Message ID | 20200326214730.2449707-4-nfraprado@protonmail.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | media: vimc: Add support for {RGB,BGR,GBR}888 bus formats on debayer source pad | expand |
On 3/26/20 3:47 PM, Nícolas F. R. A. Prado wrote: > Add support for RGB888_*, BGR888_* and GBR888_* media bus formats on > the source pad of debayer subdevices. > > Co-developed-by: Vitor Massaru Iha <vitor@massaru.org> > Signed-off-by: Vitor Massaru Iha <vitor@massaru.org> > Signed-off-by: Nícolas F. R. A. Prado <nfraprado@protonmail.com> > --- > > Changes in v2: > - Change commit message to reflect v2 changes > - Rename variables > - Fix array formatting > - Add vimc_deb_is_src_code_valid function > - Add other BGR888 and RGB888 formats to debayer source pad supported > formats > > drivers/media/platform/vimc/vimc-debayer.c | 61 +++++++++++++++++----- > 1 file changed, 49 insertions(+), 12 deletions(-) > > diff --git a/drivers/media/platform/vimc/vimc-debayer.c b/drivers/media/platform/vimc/vimc-debayer.c > index baf6bf9f65b5..33a9bea770bc 100644 > --- a/drivers/media/platform/vimc/vimc-debayer.c > +++ b/drivers/media/platform/vimc/vimc-debayer.c > @@ -51,6 +51,19 @@ static const struct v4l2_mbus_framefmt sink_fmt_default = { > .colorspace = V4L2_COLORSPACE_DEFAULT, > }; > > +static const u32 vimc_deb_src_mbus_codes[] = { > + MEDIA_BUS_FMT_GBR888_1X24, > + MEDIA_BUS_FMT_BGR888_1X24, > + MEDIA_BUS_FMT_BGR888_3X8, > + MEDIA_BUS_FMT_RGB888_1X24, > + MEDIA_BUS_FMT_RGB888_2X12_BE, > + MEDIA_BUS_FMT_RGB888_2X12_LE, > + MEDIA_BUS_FMT_RGB888_3X8, > + MEDIA_BUS_FMT_RGB888_1X7X4_SPWG, > + MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA, > + MEDIA_BUS_FMT_RGB888_1X32_PADHI, > +}; > + > static const struct vimc_deb_pix_map vimc_deb_pix_map_list[] = { > { > .code = MEDIA_BUS_FMT_SBGGR8_1X8, > @@ -125,6 +138,17 @@ static const struct vimc_deb_pix_map *vimc_deb_pix_map_by_code(u32 code) > return NULL; > } > > +static int vimc_deb_is_src_code_invalid(u32 code) > +{ > + unsigned int i; > + > + for (i = 0; i < ARRAY_SIZE(vimc_deb_src_mbus_codes); i++) > + if (vimc_deb_src_mbus_codes[i] == code) > + return 0; > + > + return -EINVAL; > +} > + > static int vimc_deb_init_cfg(struct v4l2_subdev *sd, > struct v4l2_subdev_pad_config *cfg) > { > @@ -148,14 +172,11 @@ static int vimc_deb_enum_mbus_code(struct v4l2_subdev *sd, > struct v4l2_subdev_pad_config *cfg, > struct v4l2_subdev_mbus_code_enum *code) > { > - /* We only support one format for source pads */ > if (VIMC_IS_SRC(code->pad)) { > - struct vimc_deb_device *vdeb = v4l2_get_subdevdata(sd); > - > - if (code->index) > + if (code->index >= ARRAY_SIZE(vimc_deb_src_mbus_codes)) > return -EINVAL; > > - code->code = vdeb->src_code; > + code->code = vimc_deb_src_mbus_codes[code->index]; > } else { > if (code->index >= ARRAY_SIZE(vimc_deb_pix_map_list)) > return -EINVAL; > @@ -170,8 +191,6 @@ static int vimc_deb_enum_frame_size(struct v4l2_subdev *sd, > struct v4l2_subdev_pad_config *cfg, > struct v4l2_subdev_frame_size_enum *fse) > { > - struct vimc_deb_device *vdeb = v4l2_get_subdevdata(sd); > - > if (fse->index) > return -EINVAL; > > @@ -181,7 +200,7 @@ static int vimc_deb_enum_frame_size(struct v4l2_subdev *sd, > > if (!vpix) > return -EINVAL; > - } else if (fse->code != vdeb->src_code) { > + } else if (vimc_deb_is_src_code_invalid(fse->code)) { > return -EINVAL; > } > > @@ -237,6 +256,7 @@ static int vimc_deb_set_fmt(struct v4l2_subdev *sd, > { > struct vimc_deb_device *vdeb = v4l2_get_subdevdata(sd); > struct v4l2_mbus_framefmt *sink_fmt; > + u32 *src_code; > > if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) { > /* Do not change the format while stream is on */ > @@ -244,8 +264,10 @@ static int vimc_deb_set_fmt(struct v4l2_subdev *sd, > return -EBUSY; > > sink_fmt = &vdeb->sink_fmt; > + src_code = &vdeb->src_code; > } else { > sink_fmt = v4l2_subdev_get_try_format(sd, cfg, 0); > + src_code = &v4l2_subdev_get_try_format(sd, cfg, 1)->code; > } > > /* > @@ -253,9 +275,14 @@ static int vimc_deb_set_fmt(struct v4l2_subdev *sd, > * it is propagated from the sink > */ > if (VIMC_IS_SRC(fmt->pad)) { > + u32 code = fmt->format.code; > + > fmt->format = *sink_fmt; > - /* TODO: Add support for other formats */ > - fmt->format.code = vdeb->src_code; > + > + if (!vimc_deb_is_src_code_invalid(code)) > + *src_code = code; > + > + fmt->format.code = *src_code; > } else { > /* Set the new format in the sink pad */ > vimc_deb_adjust_sink_fmt(&fmt->format); > @@ -291,11 +318,21 @@ static void vimc_deb_set_rgb_mbus_fmt_rgb888_1x24(struct vimc_deb_device *vdeb, > unsigned int col, > unsigned int rgb[3]) Change this to pass a pointer and size. > { > + const struct vimc_pix_map *vpix; > unsigned int i, index; > > + vpix = vimc_pix_map_by_code(vdeb->src_code); > index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 3); > - for (i = 0; i < 3; i++) > - vdeb->src_frame[index + i] = rgb[i]; > + for (i = 0; i < 3; i++) { > + switch (vpix->pixelformat) { > + case V4L2_PIX_FMT_RGB24: > + vdeb->src_frame[index + i] = rgb[i]; > + break; > + case V4L2_PIX_FMT_BGR24: > + vdeb->src_frame[index + i] = rgb[2-i]; > + break; > + } > + } > } > > static int vimc_deb_s_stream(struct v4l2_subdev *sd, int enable) > thanks, -- Shuah
