@@ -82,6 +82,7 @@ static int ad5823_i2c_write(struct i2c_client *client, u8 reg, u8 val)
{
struct i2c_msg msg;
u8 buf[2];
+
buf[0] = reg;
buf[1] = val;
msg.addr = AD5823_VCM_ADDR;
@@ -98,6 +99,7 @@ static int ad5823_i2c_read(struct i2c_client *client, u8 reg, u8 *val)
{
struct i2c_msg msg[2];
u8 buf[2];
+
buf[0] = reg;
buf[1] = 0;
@@ -228,6 +230,7 @@ static int vcm_detect(struct i2c_client *client)
int i, ret;
struct i2c_msg msg;
u16 data0 = 0, data;
+
for (i = 0; i < 4; i++) {
msg.addr = VCM_ADDR;
msg.flags = I2C_M_RD;
@@ -690,6 +693,7 @@ static long ov5693_s_exposure(struct v4l2_subdev *sd,
/* we should not accept the invalid value below */
if (analog_gain == 0) {
struct i2c_client *client = v4l2_get_subdevdata(sd);
+
v4l2_err(client, "%s: invalid value\n", __func__);
return -EINVAL;
}
@@ -722,6 +726,7 @@ static int __ov5693_otp_read(struct v4l2_subdev *sd, u8 *buf)
int ret;
int i;
u8 *b = buf;
+
dev->otp_size = 0;
for (i = 1; i < OV5693_OTP_BANK_MAX; i++) {
/*set bank NO and OTP read mode. */
@@ -984,6 +989,7 @@ static int ov5693_t_focus_abs(struct v4l2_subdev *sd, s32 value)
static int ov5693_t_focus_rel(struct v4l2_subdev *sd, s32 value)
{
struct ov5693_device *dev = to_ov5693_sensor(sd);
+
return ov5693_t_focus_abs(sd, dev->focus + value);
}
@@ -1033,6 +1039,7 @@ static int ov5693_q_focus_abs(struct v4l2_subdev *sd, s32 *value)
static int ov5693_t_vcm_slew(struct v4l2_subdev *sd, s32 value)
{
struct ov5693_device *dev = to_ov5693_sensor(sd);
+
dev->number_of_steps = value;
dev->vcm_update = true;
return 0;
@@ -1041,6 +1048,7 @@ static int ov5693_t_vcm_slew(struct v4l2_subdev *sd, s32 value)
static int ov5693_t_vcm_timing(struct v4l2_subdev *sd, s32 value)
{
struct ov5693_device *dev = to_ov5693_sensor(sd);
+
dev->number_of_steps = value;
dev->vcm_update = true;
return 0;
@@ -1563,6 +1571,7 @@ static int ov5693_set_fmt(struct v4l2_subdev *sd,
struct camera_mipi_info *ov5693_info = NULL;
int ret = 0;
int idx;
+
if (format->pad)
return -EINVAL;
if (!fmt)
@@ -1599,6 +1608,7 @@ static int ov5693_set_fmt(struct v4l2_subdev *sd,
ret = startup(sd);
if (ret) {
int i = 0;
+
dev_err(&client->dev, "ov5693 startup err, retry to power up\n");
for (i = 0; i < OV5693_POWER_UP_RETRY_NUM; i++) {
dev_err(&client->dev,
@@ -1655,6 +1665,7 @@ static int ov5693_get_fmt(struct v4l2_subdev *sd,
{
struct v4l2_mbus_framefmt *fmt = &format->format;
struct ov5693_device *dev = to_ov5693_sensor(sd);
+
if (format->pad)
return -EINVAL;
@@ -1818,6 +1829,7 @@ static int ov5693_s_parm(struct v4l2_subdev *sd,
struct v4l2_streamparm *param)
{
struct ov5693_device *dev = to_ov5693_sensor(sd);
+
dev->run_mode = param->parm.capture.capturemode;
mutex_lock(&dev->input_lock);
@@ -1907,6 +1919,7 @@ static int ov5693_remove(struct i2c_client *client)
{
struct v4l2_subdev *sd = i2c_get_clientdata(client);
struct ov5693_device *dev = to_ov5693_sensor(sd);
+
dev_dbg(&client->dev, "ov5693_remove...\n");
dev->platform_data->csi_cfg(sd, 0);
Fix "Missing a blank line after declarations" warning reported by checkpatch. Signed-off-by: Riccardo Schirone <sirmy15@gmail.com> --- drivers/staging/media/atomisp/i2c/ov5693/atomisp-ov5693.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)