media: pci: cx25821: Replace mdelay() with msleep()

Commit Message

Jia-Ju Bai July 27, 2018, 3:22 a.m. UTC

cx25821_gpio_init(), cx25821_initialize() and cx25821_registers_init() 
are never called in atomic context.
They call mdelay() to busily wait, which is not necessary.
mdelay() can be replaced with msleep().

This is found by a static analysis tool named DCNS written by myself.

Signed-off-by: Jia-Ju Bai <[e-mail]>
---
 drivers/media/pci/cx25821/cx25821-core.c | 4 ++--
 drivers/media/pci/cx25821/cx25821-gpio.c | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

Patch

diff --git a/drivers/media/pci/cx25821/cx25821-core.c b/drivers/media/pci/cx25821/cx25821-core.c
index 040c6c251d3a..2f0171134f7e 100644
--- a/drivers/media/pci/cx25821/cx25821-core.c
+++ b/drivers/media/pci/cx25821/cx25821-core.c
@@ -428,7 +428,7 @@  static void cx25821_registers_init(struct cx25821_dev *dev)
 	tmp |= FLD_USE_ALT_PLL_REF;
 	cx_write(CLK_RST, tmp & ~(FLD_VID_I_CLK_NOE | FLD_VID_J_CLK_NOE));
 
-	mdelay(100);
+	msleep(100);
 }
 
 int cx25821_sram_channel_setup(struct cx25821_dev *dev,
@@ -803,7 +803,7 @@  static void cx25821_initialize(struct cx25821_dev *dev)
 	cx_write(CLK_DELAY, cx_read(CLK_DELAY) & 0x80000000);
 	cx_write(PAD_CTRL, 0x12);	/* for I2C */
 	cx25821_registers_init(dev);	/* init Pecos registers */
-	mdelay(100);
+	msleep(100);
 
 	for (i = 0; i < VID_CHANNEL_NUM; i++) {
 		cx25821_set_vip_mode(dev, dev->channels[i].sram_channels);
diff --git a/drivers/media/pci/cx25821/cx25821-gpio.c b/drivers/media/pci/cx25821/cx25821-gpio.c
index 76b8f619e55a..f5ffaf880e5f 100644
--- a/drivers/media/pci/cx25821/cx25821-gpio.c
+++ b/drivers/media/pci/cx25821/cx25821-gpio.c
@@ -88,7 +88,7 @@  void cx25821_gpio_init(struct cx25821_dev *dev)
 	default:
 		/* set GPIO 5 to select the path for Medusa/Athena */
 		cx25821_set_gpiopin_logicvalue(dev, 5, 1);
-		mdelay(20);
+		msleep(20);
 		break;
 	}