@@ -197,7 +197,6 @@ struct ov6650 {
struct v4l2_clk *clk;
bool half_scale; /* scale down output by 2 */
struct v4l2_rect rect; /* sensor cropping window */
- unsigned long pclk_limit; /* from host */
unsigned long pclk_max; /* from resolution and format */
struct v4l2_fract tpf; /* as requested with s_frame_interval */
u32 code;
@@ -546,8 +545,7 @@ static bool is_unscaled_ok(int width, int height, struct v4l2_rect *rect)
return width > rect->width >> 1 || height > rect->height >> 1;
}
-static u8 to_clkrc(struct v4l2_fract *timeperframe,
- unsigned long pclk_limit, unsigned long pclk_max)
+static u8 to_clkrc(struct v4l2_fract *timeperframe, unsigned long pclk_max)
{
unsigned long pclk;
@@ -557,9 +555,6 @@ static u8 to_clkrc(struct v4l2_fract *timeperframe,
else
pclk = pclk_max;
- if (pclk_limit && pclk_limit < pclk)
- pclk = pclk_limit;
-
return (pclk_max - 1) / pclk;
}
@@ -653,10 +648,9 @@ static int ov6650_s_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *mf)
clkrc = CLKRC_12MHz;
mclk = 12000000;
- priv->pclk_limit = 1334000;
dev_dbg(&client->dev, "using 12MHz input clock\n");
- clkrc |= to_clkrc(&priv->tpf, priv->pclk_limit, priv->pclk_max);
+ clkrc |= to_clkrc(&priv->tpf, priv->pclk_max);
pclk = priv->pclk_max / GET_CLKRC_DIV(clkrc);
dev_dbg(&client->dev, "pixel clock divider: %ld.%ld\n",
@@ -756,7 +750,7 @@ static int ov6650_g_frame_interval(struct v4l2_subdev *sd,
struct ov6650 *priv = to_ov6650(client);
ival->interval.numerator = GET_CLKRC_DIV(to_clkrc(&priv->tpf,
- priv->pclk_limit, priv->pclk_max));
+ priv->pclk_max));
ival->interval.denominator = FRAME_RATE_MAX;
dev_dbg(&client->dev, "Frame interval: %u/%u s\n",
@@ -787,7 +781,7 @@ static int ov6650_s_frame_interval(struct v4l2_subdev *sd,
tpf->numerator = div;
tpf->denominator = FRAME_RATE_MAX;
- clkrc = to_clkrc(tpf, priv->pclk_limit, priv->pclk_max);
+ clkrc = to_clkrc(tpf, priv->pclk_max);
ret = ov6650_reg_rmw(client, REG_CLKRC, clkrc, CLKRC_DIV_MASK);
if (!ret) {
That attribute used to be obtained from platform data by a soc_camera host interface and passed to the sensor driver for .s_mbus_fmt() video operation callback, later reused as .set_fmt() pad operation callback, to be able to limit frame rate. The driver stored that value in its private structure for further use from .g/s_parm(), later converted to g/s_frame_interval(). On conversion of the driver from soc_camera sensor to a standalone V4L2 subdevice by commit 23a52386fabe ("media: ov6650: convert to standalone v4l2 subdevice"), that attribute had been replaced by a constant and hardcoded to an arbitrarily chosen pixel clock limit. Drop it. Host interfaces can limit frame rate if needed by calling .s_frame_interval(). Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> --- drivers/media/i2c/ov6650.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-)