Hello, On 3/26/20 7:06 PM, Shuah Khan wrote: > On 3/26/20 3:47 PM, Nícolas F. R. A. Prado wrote: >> Add support for RGB888_*, BGR888_* and GBR888_* media bus formats on >> the source pad of debayer subdevices. >> >> Co-developed-by: Vitor Massaru Iha <vitor@massaru.org> >> Signed-off-by: Vitor Massaru Iha <vitor@massaru.org> >> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@protonmail.com> >> --- >> >> Changes in v2: >> - Change commit message to reflect v2 changes >> - Rename variables >> - Fix array formatting >> - Add vimc_deb_is_src_code_valid function >> - Add other BGR888 and RGB888 formats to debayer source pad supported >> formats >> >> drivers/media/platform/vimc/vimc-debayer.c | 61 +++++++++++++++++----- >> 1 file changed, 49 insertions(+), 12 deletions(-) >> >> diff --git a/drivers/media/platform/vimc/vimc-debayer.c b/drivers/media/platform/vimc/vimc-debayer.c >> index baf6bf9f65b5..33a9bea770bc 100644 >> --- a/drivers/media/platform/vimc/vimc-debayer.c >> +++ b/drivers/media/platform/vimc/vimc-debayer.c >> @@ -51,6 +51,19 @@ static const struct v4l2_mbus_framefmt sink_fmt_default = { >> .colorspace = V4L2_COLORSPACE_DEFAULT, >> }; >> +static const u32 vimc_deb_src_mbus_codes[] = { >> + MEDIA_BUS_FMT_GBR888_1X24, >> + MEDIA_BUS_FMT_BGR888_1X24, >> + MEDIA_BUS_FMT_BGR888_3X8, >> + MEDIA_BUS_FMT_RGB888_1X24, >> + MEDIA_BUS_FMT_RGB888_2X12_BE, >> + MEDIA_BUS_FMT_RGB888_2X12_LE, >> + MEDIA_BUS_FMT_RGB888_3X8, >> + MEDIA_BUS_FMT_RGB888_1X7X4_SPWG, >> + MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA, >> + MEDIA_BUS_FMT_RGB888_1X32_PADHI, >> +}; >> + >> static const struct vimc_deb_pix_map vimc_deb_pix_map_list[] = { >> { >> .code = MEDIA_BUS_FMT_SBGGR8_1X8, >> @@ -125,6 +138,17 @@ static const struct vimc_deb_pix_map *vimc_deb_pix_map_by_code(u32 code) >> return NULL; >> } >> +static int vimc_deb_is_src_code_invalid(u32 code) >> +{ >> + unsigned int i; >> + >> + for (i = 0; i < ARRAY_SIZE(vimc_deb_src_mbus_codes); i++) >> + if (vimc_deb_src_mbus_codes[i] == code) >> + return 0; >> + >> + return -EINVAL; >> +} The naming is a bit confusing, since it checks if it is invalid, but returns a negative number if so. How about renaming to vimc_deb_src_code_is_valid ? >> + >> static int vimc_deb_init_cfg(struct v4l2_subdev *sd, >> struct v4l2_subdev_pad_config *cfg) >> { >> @@ -148,14 +172,11 @@ static int vimc_deb_enum_mbus_code(struct v4l2_subdev *sd, >> struct v4l2_subdev_pad_config *cfg, >> struct v4l2_subdev_mbus_code_enum *code) >> { >> - /* We only support one format for source pads */ >> if (VIMC_IS_SRC(code->pad)) { >> - struct vimc_deb_device *vdeb = v4l2_get_subdevdata(sd); >> - >> - if (code->index) >> + if (code->index >= ARRAY_SIZE(vimc_deb_src_mbus_codes)) >> return -EINVAL; >> - code->code = vdeb->src_code; >> + code->code = vimc_deb_src_mbus_codes[code->index]; >> } else { >> if (code->index >= ARRAY_SIZE(vimc_deb_pix_map_list)) >> return -EINVAL; >> @@ -170,8 +191,6 @@ static int vimc_deb_enum_frame_size(struct v4l2_subdev *sd, >> struct v4l2_subdev_pad_config *cfg, >> struct v4l2_subdev_frame_size_enum *fse) >> { >> - struct vimc_deb_device *vdeb = v4l2_get_subdevdata(sd); >> - >> if (fse->index) >> return -EINVAL; >> @@ -181,7 +200,7 @@ static int vimc_deb_enum_frame_size(struct v4l2_subdev *sd, >> if (!vpix) >> return -EINVAL; >> - } else if (fse->code != vdeb->src_code) { >> + } else if (vimc_deb_is_src_code_invalid(fse->code)) { >> return -EINVAL; >> } >> @@ -237,6 +256,7 @@ static int vimc_deb_set_fmt(struct v4l2_subdev *sd, >> { >> struct vimc_deb_device *vdeb = v4l2_get_subdevdata(sd); >> struct v4l2_mbus_framefmt *sink_fmt; >> + u32 *src_code; >> if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) { >> /* Do not change the format while stream is on */ >> @@ -244,8 +264,10 @@ static int vimc_deb_set_fmt(struct v4l2_subdev *sd, >> return -EBUSY; >> sink_fmt = &vdeb->sink_fmt; >> + src_code = &vdeb->src_code; >> } else { >> sink_fmt = v4l2_subdev_get_try_format(sd, cfg, 0); >> + src_code = &v4l2_subdev_get_try_format(sd, cfg, 1)->code; >> } >> /* >> @@ -253,9 +275,14 @@ static int vimc_deb_set_fmt(struct v4l2_subdev *sd, >> * it is propagated from the sink >> */ >> if (VIMC_IS_SRC(fmt->pad)) { >> + u32 code = fmt->format.code; >> + >> fmt->format = *sink_fmt; >> - /* TODO: Add support for other formats */ >> - fmt->format.code = vdeb->src_code; >> + >> + if (!vimc_deb_is_src_code_invalid(code)) >> + *src_code = code; >> + >> + fmt->format.code = *src_code; >> } else { >> /* Set the new format in the sink pad */ >> vimc_deb_adjust_sink_fmt(&fmt->format); >> @@ -291,11 +318,21 @@ static void vimc_deb_set_rgb_mbus_fmt_rgb888_1x24(struct vimc_deb_device *vdeb, >> unsigned int col, >> unsigned int rgb[3]) > > Change this to pass a pointer and size. Hi Shuah, Modifying vimc_deb_set_rgb_mbus_fmt_rgb888_1x24() is not part of this patch, or do you mean another part of the code? Thanks for reviewing Helen > >> { >> + const struct vimc_pix_map *vpix; >> unsigned int i, index; >> + vpix = vimc_pix_map_by_code(vdeb->src_code); >> index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 3); >> - for (i = 0; i < 3; i++) >> - vdeb->src_frame[index + i] = rgb[i]; >> + for (i = 0; i < 3; i++) { >> + switch (vpix->pixelformat) { >> + case V4L2_PIX_FMT_RGB24: >> + vdeb->src_frame[index + i] = rgb[i]; >> + break; >> + case V4L2_PIX_FMT_BGR24: >> + vdeb->src_frame[index + i] = rgb[2-i]; >> + break; >> + } >> + } >> } >> static int vimc_deb_s_stream(struct v4l2_subdev *sd, int enable) >> > > thanks, > -- Shuah
