diff mbox

[5/5] arm: dts: sun8i: a83t: bananapi-m3: Enable IR controller

Message ID 20171217224547.21481-6-embed3d@gmail.com (mailing list archive)
State New, archived
Headers show

Commit Message

Philipp Rossak Dec. 17, 2017, 10:45 p.m. UTC
The Bananapi M3 has an onboard IR receiver.
This enables the onboard IR receiver subnode.
Other than the other IR receivers this one needs a base clock frequency
of 3000000 Hz (3 MHz), to be able to work.

Signed-off-by: Philipp Rossak <embed3d@gmail.com>
---
 arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts | 7 +++++++
 1 file changed, 7 insertions(+)

Comments

Chen-Yu Tsai Dec. 18, 2017, 3:30 a.m. UTC | #1
On Mon, Dec 18, 2017 at 6:45 AM, Philipp Rossak <embed3d@gmail.com> wrote:
> The Bananapi M3 has an onboard IR receiver.
> This enables the onboard IR receiver subnode.
> Other than the other IR receivers this one needs a base clock frequency

Unlike the other...

> of 3000000 Hz (3 MHz), to be able to work.
>
> Signed-off-by: Philipp Rossak <embed3d@gmail.com>
> ---
>  arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts | 7 +++++++
>  1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
> index 6550bf0e594b..2bf25ca64133 100644
> --- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
> +++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
> @@ -100,6 +100,13 @@
>         status = "okay";
>  };
>
> +&ir {

See my other reply about the name.

Otherwise,

Acked-by: Chen-Yu Tsai <wens@csie.org>

> +       pinctrl-names = "default";
> +       pinctrl-0 = <&ir_pins_a>;
> +       clock-frequency = <3000000>;
> +       status = "okay";
> +};
> +
>  &mdio {
>         rgmii_phy: ethernet-phy@1 {
>                 compatible = "ethernet-phy-ieee802.3-c22";
> --
> 2.11.0
>
diff mbox

Patch

diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
index 6550bf0e594b..2bf25ca64133 100644
--- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
@@ -100,6 +100,13 @@ 
 	status = "okay";
 };
 
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir_pins_a>;
+	clock-frequency = <3000000>;
+	status = "okay";
+};
+
 &mdio {
 	rgmii_phy: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";