diff mbox series

[5/6] ARM: dts: sun8i: a83t: Add I2C2 pinmux setting for PE pins

Message ID 20190408165744.11672-6-wens@kernel.org (mailing list archive)
State New, archived
Headers show
Series ARM: sun8i: a83t: Support Camera Sensor Interface controller | expand

Commit Message

Chen-Yu Tsai April 8, 2019, 4:57 p.m. UTC 
From: Chen-Yu Tsai <wens@csie.org>

I2C2 is available on the PE pingroup, on the same pins as the camera
sensor interface (CSI) controller's camera control interface pins.
This provides an option to use I2C2 instead of that control interface
to configure camera sensors.

Add a pinctrl node for it. The property /omit-if-no-ref/ is added to
keep the device tree blob size down if it is unused.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 arch/arm/boot/dts/sun8i-a83t.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

Comments

Maxime Ripard April 9, 2019, 7:58 a.m. UTC | #1 
On Tue, Apr 09, 2019 at 12:57:43AM +0800, Chen-Yu Tsai wrote:
> From: Chen-Yu Tsai <wens@csie.org>
>
> I2C2 is available on the PE pingroup, on the same pins as the camera
> sensor interface (CSI) controller's camera control interface pins.
> This provides an option to use I2C2 instead of that control interface
> to configure camera sensors.
>
> Add a pinctrl node for it. The property /omit-if-no-ref/ is added to
> keep the device tree blob size down if it is unused.
>
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>

Applied, thanks!
Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index 0c52f945fd5f..350ea40ea560 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -723,6 +723,12 @@ 
 				function = "i2c1";
 			};
 
+			/omit-if-no-ref/
+			i2c2_pe_pins: i2c2-pe-pins {
+				pins = "PE14", "PE15";
+				function = "i2c2";
+			};
+
 			i2c2_ph_pins: i2c2-ph-pins {
 				pins = "PH4", "PH5";
 				function = "i2c2";