On 3/30/20 1:43 PM, Helen Koike wrote: > Hello, > > On 3/26/20 7:06 PM, Shuah Khan wrote: >> On 3/26/20 3:47 PM, Nícolas F. R. A. Prado wrote: >>> Add support for RGB888_*, BGR888_* and GBR888_* media bus formats on >>> the source pad of debayer subdevices. >>> >>> Co-developed-by: Vitor Massaru Iha <vitor@massaru.org> >>> Signed-off-by: Vitor Massaru Iha <vitor@massaru.org> >>> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@protonmail.com> >>> --- >>> >>> Changes in v2: >>> - Change commit message to reflect v2 changes >>> - Rename variables >>> - Fix array formatting >>> - Add vimc_deb_is_src_code_valid function >>> - Add other BGR888 and RGB888 formats to debayer source pad supported >>> formats >>> >>> drivers/media/platform/vimc/vimc-debayer.c | 61 +++++++++++++++++----- >>> 1 file changed, 49 insertions(+), 12 deletions(-) >>> >>> diff --git a/drivers/media/platform/vimc/vimc-debayer.c b/drivers/media/platform/vimc/vimc-debayer.c >>> index baf6bf9f65b5..33a9bea770bc 100644 >>> --- a/drivers/media/platform/vimc/vimc-debayer.c >>> +++ b/drivers/media/platform/vimc/vimc-debayer.c >>> @@ -51,6 +51,19 @@ static const struct v4l2_mbus_framefmt sink_fmt_default = { >>> .colorspace = V4L2_COLORSPACE_DEFAULT, >>> }; >>> +static const u32 vimc_deb_src_mbus_codes[] = { >>> + MEDIA_BUS_FMT_GBR888_1X24, >>> + MEDIA_BUS_FMT_BGR888_1X24, >>> + MEDIA_BUS_FMT_BGR888_3X8, >>> + MEDIA_BUS_FMT_RGB888_1X24, >>> + MEDIA_BUS_FMT_RGB888_2X12_BE, >>> + MEDIA_BUS_FMT_RGB888_2X12_LE, >>> + MEDIA_BUS_FMT_RGB888_3X8, >>> + MEDIA_BUS_FMT_RGB888_1X7X4_SPWG, >>> + MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA, >>> + MEDIA_BUS_FMT_RGB888_1X32_PADHI, >>> +}; >>> + >>> static const struct vimc_deb_pix_map vimc_deb_pix_map_list[] = { >>> { >>> .code = MEDIA_BUS_FMT_SBGGR8_1X8, >>> @@ -125,6 +138,17 @@ static const struct vimc_deb_pix_map *vimc_deb_pix_map_by_code(u32 code) >>> return NULL; >>> } >>> +static int vimc_deb_is_src_code_invalid(u32 code) >>> +{ >>> + unsigned int i; >>> + >>> + for (i = 0; i < ARRAY_SIZE(vimc_deb_src_mbus_codes); i++) >>> + if (vimc_deb_src_mbus_codes[i] == code) >>> + return 0; >>> + >>> + return -EINVAL; >>> +} > > The naming is a bit confusing, since it checks if it is invalid, but returns a negative number if so. > > How about renaming to vimc_deb_src_code_is_valid ? > >>> + >>> static int vimc_deb_init_cfg(struct v4l2_subdev *sd, >>> struct v4l2_subdev_pad_config *cfg) >>> { >>> @@ -148,14 +172,11 @@ static int vimc_deb_enum_mbus_code(struct v4l2_subdev *sd, >>> struct v4l2_subdev_pad_config *cfg, >>> struct v4l2_subdev_mbus_code_enum *code) >>> { >>> - /* We only support one format for source pads */ >>> if (VIMC_IS_SRC(code->pad)) { >>> - struct vimc_deb_device *vdeb = v4l2_get_subdevdata(sd); >>> - >>> - if (code->index) >>> + if (code->index >= ARRAY_SIZE(vimc_deb_src_mbus_codes)) >>> return -EINVAL; >>> - code->code = vdeb->src_code; >>> + code->code = vimc_deb_src_mbus_codes[code->index]; >>> } else { >>> if (code->index >= ARRAY_SIZE(vimc_deb_pix_map_list)) >>> return -EINVAL; >>> @@ -170,8 +191,6 @@ static int vimc_deb_enum_frame_size(struct v4l2_subdev *sd, >>> struct v4l2_subdev_pad_config *cfg, >>> struct v4l2_subdev_frame_size_enum *fse) >>> { >>> - struct vimc_deb_device *vdeb = v4l2_get_subdevdata(sd); >>> - >>> if (fse->index) >>> return -EINVAL; >>> @@ -181,7 +200,7 @@ static int vimc_deb_enum_frame_size(struct v4l2_subdev *sd, >>> if (!vpix) >>> return -EINVAL; >>> - } else if (fse->code != vdeb->src_code) { >>> + } else if (vimc_deb_is_src_code_invalid(fse->code)) { >>> return -EINVAL; >>> } >>> @@ -237,6 +256,7 @@ static int vimc_deb_set_fmt(struct v4l2_subdev *sd, >>> { >>> struct vimc_deb_device *vdeb = v4l2_get_subdevdata(sd); >>> struct v4l2_mbus_framefmt *sink_fmt; >>> + u32 *src_code; >>> if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) { >>> /* Do not change the format while stream is on */ >>> @@ -244,8 +264,10 @@ static int vimc_deb_set_fmt(struct v4l2_subdev *sd, >>> return -EBUSY; >>> sink_fmt = &vdeb->sink_fmt; >>> + src_code = &vdeb->src_code; >>> } else { >>> sink_fmt = v4l2_subdev_get_try_format(sd, cfg, 0); >>> + src_code = &v4l2_subdev_get_try_format(sd, cfg, 1)->code; >>> } >>> /* >>> @@ -253,9 +275,14 @@ static int vimc_deb_set_fmt(struct v4l2_subdev *sd, >>> * it is propagated from the sink >>> */ >>> if (VIMC_IS_SRC(fmt->pad)) { >>> + u32 code = fmt->format.code; >>> + >>> fmt->format = *sink_fmt; >>> - /* TODO: