@@ -39,6 +39,9 @@ static const u32 vimc_sca_supported_pixfmt[] = {
V4L2_PIX_FMT_BGR24,
V4L2_PIX_FMT_RGB24,
V4L2_PIX_FMT_ARGB32,
+ V4L2_PIX_FMT_YUV420,
+ V4L2_PIX_FMT_YUV420M,
+ V4L2_PIX_FMT_NV12M,
};
struct vimc_sca_device {
@@ -51,8 +54,8 @@ struct vimc_sca_device {
struct v4l2_mbus_framefmt sink_fmt;
/* Values calculated when the stream starts */
struct vimc_frame src_frame;
- unsigned int src_line_size;
- unsigned int bpp;
+ unsigned int src_line_size[TPG_MAX_PLANES];
+ unsigned int bpp[TPG_MAX_PLANES];
};
static const struct v4l2_mbus_framefmt sink_fmt_default = {
@@ -207,10 +210,10 @@ static const struct v4l2_subdev_pad_ops vimc_sca_pad_ops = {
static int vimc_sca_s_stream(struct v4l2_subdev *sd, int enable)
{
struct vimc_sca_device *vsca = v4l2_get_subdevdata(sd);
+ unsigned int i, ret = 0;
if (enable) {
u32 pixelformat = vsca->ved.stream->producer_pixfmt;
- const struct v4l2_format_info *pix_info;
unsigned int frame_size;
if (!vimc_sca_is_pixfmt_supported(pixelformat)) {
@@ -219,35 +222,46 @@ static int vimc_sca_s_stream(struct v4l2_subdev *sd, int enable)
return -EINVAL;
}
- /* Save the bytes per pixel of the sink */
- pix_info = v4l2_format_info(pixelformat);
- vsca->bpp = pix_info->bpp[0];
-
- /* Calculate the width in bytes of the src frame */
- vsca->src_line_size = vsca->sink_fmt.width *
- sca_mult * vsca->bpp;
-
- /* Calculate the frame size of the source pad */
- frame_size = vsca->src_line_size * vsca->sink_fmt.height *
- sca_mult;
-
- /* Allocate the frame buffer. Use vmalloc to be able to
- * allocate a large amount of memory
- */
- vsca->src_frame.plane_addr[0] = vmalloc(frame_size);
- vsca->src_frame.sizeimage[0] = frame_size;
- if (!vsca->src_frame.plane_addr[0])
- return -ENOMEM;
+ vimc_fill_frame(&vsca->src_frame, pixelformat,
+ vsca->sink_fmt.width, vsca->sink_fmt.height,
+ vsca->ved.stream->multiplanar);
+
+ for (i = 0; i < vsca->src_frame.num_planes; i++) {
+ /* Save the bytes per pixel of the sink */
+ vsca->bpp[i] = vsca->src_frame.bpp[i];
+
+ /* Calculate the width in bytes of the src frame */
+ vsca->src_line_size[i] =
+ vsca->src_frame.bytesperline[i] * sca_mult;
+
+ /* Calculate the frame size of the source pad */
+ frame_size = vsca->src_frame.sizeimage[i] *
+ sca_mult * sca_mult;
+
+ /**
+ * Allocate the frame buffer. Use vmalloc to be able to
+ * allocate a large amount of memory
+ */
+ vsca->src_frame.plane_addr[i] = vmalloc(frame_size);
+ if (!vsca->src_frame.plane_addr[i]) {
+ ret = -ENOMEM;
+ goto free_planes;
+ }
+ vsca->src_frame.sizeimage[i] = frame_size;
+ }
} else {
if (!vsca->src_frame.plane_addr[0])
return 0;
- vfree(vsca->src_frame.plane_addr[0]);
- vsca->src_frame.plane_addr[0] = NULL;
+free_planes:
+ for (i = 0; i < vsca->src_frame.num_planes; i++) {
+ vfree(vsca->src_frame.plane_addr[i]);
+ vsca->src_frame.plane_addr[i] = NULL;
+ }
}
- return 0;
+ return ret;
}
static const struct v4l2_subdev_video_ops vimc_sca_video_ops = {
@@ -270,18 +284,19 @@ static void vimc_sca_fill_pix(u8 *const ptr,
ptr[i] = pixel[i];
}
-static void vimc_sca_scale_pix(const struct vimc_sca_device *const vsca,
+/* TODO: parallelize this function */
+static void vimc_sca_scale_plane(const struct vimc_sca_device *const vsca,
const unsigned int lin, const unsigned int col,
- const u8 *const sink_frame)
