@@ -14,6 +14,154 @@
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+struct gl861 {
+ /* USB control message buffer */
+ u8 buf[16];
+
+ struct i2c_adapter *demod_sub_i2c;
+ struct i2c_client *i2c_client_demod;
+ struct i2c_client *i2c_client_tuner;
+ struct i2c_adapter tuner_adap;
+};
+
+#define CMD_WRITE_SHORT 0x01
+#define CMD_READ 0x02
+#define CMD_WRITE 0x03
+
+static int gl861_ctrl_msg(struct dvb_usb_device *d, u8 request, u16 value,
+ u16 index, void *data, u16 size)
+{
+ struct gl861 *ctx = d_to_priv(d);
+ struct usb_interface *intf = d->intf;
+ int ret;
+ unsigned int pipe;
+ u8 requesttype;
+
+ mutex_lock(&d->usb_mutex);
+
+ switch (request) {
+ case CMD_WRITE:
+ memcpy(ctx->buf, data, size);
+ /* Fall through */
+ case CMD_WRITE_SHORT:
+ pipe = usb_sndctrlpipe(d->udev, 0);
+ requesttype = USB_TYPE_VENDOR | USB_DIR_OUT;
+ break;
+ case CMD_READ:
+ pipe = usb_rcvctrlpipe(d->udev, 0);
+ requesttype = USB_TYPE_VENDOR | USB_DIR_IN;
+ break;
+ default:
+ ret = -EINVAL;
+ goto err_mutex_unlock;
+ }
+
+ ret = usb_control_msg(d->udev, pipe, request, requesttype, value,
+ index, ctx->buf, size, 200);
+ dev_dbg(&intf->dev, "%d | %02x %02x %*ph %*ph %*ph %s %*ph\n",
+ ret, requesttype, request, 2, &value, 2, &index, 2, &size,
+ (requesttype & USB_DIR_IN) ? "<<<" : ">>>", size, ctx->buf);
+ if (ret < 0)
+ goto err_mutex_unlock;
+
+ if (request == CMD_READ)
+ memcpy(data, ctx->buf, size);
+
+ usleep_range(1000, 2000); /* Avoid I2C errors */
+
+ mutex_unlock(&d->usb_mutex);
+
+ return 0;
+
+err_mutex_unlock:
+ mutex_unlock(&d->usb_mutex);
+ dev_dbg(&intf->dev, "failed %d\n", ret);
+ return ret;
+}
+
+static int gl861_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
+ int num)
+{
+ struct dvb_usb_device *d = i2c_get_adapdata(adap);
+ struct usb_interface *intf = d->intf;
+ struct gl861 *ctx = d_to_priv(d);
+ int ret;
+ u8 request, *data;
+ u16 value, index, size;
+
+ /* XXX: I2C adapter maximum data lengths are not tested */
+ if (num == 1 && !(msg[0].flags & I2C_M_RD)) {
+ /* I2C write */
+ if (msg[0].len < 2 || msg[0].len > sizeof(ctx->buf)) {
+ ret = -EOPNOTSUPP;
+ goto err;
+ }
+
+ value = (msg[0].addr << 1) << 8;
+ index = msg[0].buf[0];
+
+ if (msg[0].len == 2) {
+ request = CMD_WRITE_SHORT;
+ value |= msg[0].buf[1];
+ size = 0;
+ data = NULL;
+ } else {
+ request = CMD_WRITE;
+ size = msg[0].len - 1;
+ data = &msg[0].buf[1];
+ }
+
+ ret = gl861_ctrl_msg(d, request, value, index, data, size);
+ } else if (num == 2 && !(msg[0].flags & I2C_M_RD) &&
+ (msg[1].flags & I2C_M_RD)) {
+ /* I2C write + read */
+ if (msg[0].len > 1 || msg[1].len > sizeof(ctx->buf)) {
+ ret = -EOPNOTSUPP;
+ goto err;
+ }
+
+ value = (msg[0].addr << 1) << 8;
+ index = msg[0].buf[0];
+ request = CMD_READ;
+
+ ret = gl861_ctrl_msg(d, request, value, index,
+ msg[1].buf, msg[1].len);
+ } else if (num == 1 && (msg[0].flags & I2C_M_RD)) {
+ /* I2C read */
+ if (msg[0].len > sizeof(ctx->buf)) {
+ ret = -EOPNOTSUPP;
+ goto err;
+ }
+ value = (msg[0].addr << 1) << 8;
+ index = 0x0100;
+ request = CMD_READ;
+
+ ret = gl861_ctrl_msg(d, request, value, index,
+ msg[0].buf, msg[0].len);
+ } else {
+ /* Unsupported I2C message */
+ dev_dbg(&intf->dev, "unknown i2c msg, num %u\n", num);
+ ret = -EOPNOTSUPP;
+ }
+ if (ret)
+ goto err;
+
+ return num;
+err:
+ dev_dbg(&intf->dev, "failed %d\n", ret);
+ return ret;
+}
+
+static u32 gl861_i2c_functionality(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm gl861_i2c_algo = {
+ .master_xfer = gl861_i2c_master_xfer,
+ .functionality = gl861_i2c_functionality,
+};
+
static int gl861_i2c_msg(struct dvb_usb_device *d, u8 addr,
u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
{
@@ -63,46 +211,6 @@ static int gl861_i2c_msg(struct dvb_usb_device *d, u8 addr,
return ret;
}
-/* I2C */
-static int gl861_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
- int num)
-{
- struct dvb_usb_device *d = i2c_get_adapdata(adap);
- int i;
-
- if (num > 2)
- return -EINVAL;
-
- if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
- return -EAGAIN;
-
- for (i = 0; i < num; i++) {
- /* write/read request */
