diff mbox series

[09/14] ARM: dts: sun8i: r40: Add I2C pinmux options

Message ID 20191215165924.28314-10-wens@kernel.org (mailing list archive)
State New, archived
Headers show
Series media: sun4i-csi: A10/A20 CSI1 and R40 CSI0 support | expand

Commit Message

Chen-Yu Tsai Dec. 15, 2019, 4:59 p.m. UTC 
From: Chen-Yu Tsai <wens@csie.org>

The R40 has five I2C controllers. Currently only I2C0 has its pinmux
option defined.

Add the options for the remaining four, and set them as the default,
since each controller has only one possible pinmux configuration.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 arch/arm/boot/dts/sun8i-r40.dtsi | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

Comments

Maxime Ripard Dec. 16, 2019, 10:29 a.m. UTC | #1 
On Mon, Dec 16, 2019 at 12:59:19AM +0800, Chen-Yu Tsai wrote:
> From: Chen-Yu Tsai <wens@csie.org>
>
> The R40 has five I2C controllers. Currently only I2C0 has its pinmux
> option defined.
>
> Add the options for the remaining four, and set them as the default,
> since each controller has only one possible pinmux configuration.
>
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>

Applied, thanks!
Maxime
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index 421dfbbfd7ee..82ea0b5b0710 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -373,6 +373,26 @@  i2c0_pins: i2c0-pins {
 				function = "i2c0";
 			};
 
+			i2c1_pins: i2c1-pins {
+				pins = "PB18", "PB19";
+				function = "i2c1";
+			};
+
+			i2c2_pins: i2c2-pins {
+				pins = "PB20", "PB21";
+				function = "i2c2";
+			};
+
+			i2c3_pins: i2c3-pins {
+				pins = "PI0", "PI1";
+				function = "i2c3";
+			};
+
+			i2c4_pins: i2c4-pins {
+				pins = "PI2", "PI3";
+				function = "i2c4";
+			};
+
 			mmc0_pins: mmc0-pins {
 				pins = "PF0", "PF1", "PF2",
 				       "PF3", "PF4", "PF5";
@@ -528,6 +548,8 @@  i2c1: i2c@1c2b000 {
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_I2C1>;
 			resets = <&ccu RST_BUS_I2C1>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -539,6 +561,8 @@  i2c2: i2c@1c2b400 {
 			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_I2C2>;
 			resets = <&ccu RST_BUS_I2C2>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -550,6 +574,8 @@  i2c3: i2c@1c2b800 {
 			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_I2C3>;
 			resets = <&ccu RST_BUS_I2C3>;
+			pinctrl-0 = <&i2c3_pins>;
+			pinctrl-names = "default";
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -561,6 +587,8 @@  i2c4: i2c@1c2c000 {
 			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_I2C4>;
 			resets = <&ccu RST_BUS_I2C4>;
+			pinctrl-0 = <&i2c4_pins>;
+			pinctrl-names = "default";
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;