ goto out_free;
+ }
+
+ dvb->i2c_client_demod = client;
+
+ /* define general-purpose callback pointer */
+ dvb->frontend->callback = cx231xx_tuner_callback;
+
+ /* attach tuner chip */
+ dvb_attach(r820t_attach, dev->dvb->frontend,
+ tuner_i2c,
+ &astrometa_t2hybrid_r820t_config);
+ break;
+ }
default:
dev_err(dev->dev,
"%s/2: The frontend of your DVB/ATSC card isn't supported yet\n",
@@ -79,6 +79,7 @@
#define CX231XX_BOARD_HAUPPAUGE_955Q 21
#define CX231XX_BOARD_TERRATEC_GRABBY 22
#define CX231XX_BOARD_EVROMEDIA_FULL_HYBRID_FULLHD 23
+#define CX231XX_BOARD_ASTROMETA_T2HYBRID 24
/* Limits minimum and default number of buffers */
#define CX231XX_MIN_BUF 4
This patch provide only digital support; The device is based on 24C02N EEPROM, Panasonic MN88473 demodulator, Rafael Micro R828D tuner and CX23102-11Z chipset; USB id: 15f4:0135. Status: - DVB-T/T2 works fine; - Composite works fine; - Analog not implemented. Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> --- drivers/media/usb/cx231xx/Kconfig | 2 ++ drivers/media/usb/cx231xx/cx231xx-cards.c | 34 +++++++++++++++++++++ drivers/media/usb/cx231xx/cx231xx-dvb.c | 49 +++++++++++++++++++++++++++++++ drivers/media/usb/cx231xx/cx231xx.h | 1 + 4 files changed, 86 insertions(+)