diff mbox series

[v2] media: i2c: imx219: add support for enum frame interval

Message ID 20200227160343.2833-1-eugen.hristev@microchip.com (mailing list archive)
State New, archived
Headers show
Series [v2] media: i2c: imx219: add support for enum frame interval | expand

Commit Message

Eugen Hristev Feb. 27, 2020, 4:03 p.m. UTC
Add support for enum frame intervals IOCTL.
The current supported framerates are only available as comments inside
the code.
Add support for VIDIOC_ENUM_FRAMEINTERVALS as the enum_frame_interval
callback as pad ops.

 # v4l2-ctl --list-frameintervals width=1920,height=1080,pixelformat=RG10
 ioctl: VIDIOC_ENUM_FRAMEINTERVALS
        Interval: Discrete 0.067s (15.000 fps)
        Interval: Discrete 0.033s (30.000 fps)
        Interval: Discrete 0.033s (30.000 fps)

test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
---

Changes in v2:

v4l2-compliance was failing on setting another resolution:

fail: v4l2-test-formats.cpp(126): found frame intervals for invalid size 3281x2464

So fixed now by checking size:

test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK


 drivers/media/i2c/imx219.c | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)
diff mbox series

Patch

diff --git a/drivers/media/i2c/imx219.c b/drivers/media/i2c/imx219.c
index f1effb5a5f66..2bdcaef0c89f 100644
--- a/drivers/media/i2c/imx219.c
+++ b/drivers/media/i2c/imx219.c
@@ -127,6 +127,8 @@  struct imx219_mode {
 	unsigned int width;
 	/* Frame height */
 	unsigned int height;
+	/* Frame rate */
+	u8 fps;
 
 	/* V-timing */
 	unsigned int vts_def;
@@ -381,6 +383,7 @@  static const struct imx219_mode supported_modes[] = {
 		/* 8MPix 15fps mode */
 		.width = 3280,
 		.height = 2464,
+		.fps = 15,
 		.vts_def = IMX219_VTS_15FPS,
 		.reg_list = {
 			.num_of_regs = ARRAY_SIZE(mode_3280x2464_regs),
@@ -391,6 +394,7 @@  static const struct imx219_mode supported_modes[] = {
 		/* 1080P 30fps cropped */
 		.width = 1920,
 		.height = 1080,
+		.fps = 30,
 		.vts_def = IMX219_VTS_30FPS_1080P,
 		.reg_list = {
 			.num_of_regs = ARRAY_SIZE(mode_1920_1080_regs),
@@ -401,6 +405,7 @@  static const struct imx219_mode supported_modes[] = {
 		/* 2x2 binned 30fps mode */
 		.width = 1640,
 		.height = 1232,
+		.fps = 30,
 		.vts_def = IMX219_VTS_30FPS_BINNED,
 		.reg_list = {
 			.num_of_regs = ARRAY_SIZE(mode_1640_1232_regs),
@@ -680,6 +685,36 @@  static int imx219_enum_frame_size(struct v4l2_subdev *sd,
 	return 0;
 }
 
+static int imx219_enum_frame_interval(struct v4l2_subdev *sd,
+				      struct v4l2_subdev_pad_config *cfg,
+				      struct v4l2_subdev_frame_interval_enum *fie)
+{
+	struct imx219 *imx219 = to_imx219(sd);
+	const struct imx219_mode *mode;
+
+	if (fie->index >= ARRAY_SIZE(supported_modes))
+		return -EINVAL;
+
+	if (fie->code != imx219_get_format_code(imx219))
+		return -EINVAL;
+
+	if (fie->pad)
+		return -EINVAL;
+
+	mode = v4l2_find_nearest_size(supported_modes,
+				      ARRAY_SIZE(supported_modes),
+				      width, height,
+				      fie->width, fie->height);
+
+	if (mode->width != fie->width || mode->height != fie->height)
+		return -EINVAL;
+
+	fie->interval.numerator = 1;
+	fie->interval.denominator = supported_modes[fie->index].fps;
+
+	return 0;
+}
+
 static void imx219_reset_colorspace(struct v4l2_mbus_framefmt *fmt)
 {
 	fmt->colorspace = V4L2_COLORSPACE_SRGB;
@@ -1004,6 +1039,7 @@  static const struct v4l2_subdev_pad_ops imx219_pad_ops = {
 	.get_fmt = imx219_get_pad_format,
 	.set_fmt = imx219_set_pad_format,
 	.enum_frame_size = imx219_enum_frame_size,
+	.enum_frame_interval = imx219_enum_frame_interval,
 };
 
 static const struct v4l2_subdev_ops imx219_subdev_ops = {