diff mbox series

[v3,17/19] media: ti-vpe: cal: improve wait for CIO resetdone

Message ID 20200325121510.25923-18-tomi.valkeinen@ti.com (mailing list archive)
State New, archived
Headers show
Series CAL fixes and improvements | expand

Commit Message

Tomi Valkeinen March 25, 2020, 12:15 p.m. UTC 
Sometimes there is a timeout when waiting for the 'ComplexIO Reset
Done'.  Testing shows that sometimes we need to wait more than what the
current code does. It is not clear how long this wait can be, but it is
based on how quickly the sensor provides a valid clock, and how quickly
CAL syncs to it.

Change the code to make it more obvious how long we'll wait, and set a
wider range for usleep_range. Increase the timeout to 750ms.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
---
 drivers/media/platform/ti-vpe/cal.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/media/platform/ti-vpe/cal.c b/drivers/media/platform/ti-vpe/cal.c
index e5a319f1fe26..eb8eeb75879d 100644
--- a/drivers/media/platform/ti-vpe/cal.c
+++ b/drivers/media/platform/ti-vpe/cal.c
@@ -825,15 +825,16 @@  static void csi2_phy_init(struct cal_ctx *ctx)
 
 static void csi2_wait_complexio_reset(struct cal_ctx *ctx)
 {
-	int i;
+	unsigned long timeout;
 
-	for (i = 0; i < 250; i++) {
+	timeout = jiffies + msecs_to_jiffies(750);
+	while (time_before(jiffies, timeout)) {
 		if (reg_read_field(ctx->dev,
 				   CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port),
 				   CAL_CSI2_COMPLEXIO_CFG_RESET_DONE_MASK) ==
 		    CAL_CSI2_COMPLEXIO_CFG_RESET_DONE_RESETCOMPLETED)
 			break;
-		usleep_range(1000, 1100);
+		usleep_range(500, 5000);
 	}
 
 	if (reg_read_field(ctx->dev, CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port),