+ const struct vimc_frame *sink_frame,
+ u8 num_plane, u32 width)
+
{
unsigned int i, j, index;
const u8 *pixel;
/* Point to the pixel value in position (lin, col) in the sink frame */
- index = VIMC_FRAME_INDEX(lin, col,
- vsca->sink_fmt.width,
- vsca->bpp);
- pixel = &sink_frame[index];
+ index = VIMC_FRAME_INDEX(lin, col, width, vsca->bpp[num_plane]);
+ pixel = &sink_frame->plane_addr[num_plane][index];
dev_dbg(vsca->dev,
"sca: %s: --- scale_pix sink pos %dx%d, index %d ---\n",
@@ -291,7 +306,7 @@ static void vimc_sca_scale_pix(const struct vimc_sca_device *const vsca,
* in the scaled src frame
*/
index = VIMC_FRAME_INDEX(lin * sca_mult, col * sca_mult,
- vsca->sink_fmt.width * sca_mult, vsca->bpp);
+ width * sca_mult, vsca->bpp[num_plane]);
dev_dbg(vsca->dev, "sca: %s: scale_pix src pos %dx%d, index %d\n",
vsca->sd.name, lin * sca_mult, col * sca_mult, index);
@@ -301,32 +316,46 @@ static void vimc_sca_scale_pix(const struct vimc_sca_device *const vsca,
/* Iterate through each beginning of a
* pixel repetition in a line
*/
- for (j = 0; j < sca_mult * vsca->bpp; j += vsca->bpp) {
+ unsigned int bpp = vsca->bpp[num_plane];
+
+ for (j = 0; j < sca_mult * bpp; j += bpp) {
dev_dbg(vsca->dev,
"sca: %s: sca: scale_pix src pos %d\n",
vsca->sd.name, index + j);
/* copy the pixel to the position index + j */
vimc_sca_fill_pix(
- &vsca->src_frame.plane_addr[0][index + j],
- pixel, vsca->bpp);
+ &vsca->src_frame.plane_addr[num_plane][index+j],
+ pixel, bpp);
}
/* move the index to the next line */
- index += vsca->src_line_size;
+ index += vsca->src_line_size[num_plane];
}
}
static void vimc_sca_fill_src_frame(const struct vimc_sca_device *const vsca,
- const u8 *const sink_frame)
+ const struct vimc_frame *sink_frame)
{
- unsigned int i, j;
+ u32 i, j, width, height;
+ unsigned int num_plane;
+ const struct v4l2_format_info *info;
+
+ info = v4l2_format_info(sink_frame->pixelformat);
/* Scale each pixel from the original sink frame */
/* TODO: implement scale down, only scale up is supported for now */
- for (i = 0; i < vsca->sink_fmt.height; i++)
- for (j = 0; j < vsca->sink_fmt.width; j++)
- vimc_sca_scale_pix(vsca, i, j, sink_frame);
+ for (num_plane = 0; num_plane < info->comp_planes; num_plane++) {
+ width = vsca->sink_fmt.width /
+ ((num_plane == 0) ? 1 : info->vdiv);
+ height = vsca->sink_fmt.height /
+ ((num_plane == 0) ? 1 : info->hdiv);
+
+ for (i = 0; i < height; i++)
+ for (j = 0; j < width; j++)
+ vimc_sca_scale_plane(vsca, i, j, sink_frame,
+ num_plane, width);
+ }
}
static struct vimc_frame *vimc_sca_process_frame(struct vimc_ent_device *ved,
@@ -339,7 +368,7 @@ static struct vimc_frame *vimc_sca_process_frame(struct vimc_ent_device *ved,
if (!ved->stream)
return ERR_PTR(-EINVAL);
- vimc_sca_fill_src_frame(vsca, sink_frame->plane_addr[0]);
+ vimc_sca_fill_src_frame(vsca, sink_frame);
return &vsca->src_frame;
};
Change the scaling functions in order to scale planes. This change makes easier to support multiplanar pixel formats. Signed-off-by: André Almeida <andrealmeid@collabora.com> --- Changes in v2: - Move the TODO comment to vimc-capture - Reuse and share the code to free the memory of planes with a goto - Fix comment block style drivers/media/platform/vimc/vimc-scaler.c | 113 ++++++++++++++-------- 1 file changed, 71 insertions(+), 42 deletions(-)