diff mbox series

[v3,3/3] rcar-csi2: Move setting of Field Detection Control Register

Message ID 20190312235019.23420-4-niklas.soderlund+renesas@ragnatech.se (mailing list archive)
State New, archived
Headers show
Series rcar-csi2: Update start procedures to latest revision of datasheet | expand

Commit Message

Niklas Söderlund March 12, 2019, 11:50 p.m. UTC 
Later datasheet versions (rev 1.00) clarifies that the FLD register
should be set after LINKCNT.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/media/platform/rcar-vin/rcar-csi2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c
index 0a4a71be60bee89b..b8017743b2dcfb08 100644
--- a/drivers/media/platform/rcar-vin/rcar-csi2.c
+++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
@@ -530,7 +530,6 @@  static int rcsi2_start_receiver(struct rcar_csi2 *priv)
 	rcsi2_write(priv, PHTC_REG, 0);
 
 	/* Configure */
-	rcsi2_write(priv, FLD_REG, fld);
 	rcsi2_write(priv, VCDT_REG, vcdt);
 	if (vcdt2)
 		rcsi2_write(priv, VCDT2_REG, vcdt2);
@@ -561,6 +560,7 @@  static int rcsi2_start_receiver(struct rcar_csi2 *priv)
 	rcsi2_write(priv, PHYCNT_REG, phycnt);
 	rcsi2_write(priv, LINKCNT_REG, LINKCNT_MONITOR_EN |
 		    LINKCNT_REG_MONI_PACT_EN | LINKCNT_ICLK_NONSTOP);
+	rcsi2_write(priv, FLD_REG, fld);
 	rcsi2_write(priv, PHYCNT_REG, phycnt | PHYCNT_SHUTDOWNZ);
 	rcsi2_write(priv, PHYCNT_REG, phycnt | PHYCNT_SHUTDOWNZ | PHYCNT_RSTZ);