@@ -8,7 +8,7 @@ Application Priority
When multiple applications share a device it may be desirable to assign
them different priorities. Contrary to the traditional "rm -rf /" school
-of thought a video recording application could for example block other
+of thought, a video recording application could for example block other
applications from changing video controls or switching the current TV
channel. Another objective is to permit low priority applications
working in background, which can be preempted by user controlled
@@ -31,7 +31,7 @@ outputs applications can enumerate them with the
:ref:`VIDIOC_ENUMAUDOUT <VIDIOC_ENUMAUDOUT>` ioctl, respectively.
The struct :c:type:`v4l2_audio` returned by the
:ref:`VIDIOC_ENUMAUDIO` ioctl also contains signal
-:status information applicable when the current audio input is queried.
+status information applicable when the current audio input is queried.
The :ref:`VIDIOC_G_AUDIO <VIDIOC_G_AUDIO>` and
:ref:`VIDIOC_G_AUDOUT <VIDIOC_G_AUDOUT>` ioctls report the current
@@ -99,6 +99,6 @@ requests and always returns default parameters as :ref:`VIDIOC_G_FMT <VIDIOC_G_F
Reading Images
==============
-A video capture device may support the ::ref:`read() function <func-read>`
+A video capture device may support the :ref:`read() function <func-read>`
and/or streaming (:ref:`memory mapping <func-mmap>` or
:ref:`user pointer <userp>`) I/O. See :ref:`io` for details.
@@ -10,7 +10,7 @@ This interface was aimed at devices receiving and demodulating Teletext
data [:ref:`ets300706`, :ref:`itu653`], evaluating the Teletext
packages and storing formatted pages in cache memory. Such devices are
usually implemented as microcontrollers with serial interface
-(I:sup:`2`\ C) and could be found on old TV cards, dedicated Teletext
+(I\ :sup:`2`\ C) and could be found on old TV cards, dedicated Teletext
decoding cards and home-brew devices connected to the PC parallel port.
The Teletext API was designed by Martin Buck. It was defined in the
@@ -12,7 +12,7 @@ Data Format Negotiation
Different devices exchange different kinds of data with applications,
for example video images, raw or sliced VBI data, RDS datagrams. Even
-within one kind many different formats are possible, in particular an
+within one kind many different formats are possible, in particular there is an
abundance of image formats. Although drivers must provide a default and
the selection persists across closing and reopening a device,
applications should always negotiate a data format before engaging in
@@ -231,17 +231,17 @@ up the output is started with :ref:`VIDIOC_STREAMON <VIDIOC_STREAMON>`.
In the write loop, when the application runs out of free buffers, it
must wait until an empty buffer can be dequeued and reused.
-To enqueue and dequeue a buffer applications use the :ref:`VIDIOC_QBUF`
-and :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctl. The status of a buffer
-being mapped, enqueued, full or empty can be determined at any time
-using the :ref:`VIDIOC_QUERYBUF` ioctl. Two methods exist to suspend
-execution of the application until one or more buffers can be dequeued.
-By default :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` blocks when no buffer is
-in the outgoing queue. When the ``O_NONBLOCK`` flag was given to the
-:ref:`open() <func-open>` function, :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>`
-returns immediately with an ``EAGAIN`` error code when no buffer is
-available. The :ref:`select() <func-select>` or :ref:`poll()
-<func-poll>` functions are always available.
+To enqueue and dequeue a buffer applications use the
+:ref:`VIVIOC_QBUF <VIDIOC_QBUF>` and :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>`
+ioctl. The status of a buffer being mapped, enqueued, full or empty can
+be determined at any time using the :ref:`VIDIOC_QUERYBUF` ioctl. Two
+methods exist to suspend execution of the application until one or more
+buffers can be dequeued. By default :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>`
+blocks when no buffer is in the outgoing queue. When the ``O_NONBLOCK``
+flag was given to the :ref:`open() <func-open>` function,
+:ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` returns immediately with an ``EAGAIN``
+error code when no buffer is available. The :ref:`select() <func-select>`
+or :ref:`poll() <func-poll>` functions are always available.
