diff mbox series

[5/6] media: ov5640: Set JPEG output timings when outputting JPEG data

Message ID 20190118085206.2598-6-wens@csie.org (mailing list archive)
State New, archived
Headers show
Series media: ov5640: JPEG and test pattern improvements | expand

Commit Message

Chen-Yu Tsai Jan. 18, 2019, 8:52 a.m. UTC
When compression is turned on, the on-bus data is framed according to
the compression mode, and the height and width set in VFIFO_VSIZE and
VFIFO_HSIZE. If these are not updated correctly, the sensor will send
data framed in a manner unexpected by the capture interface, such as
having more bytes per line than expected, and having the extra data
dropped. This ultimately results in corrupted data.

Set the two values when the media bus is configured for JPEG data,
meaning the sensor would be in JPEG mode.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 drivers/media/i2c/ov5640.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
diff mbox series

Patch

diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index 13311483792c..1c1dc401c678 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -83,6 +83,8 @@ 
 #define OV5640_REG_SIGMADELTA_CTRL0C	0x3c0c
 #define OV5640_REG_FRAME_CTRL01		0x4202
 #define OV5640_REG_FORMAT_CONTROL00	0x4300
+#define OV5640_REG_VFIFO_HSIZE		0x4602
+#define OV5640_REG_VFIFO_VSIZE		0x4604
 #define OV5640_REG_POLARITY_CTRL00	0x4740
 #define OV5640_REG_MIPI_CTRL00		0x4800
 #define OV5640_REG_DEBUG_MODE		0x4814
@@ -1043,12 +1045,31 @@  static int ov5640_set_dvp_pclk(struct ov5640_dev *sensor, unsigned long rate)
 			      (ilog2(pclk_div) << 4));
 }
 
+/* set JPEG framing sizes */
+static int ov5640_set_jpeg_timings(struct ov5640_dev *sensor,
+				   const struct ov5640_mode_info *mode)
+{
+	int ret;
+
+	ret = ov5640_write_reg16(sensor, OV5640_REG_VFIFO_HSIZE, mode->hact);
+	if (ret < 0)
+		return ret;
+
+	return ov5640_write_reg16(sensor, OV5640_REG_VFIFO_VSIZE, mode->vact);
+}
+
 /* download ov5640 settings to sensor through i2c */
 static int ov5640_set_timings(struct ov5640_dev *sensor,
 			      const struct ov5640_mode_info *mode)
 {
 	int ret;
 
+	if (sensor->fmt.code == MEDIA_BUS_FMT_JPEG_1X8) {
+		ret = ov5640_set_jpeg_timings(sensor, mode);
+		if (ret < 0)
+			return ret;
+	}
+
 	ret = ov5640_write_reg16(sensor, OV5640_REG_TIMING_DVPHO, mode->hact);
 	if (ret < 0)
 		return ret;