diff mbox

w1: fix w1_ds2438 documentation

Message ID 20180302075524.27868-1-manio@skyboo.net (mailing list archive)
State New, archived
Headers show

Commit Message

Mariusz Bialonczyk March 2, 2018, 7:55 a.m. UTC
Signed-off-by: Mariusz Bialonczyk <manio@skyboo.net>
---
 Documentation/w1/slaves/w1_ds2438 | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Mauro Carvalho Chehab March 6, 2018, 5:29 p.m. UTC | #1
Em Fri,  2 Mar 2018 08:55:24 +0100
Mariusz Bialonczyk <manio@skyboo.net> escreveu:

> Signed-off-by: Mariusz Bialonczyk <manio@skyboo.net>
> ---
>  Documentation/w1/slaves/w1_ds2438 | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/Documentation/w1/slaves/w1_ds2438 b/Documentation/w1/slaves/w1_ds2438
> index b99f3674c5b4..e64f65a09387 100644
> --- a/Documentation/w1/slaves/w1_ds2438
> +++ b/Documentation/w1/slaves/w1_ds2438
> @@ -60,4 +60,4 @@ vad: general purpose A/D input (VAD)
>  vdd: battery input (VDD)
>  
>  After the voltage conversion the value is returned as decimal ASCII.
> -Note: The value is in mV, so to get a volts the value has to be divided by 10.
> +Note: To get a volts the value has to be divided by 100.

Hmm... I've no idea why you sent this to linux-media and to me...

The proper maintainer seems to be Evgeniy:

 ./scripts/get_maintainer.pl -f Documentation/w1/slaves/w1_ds2438
Evgeniy Polyakov <zbr@ioremap.net> (maintainer:W1 DALLAS'S 1-WIRE BUS)
Jonathan Corbet <corbet@lwn.net> (maintainer:DOCUMENTATION)
Greg Kroah-Hartman <gregkh@linuxfoundation.org> (commit_signer:1/1=100%)
Mariusz Bialonczyk <manio@skyboo.net> (commit_signer:1/1=100%,authored:1/1=100%,added_lines:63/63=100%)
linux-doc@vger.kernel.org (open list:DOCUMENTATION)
linux-kernel@vger.kernel.org (open list)



Thanks,
Mauro
diff mbox

Patch

diff --git a/Documentation/w1/slaves/w1_ds2438 b/Documentation/w1/slaves/w1_ds2438
index b99f3674c5b4..e64f65a09387 100644
--- a/Documentation/w1/slaves/w1_ds2438
+++ b/Documentation/w1/slaves/w1_ds2438
@@ -60,4 +60,4 @@  vad: general purpose A/D input (VAD)
 vdd: battery input (VDD)
 
 After the voltage conversion the value is returned as decimal ASCII.
-Note: The value is in mV, so to get a volts the value has to be divided by 10.
+Note: To get a volts the value has to be divided by 100.