[v14,1/2] rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver documentation

Commit Message

Niklas Söderlund April 26, 2018, 8:21 p.m. UTC

Documentation for Renesas R-Car MIPI CSI-2 receiver. The CSI-2 receivers
are located between the video sources (CSI-2 transmitters) and the video
grabbers (VIN) on Gen3 of Renesas R-Car SoC.

Each CSI-2 device is connected to more than one VIN device which
simultaneously can receive video from the same CSI-2 device. Each VIN
device can also be connected to more than one CSI-2 device. The routing
of which links are used is controlled by the VIN devices. There are only
a few possible routes which are set by hardware limitations, which are
different for each SoC in the Gen3 family.

Signed-off-by: Niklas Söderlund <[e-mail]>
Acked-by: Rob Herring <[e-mail]>
Acked-by: Sakari Ailus <[e-mail]>
Reviewed-by: Laurent Pinchart <[e-mail]>

---

* Changes since v13
- Add Laurent's tag.
---
 .../bindings/media/renesas,rcar-csi2.txt      | 99 +++++++++++++++++++
 MAINTAINERS                                   |  1 +
 2 files changed, 100 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/renesas,rcar-csi2.txt

Patch

diff --git a/Documentation/devicetree/bindings/media/renesas,rcar-csi2.txt b/Documentation/devicetree/bindings/media/renesas,rcar-csi2.txt
new file mode 100644
index 0000000000000000..6f71f997dc48eee9
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,rcar-csi2.txt
@@ -0,0 +1,99 @@ 
+Renesas R-Car MIPI CSI-2
+------------------------
+
+The R-Car CSI-2 receiver device provides MIPI CSI-2 capabilities for the
+Renesas R-Car family of devices. It is used in conjunction with the
+R-Car VIN module, which provides the video capture capabilities.
+
+Mandatory properties
+--------------------
+ - compatible: Must be one or more of the following
+   - "renesas,r8a7795-csi2" for the R8A7795 device.
+   - "renesas,r8a7796-csi2" for the R8A7796 device.
+
+ - reg: the register base and size for the device registers
+ - interrupts: the interrupt for the device
+ - clocks: reference to the parent clock
+
+The device node shall contain two 'port' child nodes according to the
+bindings defined in Documentation/devicetree/bindings/media/
+video-interfaces.txt. Port 0 shall connect to the CSI-2 source. Port 1
+shall connect to all the R-Car VIN modules that have a hardware
+connection to the CSI-2 receiver.
+
+- Port 0 - Video source (mandatory)
+	- Endpoint 0 - sub-node describing the endpoint that is the video source
+
+- Port 1 - VIN instances (optional)
+	- One endpoint sub-node for every R-Car VIN instance which is connected
+	  to the R-Car CSI-2 receiver.
+
+Example:
+
+	csi20: csi2@fea80000 {
+		compatible = "renesas,r8a7796-csi2";
+		reg = <0 0xfea80000 0 0x10000>;
+		interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cpg CPG_MOD 714>;
+		power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+		resets = <&cpg 714>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reg = <0>;
+
+				csi20_in: endpoint@0 {
+					reg = <0>;
+					clock-lanes = <0>;
+					data-lanes = <1>;
+					remote-endpoint = <&adv7482_txb>;
+				};
+			};
+
+			port@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reg = <1>;
+
+				csi20vin0: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vin0csi20>;
+				};
+				csi20vin1: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vin1csi20>;
+				};
+				csi20vin2: endpoint@2 {
+					reg = <2>;
+					remote-endpoint = <&vin2csi20>;
+				};
+				csi20vin3: endpoint@3 {
+					reg = <3>;
+					remote-endpoint = <&vin3csi20>;
+				};
+				csi20vin4: endpoint@4 {
+					reg = <4>;
+					remote-endpoint = <&vin4csi20>;
+				};
+				csi20vin5: endpoint@5 {
+					reg = <5>;
+					remote-endpoint = <&vin5csi20>;
+				};
+				csi20vin6: endpoint@6 {
+					reg = <6>;
+					remote-endpoint = <&vin6csi20>;
+				};
+				csi20vin7: endpoint@7 {
+					reg = <7>;
+					remote-endpoint = <&vin7csi20>;
+				};
+			};
+		};
+	};
diff --git a/MAINTAINERS b/MAINTAINERS
index 0a1410d5a621835d..45371a323e790c97 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8814,6 +8814,7 @@  L:	[e-mail]
 L:	[e-mail]
 T:	git git://linuxtv.org/media_tree.git
 S:	Supported
+F:	Documentation/devicetree/bindings/media/renesas,rcar-csi2.txt
 F:	Documentation/devicetree/bindings/media/rcar_vin.txt
 F:	drivers/media/platform/rcar-vin/