- if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) {
- if (gl861_i2c_msg(d, msg[i].addr, msg[i].buf,
- msg[i].len, msg[i+1].buf, msg[i+1].len) < 0)
- break;
- i++;
- } else
- if (gl861_i2c_msg(d, msg[i].addr, msg[i].buf,
- msg[i].len, NULL, 0) < 0)
- break;
- }
-
- mutex_unlock(&d->i2c_mutex);
- return i;
-}
-
-static u32 gl861_i2c_func(struct i2c_adapter *adapter)
-{
- return I2C_FUNC_I2C;
-}
-
-static struct i2c_algorithm gl861_i2c_algo = {
- .master_xfer = gl861_i2c_xfer,
- .functionality = gl861_i2c_func,
-};
-
/* Callbacks for DVB USB */
static struct zl10353_config gl861_zl10353_config = {
.demod_address = 0x0f,
@@ -149,6 +257,8 @@ static struct dvb_usb_device_properties gl861_props = {
.owner = THIS_MODULE,
.adapter_nr = adapter_nr,
+ .size_of_priv = sizeof(struct gl861),
+
.i2c_algo = &gl861_i2c_algo,
.frontend_attach = gl861_frontend_attach,
.tuner_attach = gl861_tuner_attach,
@@ -166,14 +276,6 @@ static struct dvb_usb_device_properties gl861_props = {
/*
* For Friio
*/
-
-struct friio_priv {
- struct i2c_adapter *demod_sub_i2c;
- struct i2c_client *i2c_client_demod;
- struct i2c_client *i2c_client_tuner;
- struct i2c_adapter tuner_adap;
-};
-
struct friio_config {
struct i2c_board_info demod_info;
struct tc90522_config demod_cfg;
@@ -242,7 +344,7 @@ gl861_i2c_read_ex(struct dvb_usb_device *d, u8 addr, u8 *rbuf, u16 rlen)
static int
friio_i2c_tuner_read(struct dvb_usb_device *d, struct i2c_msg *msg)
{
- struct friio_priv *priv;
+ struct gl861 *priv;
u8 addr;
priv = d_to_priv(d);
@@ -255,7 +357,7 @@ friio_i2c_tuner_write(struct dvb_usb_device *d, struct i2c_msg *msg)
{
u8 *buf;
int ret;
- struct friio_priv *priv;
+ struct gl861 *priv;
priv = d_to_priv(d);
@@ -308,7 +410,7 @@ static int friio_tuner_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
static struct i2c_algorithm friio_tuner_i2c_algo = {
.master_xfer = friio_tuner_i2c_xfer,
- .functionality = gl861_i2c_func,
+ .functionality = gl861_i2c_functionality,
};
/* GPIO control in Friio */
@@ -488,7 +590,7 @@ static int friio_frontend_attach(struct dvb_usb_adapter *adap)
struct dvb_usb_device *d;
struct tc90522_config cfg;
struct i2c_client *cl;
- struct friio_priv *priv;
+ struct gl861 *priv;
info = &friio_config.demod_info;
d = adap_to_d(adap);
@@ -513,7 +615,7 @@ static int friio_frontend_attach(struct dvb_usb_adapter *adap)
static int friio_frontend_detach(struct dvb_usb_adapter *adap)
{
- struct friio_priv *priv;
+ struct gl861 *priv;
priv = adap_to_priv(adap);
i2c_del_adapter(&priv->tuner_adap);
@@ -526,7 +628,7 @@ static int friio_tuner_attach(struct dvb_usb_adapter *adap)
const struct i2c_board_info *info;
struct dvb_pll_config cfg;
struct i2c_client *cl;
- struct friio_priv *priv;
+ struct gl861 *priv;
priv = adap_to_priv(adap);
info = &friio_config.tuner_info;
@@ -543,7 +645,7 @@ static int friio_tuner_attach(struct dvb_usb_adapter *adap)
static int friio_tuner_detach(struct dvb_usb_adapter *adap)
{
- struct friio_priv *priv;
+ struct gl861 *priv;
priv = adap_to_priv(adap);
dvb_module_release(priv->i2c_client_tuner);
@@ -554,7 +656,7 @@ static int friio_init(struct dvb_usb_device *d)
{
int i;
int ret;
- struct friio_priv *priv;
+ struct gl861 *priv;
static const u8 demod_init[][2] = {
{0x01, 0x40}, {0x04, 0x38}, {0x05, 0x40}, {0x07, 0x40},
@@ -606,7 +708,7 @@ static struct dvb_usb_device_properties friio_props = {
.owner = THIS_MODULE,
.adapter_nr = adapter_nr,
- .size_of_priv = sizeof(struct friio_priv),
+ .size_of_priv = sizeof(struct gl861),
.i2c_algo = &gl861_i2c_algo,
.power_ctrl = friio_power_ctrl,
Device I2C adapter is capable of writing and reading large messages. For I2C writes there is 2 methods: simple for max 2 byte messages and usb_control_msg() with payload data for larger I2C messages. Add I2C adapter logic which selects suitable method according to message size. Add also support for plain I2C read. Cc: Akihiro TSUKADA <tskd08@gmail.com> Signed-off-by: Antti Palosaari <crope@iki.fi> --- drivers/media/usb/dvb-usb-v2/gl861.c | 216 ++++++++++++++++++++------- 1 file changed, 159 insertions(+), 57 deletions(-)