Add support for other formats */ >>> - fmt->format.code = vdeb->src_code; >>> + >>> + if (!vimc_deb_is_src_code_invalid(code)) >>> + *src_code = code; >>> + >>> + fmt->format.code = *src_code; >>> } else { >>> /* Set the new format in the sink pad */ >>> vimc_deb_adjust_sink_fmt(&fmt->format); >>> @@ -291,11 +318,21 @@ static void vimc_deb_set_rgb_mbus_fmt_rgb888_1x24(struct vimc_deb_device *vdeb, >>> unsigned int col, >>> unsigned int rgb[3]) >> >> Change this to pass a pointer and size. > > Hi Shuah, > > Modifying vimc_deb_set_rgb_mbus_fmt_rgb888_1x24() is not part of this patch, or do you mean another part of the code? > I know it isn't part of this patch. However, this could use improvment and pass pointer and size. Can be handled as a separate patch. thanks, -- Shuah
Hi Helen, thanks for the review. Some comments below. On Mon, Mar 30, 2020 at 04:43:53PM -0300, Helen Koike wrote: > > Hello, > > On 3/26/20 7:06 PM, Shuah Khan wrote: > > On 3/26/20 3:47 PM, Nícolas F. R. A. Prado wrote: > >> Add support for RGB888_*, BGR888_* and GBR888_* media bus formats on > >> the source pad of debayer subdevices. > >> > >> Co-developed-by: Vitor Massaru Iha <vitor@massaru.org> > >> Signed-off-by: Vitor Massaru Iha <vitor@massaru.org> > >> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@protonmail.com> > >> --- > >> > >> Changes in v2: > >> - Change commit message to reflect v2 changes > >> - Rename variables > >> - Fix array formatting > >> - Add vimc_deb_is_src_code_valid function > >> - Add other BGR888 and RGB888 formats to debayer source pad supported > >> formats > >> > >> drivers/media/platform/vimc/vimc-debayer.c | 61 +++++++++++++++++----- > >> 1 file changed, 49 insertions(+), 12 deletions(-) > >> > >> diff --git a/drivers/media/platform/vimc/vimc-debayer.c b/drivers/media/platform/vimc/vimc-debayer.c > >> index baf6bf9f65b5..33a9bea770bc 100644 > >> --- a/drivers/media/platform/vimc/vimc-debayer.c > >> +++ b/drivers/media/platform/vimc/vimc-debayer.c > >> @@ -51,6 +51,19 @@ static const struct v4l2_mbus_framefmt sink_fmt_default = { > >> .colorspace = V4L2_COLORSPACE_DEFAULT, > >> }; > >> +static const u32 vimc_deb_src_mbus_codes[] = { > >> + MEDIA_BUS_FMT_GBR888_1X24, > >> + MEDIA_BUS_FMT_BGR888_1X24, > >> + MEDIA_BUS_FMT_BGR888_3X8, > >> + MEDIA_BUS_FMT_RGB888_1X24, > >> + MEDIA_BUS_FMT_RGB888_2X12_BE, > >> + MEDIA_BUS_FMT_RGB888_2X12_LE, > >> + MEDIA_BUS_FMT_RGB888_3X8, > >> + MEDIA_BUS_FMT_RGB888_1X7X4_SPWG, > >> + MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA, > >> + MEDIA_BUS_FMT_RGB888_1X32_PADHI, > >> +}; > >> + > >> static const struct vimc_deb_pix_map vimc_deb_pix_map_list[] = { > >> { > >> .code = MEDIA_BUS_FMT_SBGGR8_1X8, > >> @@ -125,6 +138,17 @@ static const struct vimc_deb_pix_map *vimc_deb_pix_map_by_code(u32 code) > >> return NULL; > >> } > >> +static int vimc_deb_is_src_code_invalid(u32 code) > >> +{ > >> + unsigned int i; > >> + > >> + for (i = 0; i < ARRAY_SIZE(vimc_deb_src_mbus_codes); i++) > >> + if (vimc_deb_src_mbus_codes[i] == code) > >> + return 0; > >> + > >> + return -EINVAL; > >> +} > > The naming is a bit confusing, since it checks if it is invalid, but returns a negative number if so. > > How about renaming to vimc_deb_src_code_is_valid ? I also don't like that the function is called 'is_invalid', but I gave it that name because I think it actually is less confusing when calling. For example, later in this patch I do: } else if (vimc_deb_is_src_code_invalid(fse->code)) { return -EINVAL; Which to me becomes very clear. Since the error values evaluate to True, the other alternative that I see is to call it 'is_valid', but return 0 when invalid and 1 when valid. But then we no longer return the -EINVAL value, which I think makes the function less clear. What do you think? Thank you, Nícolas > > >> + > >> static int vimc_deb_init_cfg(struct v4l2_subdev *sd, > >> struct v4l2_subdev_pad_config *cfg) > >> { > >> @@ -148,14 +172,11 @@ static int vimc_deb_enum_mbus_code(struct v4l2_subdev *sd, > >> struct v4l2_subdev_pad_config *cfg, > >> struct v4l2_subdev_mbus_code_enum *code) > >> { > >> - /* We only support one format for source pads */ > >> if (VIMC_IS_SRC(code->pad)) { > >> - struct vimc_deb_device *vdeb = v4l2_get_subdevdata(sd); > >> - > >> - if (code->index) > >> + if (code->index >= ARRAY_SIZE(vimc_deb_src_mbus_codes)) > >> return -EINVAL; > >> - code->code = vdeb->src_code; > >> + code->code = vimc_deb_src_mbus_codes[code->index]; > >> } else { > >> if (code->index >= ARRAY_SIZE(vimc_deb_pix_map_list)) > >> return -EINVAL; > >> @@ -170,8 +191,6 @@ static int vimc_deb_enum_frame_size(struct v4l2_subdev *sd, > >> struct v4l2_subdev_pad_config *cfg, > >> struct v4l2_subdev_frame_size_enum *fse) > >> { > >> - struct vimc_deb_device *vdeb = v4l2_get_subdevdata(sd); > >> - > >> if (fse->index) > >> return -EINVAL; > >> @@ -181,7 +200,7 @@ static int vimc_deb_enum_frame_size(struct v4l2_subdev *sd, > >> if (!vpix) > >> return -EINVAL; > >> - } else if (fse->code != vdeb->src_code) { > >> + } else if (vimc_deb_is_src_code_invalid(fse->code)) { > >> return -EINVAL; > >> } > >> @@ -237,6 +256,7 @@ static int vimc_deb_set_fmt(struct v4l2_subdev *sd, > >> { > >> struct vimc_deb_device *vdeb = v4l2_get_subdevdata(sd); > >> struct v4l2_mbus_framefmt *sink_fmt; > >> + u32 *src_code; > >> if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) { > >> /* Do not change the format while stream is on */ > >> @@ -244,8 +264,10 @@ static int vimc_deb_set_fmt(struct v4l2_subdev *sd, > >> return -EBUSY; > >> sink_fmt = &vdeb->sink_fmt; > >> + src_code = &vdeb->src_code; > >> } else { > >> sink_fmt = v4l2_subdev_get_try_format(sd, cfg, 0); > >> + src_code = &v4l2_subdev_get_try_format(sd, cfg, 1)->code; > >> } > >> /* > >> @@ -253,9 +275,14 @@ static int vimc_deb_set_fmt(struct v4l2_subdev *sd, > >> * it is propagated from the sink > >> */ > >> if (VIMC_IS_SRC(fmt->pad)) { > >> + u32 code = fmt->format.code; > >> + > >> fmt->format = *sink_fmt; > >> - /* TODO: Add support for other formats */ > >> - fmt->format.code = vdeb->src_code; > >> + > >> + if (!vimc_deb_is_src_code_invalid(code)) > >> + *src_code = code; > >> + > >> + fmt->format.code = *src_code; > >> } else { > >> /* Set the new format in the sink pad */ > >> vimc_deb_adjust_sink_fmt(&fmt->format); > >> @@ -291,11 +318,21 @@ static void vimc_deb_set_rgb_mbus_fmt_rgb888_1x24(struct vimc_deb_device *vdeb, > >> unsigned int col, > >> unsigned int rgb[3]) > > > > Change this to pass a pointer and size. > > Hi Shuah, > > Modifying vimc_deb_set_rgb_mbus_fmt_rgb888_1x24() is not part of this patch, or do you mean another part of the code? > > Thanks for reviewing > Helen > > > > >> { > >> + const struct vimc_pix_map *vpix; > >> unsigned int i, index; > >> + vpix = vimc_pix_map_by_code(vdeb->src_code); > >> index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 3); > >> - for (i = 0; i < 3; i++) > >> - vdeb->src_frame[index + i] = rgb[i]; > >> + for (i = 0; i < 3; i++) { > >> + switch (vpix->pixelformat) { > >> + case V4L2_PIX_FMT_RGB24: > >> + vdeb->src_frame[index + i] = rgb[i]; > >> + break; > >> + case V4L2_PIX_FMT_BGR24: > >> + vdeb->src_frame[index + i] = rgb[2-i]; > >> + break; > >> + } > >> + } > >> } > >> static int vimc_deb_s_stream(struct v4l2_subdev *sd, int enable) > >> > > > > thanks, > > -- Shuah
On 4/20/20 6:01 PM, Nícolas F. R. A. Prado wrote: > Hi Helen, > > thanks for the review. > > Some comments below. > > On Mon, Mar 30, 2020 at 04:43:53PM -0300, Helen Koike wrote: >> >> Hello, >> >> On 3/26/20 7:06 PM, Shuah Khan wrote: >>> On 3/26/20 3:47 PM, Nícolas F. R. A. Prado wrote: >>>> Add support for RGB888_*, BGR888_* and GBR888_* media bus formats on >>>> the source pad of debayer subdevices. >>>> >>>> Co-developed-by: Vitor Massaru Iha <vitor@massaru.org> >>>> Signed-off-by: Vitor Massaru Iha <vitor@massaru.org> >>>> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@protonmail.com> >>>> --- >>>> >>>> Changes in v2: >>>> - Change commit message to reflect v2 changes >>>> - Rename variables >>>> - Fix array formatting >>>> - Add vimc_deb_is_src_code_valid function >>>> - Add other BGR888 and RGB888 formats to debayer source pad supported >>>> formats >>>> >>>> drivers/media/platform/vimc/vimc-debayer.c | 61 +++++++++++++++++----- >>>> 1 file changed, 49 insertions(+), 12 deletions(-) >>>> >>>> diff --git a/drivers/media/platform/vimc/vimc-debayer.c b/drivers/media/platform/vimc/vimc-debayer.c >>>> index baf6bf9f65b5..33a9bea770bc 100644 >>>> --- a/drivers/media/platform/vimc/vimc-debayer.c >>>> +++ b/drivers/media/platform/vimc/vimc-debayer.c >>>> @@ -51,6 +51,19 @@ static const struct v4l2_mbus_framefmt sink_fmt_default = { >>>> .colorspace = V4L2_COLORSPACE_DEFAULT, >>>> }; >>>> +static const u32 vimc_deb_src_mbus_codes[] = { >>>> + MEDIA_BUS_FMT_GBR888_1X24, >>>> + MEDIA_BUS_FMT_BGR888_1X24, >>>> + MEDIA_BUS_FMT_BGR888_3X8, >>>> + MEDIA_BUS_FMT_RGB888_1X24, >>>> + MEDIA_BUS_FMT_RGB888_2X12_BE, >>>> + MEDIA_BUS_FMT_RGB888_2X12_LE, >>>> + MEDIA_BUS_FMT_RGB888_3X8, >>>> + MEDIA_BUS_FMT_RGB888_1X7X4_SPWG, >>>> + MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA, >>>> + MEDIA_BUS_FMT_RGB888_1X32_PADHI, >>>> +}; >>>> + >>>> static const struct vimc_deb_pix_map vimc_deb_pix_map_list[] = { >>>> { >>>> .code = MEDIA_BUS_FMT_SBGGR8_1X8, >>>> @@ -125,6 +138,17 @@ static const struct vimc_deb_pix_map *vimc_deb_pix_map_by_code(u32 code) >>>> return NULL; >>>> } >>>> +static int vimc_deb_is_src_code_invalid(u32 code) >>>> +{ >>>> + unsigned int i; >>>> + >>>> + for (i = 0; i < ARRAY_SIZE(vimc_deb_src_mbus_codes); i++) >>>> + if (vimc_deb_src_mbus_codes[i] == code) >>>> + return 0; >>>> + >>>> + return -EINVAL; >>>> +} >> >> The naming is a bit confusing, since it checks if it is invalid, but returns a negative number if so. >> >> How about renaming to vimc_deb_src_code_is_valid ? > > I also don't like that the function is called 'is_invalid', but I gave it that > name because I think it actually is less confusing when calling. > For example, later in this patch I do: > > } else if (vimc_deb_is_src_code_invalid(fse->code)) { > return -EINVAL; > > Which to me