From patchwork Tue Apr 7 15:21:56 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jacopo Mondi X-Patchwork-Id: 11478279 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 769DA81 for ; Tue, 7 Apr 2020 15:19:12 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 4BFF920753 for ; Tue, 7 Apr 2020 15:19:12 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729396AbgDGPTL (ORCPT ); Tue, 7 Apr 2020 11:19:11 -0400 Received: from relay9-d.mail.gandi.net ([217.70.183.199]:59577 "EHLO relay9-d.mail.gandi.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729159AbgDGPTL (ORCPT ); Tue, 7 Apr 2020 11:19:11 -0400 X-Originating-IP: 2.224.242.101 Received: from localhost.localdomain (2-224-242-101.ip172.fastwebnet.it [2.224.242.101]) (Authenticated sender: jacopo@jmondi.org) by relay9-d.mail.gandi.net (Postfix) with ESMTPSA id 0B5CDFF807; Tue, 7 Apr 2020 15:19:07 +0000 (UTC) From: Jacopo Mondi To: linux-media@vger.kernel.org, libcamera-devel@lists.libcamera.org Cc: Jacopo Mondi , mchehab@kernel.org, hverkuil-cisco@xs4all.nl, sakari.ailus@linux.intel.com, andrey.konovalov@linaro.org, laurent.pinchart@ideasonboard.com Subject: [PATCH v3 2/3] Documentation: media: Document read-only subdevice Date: Tue, 7 Apr 2020 17:21:56 +0200 Message-Id: <20200407152157.1686474-3-jacopo@jmondi.org> X-Mailer: git-send-email 2.26.0 In-Reply-To: <20200407152157.1686474-1-jacopo@jmondi.org> References: <20200407152157.1686474-1-jacopo@jmondi.org> MIME-Version: 1.0 Sender: linux-media-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org Document a new kAPI function to register subdev device nodes in read only mode and for each affected ioctl report how access is restricted. Acked-by: Sakari Ailus Signed-off-by: Jacopo Mondi --- Documentation/media/kapi/v4l2-subdev.rst | 44 +++++++++++++++++++ Documentation/media/uapi/v4l/dev-subdev.rst | 5 +++ .../media/uapi/v4l/vidioc-g-dv-timings.rst | 6 +++ Documentation/media/uapi/v4l/vidioc-g-std.rst | 6 +++ .../media/uapi/v4l/vidioc-subdev-g-crop.rst | 9 ++++ .../media/uapi/v4l/vidioc-subdev-g-fmt.rst | 8 ++++ .../v4l/vidioc-subdev-g-frame-interval.rst | 8 ++++ .../uapi/v4l/vidioc-subdev-g-selection.rst | 8 ++++ 8 files changed, 94 insertions(+) diff --git a/Documentation/media/kapi/v4l2-subdev.rst b/Documentation/media/kapi/v4l2-subdev.rst index 41ccb3e5c707..6ced2381952a 100644 --- a/Documentation/media/kapi/v4l2-subdev.rst +++ b/Documentation/media/kapi/v4l2-subdev.rst @@ -332,6 +332,50 @@ Private ioctls All ioctls not in the above list are passed directly to the sub-device driver through the core::ioctl operation. +Read-only sub-device userspace API +---------------------------------- + +Bridge drivers that control their connected subdevices through direct calls to +the kernel API realized by :c:type:`v4l2_subdev_ops` structure do not usually +want userspace to be able to change the same parameters through the subdevice +device node and thus do not usually register any. + +It is sometimes useful to report to userspace the current subdevice +configuration through a read-only API, that does not permit applications to +change to the device parameters but allows interfacing to the subdevice device +node to inspect them. + +For instance, to implement cameras based on computational photography, userspace +needs to know the detailed camera sensor configuration (in terms of skipping, +binning, cropping and scaling) for each supported output resolution. To support +such use cases, bridge drivers may expose the subdevice operations to userspace +through a read-only API. + +To create a read-only device node for all the subdevices registered with the +``V4L2_SUBDEV_FL_HAS_DEVNODE`` set, the :c:type:`v4l2_device` driver should call +:c:func:`v4l2_device_register_ro_subdev_nodes`. + +Access to the following ioctls for userspace applications is restricted on +sub-device device nodes registered with +:c:func:`v4l2_device_register_ro_subdev_nodes`. + +``VIDIOC_SUBDEV_S_FMT``, +``VIDIOC_SUBDEV_S_CROP``, +``VIDIOC_SUBDEV_S_SELECTION``: + + These ioctls are only allowed on a read-only subdevice device node + for the :ref:`V4L2_SUBDEV_FORMAT_TRY ` + formats and selection rectangles. + +``VIDIOC_SUBDEV_S_FRAME_INTERVAL``, +``VIDIOC_SUBDEV_S_DV_TIMINGS``, +``VIDIOC_SUBDEV_S_STD``: + + These ioctls are not allowed on a read-only subdevice node. + +In case the ioctl is not allowed, or the format to modify is set to +``V4L2_SUBDEV_FORMAT_ACTIVE``, the core returns a negative error code and +the errno variable is set to ``-EPERM``. I2C sub-device drivers ---------------------- diff --git a/Documentation/media/uapi/v4l/dev-subdev.rst b/Documentation/media/uapi/v4l/dev-subdev.rst index 029bb2d9928a..d665366056a9 100644 --- a/Documentation/media/uapi/v4l/dev-subdev.rst +++ b/Documentation/media/uapi/v4l/dev-subdev.rst @@ -39,6 +39,11 @@ will feature a character device node on which ioctls can be called to Sub-device character device nodes, conventionally named ``/dev/v4l-subdev*``, use major number 81. +Drivers may opt to limit the sub-device character devices to only expose +operations that do not modify the device state. In such a case the sub-devices +are referred to as ``read-only`` in the rest of this documentation, and the +related restrictions are documented in individual ioctls. + Controls ======== diff --git a/Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst b/Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst index e36dd2622857..611f94e4510a 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst @@ -57,6 +57,10 @@ pointer to the struct :c:type:`v4l2_dv_timings` structure as argument. If the ioctl is not supported or the timing values are not correct, the driver returns ``EINVAL`` error code. +Calling ``VIDIOC_SUBDEV_S_DV_TIMINGS`` on a subdev device node that has been +registered in read-only mode is not allowed. An error is returned and the errno +variable is set to ``-EPERM``. + The ``linux/v4l2-dv-timings.h`` header can be used to get the timings of the formats in the :ref:`cea861` and :ref:`vesadmt` standards. If the current input or output does not support DV timings (e.g. if @@ -81,6 +85,8 @@ ENODATA EBUSY The device is busy and therefore can not change the timings. +EPERM + ``VIDIOC_SUBDEV_S_DV_TIMINGS`` has been called on a read-only subdevice. .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| diff --git a/Documentation/media/uapi/v4l/vidioc-g-std.rst b/Documentation/media/uapi/v4l/vidioc-g-std.rst index e633e42e3910..e220b38b859f 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-std.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-std.rst @@ -66,6 +66,9 @@ video timings (e.g. if :ref:`VIDIOC_ENUMINPUT` does not set the ``V4L2_IN_CAP_STD`` flag), then ``ENODATA`` error code is returned. +Calling ``VIDIOC_SUBDEV_S_STD`` on a subdev device node that has been registered +in read-only mode is not allowed. An error is returned and the errno variable is +set to ``-EPERM``. Return Value ============ @@ -79,3 +82,6 @@ EINVAL ENODATA Standard video timings are not supported for this input or output. + +EPERM + ``VIDIOC_SUBDEV_S_STD`` has been called on a read-only subdevice. diff --git a/Documentation/media/uapi/v4l/vidioc-subdev-g-crop.rst b/Documentation/media/uapi/v4l/vidioc-subdev-g-crop.rst index 632ee053accc..307b80c4b543 100644 --- a/Documentation/media/uapi/v4l/vidioc-subdev-g-crop.rst +++ b/Documentation/media/uapi/v4l/vidioc-subdev-g-crop.rst @@ -73,6 +73,11 @@ crop rectangles and stored in the sub-device file handle. Two applications querying the same sub-device would thus not interact with each other. +If the subdev device node has been registered in read-only mode, calls to +``VIDIOC_SUBDEV_S_CROP`` are only valid if the ``which`` field is set to +``V4L2_SUBDEV_FORMAT_TRY``, otherwise an error is returned and the errno +variable is set to ``-EPERM``. + Drivers must not return an error solely because the requested crop