@@ -58,6 +58,15 @@
#define OV5645_SDE_SAT_U 0x5583
#define OV5645_SDE_SAT_V 0x5584
+/* regulator supplies */
+static const char * const ov5645_supply_name[] = {
+ "vdddo", /* Digital I/O (1.8V) supply */
+ "vdda", /* Analog (2.8V) supply */
+ "vddd", /* Digital Core (1.5V) supply */
+};
+
+#define OV5645_NUM_SUPPLIES ARRAY_SIZE(ov5645_supply_name)
+
struct reg_value {
u16 reg;
u8 val;
@@ -82,9 +91,7 @@ struct ov5645 {
struct v4l2_rect crop;
struct clk *xclk;
- struct regulator *io_regulator;
- struct regulator *core_regulator;
- struct regulator *analog_regulator;
+ struct regulator_bulk_data supplies[OV5645_NUM_SUPPLIES];
const struct ov5645_mode_info *current_mode;
@@ -529,55 +536,6 @@ static const struct ov5645_mode_info ov5645_mode_info_data[] = {
},
};
-static int ov5645_regulators_enable(struct ov5645 *ov5645)
-{
- int ret;
-
- ret = regulator_enable(ov5645->io_regulator);
- if (ret < 0) {
- dev_err(ov5645->dev, "set io voltage failed\n");
- return ret;
- }
-
- ret = regulator_enable(ov5645->analog_regulator);
- if (ret) {
- dev_err(ov5645->dev, "set analog voltage failed\n");
- goto err_disable_io;
- }
-
- ret = regulator_enable(ov5645->core_regulator);
- if (ret) {
- dev_err(ov5645->dev, "set core voltage failed\n");
- goto err_disable_analog;
- }
-
- return 0;
-
-err_disable_analog:
- regulator_disable(ov5645->analog_regulator);
-err_disable_io:
- regulator_disable(ov5645->io_regulator);
-
- return ret;
-}
-
-static void ov5645_regulators_disable(struct ov5645 *ov5645)
-{
- int ret;
-
- ret = regulator_disable(ov5645->core_regulator);
- if (ret < 0)
- dev_err(ov5645->dev, "core regulator disable failed\n");
-
- ret = regulator_disable(ov5645->analog_regulator);
- if (ret < 0)
- dev_err(ov5645->dev, "analog regulator disable failed\n");
-
- ret = regulator_disable(ov5645->io_regulator);
- if (ret < 0)
- dev_err(ov5645->dev, "io regulator disable failed\n");
-}
-
static int ov5645_write_reg(struct ov5645 *ov5645, u16 reg, u8 val)
{
u8 regbuf[3];
@@ -676,15 +634,14 @@ static int ov5645_set_power_on(struct ov5645 *ov5645)
{
int ret;
- ret = ov5645_regulators_enable(ov5645);
- if (ret < 0) {
+ ret = regulator_bulk_enable(OV5645_NUM_SUPPLIES, ov5645->supplies);
+ if (ret < 0)
return ret;
- }
ret = clk_prepare_enable(ov5645->xclk);
if (ret < 0) {
dev_err(ov5645->dev, "clk prepare enable failed\n");
- ov5645_regulators_disable(ov5645);
+ regulator_bulk_disable(OV5645_NUM_SUPPLIES, ov5645->supplies);
return ret;
}
@@ -704,7 +661,7 @@ static void ov5645_set_power_off(struct ov5645 *ov5645)
gpiod_set_value_cansleep(ov5645->rst_gpio, 1);
gpiod_set_value_cansleep(ov5645->enable_gpio, 0);
clk_disable_unprepare(ov5645->xclk);
- ov5645_regulators_disable(ov5645);
+ regulator_bulk_disable(OV5645_NUM_SUPPLIES, ov5645->supplies);
}
static int ov5645_s_power(struct v4l2_subdev *sd, int on)
@@ -1089,6 +1046,7 @@ static int ov5645_probe(struct i2c_client *client,
struct device_node *endpoint;
struct ov5645 *ov5645;
u8 chip_id_high, chip_id_low;
+ unsigned int i;
u32 xclk_freq;
int ret;
@@ -1146,23 +1104,13 @@ static int ov5645_probe(struct i2c_client *client,
return ret;
}
- ov5645->io_regulator = devm_regulator_get(dev, "vdddo");
- if (IS_ERR(ov5645->io_regulator)) {
- dev_err(dev, "cannot get io regulator\n");
- return PTR_ERR(ov5645->io_regulator);
- }
-
- ov5645->core_regulator = devm_regulator_get(dev, "vddd");
- if (IS_ERR(ov5645->core_regulator)) {
- dev_err(dev, "cannot get core regulator\n");
- return PTR_ERR(ov5645->core_regulator);
- }
+ for (i = 0; i < OV5645_NUM_SUPPLIES; i++)
+ ov5645->supplies[i].supply = ov5645_supply_name[i];
- ov5645->analog_regulator = devm_regulator_get(dev, "vdda");
- if (IS_ERR(ov5645->analog_regulator)) {
- dev_err(dev, "cannot get analog regulator\n");
- return PTR_ERR(ov5645->analog_regulator);
- }
+ ret = devm_regulator_bulk_get(dev, OV5645_NUM_SUPPLIES,
+ ov5645->supplies);
+ if (ret < 0)
+ return ret;
ov5645->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_HIGH);
if (IS_ERR(ov5645->enable_gpio)) {
The code can be simplified by using the regulator_bulk() functions, so switch to it. Signed-off-by: Fabio Estevam <festevam@gmail.com> --- Changes since v1: - Retain the regulator enable ordering (Sakari) drivers/media/i2c/ov5645.c | 94 +++++++++----------------------------- 1 file changed, 21 insertions(+), 73 deletions(-)