becomes very clear. > > Since the error values evaluate to True, the other alternative that I > see is to call it 'is_valid', but return 0 when invalid and 1 when valid. > But then we no longer return the -EINVAL value, which I think makes the function > less clear. > > What do you think? How about make the function to return bool instead of int? Regards, Helen > > Thank you, > Nícolas > >> >>>> + >>>> static int vimc_deb_init_cfg(struct v4l2_subdev *sd, >>>> struct v4l2_subdev_pad_config *cfg) >>>> { >>>> @@ -148,14 +172,11 @@ static int vimc_deb_enum_mbus_code(struct v4l2_subdev *sd, >>>> struct v4l2_subdev_pad_config *cfg, >>>> struct v4l2_subdev_mbus_code_enum *code) >>>> { >>>> - /* We only support one format for source pads */ >>>> if (VIMC_IS_SRC(code->pad)) { >>>> - struct vimc_deb_device *vdeb = v4l2_get_subdevdata(sd); >>>> - >>>> - if (code->index) >>>> + if (code->index >= ARRAY_SIZE(vimc_deb_src_mbus_codes)) >>>> return -EINVAL; >>>> - code->code = vdeb->src_code; >>>> + code->code = vimc_deb_src_mbus_codes[code->index]; >>>> } else { >>>> if (code->index >= ARRAY_SIZE(vimc_deb_pix_map_list)) >>>> return -EINVAL; >>>> @@ -170,8 +191,6 @@ static int vimc_deb_enum_frame_size(struct v4l2_subdev *sd, >>>> struct v4l2_subdev_pad_config *cfg, >>>> struct v4l2_subdev_frame_size_enum *fse) >>>> { >>>> - struct vimc_deb_device *vdeb = v4l2_get_subdevdata(sd); >>>> - >>>> if (fse->index) >>>> return -EINVAL; >>>> @@ -181,7 +200,7 @@ static int vimc_deb_enum_frame_size(struct v4l2_subdev *sd, >>>> if (!vpix) >>>> return -EINVAL; >>>> - } else if (fse->code != vdeb->src_code) { >>>> + } else if (vimc_deb_is_src_code_invalid(fse->code)) { >>>> return -EINVAL; >>>> } >>>> @@ -237,6 +256,7 @@ static int vimc_deb_set_fmt(struct v4l2_subdev *sd, >>>> { >>>> struct vimc_deb_device *vdeb = v4l2_get_subdevdata(sd); >>>> struct v4l2_mbus_framefmt *sink_fmt; >>>> + u32 *src_code; >>>> if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) { >>>> /* Do not change the format while stream is on */ >>>> @@ -244,8 +264,10 @@ static int vimc_deb_set_fmt(struct v4l2_subdev *sd, >>>> return -EBUSY; >>>> sink_fmt = &vdeb->sink_fmt; >>>> + src_code = &vdeb->src_code; >>>> } else { >>>> sink_fmt = v4l2_subdev_get_try_format(sd, cfg, 0); >>>> + src_code = &v4l2_subdev_get_try_format(sd, cfg, 1)->code; >>>> } >>>> /* >>>> @@ -253,9 +275,14 @@ static int vimc_deb_set_fmt(struct v4l2_subdev *sd, >>>> * it is propagated from the sink >>>> */ >>>> if (VIMC_IS_SRC(fmt->pad)) { >>>> + u32 code = fmt->format.code; >>>> + >>>> fmt->format = *sink_fmt; >>>> - /* TODO: Add support for other formats */ >>>> - fmt->format.code = vdeb->src_code; >>>> + >>>> + if (!vimc_deb_is_src_code_invalid(code)) >>>> + *src_code = code; >>>> + >>>> + fmt->format.code = *src_code; >>>> } else { >>>> /* Set the new format in the sink pad */ >>>> vimc_deb_adjust_sink_fmt(&fmt->format); >>>> @@ -291,11 +318,21 @@ static void vimc_deb_set_rgb_mbus_fmt_rgb888_1x24(struct vimc_deb_device *vdeb, >>>> unsigned int col, >>>> unsigned int rgb[3]) >>> >>> Change this to pass a pointer and size. >> >> Hi Shuah, >> >> Modifying vimc_deb_set_rgb_mbus_fmt_rgb888_1x24() is not part of this patch, or do you mean another part of the code? >> >> Thanks for reviewing >> Helen >> >>> >>>> { >>>> + const struct vimc_pix_map *vpix; >>>> unsigned int i, index; >>>> + vpix = vimc_pix_map_by_code(vdeb->src_code); >>>> index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 3); >>>> - for (i = 0; i < 3; i++) >>>> - vdeb->src_frame[index + i] = rgb[i]; >>>> + for (i = 0; i < 3; i++) { >>>> + switch (vpix->pixelformat) { >>>> + case V4L2_PIX_FMT_RGB24: >>>> + vdeb->src_frame[index + i] = rgb[i]; >>>> + break; >>>> + case V4L2_PIX_FMT_BGR24: >>>> + vdeb->src_frame[index + i] = rgb[2-i]; >>>> + break; >>>> + } >>>> + } >>>> } >>>> static int vimc_deb_s_stream(struct v4l2_subdev *sd, int enable) >>>> >>> >>> thanks, >>> -- Shuah >
On Mon, Apr 20, 2020 at 06:04:25PM -0300, Helen Koike wrote: > > > > On 4/20/20 6:01 PM, Nícolas F. R. A. Prado wrote: > > Hi Helen, > > > > thanks for the review. > > > > Some comments below. > > > > On Mon, Mar 30, 2020 at 04:43:53PM -0300, Helen Koike wrote: > >> > >> Hello, > >> > >> On 3/26/20 7:06 PM, Shuah Khan wrote: > >>> On 3/26/20 3:47 PM, Nícolas F. R. A. Prado wrote: > >>>> Add support for RGB888_*, BGR888_* and GBR888_* media bus formats on > >>>> the source pad of debayer subdevices. > >>>> > >>>> Co-developed-by: Vitor Massaru Iha <vitor@massaru.org> > >>>> Signed-off-by: Vitor Massaru Iha <vitor@massaru.org> > >>>> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@protonmail.com> > >>>> --- > >>>> > >>>> Changes in v2: > >>>> - Change commit message to reflect v2 changes > >>>> - Rename variables > >>>> - Fix array formatting > >>>> - Add vimc_deb_is_src_code_valid function > >>>> - Add other BGR888 and RGB888 formats to debayer source pad supported > >>>> formats > >>>> > >>>> drivers/media/platform/vimc/vimc-debayer.c | 61 +++++++++++++++++----- > >>>> 1 file changed, 49 insertions(+), 12 deletions(-) > >>>> > >>>> diff --git a/drivers/media/platform/vimc/vimc-debayer.c b/drivers/media/platform/vimc/vimc-debayer.c > >>>> index baf6bf9f65b5..33a9bea770bc 100644 > >>>> --- a/drivers/media/platform/vimc/vimc-debayer.c > >>>> +++ b/drivers/media/platform/vimc/vimc-debayer.c > >>>> @@ -51,6 +51,19 @@ static const struct v4l2_mbus_framefmt sink_fmt_default = { > >>>> .colorspace = V4L2_COLORSPACE_DEFAULT, > >>>> }; > >>>> +static const u32 vimc_deb_src_mbus_codes[] = { > >>>> + MEDIA_BUS_FMT_GBR888_1X24, > >>>> + MEDIA_BUS_FMT_BGR888_1X24, > >>>> + MEDIA_BUS_FMT_BGR888_3X8, > >>>> + MEDIA_BUS_FMT_RGB888_1X24, > >>>> + MEDIA_BUS_FMT_RGB888_2X12_BE, > >>>> + MEDIA_BUS_FMT_RGB888_2X12_LE, > >>>> + MEDIA_BUS_FMT_RGB888_3X8, > >>>> + MEDIA_BUS_FMT_RGB888_1X7X4_SPWG, > >>>> + MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA, > >>>> + MEDIA_BUS_FMT_RGB888_1X32_PADHI, > >>>> +}; > >>>> + > >>>> static const struct vimc_deb_pix_map vimc_deb_pix_map_list[] = { > >>>> { > >>>> .code = MEDIA_BUS_FMT_SBGGR8_1X8, > >>>> @@ -125,6 +138,17 @@ static const struct vimc_deb_pix_map *vimc_deb_pix_map_by_code(u32 code) > >>>> return NULL; > >>>> } > >>>> +static int vimc_deb_is_src_code_invalid(u32 code) > >>>> +{ > >>>> + unsigned int i; > >>>> + > >>>> + for (i = 0; i < ARRAY_SIZE(vimc_deb_src_mbus_codes); i++) > >>>> + if (vimc_deb_src_mbus_codes[i] == code) > >>>> + return 0; > >>>> + > >>>> + return -EINVAL; > >>>> +} > >> > >> The naming is a bit confusing, since it checks if it is invalid, but returns a negative number if so. > >> > >> How about renaming to vimc_deb_src_code_is_valid ? > > > > I also don't like that the function is called 'is_invalid', but I gave it that > > name because I think it actually is less confusing when calling. > > For example, later in this patch I do: > > > > } else if (vimc_deb_is_src_code_invalid(fse->code)) { > > return -EINVAL; > > > > Which to me becomes very clear. > > > > Since the error values evaluate to True, the other alternative that I > > see is to call it 'is_valid', but return 0 when invalid and 1 when valid. > > But then we no longer return the -EINVAL value, which I think makes the function > > less clear. > > > > What do you think? > > How about make the function to return bool instead of int? Oh that's better, I didn't realize there was a bool type. I'll send a v3 using bool then. Thank you, Nícolas > > Regards, > Helen > > > > > Thank you, > > Nícolas > > > >> > >>>> + > >>>> static int vimc_deb_init_cfg(struct v4l2_subdev *sd, > >>>> struct v4l2_subdev_pad_config *cfg) > >>>> { > >>>> @@ -148,14 +172,11 @@ static int vimc_deb_enum_mbus_code(struct v4l2_subdev *sd, > >>>> struct v4l2_subdev_pad_config *cfg, > >>>> struct v4l2_subdev_mbus_code_enum *code) > >>>> { > >>>> - /* We only support one format for source pads */ > >>>> if (VIMC_IS_SRC(code->pad)) { > >>>> - struct vimc_deb_device *vdeb = v4l2_get_subdevdata(sd); > >>>> - > >>>> - if (code->index) > >>>> + if (code->index >= ARRAY_SIZE(vimc_deb_src_mbus_codes)) > >>>> return -EINVAL; > >>>> - code->code = vdeb->src_code; > >>>> + code->code = vimc_deb_src_mbus_codes[code->index]; > >>>> } else { > >>>> if (code->index >= ARRAY_SIZE(vimc_deb_pix_map_list)) > >>>> return -EINVAL; > >>>> @@ -170,8 +191,6 @@ static int vimc_deb_enum_frame_size(struct v4l2_subdev *sd, > >>>> struct v4l2_subdev_pad_config *cfg, > >>>> struct v4l2_subdev_frame_size_enum *fse) > >>>> { > >>>> - struct vimc_deb_device *vdeb = v4l2_get_subdevdata(sd); > >>>> - > >>>> if (fse->index) > >>>> return -EINVAL; > >>>> @@ -181,7 +200,7 @@ static int vimc_deb_enum_frame_size(struct v4l2_subdev *sd, > >>>> if (!vpix) > >>>> return -EINVAL; > >>>> - } else if (fse->code != vdeb->src_code) { > >>>> + } else if (vimc_deb_is_src_code_invalid(fse->code)) { > >>>> return -EINVAL; > >>>> } > >>>> @@ -237,6 +256,7 @@ static int vimc_deb_set_fmt(struct v4l2_subdev *sd, > >>>> { > >>>> struct vimc_deb_device *vdeb = v4l2_get_subdevdata(sd); > >>>> struct v4l2_mbus_framefmt *sink_fmt; > >>>> + u32 *src_code; > >>>> if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) { > >>>> /* Do not change the format while stream is on */ > >>>> @@ -244,8 +264,10 @@ static int vimc_deb_set_fmt(struct v4l2_subdev *sd, > >>>> return -EBUSY; > >>>> sink_fmt = &vdeb->sink_fmt; > >>>> + src_code = &vdeb->src_code; > >>>> } else { > >>>> sink_fmt = v4l2_subdev_get_try_format(sd, cfg, 0); > >>>> + src_code = &v4l2_subdev_get_try_format(sd, cfg, 1)->code; > >>>> } > >>>> /* > >>>> @@ -253,9 +275,14 @@ static int vimc_deb_set_fmt(struct v4l2_subdev *sd, > >>>> * it is propagated from the sink > >>>> */ > >>>> if (VIMC_IS_SRC(fmt->pad)) { > >>>> + u32 code = fmt->format.code; > >>>> + > >>>> fmt->format = *sink_fmt; > >>>> - /* TODO: Add support for other formats */ > >>>> - fmt->format.code = vdeb->src_code; > >>>> + > >>>> + if (!vimc_deb_is_src_code_invalid(code)) > >>>> + *src_code = code; > >>>> + > >>>> + fmt->format.code = *src_code; > >>>> } else { > >>>> /* Set the new format in the sink pad */ > >>>> vimc_deb_adjust_sink_fmt(&fmt->format); > >>>> @@ -291,11 +318,21 @@ static void vimc_deb_set_rgb_mbus_fmt_rgb888_1x24(struct vimc_deb_device *vdeb, > >>>> unsigned int col, > >>>> unsigned int rgb[3]) > >>> > >>> Change this to pass a pointer and size. > >> > >> Hi Shuah, > >> > >> Modifying vimc_deb_set_rgb_mbus_fmt_rgb888_1x24() is not part of this patch, or do you mean another part of the code? > >> > >> Thanks for reviewing > >> Helen > >> > >>> > >>>> { > >>>> + const struct vimc_pix_map *vpix; > >>>> unsigned int i, index; > >>>> + vpix = vimc_pix_map_by_code(vdeb->src_code); > >>>> index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 3); > >>>> - for (i = 0; i < 3; i++) > >>>> - vdeb->src_frame[index + i] = rgb[i]; > >>>> + for (i = 0; i < 3; i++) { > >>>> + switch (vpix->pixelformat) { > >>>> + case V4L2_PIX_FMT_RGB24: > >>>> + vdeb->src_frame[index + i] = rgb[i]; > >>>> + break; > >>>> + case V4L2_PIX_FMT_BGR24: > >>>> + vdeb->src_frame[index + i] = rgb[2-i]; > >>>> + break; > >>>> + } > >>>> + } > >>>> } > >>>> static int vimc_deb_s_stream(struct v4l2_subdev *sd, int enable) > >>>> > >>> > >>> thanks, > >>> -- Shuah > >
diff --git a/drivers/media/platform/vimc/vimc-debayer.c b/drivers/media/platform/vimc/vimc-debayer.c index baf6bf9f65b5..33a9bea770bc 100644 --- a/drivers/media/platform/vimc/vimc-debayer.c +++ b/drivers/media/platform/vimc/vimc-debayer.c @@ -51,6 +51,19 @@ static const struct v4l2_mbus_framefmt sink_fmt_default = { .colorspace = V4L2_COLORSPACE_DEFAULT, }; +static const u32 vimc_deb_src_mbus_codes[] = { + MEDIA_BUS_FMT_GBR888_1X24, + MEDIA_BUS_FMT_BGR888_1X24, + MEDIA_BUS_FMT_BGR888_3X8, + MEDIA_BUS_FMT_RGB888_1X24, + MEDIA_BUS_FMT_RGB888_2X12_BE, + MEDIA_BUS_FMT_RGB888_2X12_LE, + MEDIA_BUS_FMT_RGB888_3X8, + MEDIA_BUS_FMT_RGB888_1X7X4_SPWG, + MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA, + MEDIA_BUS_FMT_RGB888_1X32_PADHI, +}; + static const struct vimc_deb_pix_map vimc_deb_pix_map_list[] = { { .code = MEDIA_BUS_FMT_SBGGR8_1X8, @@ -125,6 +138,17 @@ static const struct vimc_deb_pix_map *vimc_deb_pix_map_by_code(u32 code) return NULL; } +static int vimc_deb_is_src_code_invalid(u32 code) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(vimc_deb_src_mbus_codes); i++) + if (vimc_deb_src_mbus_codes[i] == code) + return 0; + + return -EINVAL; +} + static int vimc_deb_init_cfg(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg) { @@ -148,14 +172,11 @@ static int vimc_deb_enum_mbus_code(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg, struct v4l2_subdev_mbus_code_enum *code) { - /* We only support one format for source pads */ if (VIMC_IS_SRC(code->pad)) { - struct vimc_deb_device *vdeb = v4l2_get_subdevdata(sd); - - if (code->index) + if (code->index >= ARRAY_SIZE(vimc_deb_src_mbus_codes)) return -EINVAL; - code->code = vdeb->src_code; + code->code = vimc_deb_src_mbus_codes[code->index]; } else { if (code->index >= ARRAY_SIZE(vimc_deb_pix_map_list)) return -EINVAL; @@ -170,8 +191,6 @@ static int vimc_deb_enum_frame_size(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg, struct v4l2_subdev_frame_size_enum *fse) { - struct vimc_deb_device *vdeb = v4l2_get_subdevdata(sd); - if (fse->index) return -EINVAL; @@ -181,7 +200,7 @@ static int vimc_deb_enum_frame_size(struct v4l2_subdev *sd, if (!vpix) return -EINVAL; - } else if (fse->code != vdeb->src_code) { + } else if (vimc_deb_is_src_code_invalid(fse->code)) { return -EINVAL; } @@ -237,6 +256,7 @@ static int vimc_deb_set_fmt(struct v4l2_subdev *sd, { struct vimc_deb_device *vdeb = v4l2_get_subdevdata(sd); struct v4l2_mbus_framefmt *sink_fmt; + u32 *src_code; if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) { /* Do not change the format while stream is on */ @@ -244,8 +264,10 @@ static int vimc_deb_set_fmt(struct v4l2_subdev *sd, return -EBUSY; sink_fmt = &vdeb->sink_fmt; + src_code = &vdeb->src_code; } else { sink_fmt = v4l2_subdev_get_try_format(sd, cfg, 0); + src_code = &v4l2_subdev_get_try_format(sd, cfg, 1)->code; } /* @@ -253,9 +275,14 @@ static int vimc_deb_set_fmt(struct v4l2_subdev *sd, * it is propagated from the sink */ if (VIMC_IS_SRC(fmt->pad)) { + u32 code = fmt->format.code; + fmt->format = *sink_fmt; - /* TODO: Add support for other formats */ - fmt->format.code = vdeb->src_code; + + if (!vimc_deb_is_src_code_invalid(code)) + *src_code = code; + + fmt->format.code = *src_code; } else { /* Set the new format in the sink pad */ vimc_deb_adjust_sink_fmt(&fmt->format); @@ -291,11 +318,21 @@ static void vimc_deb_set_rgb_mbus_fmt_rgb888_1x24(struct vimc_deb_device *vdeb, unsigned int col, unsigned int rgb[3]) { + const struct vimc_pix_map *vpix; unsigned int i, index; + vpix = vimc_pix_map_by_code(vdeb->src_code); index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 3); - for (i = 0; i < 3; i++) - vdeb->src_frame[index + i] = rgb[i]; + for (i = 0; i < 3; i++) { + switch (vpix->pixelformat) { + case V4L2_PIX_FMT_RGB24: + vdeb->src_frame[index + i] = rgb[i]; + break; + case V4L2_PIX_FMT_BGR24: + vdeb->src_frame[index + i] = rgb[2-i]; + break; + } + } } static int vimc_deb_s_stream(struct v4l2_subdev *sd, int enable)