@@ -19,6 +19,7 @@
#include <media/v4l2-ctrls.h>
#include <media/v4l2-fwnode.h>
#include <media/v4l2-mc.h>
+#include <media/v4l2-rect.h>
#include "tvp5150_reg.h"
@@ -1007,20 +1008,40 @@ static void tvp5150_set_default(v4l2_std_id std, struct v4l2_rect *crop)
crop->height = TVP5150_V_MAX_OTHERS;
}
+static struct v4l2_rect *
+__tvp5150_get_pad_crop(struct tvp5150 *decoder,
+ struct v4l2_subdev_pad_config *cfg, unsigned int pad,
+ enum v4l2_subdev_format_whence which)
+{
+ switch (which) {
+ case V4L2_SUBDEV_FORMAT_TRY:
+ return v4l2_subdev_get_try_crop(&decoder->sd, cfg, pad);
+ case V4L2_SUBDEV_FORMAT_ACTIVE:
+ return &decoder->rect;
+ default:
+ return NULL;
+ }
+}
+
static int tvp5150_fill_fmt(struct v4l2_subdev *sd,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_format *format)
{
struct v4l2_mbus_framefmt *f;
+ struct v4l2_rect *__crop;
struct tvp5150 *decoder = to_tvp5150(sd);
if (!format || (format->pad != TVP5150_PAD_VID_OUT))
return -EINVAL;
f = &format->format;
+ __crop = __tvp5150_get_pad_crop(decoder, cfg, format->pad,
+ format->which);
+ if (!__crop)
+ return -EINVAL;
- f->width = decoder->rect.width;
- f->height = decoder->rect.height / 2;
+ f->width = __crop->width;
+ f->height = __crop->height / 2;
f->code = TVP5150_MBUS_FMT;
f->field = TVP5150_FIELD;
@@ -1031,17 +1052,51 @@ static int tvp5150_fill_fmt(struct v4l2_subdev *sd,
return 0;
}
+unsigned int tvp5150_get_hmax(struct v4l2_subdev *sd)
+{
+ struct tvp5150 *decoder = to_tvp5150(sd);
+ v4l2_std_id std;
+
+ /* Calculate height based on current standard */
+ if (decoder->norm == V4L2_STD_ALL)
+ std = tvp5150_read_std(sd);
+ else
+ std = decoder->norm;
+
+ return (std & V4L2_STD_525_60) ?
+ TVP5150_V_MAX_525_60 : TVP5150_V_MAX_OTHERS;
+}
+
+static inline void
+__tvp5150_set_selection(struct v4l2_subdev *sd, struct v4l2_rect rect)
+{
+ struct tvp5150 *decoder = to_tvp5150(sd);
+ unsigned int hmax = tvp5150_get_hmax(sd);
+
+ regmap_write(decoder->regmap, TVP5150_VERT_BLANKING_START, rect.top);
+ regmap_write(decoder->regmap, TVP5150_VERT_BLANKING_STOP,
+ rect.top + rect.height - hmax);
+ regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_ST_MSB,
+ rect.left >> TVP5150_CROP_SHIFT);
+ regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_ST_LSB,
+ rect.left | (1 << TVP5150_CROP_SHIFT));
+ regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_STP_MSB,
+ (rect.left + rect.width - TVP5150_MAX_CROP_LEFT) >>
+ TVP5150_CROP_SHIFT);
+ regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_STP_LSB,
+ rect.left + rect.width - TVP5150_MAX_CROP_LEFT);
+}
+
static int tvp5150_set_selection(struct v4l2_subdev *sd,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_selection *sel)
{
struct tvp5150 *decoder = to_tvp5150(sd);
struct v4l2_rect rect = sel->r;
- v4l2_std_id std;
- int hmax;
+ struct v4l2_rect *__crop;
+ unsigned int hmax;
- if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE ||
- sel->target != V4L2_SEL_TGT_CROP)
+ if (sel->target != V4L2_SEL_TGT_CROP)
return -EINVAL;
dev_dbg_lvl(sd->dev, 1, debug, "%s left=%d, top=%d, width=%d, height=%d\n",
@@ -1050,17 +1105,7 @@ static int tvp5150_set_selection(struct v4l2_subdev *sd,
/* tvp5150 has some special limits */
rect.left = clamp(rect.left, 0, TVP5150_MAX_CROP_LEFT);
rect.top = clamp(rect.top, 0, TVP5150_MAX_CROP_TOP);
-
- /* Calculate height based on current standard */
- if (decoder->norm == V4L2_STD_ALL)
- std = tvp5150_read_std(sd);
- else
- std = decoder->norm;
-
- if (std & V4L2_STD_525_60)
- hmax = TVP5150_V_MAX_525_60;
- else
- hmax = TVP5150_V_MAX_OTHERS;
+ hmax = tvp5150_get_hmax(sd);
/*
* alignments:
@@ -1073,20 +1118,18 @@ static int tvp5150_set_selection(struct v4l2_subdev *sd,
hmax - TVP5150_MAX_CROP_TOP - rect.top,
hmax - rect.top, 0, 0);
- regmap_write(decoder->regmap, TVP5150_VERT_BLANKING_START, rect.top);
- regmap_write(decoder->regmap, TVP5150_VERT_BLANKING_STOP,
- rect.top + rect.height - hmax);
- regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_ST_MSB,
- rect.left >> TVP5150_CROP_SHIFT);
- regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_ST_LSB,
- rect.left | (1 << TVP5150_CROP_SHIFT));
- regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_STP_MSB,
- (rect.left + rect.width - TVP5150_MAX_CROP_LEFT) >>
- TVP5150_CROP_SHIFT);
- regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_STP_LSB,
- rect.left + rect.width - TVP5150_MAX_CROP_LEFT);
+ __crop = __tvp5150_get_pad_crop(decoder, cfg, sel->pad,
+ sel->which);
+
+ /*
+ * Update output image size if the selection (crop) rectangle size or
+ * position has been modified.
+ */
+ if (!v4l2_rect_equal(&rect, __crop))
+ if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE)
+ __tvp5150_set_selection(sd, rect);
- decoder->rect = rect;
+ *__crop = rect;
return 0;
}
@@ -1098,9 +1141,6 @@ static int tvp5150_get_selection(struct v4l2_subdev *sd,
struct tvp5150 *decoder = container_of(sd, struct tvp5150, sd);
v4l2_std_id std;
- if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
- return -EINVAL;
-
switch (sel->target) {
case V4L2_SEL_TGT_CROP_BOUNDS:
case V4L2_SEL_TGT_CROP_DEFAULT:
@@ -1119,7 +1159,8 @@ static int tvp5150_get_selection(struct v4l2_subdev *sd,
sel->r.height = TVP5150_V_MAX_OTHERS;
return 0;
case V4L2_SEL_TGT_CROP:
- sel->r = decoder->rect;
+ sel->r = *__tvp5150_get_pad_crop(decoder, cfg, sel->pad,
+ sel->which);
return 0;
default:
return -EINVAL;
Since commit 10d5509c8d50 ("[media] v4l2: remove g/s_crop from video ops") the 'which' field for set/get_selection must be FORMAT_ACTIVE. There is no way to try different selections. The patch adds a helper function to select the correct selection memory space (sub-device file handle or driver state) which will be set/returned. The TVP5150 AVID will be updated if the 'which' field is FORMAT_ACTIVE and the requested selection rectangle differs from the already set one. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> --- drivers/media/i2c/tvp5150.c | 109 +++++++++++++++++++++++++----------- 1 file changed, 75 insertions(+), 34 deletions(-)