@@ -368,17 +368,6 @@ config BT_ATH3K
Say Y here to compile support for "Atheros firmware download driver"
into the kernel or say M to compile it as module (ath3k).
-config BT_WILINK
- tristate "Texas Instruments WiLink7 driver"
- depends on TI_ST
- help
- This enables the Bluetooth driver for Texas Instrument's BT/FM/GPS
- combo devices. This makes use of shared transport line discipline
- core driver to communicate with the BT core of the combo chip.
-
- Say Y here to compile support for Texas Instrument's WiLink7 driver
- into the kernel or say M to compile it as module (btwilink).
-
config BT_MTKUART
tristate "MediaTek HCI UART driver"
depends on SERIAL_DEV_BUS
@@ -19,7 +19,6 @@ obj-$(CONFIG_BT_INTEL) += btintel.o
obj-$(CONFIG_BT_ATH3K) += ath3k.o
obj-$(CONFIG_BT_MRVL) += btmrvl.o
obj-$(CONFIG_BT_MRVL_SDIO) += btmrvl_sdio.o
-obj-$(CONFIG_BT_WILINK) += btwilink.o
obj-$(CONFIG_BT_MTKUART) += btmtkuart.o
obj-$(CONFIG_BT_QCOMSMD) += btqcomsmd.o
obj-$(CONFIG_BT_BCM) += btbcm.o
deleted file mode 100644
@@ -1,350 +0,0 @@
-/*
- * Texas Instrument's Bluetooth Driver For Shared Transport.
- *
- * Bluetooth Driver acts as interface between HCI core and
- * TI Shared Transport Layer.
- *
- * Copyright (C) 2009-2010 Texas Instruments
- * Author: Raja Mani <raja_mani@ti.com>
- * Pavan Savoy <pavan_savoy@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#include <linux/platform_device.h>
-#include <net/bluetooth/bluetooth.h>
-#include <net/bluetooth/hci_core.h>
-#include <net/bluetooth/hci.h>
-
-#include <linux/ti_wilink_st.h>
-#include <linux/module.h>
-
-/* Bluetooth Driver Version */
-#define VERSION "1.0"
-#define MAX_BT_CHNL_IDS 3
-
-/* Number of seconds to wait for registration completion
- * when ST returns PENDING status.
- */
-#define BT_REGISTER_TIMEOUT 6000 /* 6 sec */
-
-/**
- * struct ti_st - driver operation structure
- * @hdev: hci device pointer which binds to bt driver
- * @reg_status: ST registration callback status
- * @st_write: write function provided by the ST driver
- * to be used by the driver during send_frame.
- * @wait_reg_completion - completion sync between ti_st_open
- * and st_reg_completion_cb.
- */
-struct ti_st {
- struct hci_dev *hdev;
- int reg_status;
- long (*st_write) (struct sk_buff *);
- struct completion wait_reg_completion;
-};
-
-/* Increments HCI counters based on pocket ID (cmd,acl,sco) */
-static inline void ti_st_tx_complete(struct ti_st *hst, int pkt_type)
-{
- struct hci_dev *hdev = hst->hdev;
-
- /* Update HCI stat counters */
- switch (pkt_type) {
- case HCI_COMMAND_PKT:
- hdev->stat.cmd_tx++;
- break;
-
- case HCI_ACLDATA_PKT:
- hdev->stat.acl_tx++;
- break;
-
- case HCI_SCODATA_PKT:
- hdev->stat.sco_tx++;
- break;
- }
-}
-
-/* ------- Interfaces to Shared Transport ------ */
-
-/* Called by ST layer to indicate protocol registration completion
- * status.ti_st_open() function will wait for signal from this
- * API when st_register() function returns ST_PENDING.