rectangle doesn't match the device capabilities. They must instead modify the rectangle to match what the hardware can provide. The @@ -123,3 +128,7 @@ EINVAL references a non-existing pad, the ``which`` field references a non-existing format, or cropping is not supported on the given subdev pad. + +EPERM + The ``VIDIOC_SUBDEV_S_CROP`` ioctl has been called on a read-only subdevice + and the ``which`` field is set to ``V4L2_SUBDEV_FORMAT_ACTIVE``. diff --git a/Documentation/media/uapi/v4l/vidioc-subdev-g-fmt.rst b/Documentation/media/uapi/v4l/vidioc-subdev-g-fmt.rst index 472577bd1745..b811c68d2d3d 100644 --- a/Documentation/media/uapi/v4l/vidioc-subdev-g-fmt.rst +++ b/Documentation/media/uapi/v4l/vidioc-subdev-g-fmt.rst @@ -78,6 +78,11 @@ current links configuration or sub-device controls value. For instance, a low-pass noise filter might crop pixels at the frame boundaries, modifying its output frame size. +If the subdev device node has been registered in read-only mode, calls to +``VIDIOC_SUBDEV_S_FMT`` are only valid if the ``which`` field is set to +``V4L2_SUBDEV_FORMAT_TRY``, otherwise an error is returned and the errno +variable is set to ``-EPERM``. + Drivers must not return an error solely because the requested format doesn't match the device capabilities. They must instead modify the format to match what the hardware can provide. The modified format @@ -146,6 +151,9 @@ EINVAL ``pad`` references a non-existing pad, or the ``which`` field references a non-existing format. +EPERM + The ``VIDIOC_SUBDEV_S_FMT`` ioctl has been called on a read-only subdevice + and the ``which`` field is set to ``V4L2_SUBDEV_FORMAT_ACTIVE``. ============ diff --git a/Documentation/media/uapi/v4l/vidioc-subdev-g-frame-interval.rst b/Documentation/media/uapi/v4l/vidioc-subdev-g-frame-interval.rst index 4b1b4bc78bfe..34aa39096e3d 100644 --- a/Documentation/media/uapi/v4l/vidioc-subdev-g-frame-interval.rst +++ b/Documentation/media/uapi/v4l/vidioc-subdev-g-frame-interval.rst @@ -65,6 +65,10 @@ struct contains the current frame interval as would be returned by a ``VIDIOC_SUBDEV_G_FRAME_INTERVAL`` call. +Calling ``VIDIOC_SUBDEV_S_FRAME_INTERVAL`` on a subdev device node that has been +registered in read-only mode is not allowed. An error is returned and the errno +variable is set to ``-EPERM``. + Drivers must not return an error solely because the requested interval doesn't match the device capabilities. They must instead modify the interval to match what the hardware can provide. The modified interval @@ -118,3 +122,7 @@ EINVAL :c:type:`v4l2_subdev_frame_interval` ``pad`` references a non-existing pad, or the pad doesn't support frame intervals. + +EPERM + The ``VIDIOC_SUBDEV_S_FRAME_INTERVAL`` ioctl has been called on a read-only + subdevice. diff --git a/Documentation/media/uapi/v4l/vidioc-subdev-g-selection.rst b/Documentation/media/uapi/v4l/vidioc-subdev-g-selection.rst index fc73d27e6d74..feba9f807135 100644 --- a/Documentation/media/uapi/v4l/vidioc-subdev-g-selection.rst +++ b/Documentation/media/uapi/v4l/vidioc-subdev-g-selection.rst @@ -53,6 +53,10 @@ function of the crop API, and more, are supported by the selections API. See :ref:`subdev` for more information on how each selection target affects the image processing pipeline inside the subdevice. +If the subdev device node has been registered in read-only mode, calls to +``VIDIOC_SUBDEV_S_SELECTION`` are only valid if the ``which`` field is set to +``V4L2_SUBDEV_FORMAT_TRY``, otherwise an error is returned and the errno +variable is set to ``-EPERM``. Types of selection targets -------------------------- @@ -123,3 +127,7 @@ EINVAL ``pad`` references a non-existing pad, the ``which`` field references a non-existing format, or the selection target is not supported on the given subdev pad. + +EPERM + The ``VIDIOC_SUBDEV_S_SELECTION`` ioctl has been called on a read-only + subdevice and the ``which`` field is set to ``V4L2_SUBDEV_FORMAT_ACTIVE``.