| Message ID | 20180129155810.7867-6-embed3d@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Mon, Jan 29, 2018 at 04:58:09PM +0100, Philipp Rossak wrote: > The Bananapi M3 has an onboard IR receiver. > This enables the onboard IR receiver subnode. > Unlike the other IR receivers this one needs a base clock frequency > of 3000000 Hz (3 MHz), to be able to work. > > Signed-off-by: Philipp Rossak <embed3d@gmail.com> > Acked-by: Chen-Yu Tsai <wens@csie.org> > --- > arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts > index 6550bf0e594b..ffc6445fd281 100644 > --- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts > +++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts > @@ -82,6 +82,13 @@ > }; > }; > > +&cir { > + pinctrl-names = "default"; > + pinctrl-0 = <&cir_pins>; If this is the only muxing option (like your node name suggests), you can put it directly in the DTSI to remove boilerplate from all the DTS. Maxime
diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts index 6550bf0e594b..ffc6445fd281 100644 --- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts +++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts @@ -82,6 +82,13 @@ }; }; +&cir { + pinctrl-names = "default"; + pinctrl-0 = <&cir_pins>; + clock-frequency = <3000000>; + status = "okay"; +}; + &ehci0 { /* Terminus Tech FE 1.1s 4-port USB 2.0 hub here */ status = "okay";