- */
-static void st_reg_completion_cb(void *priv_data, int data)
-{
- struct ti_st *lhst = priv_data;
-
- /* Save registration status for use in ti_st_open() */
- lhst->reg_status = data;
- /* complete the wait in ti_st_open() */
- complete(&lhst->wait_reg_completion);
-}
-
-/* Called by Shared Transport layer when receive data is available */
-static long st_receive(void *priv_data, struct sk_buff *skb)
-{
- struct ti_st *lhst = priv_data;
- int err;
-
- if (!skb)
- return -EFAULT;
-
- if (!lhst) {
- kfree_skb(skb);
- return -EFAULT;
- }
-
- /* Forward skb to HCI core layer */
- err = hci_recv_frame(lhst->hdev, skb);
- if (err < 0) {
- BT_ERR("Unable to push skb to HCI core(%d)", err);
- return err;
- }
-
- lhst->hdev->stat.byte_rx += skb->len;
-
- return 0;
-}
-
-/* ------- Interfaces to HCI layer ------ */
-/* protocol structure registered with shared transport */
-static struct st_proto_s ti_st_proto[MAX_BT_CHNL_IDS] = {
- {
- .chnl_id = HCI_EVENT_PKT, /* HCI Events */
- .hdr_len = sizeof(struct hci_event_hdr),
- .offset_len_in_hdr = offsetof(struct hci_event_hdr, plen),
- .len_size = 1, /* sizeof(plen) in struct hci_event_hdr */
- .reserve = 8,
- },
- {
- .chnl_id = HCI_ACLDATA_PKT, /* ACL */
- .hdr_len = sizeof(struct hci_acl_hdr),
- .offset_len_in_hdr = offsetof(struct hci_acl_hdr, dlen),
- .len_size = 2, /* sizeof(dlen) in struct hci_acl_hdr */
- .reserve = 8,
- },
- {
- .chnl_id = HCI_SCODATA_PKT, /* SCO */
- .hdr_len = sizeof(struct hci_sco_hdr),
- .offset_len_in_hdr = offsetof(struct hci_sco_hdr, dlen),
- .len_size = 1, /* sizeof(dlen) in struct hci_sco_hdr */
- .reserve = 8,
- },
-};
-
-/* Called from HCI core to initialize the device */
-static int ti_st_open(struct hci_dev *hdev)
-{
- unsigned long timeleft;
- struct ti_st *hst;
- int err, i;
-
- BT_DBG("%s %p", hdev->name, hdev);
-
- /* provide contexts for callbacks from ST */
- hst = hci_get_drvdata(hdev);
-
- for (i = 0; i < MAX_BT_CHNL_IDS; i++) {
- ti_st_proto[i].priv_data = hst;
- ti_st_proto[i].max_frame_size = HCI_MAX_FRAME_SIZE;
- ti_st_proto[i].recv = st_receive;
- ti_st_proto[i].reg_complete_cb = st_reg_completion_cb;
-
- /* Prepare wait-for-completion handler */
- init_completion(&hst->wait_reg_completion);
- /* Reset ST registration callback status flag,
- * this value will be updated in
- * st_reg_completion_cb()
- * function whenever it called from ST driver.
- */
- hst->reg_status = -EINPROGRESS;
-
- err = st_register(&ti_st_proto[i]);
- if (!err)
- goto done;
-
- if (err != -EINPROGRESS) {
- BT_ERR("st_register failed %d", err);
- return err;
- }
-
- /* ST is busy with either protocol
- * registration or firmware download.
- */
- BT_DBG("waiting for registration "
- "completion signal from ST");
- timeleft = wait_for_completion_timeout
- (&hst->wait_reg_completion,
- msecs_to_jiffies(BT_REGISTER_TIMEOUT));
- if (!timeleft) {
- BT_ERR("Timeout(%d sec),didn't get reg "
- "completion signal from ST",
- BT_REGISTER_TIMEOUT / 1000);
- return -ETIMEDOUT;
- }
-
- /* Is ST registration callback
- * called with ERROR status?