To start and stop capturing or output applications call the
:ref:`VIDIOC_STREAMON <VIDIOC_STREAMON>` and :ref:`VIDIOC_STREAMOFF
@@ -53,7 +53,7 @@ ranges. These ranges are listed in :ref:`devices`.
The creation of character special files (with mknod) is a privileged
operation and devices cannot be opened by major and minor number. That
-means applications cannot *reliable* scan for loaded or installed
+means applications cannot *reliably* scan for loaded or installed
drivers. The user must enter a device name, or the application can try
the conventional device names.
@@ -31,7 +31,7 @@ current video or radio input is queried.
.. note::
:ref:`VIDIOC_S_TUNER <VIDIOC_G_TUNER>` does not switch the
- current tuner, when there is more than one at all. The tuner is solely
+ current tuner, when there is more than one. The tuner is solely
determined by the current video input. Drivers must support both ioctls
and set the ``V4L2_CAP_TUNER`` flag in the struct :c:type:`v4l2_capability`
returned by the :ref:`VIDIOC_QUERYCAP` ioctl when the
@@ -41,7 +41,7 @@ current video or radio input is queried.
Modulators
==========
-Video output devices can have one or more modulators, uh, modulating a
+Video output devices can have one or more modulators, that modulate a
video signal for radiation or connection to the antenna input of a TV
set or video recorder. Each modulator is associated with one or more
video outputs, depending on the number of RF connectors on the
@@ -62,9 +62,9 @@ memory pages at any time between the completion of the DMA and this
ioctl. The memory is also unlocked when
:ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` is called,
:ref:`VIDIOC_REQBUFS`, or when the device is closed.
-Applications must take care not to free buffers without dequeuing. For
-once, the buffers remain locked until further, wasting physical memory.
-Second the driver will not be notified when the memory is returned to
+Applications must take care not to free buffers without dequeuing.
+Firstly, the buffers remain locked for longer, wasting physical memory.
+Secondly the driver will not be notified when the memory is returned to
the application's free list and subsequently reused for other purposes,
possibly completing the requested DMA and overwriting valuable data.
@@ -90,7 +90,7 @@ To start and stop capturing or output applications call the
.. note::
- ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` removes all buffers from
+ :ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` removes all buffers from
both queues and unlocks all buffers as a side effect. Since there is no
notion of doing anything "now" on a multitasking system, if an
application needs to synchronize with another event it should examine
@@ -7,7 +7,7 @@ Video Inputs and Outputs
************************
Video inputs and outputs are physical connectors of a device. These can
-be for example RF connectors (antenna/cable), CVBS a.k.a. Composite
+be for example: RF connectors (antenna/cable), CVBS a.k.a. Composite
Video, S-Video and RGB connectors. Camera sensors are also considered to
be a video input. Video and VBI capture devices have inputs. Video and
VBI output devices have outputs, at least one each. Radio devices have
@@ -19,7 +19,7 @@ outputs applications can enumerate them with the
:ref:`VIDIOC_ENUMOUTPUT` ioctl, respectively. The
struct :c:type:`v4l2_input` returned by the
:ref:`VIDIOC_ENUMINPUT` ioctl also contains signal
-:status information applicable when the current video input is queried.
+status information applicable when the current video input is queried.
The :ref:`VIDIOC_G_INPUT <VIDIOC_G_INPUT>` and
:ref:`VIDIOC_G_OUTPUT <VIDIOC_G_OUTPUT>` ioctls return the index of
Signed-off-by: Sean Young <sean@mess.org> --- Documentation/media/uapi/v4l/app-pri.rst | 2 +- Documentation/media/uapi/v4l/audio.rst | 2 +- Documentation/media/uapi/v4l/dev-capture.rst | 2 +- Documentation/media/uapi/v4l/dev-teletext.rst | 2 +- Documentation/media/uapi/v4l/format.rst | 2 +- Documentation/media/uapi/v4l/mmap.rst | 22 +++++++++---------- Documentation/media/uapi/v4l/open.rst | 2 +- Documentation/media/uapi/v4l/tuner.rst | 4 ++-- Documentation/media/uapi/v4l/userp.rst | 8 +++---- Documentation/media/uapi/v4l/video.rst | 4 ++-- 10 files changed, 25 insertions(+), 25 deletions(-)