diff mbox

[media] mceusb: add support for 1b80:d3b2

Message ID 20171028104039.15125-1-oleg@kaa.org.ua (mailing list archive)
State New, archived
Headers show

Commit Message

Oleh Kravchenko Oct. 28, 2017, 10:40 a.m. UTC 
Evromedia USB Full Hybrid Full HD (1b80:d3b2) has IR on Interface 0.
Remote controller supplied with this tuner fully compatible
with RC_MAP_MSI_DIGIVOX_III.

Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua>
---
 drivers/media/rc/mceusb.c                 | 9 +++++++++
 drivers/media/usb/cx231xx/cx231xx-cards.c | 1 -
 2 files changed, 9 insertions(+), 1 deletion(-)
diff mbox

Patch

diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c
index eb130694bbb8..a12941d2f4f0 100644
--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -188,6 +188,7 @@  enum mceusb_model_type {
 	TIVO_KIT,
 	MCE_GEN2_NO_TX,
 	HAUPPAUGE_CX_HYBRID_TV,
+	EVROMEDIA_FULL_HYBRID_FULLHD,
 };
 
 struct mceusb_model {
@@ -247,6 +248,11 @@  static const struct mceusb_model mceusb_model[] = {
 		.mce_gen2 = 1,
 		.rc_map = RC_MAP_TIVO,
 	},
+	[EVROMEDIA_FULL_HYBRID_FULLHD] = {
+		.name = "Evromedia USB Full Hybrid Full HD",
+		.no_tx = 1,
+		.rc_map = RC_MAP_MSI_DIGIVOX_III,
+	},
 };
 
 static struct usb_device_id mceusb_dev_table[] = {
@@ -398,6 +404,9 @@  static struct usb_device_id mceusb_dev_table[] = {
 	  .driver_info = HAUPPAUGE_CX_HYBRID_TV },
 	/* Adaptec / HP eHome Receiver */
 	{ USB_DEVICE(VENDOR_ADAPTEC, 0x0094) },
+	/* Evromedia USB Full Hybrid Full HD */
+	{ USB_DEVICE(0x1b80, 0xd3b2),
+	  .driver_info = EVROMEDIA_FULL_HYBRID_FULLHD },
 
 	/* Terminating entry */
 	{ }
diff --git a/drivers/media/usb/cx231xx/cx231xx-cards.c b/drivers/media/usb/cx231xx/cx231xx-cards.c
index e0daa9b6c2a0..f327ae73c1f0 100644
--- a/drivers/media/usb/cx231xx/cx231xx-cards.c
+++ b/drivers/media/usb/cx231xx/cx231xx-cards.c
@@ -847,7 +847,6 @@  struct cx231xx_board cx231xx_boards[] = {
 		.demod_addr = 0x64, /* 0xc8 >> 1 */
 		.demod_i2c_master = I2C_1_MUX_3,
 		.has_dvb = 1,
-		.ir_i2c_master = I2C_0,
 		.norm = V4L2_STD_PAL,
 		.output_mode = OUT_MODE_VIP11,
 		.tuner_addr = 0x60, /* 0xc0 >> 1 */