diff mbox series

[v6,2/6,media] ad5820: DT new optional field enable-gpios

Message ID 20181002111356.32298-1-ricardo.ribalda@gmail.com (mailing list archive)
State New, archived
Headers show
Series None | expand

Commit Message

Ricardo Ribalda Delgado Oct. 2, 2018, 11:13 a.m. UTC 
Document new enable-gpio field. It can be used to disable the part
without turning down its regulator.

Cc: devicetree@vger.kernel.org
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
---
 Documentation/devicetree/bindings/media/i2c/ad5820.txt | 6 ++++++
 1 file changed, 6 insertions(+)

Comments

Laurent Pinchart Oct. 2, 2018, 11:29 a.m. UTC | #1 
Hi Ricardo,

Thank you for the patch.

On Tuesday, 2 October 2018 14:13:56 EEST Ricardo Ribalda Delgado wrote:
> Document new enable-gpio field. It can be used to disable the part
> without turning down its regulator.
> 
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
> Acked-by: Pavel Machek <pavel@ucw.cz>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
>  Documentation/devicetree/bindings/media/i2c/ad5820.txt | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/ad5820.txt
> b/Documentation/devicetree/bindings/media/i2c/ad5820.txt index
> 5940ca11c021..db596e8eb0ba 100644
> --- a/Documentation/devicetree/bindings/media/i2c/ad5820.txt
> +++ b/Documentation/devicetree/bindings/media/i2c/ad5820.txt
> @@ -8,6 +8,11 @@ Required Properties:
> 
>    - VANA-supply: supply of voltage for VANA pin
> 
> +Optional properties:
> +
> +   - enable-gpios : GPIO spec for the XSHUTDOWN pin. The XSHUTDOWN signal
> is +active low, a high level on the pin enables the device.
> +
>  Example:
> 
>         ad5820: coil@c {
> @@ -15,5 +20,6 @@ Example:
>                 reg = <0x0c>;
> 
>                 VANA-supply = <&vaux4>;
> +               enable-gpios = <&msmgpio 26 GPIO_ACTIVE_HIGH>;
>         };
Rob Herring (Arm) Oct. 5, 2018, 8:36 p.m. UTC | #2 
On Tue,  2 Oct 2018 13:13:56 +0200, Ricardo Ribalda Delgado wrote:
> Document new enable-gpio field. It can be used to disable the part
> without turning down its regulator.
> 
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
> Acked-by: Pavel Machek <pavel@ucw.cz>
> ---
>  Documentation/devicetree/bindings/media/i2c/ad5820.txt | 6 ++++++
>  1 file changed, 6 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/media/i2c/ad5820.txt b/Documentation/devicetree/bindings/media/i2c/ad5820.txt
index 5940ca11c021..db596e8eb0ba 100644
--- a/Documentation/devicetree/bindings/media/i2c/ad5820.txt
+++ b/Documentation/devicetree/bindings/media/i2c/ad5820.txt
@@ -8,6 +8,11 @@  Required Properties:
 
   - VANA-supply: supply of voltage for VANA pin
 
+Optional properties:
+
+   - enable-gpios : GPIO spec for the XSHUTDOWN pin. The XSHUTDOWN signal is
+active low, a high level on the pin enables the device.
+
 Example:
 
        ad5820: coil@c {
@@ -15,5 +20,6 @@  Example:
                reg = <0x0c>;
 
                VANA-supply = <&vaux4>;
+               enable-gpios = <&msmgpio 26 GPIO_ACTIVE_HIGH>;
        };