From patchwork Thu Jun 11 16:16:45 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jacopo Mondi X-Patchwork-Id: 11600401 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 0441B1392 for ; Thu, 11 Jun 2020 16:13:48 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id E6B5B2078D for ; Thu, 11 Jun 2020 16:13:47 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726369AbgFKQNr (ORCPT ); Thu, 11 Jun 2020 12:13:47 -0400 Received: from relay6-d.mail.gandi.net ([217.70.183.198]:35593 "EHLO relay6-d.mail.gandi.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726331AbgFKQNq (ORCPT ); Thu, 11 Jun 2020 12:13:46 -0400 X-Originating-IP: 93.34.118.233 Received: from uno.lan (93-34-118-233.ip49.fastwebnet.it [93.34.118.233]) (Authenticated sender: jacopo@jmondi.org) by relay6-d.mail.gandi.net (Postfix) with ESMTPSA id D62ABC000C; Thu, 11 Jun 2020 16:13:42 +0000 (UTC) From: Jacopo Mondi To: mchehab@kernel.org, hverkuil-cisco@xs4all.nl, sakari.ailus@linux.intel.com, laurent.pinchart@ideasonboard.com Cc: Jacopo Mondi , niklas.soderlund+renesas@ragnatech.se, kieran.bingham@ideasonboard.com, dave.stevenson@raspberrypi.com, hyun.kwon@xilinx.com, linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org Subject: [PATCH v4 3/9] media: i2c: ov6650: Use new [get|set]_mbus_config ops Date: Thu, 11 Jun 2020 18:16:45 +0200 Message-Id: <20200611161651.264633-4-jacopo+renesas@jmondi.org> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20200611161651.264633-1-jacopo+renesas@jmondi.org> References: <20200611161651.264633-1-jacopo+renesas@jmondi.org> MIME-Version: 1.0 Sender: linux-media-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org Use the new get_mbus_config and set_mbus_config pad operations in place of the video operations currently in use. Compared to other drivers where the same conversion has been performed, ov6650 proved to be a bit more tricky, as the existing g_mbus_config implementation did not report the currently applied configuration but the set of all possible configuration options. Adapt the driver to support the semantic of the two newly introduced operations: - get_mbus_config reports the current media bus configuration - set_mbus_config applies only changes explicitly requested and updates the provided cfg parameter to report what has actually been applied to the hardware. Compile-tested only. Signed-off-by: Jacopo Mondi Reported-by: kernel test robot --- drivers/media/i2c/ov6650.c | 56 ++++++++++++++++++++++++++------------ 1 file changed, 39 insertions(+), 17 deletions(-) diff --git a/drivers/media/i2c/ov6650.c b/drivers/media/i2c/ov6650.c index 91906b94f978..efc798bac3a4 100644 --- a/drivers/media/i2c/ov6650.c +++ b/drivers/media/i2c/ov6650.c @@ -921,46 +921,68 @@ static const struct v4l2_subdev_core_ops ov6650_core_ops = { }; /* Request bus settings on camera side */ -static int ov6650_g_mbus_config(struct v4l2_subdev *sd, - struct v4l2_mbus_config *cfg) +static int ov6650_get_mbus_config(struct v4l2_subdev *sd, + unsigned int pad, + struct v4l2_mbus_config *cfg) { + struct i2c_client *client = v4l2_get_subdevdata(sd); + u8 comj, comf; + int ret; + + ret = ov6650_reg_read(client, REG_COMJ, &comj); + if (ret) + return ret; - cfg->flags = V4L2_MBUS_MASTER | - V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_PCLK_SAMPLE_FALLING | - V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_LOW | - V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_LOW | - V4L2_MBUS_DATA_ACTIVE_HIGH; + ret = ov6650_reg_read(client, REG_COMF, &comf); + if (ret) + return ret; + + cfg->flags = V4L2_MBUS_MASTER + | (comj & COMJ_VSYNC_HIGH ? V4L2_MBUS_VSYNC_ACTIVE_HIGH + : V4L2_MBUS_VSYNC_ACTIVE_LOW) + | (comf & COMF_HREF_LOW ? V4L2_MBUS_HSYNC_ACTIVE_LOW + : V4L2_MBUS_HSYNC_ACTIVE_HIGH) + | (comj & COMJ_PCLK_RISING ? V4L2_MBUS_PCLK_SAMPLE_RISING + : V4L2_MBUS_PCLK_SAMPLE_FALLING); cfg->type = V4L2_MBUS_PARALLEL; return 0; } /* Alter bus settings on camera side */ -static int ov6650_s_mbus_config(struct v4l2_subdev *sd, - const struct v4l2_mbus_config *cfg) +static int ov6650_set_mbus_config(struct v4l2_subdev *sd, + unsigned int pad, + struct v4l2_mbus_config *cfg) { struct i2c_client *client = v4l2_get_subdevdata(sd); - int ret; + int ret = 0; if (cfg->flags & V4L2_MBUS_PCLK_SAMPLE_RISING) ret = ov6650_reg_rmw(client, REG_COMJ, COMJ_PCLK_RISING, 0); - else + else if (cfg->flags & V4L2_MBUS_PCLK_SAMPLE_FALLING) ret = ov6650_reg_rmw(client, REG_COMJ, 0, COMJ_PCLK_RISING); if (ret) - return ret; + goto error; if (cfg->flags & V4L2_MBUS_HSYNC_ACTIVE_LOW) ret = ov6650_reg_rmw(client, REG_COMF, COMF_HREF_LOW, 0); - else + else if (cfg->flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) ret = ov6650_reg_rmw(client, REG_COMF, 0, COMF_HREF_LOW); if (ret) - return ret; + goto error; if (cfg->flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH) ret = ov6650_reg_rmw(client, REG_COMJ, COMJ_VSYNC_HIGH, 0); - else + else if (cfg->flags & V4L2_MBUS_VSYNC_ACTIVE_LOW) ret = ov6650_reg_rmw(client, REG_COMJ, 0, COMJ_VSYNC_HIGH); +error: + /* + * Update the configuration to report what is actually applied to + * the hardware. + */ + ov6650_get_mbus_config(sd, pad, cfg); + return ret; } @@ -968,8 +990,6 @@ static const struct v4l2_subdev_video_ops ov6650_video_ops = { .s_stream = ov6650_s_stream, .g_frame_interval = ov6650_g_frame_interval, .s_frame_interval = ov6650_s_frame_interval, - .g_mbus_config = ov6650_g_mbus_config, - .s_mbus_config = ov6650_s_mbus_config, }; static const struct v4l2_subdev_pad_ops ov6650_pad_ops = { @@ -978,6 +998,8 @@ static const struct v4l2_subdev_pad_ops ov6650_pad_ops = { .set_selection = ov6650_set_selection, .get_fmt = ov6650_get_fmt, .set_fmt = ov6650_set_fmt, + .get_mbus_config = ov6650_get_mbus_config, + .set_mbus_config = ov6650_set_mbus_config, }; static const struct v4l2_subdev_ops ov6650_subdev_ops = {