diff mbox series

[v6,02/14] videobuf2: add cache management members

Message ID 20200514160153.3646-3-sergey.senozhatsky@gmail.com (mailing list archive)
State New, archived
Headers show
Series Implement V4L2_BUF_FLAG_NO_CACHE_* flags | expand

Commit Message

Sergey Senozhatsky May 14, 2020, 4:01 p.m. UTC 
From: Sergey Senozhatsky <senozhatsky@chromium.org>

Extend vb2_buffer and vb2_queue structs with cache management
members.

V4L2 UAPI already contains two buffer flags which user-space,
supposedly, can use to control buffer cache sync:

- V4L2_BUF_FLAG_NO_CACHE_INVALIDATE
- V4L2_BUF_FLAG_NO_CACHE_CLEAN

None of these, however, do anything at the moment. This patch
set is intended to change it.

Since user-space cache management hints are supposed to be
implemented on a per-buffer basis we need to extend vb2_buffer
struct with two new members ->need_cache_sync_on_prepare and
->need_cache_sync_on_finish, which will store corresponding
user-space hints.

In order to preserve the existing behaviour, user-space cache
managements flags will be handled only by those drivers that
permit user-space cache hints. That's the purpose of vb2_queue
->allow_cache_hints member. Driver must set ->allow_cache_hints
during queue initialisation to enable cache management hints
mechanism.

Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
---
 include/media/videobuf2-core.h | 10 ++++++++++
 1 file changed, 10 insertions(+)
diff mbox series

Patch

diff --git a/include/media/videobuf2-core.h b/include/media/videobuf2-core.h
index 9e522bd2acc7..7f39d9fffc8c 100644
--- a/include/media/videobuf2-core.h
+++ b/include/media/videobuf2-core.h
@@ -263,6 +263,10 @@  struct vb2_buffer {
 	 *			after the 'buf_finish' op is called.
 	 * copied_timestamp:	the timestamp of this capture buffer was copied
 	 *			from an output buffer.
+	 * need_cache_sync_on_prepare: when set buffer's ->prepare() function
+	 *			performs cache sync/invalidation.
+	 * need_cache_sync_on_finish: when set buffer's ->finish() function
+	 *			performs cache sync/invalidation.
 	 * queued_entry:	entry on the queued buffers list, which holds
 	 *			all buffers queued from userspace
 	 * done_entry:		entry on the list that stores all buffers ready
@@ -273,6 +277,8 @@  struct vb2_buffer {
 	unsigned int		synced:1;
 	unsigned int		prepared:1;
 	unsigned int		copied_timestamp:1;
+	unsigned int		need_cache_sync_on_prepare:1;
+	unsigned int		need_cache_sync_on_finish:1;
 
 	struct vb2_plane	planes[VB2_MAX_PLANES];
 	struct list_head	queued_entry;
@@ -491,6 +497,9 @@  struct vb2_buf_ops {
  * @uses_requests: requests are used for this queue. Set to 1 the first time
  *		a request is queued. Set to 0 when the queue is canceled.
  *		If this is 1, then you cannot queue buffers directly.
+ * @allow_cache_hints: when set user-space can pass cache management hints in
+ *		order to skip cache flush/invalidation on ->prepare() or/and
+ *		->finish().
  * @lock:	pointer to a mutex that protects the &struct vb2_queue. The
  *		driver can set this to a mutex to let the v4l2 core serialize
  *		the queuing ioctls. If the driver wants to handle locking
@@ -567,6 +576,7 @@  struct vb2_queue {
 	unsigned int			requires_requests:1;
 	unsigned int			uses_qbuf:1;
 	unsigned int			uses_requests:1;
+	unsigned int			allow_cache_hints:1;
 
 	struct mutex			*lock;
 	void				*owner;