diff mbox series

[v2,06/18] media: allegro: fix calculation of CPB size

Message ID 20200316152638.19457-7-m.tretter@pengutronix.de (mailing list archive)
State New, archived
Headers show
Series media: allegro: fixes and new features | expand

Commit Message

Michael Tretter March 16, 2020, 3:26 p.m. UTC
The cpb_size is given in kilobytes, but the bitrate is given in bits per
second. Therefore, the calculation of the initial removal delay and the
cpb size for the firmware were wrong.

Convert the bitrate to kilobytes before calculating the cpb size in 90
kHz units for sending it to the firmware. Also reuse the result for the
initial removal delay, to make it obvious that we are setting the
initial removal delay to the maximum value.

Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
---
Changelog:

v1 -> v2:
- Add separate function for calculating CPB for mcu
---
 .../staging/media/allegro-dvt/allegro-core.c  | 25 +++++++++++++++----
 1 file changed, 20 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/drivers/staging/media/allegro-dvt/allegro-core.c b/drivers/staging/media/allegro-dvt/allegro-core.c
index cbe79bc216fd..87592419ec84 100644
--- a/drivers/staging/media/allegro-dvt/allegro-core.c
+++ b/drivers/staging/media/allegro-dvt/allegro-core.c
@@ -5,6 +5,7 @@ 
  * Allegro DVT video encoder driver
  */
 
+#include <linux/bits.h>
 #include <linux/firmware.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
@@ -1053,6 +1054,22 @@  v4l2_bitrate_mode_to_mcu_mode(enum v4l2_mpeg_video_bitrate_mode mode)
 	}
 }
 
+static u32 v4l2_cpb_size_to_mcu(unsigned int cpb_size, unsigned int bitrate)
+{
+	unsigned int cpb_size_kbit;
+	unsigned int bitrate_kbps;
+
+	/*
+	 * The mcu expects the CPB size in units of a 90 kHz clock, but the
+	 * channel follows the V4L2_CID_MPEG_VIDEO_H264_CPB_SIZE and stores
+	 * the CPB size in kilobytes.
+	 */
+	cpb_size_kbit = cpb_size * BITS_PER_BYTE;
+	bitrate_kbps = bitrate / 1000;
+
+	return (cpb_size_kbit * 90000) / bitrate_kbps;
+}
+
 static int allegro_mcu_send_create_channel(struct allegro_dev *dev,
 					   struct allegro_channel *channel)
 {
@@ -1094,12 +1111,10 @@  static int allegro_mcu_send_create_channel(struct allegro_dev *dev,
 
 	msg.rate_control_mode =
 		v4l2_bitrate_mode_to_mcu_mode(channel->bitrate_mode);
+	msg.cpb_size = v4l2_cpb_size_to_mcu(channel->cpb_size,
+					    channel->bitrate_peak);
 	/* Shall be ]0;cpb_size in 90 kHz units]. Use maximum value. */
-	msg.initial_rem_delay =
-		((channel->cpb_size * 1000) / channel->bitrate_peak) * 90000;
-	/* Encoder expects cpb_size in units of a 90 kHz clock. */
-	msg.cpb_size =
-		((channel->cpb_size * 1000) / channel->bitrate_peak) * 90000;
+	msg.initial_rem_delay = msg.cpb_size;
 	msg.framerate = 25;
 	msg.clk_ratio = 1000;
 	msg.target_bitrate = channel->bitrate;