| Message ID | 20171012192719.15193-2-bparrot@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
* Benoit Parrot <bparrot@ti.com> [171012 12:29]: > This patch adds the required dtsi node to support the Camera > Adaptation Layer (CAL) for the DRA72 family of devices. > > - Added CAL entry in dra72x.dtsi. > > Signed-off-by: Benoit Parrot <bparrot@ti.com> > --- > arch/arm/boot/dts/dra72x.dtsi | 31 +++++++++++++++++++++++++++++++ > 1 file changed, 31 insertions(+) > > diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi > index 67107605fb4c..d0ba4f238084 100644 > --- a/arch/arm/boot/dts/dra72x.dtsi > +++ b/arch/arm/boot/dts/dra72x.dtsi > @@ -17,6 +17,37 @@ > interrupt-parent = <&wakeupgen>; > interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; > }; > + > + ocp { > + cal: cal@4845b000 { > + compatible = "ti,dra72-cal"; > + ti,hwmods = "cal"; > + reg = <0x4845B000 0x400>, > + <0x4845B800 0x40>, > + <0x4845B900 0x40>, > + <0x4A002e94 0x4>; Care to fix the cAmelcasing here? All lower case hex is pretty much the standard with linux, so might as well lower case them all while at it. Regards, Tony
Tony Lindgren <tony@atomide.com> wrote on Fri [2017-Oct-13 09:54:09 -0700]: > * Benoit Parrot <bparrot@ti.com> [171012 12:29]: > > This patch adds the required dtsi node to support the Camera > > Adaptation Layer (CAL) for the DRA72 family of devices. > > > > - Added CAL entry in dra72x.dtsi. > > > > Signed-off-by: Benoit Parrot <bparrot@ti.com> > > --- > > arch/arm/boot/dts/dra72x.dtsi | 31 +++++++++++++++++++++++++++++++ > > 1 file changed, 31 insertions(+) > > > > diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi > > index 67107605fb4c..d0ba4f238084 100644 > > --- a/arch/arm/boot/dts/dra72x.dtsi > > +++ b/arch/arm/boot/dts/dra72x.dtsi > > @@ -17,6 +17,37 @@ > > interrupt-parent = <&wakeupgen>; > > interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; > > }; > > + > > + ocp { > > + cal: cal@4845b000 { > > + compatible = "ti,dra72-cal"; > > + ti,hwmods = "cal"; > > + reg = <0x4845B000 0x400>, > > + <0x4845B800 0x40>, > > + <0x4845B900 0x40>, > > + <0x4A002e94 0x4>; > > Care to fix the cAmelcasing here? All lower case hex is pretty much the > standard with linux, so might as well lower case them all while at it. Sure thing, I'll fix it. Benoit > > Regards, > > Tony
diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi index 67107605fb4c..d0ba4f238084 100644 --- a/arch/arm/boot/dts/dra72x.dtsi +++ b/arch/arm/boot/dts/dra72x.dtsi @@ -17,6 +17,37 @@ interrupt-parent = <&wakeupgen>; interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; }; + + ocp { + cal: cal@4845b000 { + compatible = "ti,dra72-cal"; + ti,hwmods = "cal"; + reg = <0x4845B000 0x400>, + <0x4845B800 0x40>, + <0x4845B900 0x40>, + <0x4A002e94 0x4>; + reg-names = "cal_top", + "cal_rx_core0", + "cal_rx_core1", + "camerrx_control"; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi2_0: port@0 { + reg = <0>; + }; + csi2_1: port@1 { + reg = <1>; + }; + }; + }; + }; }; &dss {
This patch adds the required dtsi node to support the Camera Adaptation Layer (CAL) for the DRA72 family of devices. - Added CAL entry in dra72x.dtsi. Signed-off-by: Benoit Parrot <bparrot@ti.com> --- arch/arm/boot/dts/dra72x.dtsi | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+)