Message ID | 20191014135424.7000-1-festevam@gmail.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | [v2,1/3] media: imx.rst: Specify the sabreauto variant | expand |
On 10/14/19 6:54 AM, Fabio Estevam wrote: > Improve the documentation by specifying that the instructions > are related to the i.MX6Q sabreauto variant. > > This avoids confusion if someone follows these steps on a i.MX6DL > sabreauto, which has different numbering on the I2C bus and > I2C muxes. > > Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Steve Longerbeam <slongerbeam@gmail.com> > --- > Changes since v1: > - New patch > > Documentation/media/v4l-drivers/imx.rst | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/Documentation/media/v4l-drivers/imx.rst b/Documentation/media/v4l-drivers/imx.rst > index 1d7eb8c7bd5c..3d72e411b93d 100644 > --- a/Documentation/media/v4l-drivers/imx.rst > +++ b/Documentation/media/v4l-drivers/imx.rst > @@ -515,10 +515,10 @@ Streaming can then begin independently on the capture device nodes > be used to select any supported YUV pixelformat on the capture device > nodes, including planar. > > -SabreAuto with ADV7180 decoder > ------------------------------- > +i.MX6Q SabreAuto with ADV7180 decoder > +------------------------------------- > > -On the SabreAuto, an on-board ADV7180 SD decoder is connected to the > +On the i.MX6Q SabreAuto, an on-board ADV7180 SD decoder is connected to the > parallel bus input on the internal video mux to IPU1 CSI0. > > The following example configures a pipeline to capture from the ADV7180
diff --git a/Documentation/media/v4l-drivers/imx.rst b/Documentation/media/v4l-drivers/imx.rst index 1d7eb8c7bd5c..3d72e411b93d 100644 --- a/Documentation/media/v4l-drivers/imx.rst +++ b/Documentation/media/v4l-drivers/imx.rst @@ -515,10 +515,10 @@ Streaming can then begin independently on the capture device nodes be used to select any supported YUV pixelformat on the capture device nodes, including planar. -SabreAuto with ADV7180 decoder ------------------------------- +i.MX6Q SabreAuto with ADV7180 decoder +------------------------------------- -On the SabreAuto, an on-board ADV7180 SD decoder is connected to the +On the i.MX6Q SabreAuto, an on-board ADV7180 SD decoder is connected to the parallel bus input on the internal video mux to IPU1 CSI0. The following example configures a pipeline to capture from the ADV7180
Improve the documentation by specifying that the instructions are related to the i.MX6Q sabreauto variant. This avoids confusion if someone follows these steps on a i.MX6DL sabreauto, which has different numbering on the I2C bus and I2C muxes. Signed-off-by: Fabio Estevam <festevam@gmail.com> --- Changes since v1: - New patch Documentation/media/v4l-drivers/imx.rst | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)