- */
- if (hst->reg_status != 0) {
- BT_ERR("ST registration completed with invalid "
- "status %d", hst->reg_status);
- return -EAGAIN;
- }
-
-done:
- hst->st_write = ti_st_proto[i].write;
- if (!hst->st_write) {
- BT_ERR("undefined ST write function");
- for (i = 0; i < MAX_BT_CHNL_IDS; i++) {
- /* Undo registration with ST */
- err = st_unregister(&ti_st_proto[i]);
- if (err)
- BT_ERR("st_unregister() failed with "
- "error %d", err);
- hst->st_write = NULL;
- }
- return -EIO;
- }
- }
- return 0;
-}
-
-/* Close device */
-static int ti_st_close(struct hci_dev *hdev)
-{
- int err, i;
- struct ti_st *hst = hci_get_drvdata(hdev);
-
- for (i = MAX_BT_CHNL_IDS-1; i >= 0; i--) {
- err = st_unregister(&ti_st_proto[i]);
- if (err)
- BT_ERR("st_unregister(%d) failed with error %d",
- ti_st_proto[i].chnl_id, err);
- }
-
- hst->st_write = NULL;
-
- return err;
-}
-
-static int ti_st_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
-{
- struct ti_st *hst;
- long len;
- int pkt_type;
-
- hst = hci_get_drvdata(hdev);
-
- /* Prepend skb with frame type */
- memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1);
-
- BT_DBG("%s: type %d len %d", hdev->name, hci_skb_pkt_type(skb),
- skb->len);
-
- /* Insert skb to shared transport layer's transmit queue.
- * Freeing skb memory is taken care in shared transport layer,
- * so don't free skb memory here.
- */
- pkt_type = hci_skb_pkt_type(skb);
- len = hst->st_write(skb);
- if (len < 0) {
- BT_ERR("ST write failed (%ld)", len);
- /* Try Again, would only fail if UART has gone bad */
- return -EAGAIN;
- }
-
- /* ST accepted our skb. So, Go ahead and do rest */
- hdev->stat.byte_tx += len;
- ti_st_tx_complete(hst, pkt_type);
-
- return 0;
-}
-
-static int bt_ti_probe(struct platform_device *pdev)
-{
- struct ti_st *hst;
- struct hci_dev *hdev;
- int err;
-
- hst = devm_kzalloc(&pdev->dev, sizeof(struct ti_st), GFP_KERNEL);
- if (!hst)
- return -ENOMEM;
-
- /* Expose "hciX" device to user space */
- hdev = hci_alloc_dev();
- if (!hdev)
- return -ENOMEM;
-
- BT_DBG("hdev %p", hdev);
-
- hst->hdev = hdev;
- hdev->bus = HCI_UART;
- hci_set_drvdata(hdev, hst);
- hdev->open = ti_st_open;
- hdev->close = ti_st_close;
- hdev->flush = NULL;
- hdev->send = ti_st_send_frame;
-
- err = hci_register_dev(hdev);
- if (err < 0) {
- BT_ERR("Can't register HCI device error %d", err);
- hci_free_dev(hdev);
- return err;
- }
-
- BT_DBG("HCI device registered (hdev %p)", hdev);
-
- dev_set_drvdata(&pdev->dev, hst);
- return 0;
-}
-
-static int bt_ti_remove(struct platform_device *pdev)
-{
- struct hci_dev *hdev;
- struct ti_st *hst = dev_get_drvdata(&pdev->dev);
-
- if (!hst)
- return -EFAULT;
-
- BT_DBG("%s", hst->hdev->name);
-
- hdev = hst->hdev;
- ti_st_close(hdev);
- hci_unregister_dev(hdev);
-
- hci_free_dev(hdev);
-
- dev_set_drvdata(&pdev->dev, NULL);
- return 0;
-}
-
-static struct platform_driver btwilink_driver = {
- .probe = bt_ti_probe,
- .remove = bt_ti_remove,
- .driver = {
- .name = "btwilink",
- },
-};
-
-module_platform_driver(btwilink_driver);
-
-/* ------ Module Info ------ */
-
-MODULE_AUTHOR("Raja Mani <raja_mani@ti.com>");
-MODULE_DESCRIPTION("Bluetooth Driver for TI Shared Transport" VERSION);
-MODULE_VERSION(VERSION);
-MODULE_LICENSE("GPL");